When Shut Down Later, The Update Tries To Install And The Installation Hangs?
Mar 3, 2012
1) Download Cumulative Security Update for Internet Explorer 8 for Windows 7 (KB2647516)
2) PC crashes while making a restore point.3) Reboot - normal startup. But when I shut down later, the update tries to install and the installation hangs. After disc activity ceases, I shut down manually.4) Reboot - normal startup.At this point, I decided to use System Restore to clean out any residue from the failed install before downloading the patch again. Yup, you guessed it, I used the damaged restore point. D'oh!5) PC reboots as part of restore process - I get a startup error.6) Scan for problems - attempt repair - recieve the following error. "StartRep.exe Application Error. The instruction at 0x75bc9a45 referenced memory at 0x538e0e85. The memory could not be read"7) I try to restore to an earlier point, but the restore fails."System Restore failed while mounting the registry from the restore point. Unspecified error (0x80070020)"8) I close System Restore window and PC reboots automatically - normal startup.9) I recieve a notification from "Solve PC Issues" in the taskbar saying Microsoft Security Essentials is out of date and would I like to update?
So here I am. My PC appears to be running smoothly, but I don't know if there's any hidden damage in the system. I still want to clear out any residue from the failed install before I download the patch again, but now I'm wary of using System Restore. Also, the MSE update notification has me puzzled - the last restore point I tried to restore to preceeded an MSE definitions update, but that restore failed (didn't it?) and anyway, I don't normally recieve definitions update notifications from "Solve PC Issues". This las left me unsure where my system is at restore point-wise right now.
I had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.
I attempted a windows 7 install on an x64 and x32 system several times with the same result. The Upgrade runs until the last stage and then hangs. I looked at the logs but didn't see any errors. All my systems are custom built using Vista ultimate OEM additions.I was successful installing the software as a new install.I updated all the drivers.
My daughters CQ61 required a clean install after repair. Windows 7 jus goes through the normal install process and hangs at completeing installation. I'm not a Noob but not a Geek either. I can only assume the drive is fine as it is running fine in the T400 IMB i am using now. Now here is the strange bit..... When i was just starting out i to had a CQ61 and it too needed a clean install and it did the same for months with friends in th know looking and trying to. In the end i send off for the factory software discs and tey went on straight away with win7 working fine. It was literally restored to new. I passed on said disks when i sold said CQ61 adising the guy never to go down the road i had. Now the software discs are no longer available from HP and There is none on torrents anywhere. I cannot accept that this is the only way to install clean install. If it was that critical to have the discs they would send them out with the new machine. So thats muti attempts by multiple people on 2 identical machines presenting the same hang. One was solved with the Sowfwaredisks provided by HP and are no longer available. Should have copied them i know but never thought i would be looking down the same barrel of the same gun.
I have Toshiba satellite L645, win7 home premium; ram 2GB, 32bit. HD 150GB (119 Free)Lately when I shut down the laptop it just hangs there (NOT ALL THE TIME) telling me: shutting down but if I don't hit the button it will go on forever. Once a let it go for about 1hr and at the end I had to hit the button. I don't get any error what so ever.
I'm at my whit's end with this. My PC shuts down fine but hangs on restart. It does this is both safe and normal mode. It appears to hang right before the HD would get turned off. The SHUTTING DOWN screen proceeds fine and the HD stops it's activity, the screen goes black (the HD light stays) and it just hangs there. Pressing the RESET button on the PC starts it up fine. If I am restarting from some utility (for example when installing Windows) it can hang with the RESTARTING WINDOWS screen.
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
First off, let me say that I realize that turn off my computer during the update configuration was a terrible idea.Anyway, there isn't much I can say besides that my computer just won't start up. I've tried safe mode, I've tried system restores, but they both failed. I'd supply you with crash logs, but I'm not entirely sure how.All attempts at a system restore failed and came up as an error, and when I tried to do a disk check, it said my disc was write protected.Let me know if there is any more information I can supply.
I tried to shut down my laptop, the "Installing update, do not shut down or power off your computer" screen appears but my battery died during the update. And now when I startup the "Launch start up repair" appears and when i click it, I get stuck on a blue flower wallpaper screen thing and nothing appears. All i can see is the wallpaper and the mouse cursor.
i have a dell latitude d430 and I accidentally shut it down whilst it was configuring updates.Now, when turning on all i get is the 'configuring updates stage 3 of 3 0% complete' and then it appears to restart and do it all over again.
This is a nightmare, after solving the first problem I had, where the installation gets stuck in 'Copying windows files' (I had to disable the floppy disk from the BIOS, even not having floppy disk physically).
Now all the files are copied and extended properly, but when showing the screen saying that the system is going to reboot, the installation freeze. It never reboot.
Then I do a hardware reboot, Windows 7 loads ok, but in the screen that reads "Completing installation..." the process never ends.
I've seen (through shift+F10) that the log file 'setupapi.dev.log' reads something like it is looking for a driver for a pci.. but don't know what it means.
I am helping out a friend by re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios.When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space
I have a Toshiba L505-L5007 laptop and a while back the audio went out on it. After days of trying to find the problem to no avail, I was advised to try a complete factory restore because the person thought it was an OS issue. Well, now I try to restore it to factory settings but the OS hangs at the configuration screen on the 5th reboot. Is there something that I might have overlooked? I've tried scouring the internet for people with the same problems, but I can't seem to find anyone with the same problem. I've also tried upgrading the BIOS in case there was a problem there keeping Windows 7 from installing. Right now the laptop will come on, and only runs well in any of the safe modes, if I try to boot it normally it'll try to finish the installation and freeze.
I have just installed a new hard drive to my computer as well as a fresh install of Windows 7,to my surprise after updating everything and installing programs, my computer suddenly hangs and crashes, after time this developed into BSOD,which now constantly happens. Not entirely sure why, whether it's a driver issue or what. If anyone can look into this and help my problem then.
I currently have 2 physical systems.I am trying to migrate over to the new system which has new hardware etc...Currently my existing system is running absolutely fine. WS2008R2 EE 64bit with all updates. The drives are SATA (there are physical disks on the system and none of them are RAID)my new system is using an Asus p6x58D-E mobo and has 1 SSD SATA as a bootable drive. I also have 3 other phyiscal disks on this system and one of them is a RAID0 (2x2TB non bootable).after 3 days and nights of clean installation (as I thought I was doing something unsupported... I install Windows on the SSD I create the RAID0 system on the 2x2TB HDD I install the drivers (chipset, graphics, mobo and SATA/RAID). I then do Windows update.it finds 92 updates + 1 update for the onboard LAN.I install them but in the end it fails to install saying that there were installations in progress and should reboot to complete the updates.So I reboot and it gets into Windows doing some configuring, and then it restarts again. Then it just says:"Stage 3 of 3. Preparing to configure Windows. Do not turn off your computer And the progress is just going round and round. The system is not locked or anything. the new system has an i7 core Extreme 990x 3.46GHz gulftown CPU. right now, its just there... "configuring".
I have a problem with Windows 7. I restarted the computer to finish installing updates, and when the welcome screen came up, the computer gets stuck there. I tried restarting the computer again, and it did the same thing. This started happening after installing updates. Safe mode works fine so I don't know what to do.
Ok over the past week or so windows has been installing the same 3 updates every night! Windows 7 Home Premium 64Bit
So I checked to see if they failed and they were installed successfully!
I have ran 3 different MS Fixit things to no avail. I have tried to update the PC manually however it does not go past 0% on installing the updates it just says preparing updates.
I tried adding 2 optional updates to make it 5 and manually clicking update however it sticks on 0% downloading updates.
I am usually pretty good at troubleshooting and fixing PC problems however this one I am defeated! I do not want to restore if possible, will this take away ANY of my files e.g work I have done I have never had to do it before!
I tried loading windows 7 on my Dell Inspiron Mini, it says completing installation but after an hour it doesn't change, windows 7 hangs up on installation.
I thought I'd move with the times and picked up a copy of Windows 7 Ultimate. I had Vista installed before.
Booted from CD, delete/recreate partition and did a clean install.
The installer hangs on a black screen after the first reboot. Even left it overnight without progress. Forcing a reboot and going into Safe Mode the setup tries to continue, then comes up with a prompt saying 'Setup cannot run in Safe mode, rebooting your computer', whereupon it hangs again.
This is the sequence I tried:
1. Boot from CD, delete boot partition, new partition, clean install (HUNG)
2. Disconnect router, then as 1. (HANG)
3. Reset BIOS to factory defaults, then as 1. (HANG)
4. Disconnect external hard drive and printer, then as 1. (HANG)
5. Disabled on-board chips like sound, legacy USB etc, then as 1. (HANG)
I've tried booting to the CD and doing a 'repair windows' but that comes back without problems.
The only other thing I could think of is that the graphics card is incompatible... but I don't have onboard VGA and I don't have another card just lying around.
I've never had a problem doing a clean Windows install. I'm really disappointed they're making it so difficult. Does anyone have any suggestions? I might have to just go back to Vista...
System hangs after installations like Windows 7 update,tune up utilities,new hardwares(data cards) etc which requires windows restart.windows hangs and blue screen appears after several minutes.Pls help. [code]
My windows 7 computer hung when i started it the other day. The startup repair did not work after several attempts. I tried to choose an old restore point and it gave me a message "you must enable protection on this drive" Problem was, it did not allow me to check the drive box or give any option to enable protection....So, i started a system restore of the software, keeping data intact. It did its thing and presented a message "setup could not install windows on this systems hardware" It then reboots and comes back with " windows could not complete the installation. To install windows on this computer, restart the installation." It just keeps rebooting and returning this message....i cannot restart the installation.... the only other info i got was after the initial startup repair it said this :
System disk=devicehardisk0 windows directory = d:windows autock = 0 number of root causes = 1
this all happend after a critical windows update by the way....
Just bought a new hard drive due to my old one was failing. This is the same exact hard drive I had.Whenever I try installing windows 7, it "completes", then the screen blinks skips, and skips the "Create a user account" and just hangs at "Completing Installation". I thought I would give it a try and disable my gfx driver just to see if that would work.
My Dad is having problems upgrading to Windows 7 from the original Vista installation on his Medion MD8833 PC, using a Windows 7 Home Premium Upgrade Edition disk. He first tried the upgrade route from Vista and this seemed to go OK, until after the second or third reboot it would get to a point and then freeze at a blank screen, with the mouse cursor still visible. If left for a long period of time, the PC appears to go into sleep mode. Attempts to reboot at this point make it look like Windows 7 has been installed, at least partially, as it'll go through the usual Windows 7 load-up splash screens but he's unable to get to the part of the process where you have to enter your Windows 7 serial key or start setting up user accounts etc. He's tried F8 and booting into Safe Mode and various other modes but had no success here either. This often results in being told the installation process has not completed and attempts to revert to Vista are started. He's even resorted to wiping the hard drive completely (inc. recovery partition) and doing a fresh install, but has exactly the same problems.
Windows XP used to give you the option to shut down your PC without installing Windows updates or to choose to shut it down and install updates,but this feature seems to be missing in Windows 7.One of my PC's runs Windows 7 Professional and it also comes with the Group policy Editor (gpdeit.msc) that can be used to tweak the registry so that you get the option to shut down with/without installing updates. It is fairly straightforward to do.However another of my PC's runs Windows 7 Home and it does not come with gpedit.msc.I downloaded the Group Policy Settings References for Windows 7 and Windows Server Excel file (Download: Group Policy Settings Reference for Windows and Windows Server - Microsoft Download Center - Download Details), and scrolled down to the Windows Updates lines at the end of the Administrative Templates tab; but I was unable to find the registry references in my registry. Specifically in order to enable "Do Not Adjust Default Option to Install Updates and Shut Down", I could not find the registry entries listed in the spreadsheet under either the HKCU or HKLM portions of my registry.
The system started an update and in spite of the warning not to turn the computer off, the update got interrupted.The restart has been 'Preparing Your Desktop' for about 2 hours with no diagnostics or any indicators.
I am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
I just installed a retail copy of win 7 on my laptop and have been experiencing some issues. At first everything worked fine but out of the blue my desktop/folders have not been auto-refreshing. Whenever I try to delete or create a new folder I have to manually refresh to the folder in order to view it. When shutting down my laptop it takes 5+ minutes and when my desktop is loading after booting up the laptop it takes several minutes for everything to load and for the win 7 chime.
Finally, it won't allow me to update. When I try to use the windows updater it hangs for a while on "creating restoring point" (which may be normal) but then permanently hangs on installing update 1/16 at 0%. If I try canceling the update nothing happens and even when I try to shut down the laptop it attempts to install the updates but hangs on update 1/16.
From researching these issues I've realized that the auto-refresh problem is not uncommon and has something to do with a network. This may be unrelated but these problems only started to occur when I was transferring pictures via a USB stick.
I am building two servers with identical hardware ... Intel S5520HCT mother board, dual Xeon E5607 2.26GHz, Seagate SATA 2TB drive, 8GB Crucial memory and OCZ Agility SSD drives. I am using the onboard video and motherboard has been update with the latest BIOS.
But when I install Windows 7 Pro 64 to 50GB partition on the SATA drive, or to a single partition SSD ... the system hangs after the final reboot right after "Updating Registry" and "Starting Services" during the "Completing Installation" phase. The next input should be username and computer name ... but it never gets to that.
I have minimum hardware attached ... disabled networking in BIOS ... and tried with a number of different memory configurations ... etc .. etc ... but still the same result .. and I am now totally clueless. I even tested all my hardware on a Tyan S7025 board ... and there it installs without any issues.
I have a custom built pc, has quad core phenom processor 4gb ram. Gigabyte motherboard 500gb hard drive with windows 8 preview installed. And a formatted 250gb. I'm trying to install windows 7 on the formatted drive but every time off cd hangs on expanding files. So I thought I'd try USB stick. Got a 16gb cruzer blade. Formatted and made bootable. Windows on it. Will start via my computer but whenever I try booting it on standup I get an error about not being digitally signed. I've tried numerous things but will not boot from USB.
I just bought a Toshiba laptop that has Windows 7 Home Premium 64 bit installed on it. I have tried several times to install Office 2007 but for whatever reason it gets probably about 70 percent done and then it just hangs. At first I thought it was because the CPU sitting at 80-90 percent even before installing. I found some .NET services that were using up alot of that CPU so I disabled them and tried installing again but I still hung. I am getting no error messages so right now I am at a loss.
