Windows 7 Boot Failure, Bootrec Unable To Locate Windows Installation
Jun 15, 2012
Yesterday, I downloaded and installed the latest batch of system updates for Windows 7. When I restarted the computer, however, it stopped at 'Starting Windows' (without the animation), then brought up the startup repair program. As is usually the case, startup repair was unable to automatically identify and repair the problem, so I did it manually, opening the command prompt backing up then attempting to rebuild my BCD. However, the BCD rebuilder was unable to identify a windows filesystem on my hard drive. I tried bootrec /ScanOS, and that wasn't able to find it either. All the data on the hard drive is still present: I confirmed this with an Ubuntu live boot flash drive, so why can't bootrec find the system? After that, I tried /fixMBR and /fixBoot, and while both apparently succeeded, the computer still refuses to boot.
View 2 Replies
ADVERTISEMENT
May 16, 2012
i did bootrec /rebuildbcd Still not able to boot the computer
View 2 Replies
View Related
Jan 19, 2013
I get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.
View 1 Replies
View Related
Mar 5, 2011
i have hp pavilian core to dou system with 2.2 Gh processor, 1 gb ram. it was running successfully with windows ultimate new but it was corrupted and i have lost the dvd of ultimate new. Now i am installing window7 ultimate it installs successfully but after installation when i boot my system from hard drive then it is unable to boot.a blank black screne appears with blinking cursor. but no message to display.
View 5 Replies
View Related
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Dec 29, 2011
I tried to install driver for samsung laser printer 331 and on desktop w/win 7 home premium. Message says cannot locate printer & in devices & printer its shown in unspecified. Checked printer by installing on laptop with xp worked fine.
View 9 Replies
View Related
Sep 22, 2009
I got the error code 0x80070005 when trying to install Windows 7, the error displayed.Windows cannot install required files. Network problems may be preventing Windows from accessing the file. Make sure the computer is connected to the network and restart the installation. Error code: 0x80070005..I've got a 64 bit Vista running on an Asus G50V Laptop, and I'm trying to upgrade to the 64 bit Professional
View 4 Replies
View Related
Feb 8, 2011
I have just had a new 1Tb hdd fitted by a shop after my original failed but since he fitted it it keeps crashing ior corrupting Is it possible to reload the Win 7 Home premium to a clean start as I can'tr get it to load
View 3 Replies
View Related
Nov 27, 2011
unable to locate bluetooth
View 1 Replies
View Related
Jan 27, 2012
I decided to install Windows7 Home Premium on my HP dc5000 SFF. it installed fine but every time it reboots, I get an error that says."FATAL ERROR: Failed to locate necessary table(s) to make adjustments. Press any key to continue booting"This only happens when using the "restart" mode. if I use "shut down" and let the computer turn completely off, it will start with no errors!I've never seen anything like this and not able to find anything on Google or other boards
View 1 Replies
View Related
Sep 8, 2009
I have two identical sata drives. They were previously configured at raid 0 so
reset and removed the raid config in my bios. I have a Asus p5wd2 Premium mobo.
When I try to install I get this error message
"Setup was unable to create a new system partition or locate existing system partition"
I also do not see my other sata drive detected In Win 7 set up.
I tried to load some drivers from disk and from usb but it says no signed drivers were found. I am also unsure what drivers I need.
View 2 Replies
View Related
Dec 18, 2012
I recently put together my first build and am currently trying to install Windows 7 onto it.
My school offers Windows OS for free so I downloaded a .iso file of Windows 7 Professional 64-bit onto a USB drive.it starts up just fine, leads me to install Windows, agree to terms, but when I go to set up the drive it gives me the message, "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."
View 19 Replies
View Related
Jan 5, 2012
My new asus p8z68-pro mobo runs everything just fine in the bios -- it detects all the relevant drives, my USB peripherals are working, etc. When I try to install Windows, however, I run into a problem. As soon as the installation files load off of the DVD and the installation begins my USB devices shut down. This means, of course, no keyboard or mouse to proceed with the install, so I'm stuck.I checked in the bios -- both the usb legacy support and the usb 3.0 legacy support are turned on. I have tried this with the EHCI hand-off both on and off. Either way, I run into the same problem. I've even swapped out my fancier mouse and keyboard for simpler models to see if it was some sort of driver issue, but nothing seems to make a difference.
View 2 Replies
View Related
Jan 19, 2012
I installed window 7 that time show massage reboot and select proper boot device and top media failure checked cable
View 2 Replies
View Related
Jun 28, 2012
Unable to locate printer software in the system
View 1 Replies
View Related
May 19, 2011
Specs:
Toshiba laptop
Win7 home premium 64-bit
3gb RAM
freshly formatted hard drive
original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
View 4 Replies
View Related
Jul 15, 2010
So I used to have vista, xp, and mac on my pc. After a while xp screwed up and left me with only vista and mac. My school handed out a bunch of software including windows 7. I saved the installer and key on my desktop and pretty much just left it there for two months. Eventually my vista crashed and could have only used mac. After a very short while my mac crashed to. I saved my key on a piece of paper but unfortunately I lost the installer.
This morning I found a iso, burnt it on another computer and popped it in. Everything was fine until I was asked where I want windows to be installed. Due to the fact that I tried to fix vista from dos, my hard drive configuration got messed up. Regardless of that I didn't care because everything was backed up on a external so I tried to format all of my hard drives and then instal windows. "Setup was unable to create a new system partition or locate an existing system partition." What am I supposed to do?
View 4 Replies
View Related
May 1, 2012
whenever I turn on the laptop, it seems to boot into Windows 7, in that the "Starting Windows" text appears and the little animation of colors forming the logo shows, but as some point it fails. This message appears on screen:autocheck not found - skipping AUTOCHECK After a few seconds a BSOD shows up, but too fast for me to make out what it says. It used to, but after some hasty fix attempts no longer does, cycle around to a menu that informed me of this error:Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. Here's the longer history:As some point in the past I decided to try out dual-booting Windows 7 and Linux on the laptop. I got it to a state where this worked fine. I had partitions roughly as follows:[Ubuntu][Windows 7]([Data and files][Boot]) The parentheses denote a logical partition. The Boot partition was very small and only held what was necessary to launch GRUB. This week, I realized that I hardly ever used the Linux partition and decided to get rid of it to reclaim storage space. This is where the trouble begins. I rebooted into a thumb drive that could run GParted and modified the hard drive layout in the following steps: Delete the Ubuntu partition Delete the Boot partition Grow the Data/Files partition to take up the space left by Boot Shrink the Windows 7 partition to make it faster to move Move the Windows 7 partition to the front of the volume Expand it to take up the remaining space. What I ended up with was: [Windows 7]([Data and files]) My naive and fatal mistake was to trust that the Windows Repair CD could fix any boot issues, and also that there would be no catastrophic hardware failures. Both of these assumptions turned out to be false.
First, the laptop's CD/DVD drive has either broken or is too unreliable to use. I have noticed it becoming more and more unstable over time, but now (when I need it most!) it simply does not seem to want to spin up and function at all. This forced me to create a Windows Repair USB drive. However, I can't load any installation media. This is because the laptop did not come with an install DVD. It had a recovery sector, which I cannibalized for the Linux partition. I did copy the stock recovery stuff to a series of DVDs, but, well...This is all to say that any solution that requires a DVD drive is straight out until I can replace it, which I'd like to consider a last resort.My expectations for the Windows Repair CD/USB have been dashed. Attempting to automatically fix boot issues either fails for some specific reason (I can probably reproduce it and provide the details, if necessary), with a dialog to send a report, or fails because it cannot detect any problems. I have tried a variety of things based on my own research to fix this through the command prompt: Running chkdsk /x /r on all drives. Does not find any errors. Running various bootrec commands: /fixmbr, /fixboot, /rebuildbcd, /scanos. All complete successfully, but the last 2 report finding 0 Windows installations. Using bcdboot and bootsect to recreate the bootloader. Again, no errors result, but it does not fix the issue. I guess it should have been obvious that none of the boot record fixes would matter, since the laptop does boot into Windows 7, briefly.
View 3 Replies
View Related
Jul 22, 2012
I am trying to run a Windows Defender burned cd on a computer that will not start windows 7. On the advanced boot options screen I do not see "Boot from a cd/dvd" as instructed by Defender.
View 2 Replies
View Related
Jul 20, 2011
making the computer recognise the system drive by using command prompt in recovery options windows 7 dvd. In the recovery options there is no operating system apparently but i know for a fact it is there as i had been on my windows 7 fine until i restarted the comp and then the problems started.
So how can i get windows to recognise where the system partition is.
View 3 Replies
View Related
May 28, 2012
my PC is refusing to start up. It happened yesterday after the power had flickered, I turned off my computer because the battery it was hooked up to was yelling at me (due to the power flicker). On the startup, my PC just hangs after "Verifying DMI Pool Data", and then gives me the "DISKBOOT FAILURE, PLEASE INSERT DISC AND PRESS ENTER" to continue shenanigans.
I've cleaned out my computer and have tried unplugging my two external hard-drives, as well as going into the BIOS and making sure the boot order was correct. When I insert a Windows boot disc, it refuses to 'repair' my system because it says there's no specified OS to repair... I thought the problem was that it wasn't recognizing my actual hard-drive, but that doesn't seem to be the case, (I forgot how I got to it but,) it recognized that I had 183/500 GB of space left (as well as being able to view certain files.
I recently was able to get into DOS, where it's listing my main drive as "X:windows\system32". Could this be the problem? If so, how did it reassign it to "X: and why did it do that?!
View 12 Replies
View Related
Jan 25, 2012
I turned the laptop off by holding the power on button depressed for as long as it took to power down.I have done this many times before.This time the laptop will not start windows after power up. Win 7 offers 2 options, normal or startup repair.Both appear to run but stay on permanently and neither will start windows. Tried booting using the repair disk and laptop will not boot from CD. CD spins initially but without booting. Only thing I can see that is not normal is that after several seconds trying to boot the Disk led remains permanently on, at least to my eyes.I have removed the battery, powered up without the battery,tried different repair CD all to no avail.
View 3 Replies
View Related
Oct 11, 2012
have an acer aspire one d257 netbook running windows 7 home starter. i had set boot password,hdd password and supervisor password from bios and as soon as i pressed F10 (save & exit) it showed that windows needs some start up repair. now the start up repair is going on and on and thre computer restarts finally it asked for sending problem to microsoft to which i clicked no.now the boot screen shows up and after that it shows windows is loading files and then it shows attempting system repair but the it restarts again and the whole process is repeated (it has happened for more than 5-6 times) .Is there a way i can do system restore (i neither have a dvd drive nor i have a windows dvd-the os came pre installed)
View 1 Replies
View Related
Oct 11, 2012
I have an acer aspire one d257 netbook running windows 7 home starter.i had set boot password,hdd password and supervisor password from bios and as soon as i pressed F10 (save & exit) it showed that windows needs some start up repair. now the start up repair is going on and on and thre computer restarts finally it asked for sending problem to microsoft to which i clicked no.now the boot screen shows up and after that it shows windows is loading files and then it shows attempting system repair but the it restarts again and the whole process is repeated (it has happened for more than 5-6 times) .Is there a way i can do system restore (i neither have a dvd drive nor i have a windows dvd-the os came pre installed) ?
View 1 Replies
View Related
Jun 17, 2012
my name is saiju, my system consisting of 160gb storage,3gb ram.......... 4 year old..windows 7 operating system... But the problem is, if i start my computer, it showing 2 choices, one is launch startup repair another is start windows normally,, i can't repaire it.. So many time format it, but same problem continuing.
View 1 Replies
View Related
Jan 12, 2013
I just bought new a 60gb SSD and Win 7 64 bit OEM (microsoft official) and when I try to boot the install disk with the SSD connected to the mobo I get a message at boot saying that it failed to boot from the CD and to insert the CD then try again. Needless to say when I reinsert the CD it still says this message.
When I connect my other new HD drive I bought (Western Gate 500GB) the CD boots up the Win 7 install and I can install the OS on that just fine, but that drive is intended to be my secondary and my SSD my primary for the OS.
I set it in my bios so that it boots from my DVD drive first and even disabled booting from the hard disk at all. My SSD shows up in the BIOS, but for whatever reason Win 7 install just WONT work when I have that SSD connected to the mobo.
The SSD is brand new, never been used before. I have no idea if I got a faulty SSD or I'm missing a step somewhere when installing a new OS onto a new SSD?
View 7 Replies
View Related
Jan 16, 2013
I am running Windows 7 32 Bit Home Premium, and at random times the PC will shut down and come up with the BSOD. After I try to boot up the computer I get a message saying 'Disk Boot Failure Insert system disk and press enter. Most of the time the only way I can get it to boot up is if I open up the case and disconnect the hard disk and dvd drive and reconnect them. On the initial screen after pressing the power button, it'll take a while before it detects IDE drives. If I don't disconnect/reconnect them, then at the initial screen it will sit at that screen and will not detect any disk/dvd drive.Does anybody know a proper solution without having to disconnect and reconnect the hard disk/dvd drive as I think that this may not be a good idea?
View 4 Replies
View Related
Sep 9, 2011
I was among the 1.4 million SDG&E customers that lost power on Sept 8, 2011. At around 10:30PM the power came back on and I attempted to boot up my Win 7 machine (which was on at the time of the outage). It gets through POST, displaying the list of auto detected devices, clears that screen to black and then displays a flashing white caret on the black background and gets stuck there.Any ideas on how to restore without re-installing Win 7 (and everything else)?
View 3 Replies
View Related
Feb 28, 2011
I've just tried twice to install Win7 Service Pack 1 on a relative's Acer desktop PC - which runs ZoneAlarm anti-virus, but has very little else apart from Word installed. Each time, the download and install process seemed to go OK; however, when the system rebooted, it displayed the Windows startup logo, but at the point where the logo goes away and you expect to see the mouse appear, it just froze with a blank grey screen. I left it for a while, but nothing happened. Eventually, I power-cycled the PC and an error message was displayed and a Windows boot selection was offered: Repair (recommended) or Start Normally.
Choosing 'Start Normally' repeated the boot and freeze sequence. Choosing 'Repair' started the startup repair procedure, which failed with 'The operating System is incompatible with Startup Repair'. Trying the 'Advanced Restore' procedure reported 'No restore points', although I had explicitly created one before the update, and the update itself creates one. I managed to fix it by running 'Startup Repair from the original Windows 7 installation DVD. The PC works fine now, but Service Pack 1 isn't installed. I have had to turn off automatic updates so that it won't get installed. Failing that, is there a way to disable the 'Service Pack 1' entry in 'Windows Updates' so that automatic updates can be enabled?
View 9 Replies
View Related
Jun 17, 2011
I notices some sound issues so I restarted. Then my computer froze seconds after windows had launched like on the web. After cleaning my fan and stuff it worked again I feel asleep watching something and awoke to a froZen black screen. I restarted and have been getting disk boot failure ever since.
View 9 Replies
View Related
Apr 7, 2012
I have a "DISK BOOT FAILURE" error during startup. I just installed Ultimate x64 and now this error appears. It was OK on Ultimate x86.
I detached all hard drives and USB devices except system disk and DVD ROM and still error appears. I booted from installation disk and ran repair and still error appears. I booted again from installation disk and ran next cmd:
bcdedit /export C:BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:ootcd bcd.old
bootrec /RebuildBcd
and still error appears.
The only way to run Windows 7 is to insert installation disk to DVD, wait until message "Press any key to run from cd or dvd", DO NOT press any key and wait. In a few seconds Windows 7 starts.
View 4 Replies
View Related