Windows 7 Installation Hangs Before Final Set-up TSage

Feb 3, 2010

My Dad is having problems upgrading to Windows 7 from the original Vista installation on his Medion MD8833 PC, using a Windows 7 Home Premium Upgrade Edition disk. He first tried the upgrade route from Vista and this seemed to go OK, until after the second or third reboot it would get to a point and then freeze at a blank screen, with the mouse cursor still visible. If left for a long period of time, the PC appears to go into sleep mode. Attempts to reboot at this point make it look like Windows 7 has been installed, at least partially, as it'll go through the usual Windows 7 load-up splash screens but he's unable to get to the part of the process where you have to enter your Windows 7 serial key or start setting up user accounts etc. He's tried F8 and booting into Safe Mode and various other modes but had no success here either. This often results in being told the installation process has not completed and attempts to revert to Vista are started. He's even resorted to wiping the hard drive completely (inc. recovery partition) and doing a fresh install, but has exactly the same problems.

View 8 Replies


ADVERTISEMENT

Windows 7 Installation Goes Black On Final Step?

Sep 10, 2010

the other day i got my computer together and started installing Windows 7 and when i hade rebooted and were on the final step it suddenly appeard white squares all over the screen and then it got black :S have been waiting like 3-4h now, anyone have a solution to my problem I heard that it could be bad ram so i took out one of em and installed Windows 7 again but I had the same problem again. then I took out the one that was there and put in the other one but same thing happend , is both broken or is it maybe something else ?Processor : intel i7 860Grafikkort : Geforce 9800gtx +moderkort gigabyte GA-P55A-UD4 P55 S-1156 ATX

View 9 Replies View Related

"Final Result: Installation Failed With Error Code: (0x80070643)

Jan 1, 2012

I am trying to install Microsoft Network Framework v.4 (x64) and I keep getting error "Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation" (Elapsed time: 0 00:01:01)." The exact log file is attached: Code: OS Version Information:

OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Ultimate Edition Service Pack 1
OS Version Information

[code].....

View 3 Replies View Related

Installation Hangs At Start Of Windows 7 Installation

Jun 2, 2011

I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?

View 9 Replies View Related

Windows 7 Installation Hangs?

Mar 19, 2011

I am helping out a friend by re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios.When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space

View 4 Replies View Related

Windows 7 Hangs Up On Completing Installation?

Feb 1, 2013

I tried loading windows 7 on my Dell Inspiron Mini, it says completing installation but after an hour it doesn't change, windows 7 hangs up on installation.

View 1 Replies View Related

New Hard Drive - Windows 7 Installation Hangs?

Jun 7, 2012

Just bought a new hard drive due to my old one was failing. This is the same exact hard drive I had.Whenever I try installing windows 7, it "completes", then the screen blinks skips, and skips the "Create a user account" and just hangs at "Completing Installation". I thought I would give it a try and disable my gfx driver just to see if that would work.

View 9 Replies View Related

Windows 7 Installation Hangs At (Setup Is Starting) Screen

Mar 22, 2011

I am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.

View 14 Replies View Related

Windows 7 Pro 64 Hangs During Installation On Intel S5520HCT Server Board

Mar 17, 2012

I am building two servers with identical hardware ... Intel S5520HCT mother board, dual Xeon E5607 2.26GHz, Seagate SATA 2TB drive, 8GB Crucial memory and OCZ Agility SSD drives. I am using the onboard video and motherboard has been update with the latest BIOS.

But when I install Windows 7 Pro 64 to 50GB partition on the SATA drive, or to a single partition SSD ... the system hangs after the final reboot right after "Updating Registry" and "Starting Services" during the "Completing Installation" phase. The next input should be username and computer name ... but it never gets to that.

I have minimum hardware attached ... disabled networking in BIOS ... and tried with a number of different memory configurations ... etc .. etc ... but still the same result .. and I am now totally clueless. I even tested all my hardware on a Tyan S7025 board ... and there it installs without any issues.

View 9 Replies View Related

Windows 7 Installation On Formatted Drive - CD Hangs On Expanding Files

Feb 10, 2013

I have a custom built pc, has quad core phenom processor 4gb ram. Gigabyte motherboard 500gb hard drive with windows 8 preview installed. And a formatted 250gb. I'm trying to install windows 7 on the formatted drive but every time off cd hangs on expanding files. So I thought I'd try USB stick. Got a 16gb cruzer blade. Formatted and made bootable. Windows on it. Will start via my computer but whenever I try booting it on standup I get an error about not being digitally signed. I've tried numerous things but will not boot from USB.

View 3 Replies View Related

Office 2007 Installation Hangs At 70 Percent On Windows 7 64bit

Jun 25, 2011

I just bought a Toshiba laptop that has Windows 7 Home Premium 64 bit installed on it. I have tried several times to install Office 2007 but for whatever reason it gets probably about 70 percent done and then it just hangs. At first I thought it was because the CPU sitting at 80-90 percent even before installing. I found some .NET services that were using up alot of that CPU so I disabled them and tried installing again but I still hung. I am getting no error messages so right now I am at a loss.

View 1 Replies View Related

Installation Hangs BEFORE 1st Reboot

Oct 31, 2009

This is a nightmare, after solving the first problem I had, where the installation gets stuck in 'Copying windows files' (I had to disable the floppy disk from the BIOS, even not having floppy disk physically).

Now all the files are copied and extended properly, but when showing the screen saying that the system is going to reboot, the installation freeze. It never reboot.

Then I do a hardware reboot, Windows 7 loads ok, but in the screen that reads "Completing installation..." the process never ends.

I've seen (through shift+F10) that the log file 'setupapi.dev.log' reads something like it is looking for a driver for a pci.. but don't know what it means.

View 9 Replies View Related

Computer Hangs During Installation

Sep 2, 2012

I have a Toshiba L505-L5007 laptop and a while back the audio went out on it. After days of trying to find the problem to no avail, I was advised to try a complete factory restore because the person thought it was an OS issue. Well, now I try to restore it to factory settings but the OS hangs at the configuration screen on the 5th reboot. Is there something that I might have overlooked? I've tried scouring the internet for people with the same problems, but I can't seem to find anyone with the same problem. I've also tried upgrading the BIOS in case there was a problem there keeping Windows 7 from installing. Right now the laptop will come on, and only runs well in any of the safe modes, if I try to boot it normally it'll try to finish the installation and freeze.

View 3 Replies View Related

Installation Hangs On Black Screen

Nov 10, 2009

I thought I'd move with the times and picked up a copy of Windows 7 Ultimate. I had Vista installed before.

Booted from CD, delete/recreate partition and did a clean install.

The installer hangs on a black screen after the first reboot. Even left it overnight without progress. Forcing a reboot and going into Safe Mode the setup tries to continue, then comes up with a prompt saying 'Setup cannot run in Safe mode, rebooting your computer', whereupon it hangs again.

This is the sequence I tried:

1. Boot from CD, delete boot partition, new partition, clean install (HUNG)

2. Disconnect router, then as 1. (HANG)

3. Reset BIOS to factory defaults, then as 1. (HANG)

4. Disconnect external hard drive and printer, then as 1. (HANG)

5. Disabled on-board chips like sound, legacy USB etc, then as 1. (HANG)

I've tried booting to the CD and doing a 'repair windows' but that comes back without problems.

The only other thing I could think of is that the graphics card is incompatible... but I don't have onboard VGA and I don't have another card just lying around.

I've never had a problem doing a clean Windows install. I'm really disappointed they're making it so difficult. Does anyone have any suggestions? I might have to just go back to Vista...

View 9 Replies View Related

Install Hangs At Completing Installation

Feb 23, 2009

I attempted a windows 7 install on an x64 and x32 system several times with the same result. The Upgrade runs until the last stage and then hangs. I looked at the logs but didn't see any errors. All my systems are custom built using Vista ultimate OEM additions.I was successful installing the software as a new install.I updated all the drivers.

View 7 Replies View Related

When Shut Down Later, The Update Tries To Install And The Installation Hangs?

Mar 3, 2012

1) Download Cumulative Security Update for Internet Explorer 8 for Windows 7 (KB2647516)
2) PC crashes while making a restore point.3) Reboot - normal startup. But when I shut down later, the update tries to install and the installation hangs. After disc activity ceases, I shut down manually.4) Reboot - normal startup.At this point, I decided to use System Restore to clean out any residue from the failed install before downloading the patch again. Yup, you guessed it, I used the damaged restore point. D'oh!5) PC reboots as part of restore process - I get a startup error.6) Scan for problems - attempt repair - recieve the following error. "StartRep.exe Application Error. The instruction at 0x75bc9a45 referenced memory at 0x538e0e85. The memory could not be read"7) I try to restore to an earlier point, but the restore fails."System Restore failed while mounting the registry from the restore point. Unspecified error (0x80070020)"8) I close System Restore window and PC reboots automatically - normal startup.9) I recieve a notification from "Solve PC Issues" in the taskbar saying Microsoft Security Essentials is out of date and would I like to update?

So here I am. My PC appears to be running smoothly, but I don't know if there's any hidden damage in the system. I still want to clear out any residue from the failed install before I download the patch again, but now I'm wary of using System Restore. Also, the MSE update notification has me puzzled - the last restore point I tried to restore to preceeded an MSE definitions update, but that restore failed (didn't it?) and anyway, I don't normally recieve definitions update notifications from "Solve PC Issues". This las left me unsure where my system is at restore point-wise right now.

View 2 Replies View Related

Cq61 Clean Install Hangs At Competing Installation

Dec 19, 2012

My daughters CQ61 required a clean install after repair. Windows 7 jus goes through the normal install process and hangs at completeing installation. I'm not a Noob but not a Geek either. I can only assume the drive is fine as it is running fine in the T400 IMB i am using now. Now here is the strange bit..... When i was just starting out i to had a CQ61 and it too needed a clean install and it did the same for months with friends in th know looking and trying to. In the end i send off for the factory software discs and tey went on straight away with win7 working fine. It was literally restored to new. I passed on said disks when i sold said CQ61 adising the guy never to go down the road i had. Now the software discs are no longer available from HP and There is none on torrents anywhere. I cannot accept that this is the only way to install clean install. If it was that critical to have the discs they would send them out with the new machine. So thats muti attempts by multiple people on 2 identical machines presenting the same hang. One was solved with the Sowfwaredisks provided by HP and are no longer available. Should have copied them i know but never thought i would be looking down the same barrel of the same gun.

View 1 Replies View Related

System Hangs On Shut Down After Power Loss During Update Installation?

Sep 18, 2011

I had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.

View 1 Replies View Related

Windows 7 Installation Hangs At "Setup Is Starting..." Screen

Mar 22, 2011

I am helping out a friend by re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios.When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.

View 1 Replies View Related

Microsoft Has Released The Final Version Of Windows XP Mode

Oct 23, 2009

Microsoft has released the final version of Windows XP Mode. Windows XP Mode is a virtual Windows XP environment which can only be run under Windows 7 Professional, Ultimate or Enterprise editions, allowing older applications designed for XP to be used in Windows 7 without any compatibility issues.

View 9 Replies View Related

Windows 7 Hangs After It Has Completed Installation "Starting Windows"?

May 11, 2012

I just built a brand new computer but kept the same HDD. I realized that the motherboard and my HDD were not compatible because I kept receiving a freeze at the "starting windows" logo and a blue screen shortly thereafter. So, I re-installed windows onto the HDD but I keep getting stuck at the "starting windows" logo but this time it just stays there. I've waited for 2+ hours at a time to see if time was the problem.A short list of all the things I've seen so far:1) Getting stuck at the "starting windows" screen AFTER windows completes its installation.2) At the time of the hang, all of my peripherals shut off.3) When I boot in safe mode, it gets stuck at /CLASSPNP for a minute or two, and then it says "setup preparing your computer for first use," but 5 seconds later I get a dialogue that says "Windows cannot complete installation in safe-mode."Things I've tried:1) Removing all RAM except for one stick.2) Using different DVD drives.3) Using different Windows 7 CD's.4)

View 7 Replies View Related

UPGRADE From The RC To The Final

Apr 24, 2009

I'm currently running Vista x64, and was considering upgrading to the Windows 7 RC.

The only thing that's stopping me is this: Will I be able to upgrade from the RC to a full version of Windows 7, or will I have to do a fresh install?

View 9 Replies View Related

"Completing Installation" After 1st Reboot Hangs

Nov 19, 2009

I would very much like to try out Windows 7, since all I read about it is very positive. I am trying to install the 64 bit version on my computer, but no matter what I do, it keeps freezing at "Completing installation" after the first reboot. For a minute or so the dots-animation is still working and I can move the mouse, but after that, it just completely freezes.

Some background information:

- I have a Asus P5K-E/WiFi mainboard with the latest BIOS installed (also tried an older BIOS);

- My processor (Intel Q6600) is overclocked to 3 GHz, but I have also tried the install at stock speed (2.4 GHz);

- The jMicron controller is disabled;

- SATA mode is AHCI. This is working fine with my Windows XP installation;

- My video card is a Radeon HD2600 card with 2 DVI outputs, both connected to a monitor. I also tried connecting just one monitor, without success;

- It doesn't matter whether I install from DVD or USB flash disk, the exact same thing happens;

- I have a USB soundcard (Digidesign MBox I), but disconnecting it during installation doesn't help;

- I use a Logitech USB mouse/keyboard set;

- I have two DSP cards installed in my PC, a UAD-2 and a SSL Duende, both working fine with XP.

I'm puzzled. Anyone have a clue?

View 2 Replies View Related

Firefox 12 Final On Major Geeks

Apr 21, 2012

I personally wait for it to be available via updates, or at least the Firefox page. They actually didn't release a version once as it had issues. But, if you must.

View 8 Replies View Related

RC1 Running Flawlessly, Can I Upgrade With Final Release ?

Jun 19, 2009

Windows 7 64bit build 7100 RC1 runs flawlessly on my PC. Will I be able to update to the final release, or will I have to do a clean installation?

View 4 Replies View Related

Upgrade To The Final Version Without Doing A Clean Install

Aug 15, 2009

hey, i want to get 7 set on my computer before school starts, so if i download and install the rc, will i be able to upgrade to the final version without doing a clean reinstall of 7?

View 7 Replies View Related

Install Upgrade, After Final Reboot, No Boot

Nov 26, 2009

I have vista on my first partition, 7rc on the third (second is vista data).

I had read about how you could upgrade from the release candidate and wanted to try it. Everything seemed to go fine, until the very final reboot. (Windows was upgraded to the new version). I saw my regular boot menu again, but then windows restarted the machine one last time, and when it came back up it just sat there, nothing happened forever. And Vista won't boot anymore either - I do not even get a boot menu. Just a blank screen with a flashing cursor, and nothing happening....

I tried the repair options, but windows can't find any of my system restore points (I did set a number of them!) neither vista nor 7. From a command prompt I did try to run bcdedit and it shows that my original boot menu should still be there, but the system is unable to find it. I am completely stumped. Can someone please indicate what to do to get my system to boot?

View 9 Replies View Related

Adobe Flash Player 10.3 Final Downloads Available

May 13, 2011

1. Media Measurement

2. Acoustic Echo Cancellation

3. Integration with browser privacy controls for managing local storage

4. Native Control Panel

5. Auto-Update notification for Mac OS Flash Player 10.3 Release Notes Direct Download Links Flash Player 10.3 Internet Explorer Flash Player 10.3 Other browsers Alternative Downloads (may not be so busy) Flash Player 10.3 Internet Explorer Flash Player 10.3 Other browsers Now you can control those pesky Flash settings via Windows Control Panel.

View 2 Replies View Related

Download Of Full And Final Version Of DirectX 11

Apr 4, 2012

How can I download direct x 11 for free

View 5 Replies View Related

Upgrade Never Completed ( 2 Hours Freezed On The Final Step)?

Mar 19, 2011

i was working on w7 ultimate x64 (i had xp 32 before, but due a hardware upgrade i wanted to try an x64 os) when an automatic upgrade from windows poped up(i was pretty sure i disabled the option before, but.. whatever). The thing is the upgrade never completed ( 2 hours freezed on the final step) and i had to reboot(i know, my mistake).from here, i tryed to boot but i did not sucess. the first issue apeared when i turned on the pc, and the boot recovery windows poped up, to check if there waserrors on the HDD. but wont never ever complete (6 or 7 hours running)i started to search on the web for a solution and i found a bunch of similar cases (a failed update and a failed boot recovery) but no clear solutions.never the less, the moest of the cases pointed at the same spot: "the bootmgr file" and i started to try a few steps posted on forums.first of all, i put the w7 dvd instalation and accesed to the console prompt.i followed these steps to delete and reinstall the bootmgr, or at least, that was what the post told me [CODE]well, i am about of exploding or jumping from a roof... seriously, i have some unfinished works to deliver in the begining of the week and i will not succes if ineed to blow up my D: and reinstall.

View 1 Replies View Related

Free Download Of Full And Final Version Of Direct X 11

Oct 6, 2012

i have a game that is asking for directx 8 or better each time i google i get everything but directx being downloaded

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved