I've been trying to install Windows 7 on a brand new computer. It's running RAID 0, and I'm using the latest drivers from my motherboard manufacturer.
Starting up the installation seems to work fine. It goes through the first phase of installation where I choose which partition I want to use, and it starts to copy files from the dvd, yada yada yada. After the "installing updates" section, a window pops up with the following message:
"Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation."
It then kicks me back to the start of installation. If I start the install again, it does the same thing. If I reboot and restart installation, also the same.
If I try a startup repair, I get a message saying that Startup Repair cannot repair this computer automatically.
I've tried this on two builds--7000 and 7077. Both have the same result.
I have attempted to install Windows 7 a couple of times now (with different copies each time) and I keep getting the same problem:Everything goes very smoothly for the most part. It finishes the installation, and then goes to reboot. When it attempts to load up Windows 7 the first time, I get the black screen that asks what mode to start windows in (Safe Mode, Start Normally, etc) and I choose start normally. It then brings up the Win 7 startup screen, but pops up with an error that explains that the computer was rebooted unexpectedly and the install did not complete.From this point, all I can do is click the "ok" button (the only option given in the dialog box) which just restarts the computer. If I just let it go and don't touch anything, it brings me back to the exact same message. This happens infinitely. My only other option is to boot from CD again, which lets me start the install all over again. But this still just results in the same error. I ended up just re-installing XP so that I could try and find a fix for the issue.
I'm trying to install windows 7 on my laptop through a USB key, but so far I've been unsucessful. What's been happening is that everything goes fine until the installer needs to reboot itself, then the computer reboots, but installation process begins again from the beginning. No error messages or anything like that. I've begun the installation process 3 times now, each time the installer thinks it is installing a new copy.
For reference, I have an IBM Thinkpad T43, and I'm installing Windows 7 Professional.
This is a nightmare, after solving the first problem I had, where the installation gets stuck in 'Copying windows files' (I had to disable the floppy disk from the BIOS, even not having floppy disk physically).
Now all the files are copied and extended properly, but when showing the screen saying that the system is going to reboot, the installation freeze. It never reboot.
Then I do a hardware reboot, Windows 7 loads ok, but in the screen that reads "Completing installation..." the process never ends.
I've seen (through shift+F10) that the log file 'setupapi.dev.log' reads something like it is looking for a driver for a pci.. but don't know what it means.
I up graded my lifebook to Windows 7 and have been blown away, so much so that I decided I would kill two birds with one stone with my old Toshiba.
It is an M40 Satellite with a 56GB HD, 1,66mhz processor and 1GB Ram,
I managed to clear enough space to install windows 7 (I have been unable too as it was configure to run on a server I no longer have)
The installation went well, or at least it looked as though it did, since the install and the last reboot in the installation proccess it has been in a continuous boot cycle, it comes back with a 'windows error' recovery.
I have tried starting it in every mode available and I still have nothing. I have tried a reinstall with both XP and Windows 7 and setting the Bios to boot from the DVD Rom.
I have eve gone as far as to get DBAN Nukem to clear the HD and still it will not recognise anything from the DVD Rom.
Have anyaone had a similar experience and can anyone shed any light? I am getting close to tossing it in the trash!.
I formated all my particions of hdd, now i cant install Windows 7 or xp (by booting cd/dvd), because when system reboots it starts all over again. What should i do?
I have just built a system with the following specs and Windows is crashing after rebooting during the install process, I've tried installing without the RAID card installed into the PCI-e slot. The video card cannot be removed with the Core i5 CPU, it must be in there for this CPU from what I understand.I have not installed any drivers (i.e. for the RAID card, video card, etc). I'm using a USB mouse and USB keyboard. I've tried running windows without any USB ports in use and I still get the same result.!
i have a MSI A6000 Laptop. Ive been trying to fix this problem for 2 day with 12 hours time and read countless forums but still haven't been able to solve it.
I recently encountered windows 7x64 installation error, where i could not select disk partition to install. ( i formatted and deleted all of the partitions for a clean install). But somehow after running the memory diagnosis i was able to go through the installation. But during the installation on the second time it restarts, my computer gets a black screen when starting.
i cannot access the post screen menu or the recovery option( it is however possible to access the same thing via booting through the USB and selecting the recovery option instead of installing). Also the memory diagnosis tool does not work any more giving an error. The bios options are as follows:
MAIN : Serial ATA [Hard Disk] Serial ATA [ATAPI CDROM] Advanced: PCI Latency timer [64] Legacy USB support [enabled] AHCI Mode [endabled]
I am trying to install windows 7 on a Dell 3100 with 1.5gb ram 250 gb hd 2.20 ghz with an Nivdeo 8800 graphics card. I get pass the first installation but when i have to restart and it says"Updating Registry" And goes back to the Windows 7 installation screen the computer crashes and when it restarts and i try to get to boot up back windows 7 it reaches the screen that says"Starting Windows"Then restarts all over again,Any tips to fix this?P.S Safe mode don't works either and yes the Computer is windows 7 compatible.
I have problems entering windows after the first installation of Windows 7 64 bit built 7000.After seconds the welcome (splash) screen appears, the windows suddenly reboot automaticaly.After that, black screen appears with dashes blinking.(Actually, my current OS is Windows 7 32 bit built 7600, but I think it isn't cause of the problems. I have formatted the local drive, in which my current OS was installed, before I install Win 7 64 bit).
I can't install my Windows Ultimate 64 bit edition on my RAID 0 Western Digital 500GB hdd's because on the boot screen my computer keeps telling me to "Reboot and select proper boot device or insert boot media in selected boot device", I've done both those instructions, rebooted, reinserted, all of it, no solution. I made sure my boot priority is the drive first, and raid drives after. Still nothing. But this is the interesting part, last time I fixed this problem by using my previous computers dvd drive to install instead of the blu ray, it installed and everything was right with the world.
But I have since then thrown out the old DVD drive, and now have nothing to install with. So what I did in the past hour was used a freinds DVD drive to install and it did not work. When my System Config, is set to RAID, it calls both my blu ray and his dvd drive, ATAPI CD, when in IDE, it calls my blue ray a blue ray and his dvd drive a dvd drive. I simply want to do a clean(custom) install of my windows 64 bit on my two RAID 0 HDDs, I've checked the boot priority, I've put both hdds in RAID0 and I've also used someone elses dvd dive to try and install.
I'm trying to install Windows 7 Home Premium on an old underpowered Dell Dimension XPS T700r with a P3 chip running at 700 MHz, 768 Mb Ram, and an old ATI Rage Pro 128 display adapter. It runs XP Pro just fine.All seems to be going well as Setup copies and expands files until the first reboot, when I receive "Disk Read Error, press Ctrl-Alt-Del to restart". This occurs using several different hard drives of sufficient capacity. It also occurs when I try the installation from a flash drive after mounting the Windows 7 ISO on Virtual Clone Drive from within XP. I've tried to install Windows 7 Starter but it, too, chokes at precisely the same point. I've tried all this on an similar machine with comparable but different components. Same result with all these attempts.I know I'm try to push the envelope in a downward direction here; Windows 7 Upgrade Advisor issues the standard warnings on processor speed, ram, and display adapter, advising that any installation will be sluggish and that the graphics adapter will not support Aero.
I would very much like to try out Windows 7, since all I read about it is very positive. I am trying to install the 64 bit version on my computer, but no matter what I do, it keeps freezing at "Completing installation" after the first reboot. For a minute or so the dots-animation is still working and I can move the mouse, but after that, it just completely freezes.
Some background information:
- I have a Asus P5K-E/WiFi mainboard with the latest BIOS installed (also tried an older BIOS);
- My processor (Intel Q6600) is overclocked to 3 GHz, but I have also tried the install at stock speed (2.4 GHz);
- The jMicron controller is disabled;
- SATA mode is AHCI. This is working fine with my Windows XP installation;
- My video card is a Radeon HD2600 card with 2 DVI outputs, both connected to a monitor. I also tried connecting just one monitor, without success;
- It doesn't matter whether I install from DVD or USB flash disk, the exact same thing happens;
- I have a USB soundcard (Digidesign MBox I), but disconnecting it during installation doesn't help;
- I use a Logitech USB mouse/keyboard set;
- I have two DSP cards installed in my PC, a UAD-2 and a SSL Duende, both working fine with XP.
My computer hard drive crashed a week ago and most of my back-ups went with the system. So, I got a new 500 GB drive and have been re-installing everything from scratch. I started with a clean install of Windows XP (service pack 2), which took forever to get all the up-dates done. Then I upgraded to Windows 7 and did the up-dates for that. I didn't make a recovery disk at this point because I wanted to get everything installed first.Unfortunately, the last time I went to reboot it failed. When I power-up the computer it stalls out on the Dell BIOS screen. I can't get into Safe Mode, Setup, or the Boot Menu because my keyboard and mouses are not working. They are both USB and none of my USB ports are working. (Also, I have not PS/2 ports on my machine.).
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
The reason I ended up there was because I was getting a problem where, at random times during random programs, the computer would lose signal to the monitor... Pause for a while, then reboot. Figuring I might have old hardware profiles that needed updating, I went to check my windows updater and found it was disabled... A short series of checks and Gringo was head to head with a Zero Acess Infection, which he promptly kicked the backside of.However, since then, the black screen issue has returned. It seems it wasn't Malware related. It doesn't seem to have any obvious pattern. Sometimes it happens when nothing it happening at all, and when I get back to the computer there is just an error log.Sometimes it happens twice in a row, sometimes not for hours. CPU and GPU seem to be at normal tempsWhen windows reboots it has the following error log: Problem signature: Problem Event Name[CODE]
Does anyone know of a software available that lets you reboot from Windows and choose another OS besides the auto default, in a multiboot scenario?
I need something like this because I Dameware into my other computer a lot and would like to be able to get it to boot to another OS than default, remotely.
I guess I could use EasyBCD to change the default OS when I want to reboot but hoping to do this without editing bcd.
I followed the turorial and tried three or four times to make a VHD and it works but upon re-booting my PC the VHD I created is gone. I can get it back by re-attaching it but reboot and it's gone again. Oh my Bios is set up correctly in case any one asks.
I remember a functionality in Vista/XP where you could hold the SHIFT button for a warm reboot which effectively avoided having to go through BIOS POST.
I have tried this in Windows 7 however no luck.
Has this been removed? if so that suck cause i have a RAID controller which takes a long time to go through all of its tests/init.
I was running Windows XP and kept the system up for weeks on end. I just installed Windows 7 7600 last night and throughout the night the system will just restart. I saw some "power" labeled things in the event viewer mostly some wake on things with an "unknown" source but honestly it's not shedding much light on things. Is there anything I can do, change or install that will monitor why this happens?
I have been following the progress of Windows 7 through beta stages. I currently operate on Windows XP SP3 which runs great, however Ive very recently decided to go for WIndows 7 beta. I completely backed up all my information, booted from DVD, formatted and then started to install.
It copies/ expands all the files to 100%, then does a normal restart, It then comes up with starting windows> registering entries etc, the carries on finalising the install only to reboot itself?
After the reboot it gives me the windows recovery screen. If it tries to boot up it just goes into a reboot loop. I am sooo confused.
The thing is I would say I know my way around PC software and Hardware very well. I have tried different BIOS settings, Optimising defaults, Load-Fail Safe Defaults, Creating New Partitions etc.
All functions work fine, but when I reboot Windows 7, after the reboot the audio volume is set to max (100%); this does not happen when rebooting into Vista Ultimate x64 or XP Pro x32.
