I would very much like to try out Windows 7, since all I read about it is very positive. I am trying to install the 64 bit version on my computer, but no matter what I do, it keeps freezing at "Completing installation" after the first reboot. For a minute or so the dots-animation is still working and I can move the mouse, but after that, it just completely freezes.
Some background information:
- I have a Asus P5K-E/WiFi mainboard with the latest BIOS installed (also tried an older BIOS);
- My processor (Intel Q6600) is overclocked to 3 GHz, but I have also tried the install at stock speed (2.4 GHz);
- The jMicron controller is disabled;
- SATA mode is AHCI. This is working fine with my Windows XP installation;
- My video card is a Radeon HD2600 card with 2 DVI outputs, both connected to a monitor. I also tried connecting just one monitor, without success;
- It doesn't matter whether I install from DVD or USB flash disk, the exact same thing happens;
- I have a USB soundcard (Digidesign MBox I), but disconnecting it during installation doesn't help;
- I use a Logitech USB mouse/keyboard set;
- I have two DSP cards installed in my PC, a UAD-2 and a SSL Duende, both working fine with XP.
I tried loading windows 7 on my Dell Inspiron Mini, it says completing installation but after an hour it doesn't change, windows 7 hangs up on installation.
I attempted a windows 7 install on an x64 and x32 system several times with the same result. The Upgrade runs until the last stage and then hangs. I looked at the logs but didn't see any errors. All my systems are custom built using Vista ultimate OEM additions.I was successful installing the software as a new install.I updated all the drivers.
This is a nightmare, after solving the first problem I had, where the installation gets stuck in 'Copying windows files' (I had to disable the floppy disk from the BIOS, even not having floppy disk physically).
Now all the files are copied and extended properly, but when showing the screen saying that the system is going to reboot, the installation freeze. It never reboot.
Then I do a hardware reboot, Windows 7 loads ok, but in the screen that reads "Completing installation..." the process never ends.
I've seen (through shift+F10) that the log file 'setupapi.dev.log' reads something like it is looking for a driver for a pci.. but don't know what it means.
SUMMARY: Windows 7100 x64 installation freezes on splash/loading screen during the first restart after the last step of installation.
Let me start by saying this all started 4 days ago when Windows 7 Ultimate build 7068 x64 randomly started refusing to let my router assign my machine an IP address. It was a hard-line connection and had been working fine for weeks.
No hardware changes, no software changes, no network changes, and poof--no connectivity. Other machines and OS's connected to it fine, and my machine connected to OTHER networks fine. Two days of router hard resets and windows registry hacks yielded absolutely no progress, so I arrived at a reinstallation of Windows.
I decided that since I was going to lose all data anyhow, I would take that opportunity to update the firmware on my SSD--which, if you've never heard of this process-- it is no small feat. After consulting with 4 IT professionals at work, whoring out 3 different PC's, obtaining a mild concussion, and an act of congress, I finally got a formatted, blank SSD with updated firmware ready to re-install windows to.
I created a 7100 x64 installation disc using Microsoft's ISO and booted from it. Installation went smoothly all the way up to the very last step (when the screen resolution changes from default low-res to OS-worthy normal resolution) and then setup says it needs to restart one last time.
It appears as though this time when it restarts, it actually boots from the hard drive, rather than the installation program. I got the animated windows icon with the black back drop, and then before the OS pops up it just hangs and freezes.
No keyboard input is responsive (ctl + alt + delete doesn't work) once it freezes, and a "repair installation" just yields a "Windows cannot repair this installation" message. I tried everything I can think of and there is no way to get past it. Botting it in safe mode just says "Windows cannot boot in safe mode because setup needs to complete first."
For sanity's sake, I wiped the disc again and installed XP x64 and it installed lickedy-split just fine. I don't understand though, because I was running build 7068 no problems beforehand, and it wasn't hard to install at all.
I've been trying to install Windows 7 for like 3-4 times now and every time I get to the Completing Installation part I wait a little and suddenly I get a red error box and it says something about "Windows cannot be installed..." and then pc shuts down. The error box is there for like 0.5 seconds so I cant read it, but its just like 1 sentence. "Cannot be installed" and something after that.
I am at the last part and it seems to be froze, it says "completing installation" its doing nothing, the little "..." at the end of the text are still going but that's it, is this normal? I am installing through a USB.
Yesterday I bought a new hard drive. I went from a Western Digital Caviar Blue 500GB to a Western Digital Caviar Blue 1TB. So, same family of HDDs. I put in a burned Windows 7 install disc, and the process went okay until after the computer restarted and moved on to 'Completing Installation'. It just sits there. It doesn't freeze - I can move the mouse and there are three little dots after 'Completing Installation' that continue animating. I can also click the red X at the top-right but it says installation cannot be canceled at that point, which makes sense.I first let it sit on 'Completing Installation' for two hours. Then I turned my computer off, unplugged everything except for my mouse and keyboard, formatted the drive to get rid of any bad data, and tried again. After three hours of 'Completing Installation', I removed my video card, all but one stick of RAM, and entered the BIOS to see if there were any options relating to my hard drive. The only options I found were the options to choose a hard drive - I only have the one - and a couple of Plug and Play options. I restarted setup again, formatted again, and started the process over. Then I went to bed.
This morning, seven hours later, it was still sitting at 'Completing Installation'. I tried taking the install disc out to see if the install would stop or throw up an error, but it didn't make a peep. I took the install disc to my other computer to copy the data to a folder on the desktop, to see if there was an error. Everything copied fine. Plus, when I burned the DVD, I burned it at the lowest possible speed and had the program verify it. Everything came up fine.One thing I'll mention - when I start setup, I'm given an option to install a driver. I decided to choose that option just to see if it might provide any clarity. It then showed me the contents of my hard drive. Program Files was in there, My Documents was in there. So setup is doing something, it's just not finishing for some reason.
Windows 7 32&64bit wont pass first stage of Completing Installation due to "VGA DRIVER" After many weeks of trying to fix my mistake
[code]...
Well first off the computer was running Windows xp64 pro and I performed clean install of windows 7 64BIT, Everything was working great and installed all updates up to sp1. Then I got a "twitch" in my brain and deciced to update my bios which I have never done nor even really used bios before and even better I updated when I was using windows 7. I was nable to open safari and I think other things were glitching out but cant remember. So of ourse now I know that my bios settings changed with the update and I attempted to reset and oll back and now have the old bios reinstalled and have tried many different settings with no change in installation. So I thought maby another clean install will fix my mistakes.and now after many many attempts to install both 32 AND 64BIT Windows 7 I found that using Shift f10 and going to device manager I can see that only the VGA DRIVER has a question mark and there is not a display drivers folder. I have tried onboard with no card installed with same results. I have also tried 3 different video cards and even ownloaded the driver for them for windows 7 64 and 32 from microsoft update catalog and it will say it can not be installed at the load driver option during windows 7 install, it will find the driver and put it on the list so it knows what Im trying to install just wont install it.(like it doesn't recognize the hardware)So im going crazy because I know windows 7 will run on this maching I just dont know what to do to make it work again other then find a working vga driver or video card that will install its drivers during the install from the windows 7 disc.I have tried:2 different hd both formated with windows 7 disc from cmd prompt disabled everything in bios I am not needing for installinstalling from usb with nothing attached to motherboard except a video card because I dont think onboard is compatable.Have tried to install in safe mode tried to disable vga during completing installation tried disabling usb after first restart and removed usb.I have tried installing in a different computer then puting hd back in and repair says it can not repair.Well im stuck believing I need to have a working VGA driver for installation to complete or it is not recognizing my card to know to install the driver.I have two VGA cards to try.Geforce 8500GT Geforce 7300LE Also my ethernet driver will not install ither so I dont have internet when using shift f10 to attempt installing driver over internet. I have been keeping it disables to prevent a problem there also.
I installed win 7 on my laptop. After completing the instalation, I started with update all drivers through device manager. When monitor software was finished with updating, monitor have had a black screen. There is no signs of life after many times of switching off the laptop on switch button.
I have tried to remove drivers in safe mode, but f8 or f10 on starting up does not run. Simply, screen is black, as it is no part of laptop.
Model of laptop is fujitsu siemens, model of monitor is samsung.
So I have searched around and none of the solutions worked, but let me get to the basics:
DFI LanPark DK 790 FX Motherboard 3.2 GHz AMD Athlon X2 64 bit processor 4 GB DDR2 RAM Nvidia GeForce 8800 GTS Video card with 720 MB Ram
Hard drives:
Western Digital Raptor @ 70 GB (going to be used as the OS drive) Western Digital Caviar @ 80 GB
Maxtor 120 GB IDE drive (the other 2 are both SATA drives)
Sony DVD R/RW Drive using onboard audio
Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.
i got a prob with my Windows 7 after the installation n the first reboot,and Starting Up Services, it comes on Completing Installation screen when it ends, it doesnt reboot, neither turn off, it just stays on black screen for hours. with the computer working, and the mouses`s cursor moving.
Cant remember excactly the PC specs 2,6Ghz Intel CPU Nvidia GeForce 7800 or smthng 512mb 4GB ram 2x120GB WD HDz
I seem to be having an issue doing a fresh install of Windows 7 x64 Enterprise on a 40GB Intel 320 series SSD. The install will go as far as 'Completing Installation' before the screen goes blank, the computer restarts, makes another attempt to complete installation, with the screen eventually going blank again (monitor indicator turns amber, system non-engaged)I've done an extensive amount of Googling, and have followed the installation guide found here on the sevenforums - SSD / HDD : Optimize for Windows Reinstallation (specifically, routine #4)[CODE]
I am stuck at the completing installation stage after reboot. Heres what I've tried:
Removing all but 1 stick of ram Only have the HDD im installing to plugged in Using the mobo vga with video card undone Have all USB devices unplugged ( except keyboard ) Disabling everything in "Other" in device manager Disabled display driver in device manager
I received this error in the event log: Cd rom has bad block under the administrative tab
ASUS Sabertooth Z77 Intel Sandy Bridge i5-2500k GSkill 8gig Ares series
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
my ASUS Eeepc 1015 netbook, running Windows 7 starter, hangs after i try to restart -- mainly after an update.
after acknowledging the restart, the screen would go dark and hang. i would have to hold down the power button to shut it off, then i would start it up manually.
as a side issue probably related to the netbook... often when the netbook goes into screensaver mode the mousepad doesn't respond when i want to get out of said screensaver mode. i have to hit a button in order for the netbook to "wake". once in a blue moon, even that doesn't work, and i have to reboot.
Windows 7 Professional x64 edition is installed on a computer. During the installation, every time it went to restart the system would hang immediately; I had to do a hard reboot to continue the installation.Now Windows 7 is installed, and still hangs on reboot. When I choose Restart, the system shows the shutdown screen, goes black, and hangs. After some time waiting it never reboots and I never see the BIOS screen. However, if I choose "shutdown", it works perfectly.Also, when I force it to reboot, the system does NOT give me the message that it wasn't shut down correctly. I've reinstalled the system twice. All drivers are installed correctly, and Windows is completely up to date. I even updated the BIOS to the current version.
I have Win XP installed on my PC and I have tried several times to do a dual boot with Windows 7 RC and after each attempt I have put my system back to normal by reformatting the Windows 7 partition with Acronis Disk doctor and reimaging XP Pro with Acronis true Image.
What happens is I go through the install and the green progress bar goes pretty well right across the screen and all the stages are checked of as they are done then I get the screen that the computer wants to reboot and I let it time out and when it starts up again I get "Press any key to boot from CD or DVD" the first time I left it because I didn't want to reinstall again after some time with the PC still at that screen I pressed a key and nothing happened.
Another time I pressed the key and it wanted to do another installation so I let it do a repair and when it rebooted the same thing so I tried again and removed the disk when it rebooted and when the PC gets through POST I get a black screen with a blinking cursor that I cant type anything to.
I would imagine that if I can get past this point it would be where I type in the product key.
I have tried this disk on another computer in Ubuntu with virtual box and it installed ok. I have the boot order correct I have recently installed XP pro on it. I am using a PS2 keyboard that was OK for the XP install and I can get into Bios OK.
After upgrading to Windows 7 everything worked fine for about 3 months. I had it set to sleep when I close the lid nnd it worked well. But suddenly it began getting pernickity. When I opened the lid, about 15 - 20 seconds later the computer totally froze and I had to reboot. Of course, when reloading I get the message that Windows shut down unexpectedly and a 'solution will be searched' but nothing every happened as far as that goes.I made a new profile but it did the same thing when working in that.At approximately the same time as this began, I lost my 'start menu' list, and although I can 'attach items to the list, upon reboot, they disappear.
Ok so yesterday I did a boot and nuke, completely wiped the hard drive because Vista had made it crash pretty bad earlier. Did plenty of check disk and memory tests beforehand and everything was fine.
Now, I am trying to install Windows 7 and I get to completing installation and it tells me it can't finish because an installation file is corrupted.
I have formatted the hard drive to no avail. Right now I am cleaning the disk through cmd prompt. The DVD is a valid copy, purchased from a military store, brand new.
I ordered a Windows 7 Home Premium Family pack about 2 months ago and it arrived last week. While I wasn't expecting it until October 22, I figured "why look a gift horse in the mouth". However, when I try to install it I hit a problem. I had Vista Ultimate installed and attempted an upgrade. Everything went fine until I got to the "Completing Installation" part. At this point the installation just stops. I've left it sitting here for over 8 hours with no results. I have tried doing a clean install, deleting and formatting the previous Windows drive, and always the same thing happens. There is no error message, it just stops. When I do a hard shutdown and reboot, I get the message that the computer experienced an unexpected shutdown and to reboot my computer. I get the same message when I reboot. I called MS who told me that support will not be available until 10/22.
The three dots beyond completing installation continue to move, but the progress bar hasn't moved all night. It's been twelve hours. Should I manually shut down and reattempt install?
I am re installing Windows 7 on a Dell Inspiron laptop. I used the disc that came with the system. Everything went smooth and restarted a couple of times but once it got to "Completing installation", it's been stuck on it for about an hour. I'm assuming that's not right because I've installed Windows 7 numerous times. The green status bar on the bottom isn't moving at all if that helps. What should I do?
This computer had Windows Vista installed and the hard drive crashed... So I bought a new Seagate 500g hard drive. I have tried installation of Windows 7 about a half dozen times; always with the same outcome.I noticed that the installation hangs while completing the installation after the display is switched to higher resolution.
Unplugging all USB devices that aren't needed. Updated Bios to the most recent version available and reset back to defaults. Double check that all essential hardware is compatible with 64 bit ( the documentation I've found says that all of my hardware is ok). Tried booting from DVD, burned at slowest speed. Tried booting from USB. Tried both 32 and 64 bit versions with the same results
why Windows hangs at the "completing installation" point?
I am helping out a friend by re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios.When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space
I have a Toshiba L505-L5007 laptop and a while back the audio went out on it. After days of trying to find the problem to no avail, I was advised to try a complete factory restore because the person thought it was an OS issue. Well, now I try to restore it to factory settings but the OS hangs at the configuration screen on the 5th reboot. Is there something that I might have overlooked? I've tried scouring the internet for people with the same problems, but I can't seem to find anyone with the same problem. I've also tried upgrading the BIOS in case there was a problem there keeping Windows 7 from installing. Right now the laptop will come on, and only runs well in any of the safe modes, if I try to boot it normally it'll try to finish the installation and freeze.
I thought I'd move with the times and picked up a copy of Windows 7 Ultimate. I had Vista installed before.
Booted from CD, delete/recreate partition and did a clean install.
The installer hangs on a black screen after the first reboot. Even left it overnight without progress. Forcing a reboot and going into Safe Mode the setup tries to continue, then comes up with a prompt saying 'Setup cannot run in Safe mode, rebooting your computer', whereupon it hangs again.
This is the sequence I tried:
1. Boot from CD, delete boot partition, new partition, clean install (HUNG)
2. Disconnect router, then as 1. (HANG)
3. Reset BIOS to factory defaults, then as 1. (HANG)
4. Disconnect external hard drive and printer, then as 1. (HANG)
5. Disabled on-board chips like sound, legacy USB etc, then as 1. (HANG)
I've tried booting to the CD and doing a 'repair windows' but that comes back without problems.
The only other thing I could think of is that the graphics card is incompatible... but I don't have onboard VGA and I don't have another card just lying around.
I've never had a problem doing a clean Windows install. I'm really disappointed they're making it so difficult. Does anyone have any suggestions? I might have to just go back to Vista...
I've been trying to install Windows 7 on a brand new computer. It's running RAID 0, and I'm using the latest drivers from my motherboard manufacturer.
Starting up the installation seems to work fine. It goes through the first phase of installation where I choose which partition I want to use, and it starts to copy files from the dvd, yada yada yada. After the "installing updates" section, a window pops up with the following message:
"Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation."
It then kicks me back to the start of installation. If I start the install again, it does the same thing. If I reboot and restart installation, also the same.
If I try a startup repair, I get a message saying that Startup Repair cannot repair this computer automatically.
I've tried this on two builds--7000 and 7077. Both have the same result.
1) Download Cumulative Security Update for Internet Explorer 8 for Windows 7 (KB2647516) 2) PC crashes while making a restore point.3) Reboot - normal startup. But when I shut down later, the update tries to install and the installation hangs. After disc activity ceases, I shut down manually.4) Reboot - normal startup.At this point, I decided to use System Restore to clean out any residue from the failed install before downloading the patch again. Yup, you guessed it, I used the damaged restore point. D'oh!5) PC reboots as part of restore process - I get a startup error.6) Scan for problems - attempt repair - recieve the following error. "StartRep.exe Application Error. The instruction at 0x75bc9a45 referenced memory at 0x538e0e85. The memory could not be read"7) I try to restore to an earlier point, but the restore fails."System Restore failed while mounting the registry from the restore point. Unspecified error (0x80070020)"8) I close System Restore window and PC reboots automatically - normal startup.9) I recieve a notification from "Solve PC Issues" in the taskbar saying Microsoft Security Essentials is out of date and would I like to update?
So here I am. My PC appears to be running smoothly, but I don't know if there's any hidden damage in the system. I still want to clear out any residue from the failed install before I download the patch again, but now I'm wary of using System Restore. Also, the MSE update notification has me puzzled - the last restore point I tried to restore to preceeded an MSE definitions update, but that restore failed (didn't it?) and anyway, I don't normally recieve definitions update notifications from "Solve PC Issues". This las left me unsure where my system is at restore point-wise right now.
