When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
View 3 Repliesim usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View Relatedwindows 7 disk boot failure insert system disk and press enter
View 1 Replies View RelatedI woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies View RelatedI've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies View RelatedMy friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies View RelatedI started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
I want to do a 'custom' reinstall on my C: drive. It's clogged with unused programs and it runs very slow.I set the BOIS to boot from HD and CD; neither worked. I purchased a new HD and may want to install it as my C: drive.I set the BOIS to boot from CD; still I get the dreaded message:"Disk boot failure insert system disk and and press enter"I recently installed a new mother board due to the fact it was defective, not as an upgrade.To make it clear I already had Win7 Ultimate installed. On my first attempt to perform #1 I got to the question of which install did I want; I clicked 'custom'. From then on nothing happened, and now I keep getting "THE DREADED MESSAGE".I put my win7 disk in another OSXP computer and it displayed, "This disk is not compatible with this system" so I assumed my disc was not corrupt.I bought my win7 disk legally on line a couple of years ago, and I have used it once. Will that be the problem? I never got to the "License key" so I don't see how it could be?
View 4 Replies View RelatedPretty much what happened is that my powersupply got messed up one day and just turned off my computer and I couldn't boot it back up. I ordered a new PSU and I installed it but now when I boot my computer I'm getting "Disk boot failure, insert system disk and press enter". I've tried putting in the installation disc and using the recovery options but my OS isn't listed/found and if I click load drivers I can clearly see both of my hard drives. I have already checked boot options as well. I was also using GRUB before this all happened as well because I installed ubuntu as a dualboot.
View 9 Replies View RelatedI have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
Here are the drives I have on my computer:
-Windows 7 installed on a 1TB drive
-Windows XP on a 500gb drive
-2TB drive for storage.
-1TB drive for storage
-500GB drive for storage
Windows 7 was installed before XP, and I believe XP came after the physical installation of the 2TB drive. I always have to press F8, and then select the first hard drive in the list, and then I'd be able to select to boot "Windows 7." Otherwise it'd give me "boot disk boot error, please insert system disk." The drive I'm selecting is my 2TB drive. My computer won't boot if the 2TB isn't plugged in. I've tried Option One and Two from here with no luck: [URL].
My system is a Hewlett Packard CQ 1040UK
AMD E350 1.60 GHZ
3.00 RAM
64 bit OS.
It is six weeks from new. When I load a dvd rom into the drive bay at the front of the computer the dvd is taken into the machine. When I try to play the disc I get the message 'insert disc'.Watching DVDs worked perfectly until a few days ago.
I tried to add a new 1TB HDD into my computer. not realizing what i was doing wrong. i just threw it in there no software or anything. now my PC is getting "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" and i no longer have my windows 7 disk. is there anything i can do ?
View 1 Replies View Relatedno bootable devine for acer win7
View 1 Replies View RelatedFor about the past 2 weeks my computer has been becoming slower and slower on startup, and just general usage. And so today I decided to take some actions to try to make it startup faster and just run faster in general. So i ran msconfig, disabled some startup entries and some non microsoft services. Also, knowing that disabling the boot GUI made the computer startup faster, I disabled that also. Then when I went to restart, I ran into problems.
When I turned the computer on I knew it wouldnt show the bootGUI and so I let it just sit and do its thing. After a very long 15 minutes (longer then it ever had been before) with just a black screen, I held the power button to turn it off. Then turned it back on, and got to the windows recovery window. So I hit f8, went into safe mode, loaded up msconfig, and enabled the bootgui, and restarted.
This time it showed the boot gui. However, once the windows logo was shown for about 15 seconds it switched to a screen that said "Windows is loading files" With a loading bar under it. I had never seen this before so I just let it load at first. As I was waiting for it to load I went and got dinner. Roughly 30 minutes later I went back and it was still stuck at not eve 1/4th of the way. So I held the power button again, restarted, went through the whole process again and then it brought up a message that said the communication with the device was gone. And that it happens when you pull a flash drive out or a hard drive or DVD drive looses power.
I do not think that my hard drive is going back. It is about 5 months old. Along with the rest of my computer. Pretty new. 5 months about.
System Specs:
Mainboard: MSI 970A-G54
Processor: AMD FX 8120 8 Core Processor
Ram: Patriot DDR3 8GB
Kingston DDR3 4GB
Graphics: 2x MSI N210's
the hard drive failed... i like to install an external hard drive. I have inserted the recovery CD...removed the failed hard drive yet the error stops to recover
View 1 Replies View Relatedi have a aspire one d255e , on start up it is asking me for boot disk ?
View 2 Replies View RelatedRunning Windows 7 Home Premium. For three days now I have seen nothing but the error Boot Disk Failure when trying to boot up.. I can overcome it by putting the IOS 7 disk in the DVD CD drive and let it boot so that I can then run the repair on the computer. I borrowed an OS 7 install disk and the same thing happens. After a series of checking the system I am informed that nothing wrong was found. If I leave the disk in the drive, even through rebooting, the machine runs just fine. If I take the disk out of the drive, I am dead in the water until I put it back in the drive, reboot and let the tests start over again and all is fine.
View 14 Replies View RelatedI am running Windows 7 32 Bit Home Premium, and at random times the PC will shut down and come up with the BSOD. After I try to boot up the computer I get a message saying 'Disk Boot Failure Insert system disk and press enter. Most of the time the only way I can get it to boot up is if I open up the case and disconnect the hard disk and dvd drive and reconnect them. On the initial screen after pressing the power button, it'll take a while before it detects IDE drives. If I don't disconnect/reconnect them, then at the initial screen it will sit at that screen and will not detect any disk/dvd drive.Does anybody know a proper solution without having to disconnect and reconnect the hard disk/dvd drive as I think that this may not be a good idea?
View 4 Replies View RelatedI have a modified HP Media Center Edition. My dad was on it and said that it crashed with a BSOD. When I rebooted it said Disk boot failure, insert system disk and press enter. I inserted the Windows 7 64 bit Ultimate installation disk that I had used to install this copy and the computer booted. Thee black screen with the windows logo showed before the computer did another BSOD. The message read:
"PAGE_FAULT_IN_NONPAGED-AREA". I booted the computer again and attempted to do a system repair but it said that the problem could not be repaired automatically. I was unable to do a system restore because it said no image was saved. I keep getting the BSOD every time I attempt to boot. I have not recently added any new hardware and there is nothing in the USB ports.
I notices some sound issues so I restarted. Then my computer froze seconds after windows had launched like on the web. After cleaning my fan and stuff it worked again I feel asleep watching something and awoke to a froZen black screen. I restarted and have been getting disk boot failure ever since.
View 9 Replies View RelatedI have a "DISK BOOT FAILURE" error during startup. I just installed Ultimate x64 and now this error appears. It was OK on Ultimate x86.
I detached all hard drives and USB devices except system disk and DVD ROM and still error appears. I booted from installation disk and ran repair and still error appears. I booted again from installation disk and ran next cmd:
bcdedit /export C:BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:ootcd bcd.old
bootrec /RebuildBcd
and still error appears.
The only way to run Windows 7 is to insert installation disk to DVD, wait until message "Press any key to run from cd or dvd", DO NOT press any key and wait. In a few seconds Windows 7 starts.
I am running Windows 7 32 Bit Home Premium, and at random times the PC will shut down and come up with the BSOD. After I try to boot up the computer I get a message saying 'Disk Boot Failure Insert system disk and press enter. Most of the time the only way I can get it to boot up is if I open up the case and disconnect the hard disk and dvd drive and reconnect them. On the initial screen after pressing the power button, it'll take a while before it detects IDE drives. If I don't disconnect/reconnect them, then at the initial screen it will sit at that screen and will not detect any disk/dvd drive.I have 4gb of ram (3.21 usable) and 10 mins after booting up, my PC will be using 1.20gb of ram and I have only opened the web browser.
View 1 Replies View RelatedSo starting last week, my computer started getting a blue screen. So yesterday it was so bad to the point where it wouldn't load windows at all. So I ran Ultimate Boot CD and it diagnosed the HDD was messed up. So I wiped it clean using Dban and now I'm trying to reinstall Windows 7 Professional but whenever I put the disc in and restart the rig I get a "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
Oh and if it helps, the rig is only like 6 months old. I did some reading and the only lead I have is to format the HDD and try again. I am also just realizing that I'm a dumbass and should have done system recovery, but too late now.
A while back my computer crashed when playing ARMA2. I was playing and suddenly my screen turned black but the sound kept playing. I did a hard reboot and i got a Disk Boot failure. I decide to do another hard reboot and the computer turned on normally. After this i haven't had any problems any more.
Until yesterday when i installed a new game (Dishonored) A minute into the game the same thing happened as with the ARMA2 crash. Screen turns black but sound keep playing so i did a hard reboot. I got a Disk Boot failure but after a hard reboot it is gone again. But unlike with the ARMA2 crashes this happens every time i try to play dishonoured. I reinstalled the game on a different partition of the same drive and it stilled happened although this time it let me play for about 5min. But i don't think it had anything to do with reinstalling it on different partition it seems to randomly crash within 1-5 min.
I check a few other games and they don't seem to give any problems. I also did a chkdisk of the drive the game is installed on but no problems where found. I also did a memtest86 but also no errors.
My Windows is installed on a SSD but the game itself is installed on a HDD. don't know if that matters but i thought i just add that.
So is it the game or is it the drive ?
I seem to be having a problem with some disk boot failures. Two weeks ago, I opened up my computer and I got a disk boot failure. I manually closed the computer and opened it again afterwards, and the computer started up normally. Today, my computer opened up normally by itself. I left the computer alone for five minutes, but it restarted by itself and brought me back to the same screen that I saw two weeks which told me I had a disk boot failure. I manually closed my computer and opened it again, and the computer started up normally as well again.
View 26 Replies View Relatedso i was trying to change my sound card, but the new sound card wasn't compatible with my computer. So i went ahead and put my old sound card back in, screwed everything back on. turned on my computer, and next thing i know it says, "disk boot failure, insert system disk and press enter". All i did was try to change the sound card. I don't think i unplugged anything else or moved anything around. I made sure everything was in securely too.
View 2 Replies View RelatedI get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.
View 1 Replies View RelatedI recently did a whole new build, new hard drive, mobo (GA-P35-DS3L/S3L) and processor. The problem is, I'm trying to install Windows 7 Ultimate and I come up with "Insert system disk and press enter" error when I try to boot from the disk. I checked the BIOS and the mobo had recognized the DVD drive and the hard drive. I tried putting the hard drive under slave and the DVD drive under master, and vice-versa. I am a high school student who generally gets lots of home work, so it would be nice to be able to type out my work.
View 2 Replies View RelatedRunning Win7 64 bit, built this computer back in December, has worked flawlessly until now. Last few days - operates fine for an hour or so, then freezes, goes black, crashes and reboots itself, only to stop at the loading OS screen due to 'Boot Disk Failure' Happens regardless of what I am doing, or even if idle. Have updated windows, ran virus and malware scans.
GIGABYTE GA-Z68XP-UD4 LGA 1155 (it was slightly bent on the end with the USB connectors and headphone jacks, but installed fine)
GIGABYTE GV-R697OC-2GD Radeon HD 6970
Antec EarthWatts Series EA-750 Green 750W
Intel Core i5-2500K Sandy Bridge 3.3GHz
64 GB SSD
8 gigs Ram
All Critical errors are event 41, Kernal Power - but I'm sure thats from me hardbooting on the disk failure.
I am trying to use a 64 GB usb stick. When I put the stick into a USB port, it shows up on my computer, but when I click it to open, it asks to insert a disk in the drive. How can I correct this?
View 1 Replies View Related