My asus Eee pc 1005HAB is not properly working, whenever I open it there's a reboot and select proper boot device or insert boot media in selected boot device and press a key...message.
View 1 Replieswhen I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies View Relatedi left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
I'm busy installing a computer for a friend but we're stuck at an error.This are the computer specs to start with:
Asus P8P67-M Pro Rev 3
1 TB Samsung Spinpoint F3 HD103SJ
Intel Core i5 2500K
Corsair 8GB 1600 mhz
Scythe Mugen 2 rev B
GeForce GTX 570
Lian Li Lancool PC-K56
Corsair CX 600W
Optiarc AD-72605 DVD RW SATA
The BIOS boot priority is 1# Dvd Player and 2# Harddrive (so it detects both).It's also a SATA harddrive so I don't need to do anything with jumpers.Then when I insert the Windows 7 DVD it outputs the following error:reboot and select proper boot device or insert boot media in selected The PC is new and got build at a store so the only thing I need to do is install the software.
Just installed a new Seagate Barracuda 500 GB replacing an exact model that has failed."Reboot and select proper boot device or insert boot media in selected Boot device and press any key."When I plug the old C drive back in it boots, but the new one won't. What should I do?
View 1 Replies View RelatedMy laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I am using a Dell Inspiron N5010 with windows 7 OS.
My BIOS boot priority:
1st boot Hard Drive
2nd boot cd/dvd/cd-rw drive
3rd boot USB storage
4th boot Diskette drive
5th boot eSATA
6th boot Network
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
I just changed my PSU and upgraded my graphics card today. I tried booting it up and it came up with this message "reboot and select proper boot device or insert boot media in selected boot device and press a key."I'm pretty sure I got all the cables in correctly and I only have one harddrive. No externals.By the way, I don't have my windows 7 CD because I let a friend borrow it and I won't be able to get it back for some time. However, I do have a Windows XP CD if that helps in any way.
View 1 Replies View Relatedi dont have the proper boot device?
View 2 Replies View RelatedI am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
View 7 Replies View RelatedI recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083)
Copyright (C) 1997-200 Intel Corporation
This Product is covered by one or more of the following patents:
US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v120 (01/26/10)
PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
i am facing problem while booting before Reboot and select proper boot device or insert boot media in selected boot devic this screen is coming
View 1 Replies View Related[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies View RelatedWhen it crashes the cursor still moves and sometimes I can move windows around but then it all shuts down and sometimes briefly shows a blue screen of death. On reboot I sometimes get this message and have to reboot again. "Reboot and select proper boot device or insert boot media in selected boot device and press a key"It's a brand new box just built last week but no warranty and I would not even know what part to replace if it's hardware related.I've attached a Hijackthis to the post if it helps but I don't think it's virus related at all.
View 4 Replies View RelatedWhen left alone..."Reboot and select proper boot device or Insert boot media in selected boot device and press a key"I have a new(ish) cpu that I bought last Christmas, it works great and it has not crashed on me whenever I am using it. However, when I leave it on overnight (usually when it is downloading something big), when I wake up in the morning I am greeted with a black screen with the words:"Reboot and select proper boot device or Insert boot media in selected boot device and press a key"When this happens I simply press the power button a few seconds to turn it off, then turn it on again and it boots normally. (pressing a key only results in the message being repeated)What infuriates me is that it only ever happens when I leave it on overnight so I don't know when and how exactly it occurs but it almost always does. Like I said earler, it never does this when I am using it as it works fine otherwise. It just won't stay on overnight when I need it to.
System info:
Windows 7 ultimate x64 (full retail, installed once from scratch)
Intel core i7 4200k
Nvidia Gtx 560ti
16gb RAM
Seagate 500gb hdd for OS, 2Tb samsung and 1Tb seagate hdd for storage (all internal drives; no external drives attached)
Connected via hdmi to Pioneer receiver vsx 1121 then to 42" 720p Panasonic Plasma Tv
i cant gant get past this screen and therefore cant get into bios or ny other screenwhat do i do? tried to press several buttons at startup but it only keeps multiplying the message on screen.
View 3 Replies View Relatedlast night i turned off my computer all fine and working, then when i wake up and turn it on, it comes up with the Reboot and select proper boot device message, i cant access the computer to actually use it... and i dont think i have any windows 7 discs to repair it at all.....
View 7 Replies View RelatedI recently built a new rig and attempted to install Windows 7, yet when I attempted to install the software from the disk I received the message "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device". I have changed the boot order in bios (I have a Gigabyte Z77- D3H motherboard) but that has not helped, with it not booting from the drive with the disk in that I assigned.
View 3 Replies View RelatedI just put together a PC from scratch and when i start my computer it says:
reboot and select proper boot device or insert boot media in selected boot device and press a key.I put in a copy of Windows 7 Home to boot, and it just continues to say that when i restart/press a key.
I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
View 8 Replies View RelatedI received the error code "Reboot and select proper boot device or insert..."Also in another screen, which is one of the very few I can access, says there is a "master hard drive error." I have no CD's for Windows 7, I don't have a restore CD, I may be able to burn one from a neighbors computer, if I know the file and where to obtain it. I cannot bring up safe mode or any other screen other than when it attempts to turn on, it brings up the ACER sign, then I can press del: setup or F12:boot something.
View 1 Replies View RelatedMy computer started to freeze up a lot and now I receive the following error message on startup: "Reboot and Select proper Boot device. Insert Boot Media in selected Boot device and press any key."It is a Windows XP OS.
View 4 Replies View RelatedMy mom has a problem with her older desktop. It keeps coming up to reboot with proper boot device or insert media. I have gone into the BIOS and changed the boot sequence, but no matter what I do, that message always appears. There is not a cd in the drive. I have tried removing the cd-rom from boot-up completely, and it still goes back to that message. I know this is an older machine, but really I just want to get the info off it for her and I am unable to do that right now. Is this a hard drive issue, or a motherboard issue? I realize this message has been asked before, but the answers appear to be the same; to make sure the boot sequence is correct. I have already done that and its not working. PC runs windows 7 with all the updates.
View 1 Replies View RelatedIt boots fine from usb fine and starts the setup however when she goes to install it asks "insert the media device and select the driver windows 7". Ive looked around the forums and google and found that this can be a usb 2.0 , 3.0 problem with people just switching to the 2.0 slot and it working. However this does not work for her and so I looked around more and found it might be needing the drivers for the USB ports had her insert the disc that came with the motherboard however non of the setups in the usb folder work and im not sure which specific file she needs to choose to get the driver to install or 100 % if that is even the issue. Any ideas? Intel� Desktop Board DZ68DB - Overview this is the board Forgot to mention this hard drive is from her older computer so its a new motherboard / cpu / ram.
View 3 Replies View RelatedI'm trying to install Windows 7 to a rebuilt machine but it won't run from the SATA CD drive. Message is' Reboot and select proper boot device ' The CD drive is first boot priority and the HDD is blank. The CD drive appears in the BIOS boot list.
View 4 Replies View Relatedi was on the internet and it seemed windows crashed everything said not responding then wouldn't load. So felt that i had no other choice but to switch off the PC as it had stayed like this for a long time, when i came to reboot i got a message saying 'Reboot or select proper boot device' I am using an Acer Aspire X3450 PC and don't have the recovery disk but i do have an Acer Aspire laptop with the disk, when i put that in the PC it loads up giving me the option to Restore but it wont let me select it or highlight it. So downloaded a copy of windows 7 as a torrent and burned it to a disk in the hope i could re-install windows. This will allow to go into options like startup repair but wont repair anything as it will only seem to recognise the OS on the disk. So i removed the disk and all that happens is the same reboot error. I can't re-install windows as it will not allow me to.
PC Spec
OS: Windows 7 Home Premium 64 Bit
RAM: 6GB DDR3 Memory
CPU: AMD Athlon II X4 645 Quad-core Processor
HDD: 2TB Hard Drive
BIOS: P01-A2
i dont know is i should to post this issues here but i need help w/ booting my system build i connected my optical drive and my hdd and when power up everything look OK until goes to the monitor I see this black screen with that message I trying several things but not success how I get off of that screen so I can go to the BIOS interface and work from there I was able to see the BIOs before I installed this two drivers l don't understand.
View 2 Replies View Relatedi wasn't sure what section to put this problem in so decided on general. I have a asus x53e notebook that was on balanced on two corners to press in the charging cable ( not the problem ). It was knocked over and now when starting up i get the message on a black screen Reboot and select proper device. If i pressf2 when starting up i can get the bios screen but am unsure what happens after that.
View 9 Replies View RelatedShort version: Swapped HDDs, then got the error message in title on one of the drives. Tried mbrfix and bootsect via repair through Windows 7 CD, but doesn't help. Drive is still functioning.
Long version: I recently swapped some HDDs back and forth (one with Windows XP and another with Windows 7, but I did not try booting with both at the same time) and all of a sudden, I get the error message listed in the topic. The HDD is definitely still functioning, I can see it in BIOS and when booting with the Windows CD, I can use command prompt and browse the directories. I've tried mbrfix and bootsect. With bootsect, it says it is successful when entering the line "bootsect /nt60 all" and automatically finds the C:. However, when selecting repair through the Windows cd, the adrive does not show up and the operating system is listed as unknown local disk.
I've read through most of the threads with this same problem but either mbrfix or bootsect seems to usually fix it. I'd prefer not to have to copy the entire drive or reformat if possible, but I guess I will have to if I can't find any other solutions. Since bootsect was successful, does it mean the problem lies elsewhere and is not the MBR?
Reboot select proper boot device
View 1 Replies View Relatedi change the c/d rom in my computer and it refuse to restart.I tried to reboot but I keep receiving the same message. to reboot and select proper boot device.also what is proper boot device
View 2 Replies View Related