Asus P9x79 Ssd Installation With New Installation Of Windows 7 Pro?
May 16, 2012
So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
i instaled windows 7 ultimate on my laptop, asus k53sj model,after a good installation when to enter in normal mode ,appears the starting log windows and then an image with asus log and then my laptop is restarting. Then this story is happen again and again no normal start of windows.i can'nt believe this..and i tried to go in repair mode and didn't worked or in safe mode its happen with same story with restarting.
My new asus p8z68-pro mobo runs everything just fine in the bios -- it detects all the relevant drives, my USB peripherals are working, etc. When I try to install Windows, however, I run into a problem. As soon as the installation files load off of the DVD and the installation begins my USB devices shut down. This means, of course, no keyboard or mouse to proceed with the install, so I'm stuck.I checked in the bios -- both the usb legacy support and the usb 3.0 legacy support are turned on. I have tried this with the EHCI hand-off both on and off. Either way, I run into the same problem. I've even swapped out my fancier mouse and keyboard for simpler models to see if it was some sort of driver issue, but nothing seems to make a difference.
Client of mine has bought his notebook ASUS U31S with external DVD drive yesterday and he asked me to install windows 7 ultimate (origin was windows 7 home edition) beside other operating system Linux and Solaris.
I divided the 500 GB hard disk but didn't touch the hidden partition that has recovery.
I formatted the C partition that had windows 7 home edition and install a fresh copy of windows 7 ultimate,,,the process was smooth , first restart asking about username and computer name , password,,,etc ,,,,but with the second restart, PC kept rebooting without completing the windows installation.
Although I have used the same widnows 7 CD for his other new laptop and the installation went smooth without any problem.
I tried different media same problem. This laptop does have an external DVD driv, of course it is an LG and brand new
I used to be able to install Windows 7 Betas just fine, but now when I went to go install the latest build 7057, it gets up to the Copying Files section, then jumps straight to 100%, then goes into Expanding Files, then comes up with an error about not being able to find the files!
I tried reverting to a previous beta that I knew worked, same problem.
I tried reformatting (through Ubuntu) and still can't get it to work!
Anyone else have this kind of a situation?
EDIT: I'm using a IDE -> USB Adaptor, tried two different DVD drives, same result.
I would LOVE to have Windows 7 on my Eee, but it just won't work!
I have a computer I built using an ASUS MB A8N-SLI Premium card. This card is a was purchased in 2007 and is one having two RAID chipsets. The first is a NVIDA and the second is a Silicon Image. The OS was XP Professional.
When I set up to install Windows 7 Professional Upgrade, I found that a) there were no ASUS drivers for Windows 7 and the "generic" Nvida and SII Raid drivers would not work with this ASUS card. So, says I, lets try and see if the VISTA drivers will be accepted by Windows 7... Nope.. Win 7 error says "can't find any drivers compatible with your hardware". OK.. So..
I have to buy a completely new motherboard.. I chose the Gigabyte MA790GPT-UD3H with AMD Phenom II Quad-Core 3ghz CPU. The M B is excellent with dual output video for two CRTs, and all the I/O I needed including IEEE1394 port for my FlexRadio.. But I get ahead of myself! So.. Let the buyer of Windows 7 be aware that he should check his MB and insure that Windows 7 drivers are available for his particular model. Otherwise, upgrading to Windows 7 can be more expensive than you planned!
Well this computer is brand new its supposed to have windows 7 its a Eee PC. A message pops up saying The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" to restart the computer, and then restart the installation.as far as I know new programs were not added and the installation was completed the first time. I already tried safe mode but it does not allow me.
P.S. its the mini so it has no cd rom to insert the cd and it did not come with a cd.
Some hardware will work with Microsoft drivers, but my AMD X2 5000+ processor doesn't register on CPU-Z at anything approaching 3.0 gb. even after altering settings in setup which when i ran xp 64 immediately resulted in processor speed change. what's up?
Updated to Win 7 2years ago (by a neighbor). Last week I tried to run the installationASUS CD and it came back with some kernel problem. I just wanted to reinstall some of the utilities, etc. that we're on the CD.
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
I had purchased Windows 7 upgrade about 2 years ago, downloaded and saved it as an ISO CD. I just had to format my hard drive and re-install. The installation completed but never asked for my Key Code. I checked Control Panel > System and found a temporary key code valid only for 15 days. When I changed the key code, I was advised of a "failure" because this Windows 7 was an "upgrade." Yes, I had upgraded from XP. Must I re-install XP and then install W-7 as an upgrade?
I have realized that Windows 7 could be installed without a DVD. I have tried to install Windows 7 on a hard drive but still the DVD drive didn't recognise.
I'm currently changing my Acer Revo R3610 from Linux to Windows 7. I'm downloading it from Microsoft as we speak. It's been a very long time since I ever loaded a new OS, i'm downloading the ISO files to load straight from a USB stick but there is part 1 and part 2 download. I have the tool for creating a bootable USB but do I down't understand how you can do that with 2 ISO files, surely part 1 (2.3gb) is the file to choose when creating this. What is part 2?Lastly do I just tell the BIOS to boot straight from the USB and let the installation do the rest or am I missing something?
I want to install Windows 7 Ultimate 64 bit on a 64GB SSD. The most articles about Windows 7 installation on the net focus on SSD itself, but I wonder what to do with the existing HDD, before and after installing W7 on SSD.Since there are several software and drivers already on the HDD, I don't want to format it, but obviously I don't need to leave the Windows OS on HDD once it is installed on SSD. I guess I shouldn't just erase the windows folder there, since there are registries and other information related to the whole system functionality. I have a retail version Windows 7 disk.
ows 64 bit, I currently have windows 7 32 Bit but looking to upgrade to 64 bit, I am aware that I cant install over my current 32 bit and was advised that I would need to do a clean install booting from the dvd, However this is where my query is, When booting from the dvd the grey loading bar loads up fine but then after loading im stuck on the windows blue screen with my mouse curser and that is all, the pc stops loading anything and just stops.
My question is surrounding installation of windows and how it works. I am a nerd and play quite a bit of games, I have(had) a 120g SSD that I had windows and the smaller stuff on. Then I have a 2tb hdd that I stored all of the large programs on so I could keep the ssd @ around 50% or lower capacity(was told this was important).Well my SSD seems to have failed, I trouble shooted it through bios and its not recognized even if I swap it with my 2tb hdd that is being recognized. So my question is can I install Windows on my 2tb HDD that already has files on it and be able to access the files just as I previously did when I had windows on my ssd?
I was attempting to install Mathcad 15 on my home computer running Win 7 home premium when I received the following message: "You are running Windows XP, but do not have Service Pack 2 (SP2) or higher installed. This is a minimum system requirement for Mathcad 15.0 M010. Please upgrade your system" I attempted to install XP SP2 but it would not install over Win 7.
something shut down my new laptop when i went to put on for some reason it needed to reinstall windows 7 home premium.... after loading windows files appears ....then it stops says please wait..... the screen goes black then reads setup is starting services a box appears andsays ........windows could not complete the installation............i push OK...it then says to install windows on this computer restart installation ............th;is happens over and over again....and nothing more........i have tried a restore,systems check,tried to open in safe mode,....
I have a PC with Windows 7 ultimate installed. I'm planning on purchasing a custom built Pc soon and was wondering whether i am able to transfer my current installation of Windows 7 ultimate to my new PC? I don't have the windows 7 installation disc butI would have expected Microsoft to have something that allows this but haven't found one. I've only found an application on Windows 7 called Windows easy transfer, but this only transfers files etc and not the actual Windows 7.
Just got a new HP laptop for Christmas (yeah. It's not even 7 on Christmas morning and I'm already having problems.) I've seen a lot of people with this problem, but I can't fix it the way they did. "Windows could not complete installation. To install Windows on this computer, restart the installation." Here's the catch:I can't start it in Safe Mode.I can't access task manager.F11 does nothing.I've tried alt+tab to see if these things are running in the background; they're not.I don't have any disks.It's an HP Pavilion dv7, and I got it refurbished.
i am windows certified but , i have not studied about how to install windows 7 in networkwith another pc not a serverplease would you give the steps for that kind of installation
I re-installed windows three days ago. Since then, it has completely frozen (requiring a hard reset) 4 times, twice in a row today, and twice in a row the day before yesterday.
My specs are as follows:
AMD Phenom II X6 1055T M4A89GTD-PRO 6GB A-Data DDR3 RAM ASUS EAH5770 CUcore Windows 7 Ultimate x64
I never had freezing issues before my new installation.
I've just installed Windows 7 on top of my old XP machine. For the first hour I had no problems connecting to the internet. I downloaded antivirus protection (AVG) and Comodo firewall and windows 7 began updating itself. The comodo firewall download stalled and I had to manually reboot the computer. It seemed to start fine in normal mode and windows finished updating itself. Since then however (i.e. after the reboot) I have not been able to access the internet with an 'error 651" message displaying. I removed both AVD and Comodo with no change in the situation. I also did a system restore to before the windows updates, still no luck.
I access the internet via a broadband modem connected to a router. I don't have the full details of the models with me now but can repost in about five hours with the details if needed. I've searched online and note that many have said I should replace the raspppoe.sys file.
Since this is a brand new instal, should I just re-install Windows 7?
he Bluescreens began after i installed Windows 7 64Bit Ultimate on my Computer, before that i had used Windows 7 32 bit Ultimate and i hadn't any problems. I installed the latest driver for all my components, but this didn't help. I also ran Memtest86+ with no ram errors. The Bluescreens appears often when I'm playing Starcraft 2 or Battlefield Bad Company 2.
Here are the my System Specs: Motherboard: Gigabyte GA-870A-UD3 Processor: AMD Phenom II X4 955 Graphic Card: AMD Readon HD 6870 Memory: Geil Value Plus DDR3 PC3 1066 1333MHZ 4GB Kit Power supply: Cougar SE 400
I have attached the minidump files, the RAMMon-SPD-Info, an the CPU-Z Memory InfosRAMMon - SPD Info.txt
First things first. Brand new discovery! Did you know that it's impossible not to backing-up and lose your old files during Windows 7 installation? That's right! Microsoft contradicting it-self in the first steps of installation preparation step by step information. At first they say that we should back-up our old files as they WILL BE deleted. Then they practically force an option of where our old Windows files will be backed up into Windows.old folder. So the folders such as "Users, Program Files, Windows ...etc" will be stored in Windows.old folder. And any other files created by you that are stored in "C:" directory will remain untouched! So don't worry about upgrading or backing up anything, since Windows 7 does it all for you! My advice, just go with a clean install and you'll be safer that way. Now back to business. Have you ever experienced a really bad day with such as Windows 7?Possible solutions for your headache have finally arrived:We need to try almost everything possible in our powers to locate and solve the problems, right?NOTE: I'm gonna do these steps backwards like if we don't really know how to solve this quick!
I got the error code 0x80070005 when trying to install Windows 7, the error displayed.Windows cannot install required files. Network problems may be preventing Windows from accessing the file. Make sure the computer is connected to the network and restart the installation. Error code: 0x80070005..I've got a 64 bit Vista running on an Asus G50V Laptop, and I'm trying to upgrade to the 64 bit Professional
I thought about upgrading some HW in my machine. i put everything in there, put a DVD with Win 7 inside, booted. It showed up that loading bar, after that the win starting animation, than the blue flowerish background poped up, than even the mouse showed up, but after that nothing happens. No installation window, only background with mouse cursor. I tried to wait 10 mins with no results. I even tried my RC beta DVD but it does exactly the same (well the background is slightly different :-) ). So now I am using my linux dvd to get access to the net to ask this. And linux works fine.
I have: INTEL Quad Core q9200 ASUS Extreme Maximus motherboard 2x2GB patriot kingston RAM Genius PCI 5.1 Audio
everything else was there before the upgrade, so it shouldnt have effect on the problem. (its some ASUS EAH 3650 video, LG DVD - I got it specifically for Win 7 beta, the previous one was making errors during installs , some SATA hard disk)
Removed parts: ASUS P5GDC PRO 2x 1GB RAM DDR1 INTEL Pentium IV 3Ghz
