I get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.
View 1 Replies
Today I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?
View 2 Replies View Relatedwindows 7 disk boot failure insert system disk and press enter
View 1 Replies View RelatedI tried to add a new 1TB HDD into my computer. not realizing what i was doing wrong. i just threw it in there no software or anything. now my PC is getting "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" and i no longer have my windows 7 disk. is there anything i can do ?
View 1 Replies View Relatedim usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View RelatedI woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies View RelatedI've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies View RelatedMy friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies View RelatedWhen starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
View 3 Replies View RelatedI am running Windows 7 32 Bit Home Premium, and at random times the PC will shut down and come up with the BSOD. After I try to boot up the computer I get a message saying 'Disk Boot Failure Insert system disk and press enter. Most of the time the only way I can get it to boot up is if I open up the case and disconnect the hard disk and dvd drive and reconnect them. On the initial screen after pressing the power button, it'll take a while before it detects IDE drives. If I don't disconnect/reconnect them, then at the initial screen it will sit at that screen and will not detect any disk/dvd drive.Does anybody know a proper solution without having to disconnect and reconnect the hard disk/dvd drive as I think that this may not be a good idea?
View 4 Replies View RelatedI notices some sound issues so I restarted. Then my computer froze seconds after windows had launched like on the web. After cleaning my fan and stuff it worked again I feel asleep watching something and awoke to a froZen black screen. I restarted and have been getting disk boot failure ever since.
View 9 Replies View RelatedI have a "DISK BOOT FAILURE" error during startup. I just installed Ultimate x64 and now this error appears. It was OK on Ultimate x86.
I detached all hard drives and USB devices except system disk and DVD ROM and still error appears. I booted from installation disk and ran repair and still error appears. I booted again from installation disk and ran next cmd:
bcdedit /export C:BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:ootcd bcd.old
bootrec /RebuildBcd
and still error appears.
The only way to run Windows 7 is to insert installation disk to DVD, wait until message "Press any key to run from cd or dvd", DO NOT press any key and wait. In a few seconds Windows 7 starts.
I am running Windows 7 32 Bit Home Premium, and at random times the PC will shut down and come up with the BSOD. After I try to boot up the computer I get a message saying 'Disk Boot Failure Insert system disk and press enter. Most of the time the only way I can get it to boot up is if I open up the case and disconnect the hard disk and dvd drive and reconnect them. On the initial screen after pressing the power button, it'll take a while before it detects IDE drives. If I don't disconnect/reconnect them, then at the initial screen it will sit at that screen and will not detect any disk/dvd drive.I have 4gb of ram (3.21 usable) and 10 mins after booting up, my PC will be using 1.20gb of ram and I have only opened the web browser.
View 1 Replies View RelatedI seem to be having a problem with some disk boot failures. Two weeks ago, I opened up my computer and I got a disk boot failure. I manually closed the computer and opened it again afterwards, and the computer started up normally. Today, my computer opened up normally by itself. I left the computer alone for five minutes, but it restarted by itself and brought me back to the same screen that I saw two weeks which told me I had a disk boot failure. I manually closed my computer and opened it again, and the computer started up normally as well again.
View 26 Replies View RelatedRunning Win7 64 bit, built this computer back in December, has worked flawlessly until now. Last few days - operates fine for an hour or so, then freezes, goes black, crashes and reboots itself, only to stop at the loading OS screen due to 'Boot Disk Failure' Happens regardless of what I am doing, or even if idle. Have updated windows, ran virus and malware scans.
GIGABYTE GA-Z68XP-UD4 LGA 1155 (it was slightly bent on the end with the USB connectors and headphone jacks, but installed fine)
GIGABYTE GV-R697OC-2GD Radeon HD 6970
Antec EarthWatts Series EA-750 Green 750W
Intel Core i5-2500K Sandy Bridge 3.3GHz
64 GB SSD
8 gigs Ram
All Critical errors are event 41, Kernal Power - but I'm sure thats from me hardbooting on the disk failure.
Running Windows 7 Home Premium. For three days now I have seen nothing but the error Boot Disk Failure when trying to boot up.. I can overcome it by putting the IOS 7 disk in the DVD CD drive and let it boot so that I can then run the repair on the computer. I borrowed an OS 7 install disk and the same thing happens. After a series of checking the system I am informed that nothing wrong was found. If I leave the disk in the drive, even through rebooting, the machine runs just fine. If I take the disk out of the drive, I am dead in the water until I put it back in the drive, reboot and let the tests start over again and all is fine.
View 14 Replies View RelatedI started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
I have a modified HP Media Center Edition. My dad was on it and said that it crashed with a BSOD. When I rebooted it said Disk boot failure, insert system disk and press enter. I inserted the Windows 7 64 bit Ultimate installation disk that I had used to install this copy and the computer booted. Thee black screen with the windows logo showed before the computer did another BSOD. The message read:
"PAGE_FAULT_IN_NONPAGED-AREA". I booted the computer again and attempted to do a system repair but it said that the problem could not be repaired automatically. I was unable to do a system restore because it said no image was saved. I keep getting the BSOD every time I attempt to boot. I have not recently added any new hardware and there is nothing in the USB ports.
So starting last week, my computer started getting a blue screen. So yesterday it was so bad to the point where it wouldn't load windows at all. So I ran Ultimate Boot CD and it diagnosed the HDD was messed up. So I wiped it clean using Dban and now I'm trying to reinstall Windows 7 Professional but whenever I put the disc in and restart the rig I get a "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
Oh and if it helps, the rig is only like 6 months old. I did some reading and the only lead I have is to format the HDD and try again. I am also just realizing that I'm a dumbass and should have done system recovery, but too late now.
I want to do a 'custom' reinstall on my C: drive. It's clogged with unused programs and it runs very slow.I set the BOIS to boot from HD and CD; neither worked. I purchased a new HD and may want to install it as my C: drive.I set the BOIS to boot from CD; still I get the dreaded message:"Disk boot failure insert system disk and and press enter"I recently installed a new mother board due to the fact it was defective, not as an upgrade.To make it clear I already had Win7 Ultimate installed. On my first attempt to perform #1 I got to the question of which install did I want; I clicked 'custom'. From then on nothing happened, and now I keep getting "THE DREADED MESSAGE".I put my win7 disk in another OSXP computer and it displayed, "This disk is not compatible with this system" so I assumed my disc was not corrupt.I bought my win7 disk legally on line a couple of years ago, and I have used it once. Will that be the problem? I never got to the "License key" so I don't see how it could be?
View 4 Replies View RelatedYesterday, I downloaded and installed the latest batch of system updates for Windows 7. When I restarted the computer, however, it stopped at 'Starting Windows' (without the animation), then brought up the startup repair program. As is usually the case, startup repair was unable to automatically identify and repair the problem, so I did it manually, opening the command prompt backing up then attempting to rebuild my BCD. However, the BCD rebuilder was unable to identify a windows filesystem on my hard drive. I tried bootrec /ScanOS, and that wasn't able to find it either. All the data on the hard drive is still present: I confirmed this with an Ubuntu live boot flash drive, so why can't bootrec find the system? After that, I tried /fixMBR and /fixBoot, and while both apparently succeeded, the computer still refuses to boot.
View 2 Replies View RelatedA while back my computer crashed when playing ARMA2. I was playing and suddenly my screen turned black but the sound kept playing. I did a hard reboot and i got a Disk Boot failure. I decide to do another hard reboot and the computer turned on normally. After this i haven't had any problems any more.
Until yesterday when i installed a new game (Dishonored) A minute into the game the same thing happened as with the ARMA2 crash. Screen turns black but sound keep playing so i did a hard reboot. I got a Disk Boot failure but after a hard reboot it is gone again. But unlike with the ARMA2 crashes this happens every time i try to play dishonoured. I reinstalled the game on a different partition of the same drive and it stilled happened although this time it let me play for about 5min. But i don't think it had anything to do with reinstalling it on different partition it seems to randomly crash within 1-5 min.
I check a few other games and they don't seem to give any problems. I also did a chkdisk of the drive the game is installed on but no problems where found. I also did a memtest86 but also no errors.
My Windows is installed on a SSD but the game itself is installed on a HDD. don't know if that matters but i thought i just add that.
So is it the game or is it the drive ?
so i was trying to change my sound card, but the new sound card wasn't compatible with my computer. So i went ahead and put my old sound card back in, screwed everything back on. turned on my computer, and next thing i know it says, "disk boot failure, insert system disk and press enter". All i did was try to change the sound card. I don't think i unplugged anything else or moved anything around. I made sure everything was in securely too.
View 2 Replies View RelatedMy friend's Gateway laptop has problems and I want to install Windows again. But when I try to boot to the installation disk, after I select the DVD in the boot selection menu, I just get a blank screen with a flashing cursor. After a few minutes, one time I saw a message that said something like "bootmgr cannot be found" or is missing or something like that.
But the computer can successfully boot to a Puppy Linux boot disk.
My computer has been unable to boot to the Windows 7 installer for the past two days. My boot order is correct I have confirmed that the drive works (It runs a live CD of Ubuntu just fine). I have checked that the disk works (it boots fine in another machine). I have used this same disk on this computer before several times before with successful outcomes.
My diagnostics come back successful as well. I'm on a Dell Studio 1735 (from 2008). I'm really at a lost as to why it's not booting to the DVD. I'm currently typing this from my Ubuntu partition; I don't have convenient access to a Windows machine at this point.
Pretty much what happened is that my powersupply got messed up one day and just turned off my computer and I couldn't boot it back up. I ordered a new PSU and I installed it but now when I boot my computer I'm getting "Disk boot failure, insert system disk and press enter". I've tried putting in the installation disc and using the recovery options but my OS isn't listed/found and if I click load drivers I can clearly see both of my hard drives. I have already checked boot options as well. I was also using GRUB before this all happened as well because I installed ubuntu as a dualboot.
View 9 Replies View RelatedThis issue has just start a couple of days ago were the computer would restart at the point of the boot logo just before the orbs came in, i have tried booting in all safe modes and the computer would restart, tried repair and it restarts before finished loading. I have tried using the os install disk but it also restarts. There is no BSOD. Is there a way to fix this or would i have to replace my motherboard?
View 6 Replies View RelatedThe only way I could get rid of it was totally wiping my 2TB WDigital drive SATA. Now after I used KillDisk, I boot up the Installation disk and after the 'Starting Windows' screen, it goes to a black screen with a blinking cursor. Now, I know it's not the disk because I have a laptop that I was able to boot it up on and install perfectly fine. I know it's not the CD/DVD drive because I was able to boot other disks such as KillDisk with no problem. I'm not sure if there was still something I needed to do after wiping it with KillDisk to make the drive usable again. Also, I tried using another hard drive I had laying around which was a 320GB SATA. That one had some different problem booting up the Windows that was already installed on it. So.. again I used Killdisk and it does the same thing after wiping it.
View 9 Replies View RelatedSo i burned an .ISO Windows 7 ultimate ( 64 bit ) right now im running on ( 32 bit ) I can't install directly trought dekstop because i get this error "this installation disc isin't comaptible with your version of windows.." So i tried to boot with installation disc, after "setup is loading files" or something, i just get a windows 7 start up screen no letters or anything it just stays there. Only the cursor blue wheel thingy spins for few seconds. I tried different installation files.
View 7 Replies View RelatedNew laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies View RelatedDell laptop bought 8 months ago. My son said it started running real slow now windows won't load at all. Goes to start up repair I tried all the options and it didn't work:
Problem Error Name Startup Repair
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3: unknown
Problem Signature 4: 371
Problem Signature 5: Auto Failover
Problem Signature 6: 1
Problem Signature 7: failure during setup
OS version: 6.1.7601.2.1.0.2561
Local ID: 1033
After running setup repair it said Root cause found. Failure while setup is in progress.
