No Bootable Device Insert Boot Disk?
Nov 20, 2012the hard drive failed... i like to install an external hard drive. I have inserted the recovery CD...removed the failed hard drive yet the error stops to recover
View 1 Repliesthe hard drive failed... i like to install an external hard drive. I have inserted the recovery CD...removed the failed hard drive yet the error stops to recover
View 1 RepliesI have Windows 7 on a AMD Phenom Machine. Hard Drive died so I put another one in and restored Windows with Acronis True Image.
When I leave the Windows repair disk in the drive, the restored system starts perfectly, runs perfectly etc. But if I pull that repair disk out of the drive I get this error about "No Bootable Device" "Insert Disc". So in other words that repair disk has to be in the drive, else I get the error.
I have already:
1. Verified that the boot sequence points to my Windows Drive
2. Run system repair. That's useless. It just tells me everything is fine.
3. Run bootrec fixmbr, vixboot, rebuildbcd. No problems found
4. Run Chkdsk. No problems found.
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies View RelatedI am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
View 7 Replies View RelatedI recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083)
Copyright (C) 1997-200 Intel Corporation
This Product is covered by one or more of the following patents:
US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v120 (01/26/10)
PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
i am facing problem while booting before Reboot and select proper boot device or insert boot media in selected boot devic this screen is coming
View 1 Replies View RelatedWhen it crashes the cursor still moves and sometimes I can move windows around but then it all shuts down and sometimes briefly shows a blue screen of death. On reboot I sometimes get this message and have to reboot again. "Reboot and select proper boot device or insert boot media in selected boot device and press a key"It's a brand new box just built last week but no warranty and I would not even know what part to replace if it's hardware related.I've attached a Hijackthis to the post if it helps but I don't think it's virus related at all.
View 4 Replies View RelatedWhen left alone..."Reboot and select proper boot device or Insert boot media in selected boot device and press a key"I have a new(ish) cpu that I bought last Christmas, it works great and it has not crashed on me whenever I am using it. However, when I leave it on overnight (usually when it is downloading something big), when I wake up in the morning I am greeted with a black screen with the words:"Reboot and select proper boot device or Insert boot media in selected boot device and press a key"When this happens I simply press the power button a few seconds to turn it off, then turn it on again and it boots normally. (pressing a key only results in the message being repeated)What infuriates me is that it only ever happens when I leave it on overnight so I don't know when and how exactly it occurs but it almost always does. Like I said earler, it never does this when I am using it as it works fine otherwise. It just won't stay on overnight when I need it to.
System info:
Windows 7 ultimate x64 (full retail, installed once from scratch)
Intel core i7 4200k
Nvidia Gtx 560ti
16gb RAM
Seagate 500gb hdd for OS, 2Tb samsung and 1Tb seagate hdd for storage (all internal drives; no external drives attached)
Connected via hdmi to Pioneer receiver vsx 1121 then to 42" 720p Panasonic Plasma Tv
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies View Relatedim usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View Relatedwindows 7 disk boot failure insert system disk and press enter
View 1 Replies View RelatedI woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies View RelatedI've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies View RelatedI have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies View Relatedhow to disable please insert na disk into drive/device/hardisk/DR3 message
View 1 Replies View RelatedWhen starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
View 3 Replies View Relatedi left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
I'm busy installing a computer for a friend but we're stuck at an error.This are the computer specs to start with:
Asus P8P67-M Pro Rev 3
1 TB Samsung Spinpoint F3 HD103SJ
Intel Core i5 2500K
Corsair 8GB 1600 mhz
Scythe Mugen 2 rev B
GeForce GTX 570
Lian Li Lancool PC-K56
Corsair CX 600W
Optiarc AD-72605 DVD RW SATA
The BIOS boot priority is 1# Dvd Player and 2# Harddrive (so it detects both).It's also a SATA harddrive so I don't need to do anything with jumpers.Then when I insert the Windows 7 DVD it outputs the following error:reboot and select proper boot device or insert boot media in selected The PC is new and got build at a store so the only thing I need to do is install the software.
Just installed a new Seagate Barracuda 500 GB replacing an exact model that has failed."Reboot and select proper boot device or insert boot media in selected Boot device and press any key."When I plug the old C drive back in it boots, but the new one won't. What should I do?
View 1 Replies View RelatedMy laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I am using a Dell Inspiron N5010 with windows 7 OS.
My BIOS boot priority:
1st boot Hard Drive
2nd boot cd/dvd/cd-rw drive
3rd boot USB storage
4th boot Diskette drive
5th boot eSATA
6th boot Network
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
I just changed my PSU and upgraded my graphics card today. I tried booting it up and it came up with this message "reboot and select proper boot device or insert boot media in selected boot device and press a key."I'm pretty sure I got all the cables in correctly and I only have one harddrive. No externals.By the way, I don't have my windows 7 CD because I let a friend borrow it and I won't be able to get it back for some time. However, I do have a Windows XP CD if that helps in any way.
View 1 Replies View Relatedi dont have the proper boot device?
View 2 Replies View RelatedI just put together a PC from scratch and when i start my computer it says:
reboot and select proper boot device or insert boot media in selected boot device and press a key.I put in a copy of Windows 7 Home to boot, and it just continues to say that when i restart/press a key.
no bootable devine for acer win7
View 1 Replies View Relatedi cant gant get past this screen and therefore cant get into bios or ny other screenwhat do i do? tried to press several buttons at startup but it only keeps multiplying the message on screen.
View 3 Replies View RelatedHere are the drives I have on my computer:
-Windows 7 installed on a 1TB drive
-Windows XP on a 500gb drive
-2TB drive for storage.
-1TB drive for storage
-500GB drive for storage
Windows 7 was installed before XP, and I believe XP came after the physical installation of the 2TB drive. I always have to press F8, and then select the first hard drive in the list, and then I'd be able to select to boot "Windows 7." Otherwise it'd give me "boot disk boot error, please insert system disk." The drive I'm selecting is my 2TB drive. My computer won't boot if the 2TB isn't plugged in. I've tried Option One and Two from here with no luck: [URL].
i have a aspire one d255e , on start up it is asking me for boot disk ?
View 2 Replies View RelatedI started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
My asus Eee pc 1005HAB is not properly working, whenever I open it there's a reboot and select proper boot device or insert boot media in selected boot device and press a key...message.
View 1 Replies View Related