USB Failure During Windows 7 Installation On ASUS P8z68-v Pro
Jan 5, 2012
My new asus p8z68-pro mobo runs everything just fine in the bios -- it detects all the relevant drives, my USB peripherals are working, etc. When I try to install Windows, however, I run into a problem. As soon as the installation files load off of the DVD and the installation begins my USB devices shut down. This means, of course, no keyboard or mouse to proceed with the install, so I'm stuck.I checked in the bios -- both the usb legacy support and the usb 3.0 legacy support are turned on. I have tried this with the EHCI hand-off both on and off. Either way, I run into the same problem. I've even swapped out my fancier mouse and keyboard for simpler models to see if it was some sort of driver issue, but nothing seems to make a difference.
View 2 Replies
ADVERTISEMENT
Dec 8, 2012
I have the above motherboard. I have been using a video card which is three years old and thought I would try out the integrated video before my video card died. I switched it in the Bios and switched the monitor cable and it started fine on integrated video. The only thing is that the first screen where I can enter Bios does not show, so I am unable to enter the Bios. I tried hitting the delete button on the blank screen but nothing happens. I was able to shut down the PC and switch back to the video card, so I am OK. Does anyone have any idea why the first screen doesn't show on integrated?
View 2 Replies
View Related
May 16, 2012
So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
View 2 Replies
View Related
Sep 22, 2009
I got the error code 0x80070005 when trying to install Windows 7, the error displayed.Windows cannot install required files. Network problems may be preventing Windows from accessing the file. Make sure the computer is connected to the network and restart the installation. Error code: 0x80070005..I've got a 64 bit Vista running on an Asus G50V Laptop, and I'm trying to upgrade to the 64 bit Professional
View 4 Replies
View Related
Feb 8, 2011
I have just had a new 1Tb hdd fitted by a shop after my original failed but since he fitted it it keeps crashing ior corrupting Is it possible to reload the Win 7 Home premium to a clean start as I can'tr get it to load
View 3 Replies
View Related
Nov 8, 2011
I have a strange problem. I bought a new computer:Motherboard: P8Z68-V LXProcessorL Intel(R) Core(TM) i7-2600K CPU 3.40 GhzNVIDIA GeForce GTX 56064-bit Operating System (Windows 7).Apacer SSD 59 GB.I wrote all the drivers but computer still working VERY slow. I tried to find aswer on the internet, but I didnt solved this problem and I don't know what to do.
View 2 Replies
View Related
Jan 19, 2012
I installed window 7 that time show massage reboot and select proper boot device and top media failure checked cable
View 2 Replies
View Related
Jan 19, 2013
I get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.
View 1 Replies
View Related
May 19, 2011
Specs:
Toshiba laptop
Win7 home premium 64-bit
3gb RAM
freshly formatted hard drive
original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
View 4 Replies
View Related
Jan 11, 2013
i instaled windows 7 ultimate on my laptop, asus k53sj model,after a good installation when to enter in normal mode ,appears the starting log windows and then an image with asus log and then my laptop is restarting. Then this story is happen again and again no normal start of windows.i can'nt believe this..and i tried to go in repair mode and didn't worked or in safe mode its happen with same story with restarting.
View 1 Replies
View Related
Nov 9, 2011
I recently received a virus that did a plethora of things and one of them was trying to delete system 32. To counter this I tried to reset my comp to a previous date. After pushing it to the farthest date and still dealing it I decided to reset to factory default without backing up any files. Everything goes great but when it starts installing the service and the OS it says the installation can not continue and the comp must be restarted. My comp is a HP TouchSmart 600 PC running Windows 7 Premium 64-bit. I have disconnected everything from it and tried running it on safe mode but I do not know how to restart it without pressing the power button but that just ends everything.
View 1 Replies
View Related
Jun 22, 2011
I have windows 7 ultimate x64 and I have been trying to install microsoft .NET Framework 4. However, every time I try, it always fails. It gets about halfway through the installation and a window pops up asking for me to open the location of an .msi that is not there. It's not in the setup fies and its not in the location that is given.Here is a screen cap of the installation and the window that pops up asking for the .msi file.
View 4 Replies
View Related
Jan 27, 2012
Client of mine has bought his notebook ASUS U31S with external DVD drive yesterday and he asked me to install windows 7 ultimate (origin was windows 7 home edition) beside other operating system Linux and Solaris.
I divided the 500 GB hard disk but didn't touch the hidden partition that has recovery.
I formatted the C partition that had windows 7 home edition and install a fresh copy of windows 7 ultimate,,,the process was smooth , first restart asking about username and computer name , password,,,etc ,,,,but with the second restart, PC kept rebooting without completing the windows installation.
Although I have used the same widnows 7 CD for his other new laptop and the installation went smooth without any problem.
I tried different media same problem. This laptop does have an external DVD driv, of course it is an LG and brand new
View 2 Replies
View Related
Dec 3, 2011
This is my first build, and my mobo is an Asus P8Z68-V Pro and have a 64 bit Windows 7 Home Premium. I've been having a lot problems since day 1 of using it, but the most annoying of all of them is that I can't get any sound from my computer.Connected my iPod to my monitor (Asus VE247h) the speakers work fine.Tried changing the audio settings in BIOS... nothing Tried uninstalling and reinstalling the realtek driver 3 times...same problem?
View 31 Replies
View Related
Mar 26, 2012
When I plug it in, driver installation starts but fails. I can locate the device in the Device Manager, should I be manually installing a driver in this case? If so, I'd like to have a driver.
View 1 Replies
View Related
Oct 27, 2012
I get this error whenever I try to install Maya 2013 any ideas?
Code: 2012/10/27:01:39:30[private][private]=== Setup started on [private] by [private]===
2012/10/27:01:39:30[private][private]Launch
2012/10/27:01:39:30[private][private]CommandLine/url "http://studentsdownload.autodesk.com/SWDLDDLM/2013/MAYA/WI/Autodesk_Maya_2013_English_Japanese_SimplifiedChinese_Win_en-US_Setup1.exe" /SN 900-34219145 /PK 657E1 /student /skipEULA /akamai /auth /sid
[code]....
View 2 Replies
View Related
Sep 21, 2012
Can't install Windows 7 from original DVD , I formatted the HDD twice and still, same error. The installation stops after 10-15 min with this error code 0x80070017 I know the media is in great condition, so exclude this problem. Maybe HDD failure ? I did the format and wipe via usb with MiniTool partition wizard .
View 4 Replies
View Related
Jun 15, 2012
Yesterday, I downloaded and installed the latest batch of system updates for Windows 7. When I restarted the computer, however, it stopped at 'Starting Windows' (without the animation), then brought up the startup repair program. As is usually the case, startup repair was unable to automatically identify and repair the problem, so I did it manually, opening the command prompt backing up then attempting to rebuild my BCD. However, the BCD rebuilder was unable to identify a windows filesystem on my hard drive. I tried bootrec /ScanOS, and that wasn't able to find it either. All the data on the hard drive is still present: I confirmed this with an Ubuntu live boot flash drive, so why can't bootrec find the system? After that, I tried /fixMBR and /fixBoot, and while both apparently succeeded, the computer still refuses to boot.
View 2 Replies
View Related
May 21, 2009
I am unable to get my Epson Stylus Photo R240 installed on Windows7 - has anyone got an answer to this please?
View 1 Replies
View Related
Mar 13, 2009
I have an Eee 1000HE.
I used to be able to install Windows 7 Betas just fine, but now when I went to go install the latest build 7057, it gets up to the Copying Files section, then jumps straight to 100%, then goes into Expanding Files, then comes up with an error about not being able to find the files!
I tried reverting to a previous beta that I knew worked, same problem.
I tried reformatting (through Ubuntu) and still can't get it to work!
Anyone else have this kind of a situation?
EDIT: I'm using a IDE -> USB Adaptor, tried two different DVD drives, same result.
I would LOVE to have Windows 7 on my Eee, but it just won't work!
View 1 Replies
View Related
Nov 28, 2009
I have a computer I built using an ASUS MB A8N-SLI Premium card. This card is a was purchased in 2007 and is one having two RAID chipsets. The first is a NVIDA and the second is a Silicon Image. The OS was XP Professional.
When I set up to install Windows 7 Professional Upgrade, I found that a) there were no ASUS drivers for Windows 7 and the "generic" Nvida and SII Raid drivers would not work with this ASUS card. So, says I, lets try and see if the VISTA drivers will be accepted by Windows 7... Nope.. Win 7 error says "can't find any drivers compatible with your hardware". OK.. So..
I have to buy a completely new motherboard.. I chose the Gigabyte MA790GPT-UD3H with AMD Phenom II Quad-Core 3ghz CPU. The M B is excellent with dual output video for two CRTs, and all the I/O I needed including IEEE1394 port for my FlexRadio.. But I get ahead of myself! So.. Let the buyer of Windows 7 be aware that he should check his MB and insure that Windows 7 drivers are available for his particular model. Otherwise, upgrading to Windows 7 can be more expensive than you planned!
View 2 Replies
View Related
Jan 30, 2011
Well this computer is brand new its supposed to have windows 7 its a Eee PC. A message pops up saying The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" to restart the computer, and then restart the installation.as far as I know new programs were not added and the installation was completed the first time. I already tried safe mode but it does not allow me.
P.S. its the mini so it has no cd rom to insert the cd and it did not come with a cd.
View 2 Replies
View Related
Oct 30, 2009
Some hardware will work with Microsoft drivers, but my AMD X2 5000+ processor doesn't register on CPU-Z at anything approaching 3.0 gb. even after altering settings in setup which when i ran xp 64 immediately resulted in processor speed change. what's up?
View 2 Replies
View Related
Jan 27, 2013
Updated to Win 7 2years ago (by a neighbor). Last week I tried to run the installationASUS CD and it came back with some kernel problem. I just wanted to reinstall some of the utilities, etc. that we're on the CD.
View 2 Replies
View Related
Apr 18, 2011
can i download free audio driver for my pc
View 2 Replies
View Related
Feb 14, 2012
i'm trying to install at bios and easy tune 6, but for some reason it comes up saying open driver failure, or open driver handle failure. what do i do?
View 2 Replies
View Related
Mar 9, 2012
"Open device failure/ open driver handle failure" message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?
View 3 Replies
View Related
Nov 28, 2009
upgraded frpm asus P6T to asus P6T deluxe 2, do i need to reformat?
View 5 Replies
View Related
Dec 29, 2009
I don't want anything too crazy, just something I can take with me on my IT jobs...
I've narrowed it down to these two...
AMD - Asus X5 Laptop - Laptops at Ebuyer
and
Intel - Asus X5DIJ Laptop - Laptops at Ebuyer
The main differences from what I can see is. The Intel has the extra gig of RAM but the AMD has the better graphics chip.
I do not know how the CPU's compare.
I would be ever so grateful for some good advice.
View 9 Replies
View Related
Jun 2, 2011
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies
View Related
Jun 29, 2011
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies
View Related
