Reboot And Select Proper Boot Device Or Insert Boot Media In Selected?
Aug 11, 2011
I'm busy installing a computer for a friend but we're stuck at an error.This are the computer specs to start with:
Asus P8P67-M Pro Rev 3
1 TB Samsung Spinpoint F3 HD103SJ
Intel Core i5 2500K
Corsair 8GB 1600 mhz
Scythe Mugen 2 rev B
GeForce GTX 570
Lian Li Lancool PC-K56
Corsair CX 600W
Optiarc AD-72605 DVD RW SATA
The BIOS boot priority is 1# Dvd Player and 2# Harddrive (so it detects both).It's also a SATA harddrive so I don't need to do anything with jumpers.Then when I insert the Windows 7 DVD it outputs the following error:reboot and select proper boot device or insert boot media in selected The PC is new and got build at a store so the only thing I need to do is install the software.
View 11 Replies
ADVERTISEMENT
Jan 4, 2012
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies
View Related
Feb 2, 2012
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
View 1 Replies
View Related
Nov 20, 2011
Just installed a new Seagate Barracuda 500 GB replacing an exact model that has failed."Reboot and select proper boot device or insert boot media in selected Boot device and press any key."When I plug the old C drive back in it boots, but the new one won't. What should I do?
View 1 Replies
View Related
Jan 24, 2012
My laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I am using a Dell Inspiron N5010 with windows 7 OS.
My BIOS boot priority:
1st boot Hard Drive
2nd boot cd/dvd/cd-rw drive
3rd boot USB storage
4th boot Diskette drive
5th boot eSATA
6th boot Network
View 7 Replies
View Related
Feb 2, 2012
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
View 2 Replies
View Related
Apr 11, 2012
I just changed my PSU and upgraded my graphics card today. I tried booting it up and it came up with this message "reboot and select proper boot device or insert boot media in selected boot device and press a key."I'm pretty sure I got all the cables in correctly and I only have one harddrive. No externals.By the way, I don't have my windows 7 CD because I let a friend borrow it and I won't be able to get it back for some time. However, I do have a Windows XP CD if that helps in any way.
View 1 Replies
View Related
Jul 19, 2012
i dont have the proper boot device?
View 2 Replies
View Related
Mar 21, 2012
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies
View Related
Dec 1, 2012
I am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
View 7 Replies
View Related
Oct 25, 2011
I recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083)
Copyright (C) 1997-200 Intel Corporation
This Product is covered by one or more of the following patents:
US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v120 (01/26/10)
PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
View 2 Replies
View Related
Nov 24, 2011
i am facing problem while booting before Reboot and select proper boot device or insert boot media in selected boot devic this screen is coming
View 1 Replies
View Related
Sep 5, 2011
When it crashes the cursor still moves and sometimes I can move windows around but then it all shuts down and sometimes briefly shows a blue screen of death. On reboot I sometimes get this message and have to reboot again. "Reboot and select proper boot device or insert boot media in selected boot device and press a key"It's a brand new box just built last week but no warranty and I would not even know what part to replace if it's hardware related.I've attached a Hijackthis to the post if it helps but I don't think it's virus related at all.
View 4 Replies
View Related
May 13, 2012
When left alone..."Reboot and select proper boot device or Insert boot media in selected boot device and press a key"I have a new(ish) cpu that I bought last Christmas, it works great and it has not crashed on me whenever I am using it. However, when I leave it on overnight (usually when it is downloading something big), when I wake up in the morning I am greeted with a black screen with the words:"Reboot and select proper boot device or Insert boot media in selected boot device and press a key"When this happens I simply press the power button a few seconds to turn it off, then turn it on again and it boots normally. (pressing a key only results in the message being repeated)What infuriates me is that it only ever happens when I leave it on overnight so I don't know when and how exactly it occurs but it almost always does. Like I said earler, it never does this when I am using it as it works fine otherwise. It just won't stay on overnight when I need it to.
System info:
Windows 7 ultimate x64 (full retail, installed once from scratch)
Intel core i7 4200k
Nvidia Gtx 560ti
16gb RAM
Seagate 500gb hdd for OS, 2Tb samsung and 1Tb seagate hdd for storage (all internal drives; no external drives attached)
Connected via hdmi to Pioneer receiver vsx 1121 then to 42" 720p Panasonic Plasma Tv
View 4 Replies
View Related
Mar 28, 2012
I just put together a PC from scratch and when i start my computer it says:
reboot and select proper boot device or insert boot media in selected boot device and press a key.I put in a copy of Windows 7 Home to boot, and it just continues to say that when i restart/press a key.
View 1 Replies
View Related
Jul 24, 2012
i cant gant get past this screen and therefore cant get into bios or ny other screenwhat do i do? tried to press several buttons at startup but it only keeps multiplying the message on screen.
View 3 Replies
View Related
Jan 4, 2013
My asus Eee pc 1005HAB is not properly working, whenever I open it there's a reboot and select proper boot device or insert boot media in selected boot device and press a key...message.
View 1 Replies
View Related
Aug 8, 2012
I received the error code "Reboot and select proper boot device or insert..."Also in another screen, which is one of the very few I can access, says there is a "master hard drive error." I have no CD's for Windows 7, I don't have a restore CD, I may be able to burn one from a neighbors computer, if I know the file and where to obtain it. I cannot bring up safe mode or any other screen other than when it attempts to turn on, it brings up the ACER sign, then I can press del: setup or F12:boot something.
View 1 Replies
View Related
Jan 14, 2013
I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
View 8 Replies
View Related
Feb 16, 2013
I'm trying to install Windows 7 to a rebuilt machine but it won't run from the SATA CD drive. Message is' Reboot and select proper boot device ' The CD drive is first boot priority and the HDD is blank. The CD drive appears in the BIOS boot list.
View 4 Replies
View Related
Oct 20, 2012
i was on the internet and it seemed windows crashed everything said not responding then wouldn't load. So felt that i had no other choice but to switch off the PC as it had stayed like this for a long time, when i came to reboot i got a message saying 'Reboot or select proper boot device' I am using an Acer Aspire X3450 PC and don't have the recovery disk but i do have an Acer Aspire laptop with the disk, when i put that in the PC it loads up giving me the option to Restore but it wont let me select it or highlight it. So downloaded a copy of windows 7 as a torrent and burned it to a disk in the hope i could re-install windows. This will allow to go into options like startup repair but wont repair anything as it will only seem to recognise the OS on the disk. So i removed the disk and all that happens is the same reboot error. I can't re-install windows as it will not allow me to.
PC Spec
OS: Windows 7 Home Premium 64 Bit
RAM: 6GB DDR3 Memory
CPU: AMD Athlon II X4 645 Quad-core Processor
HDD: 2TB Hard Drive
BIOS: P01-A2
View 9 Replies
View Related
Jun 12, 2012
i dont know is i should to post this issues here but i need help w/ booting my system build i connected my optical drive and my hdd and when power up everything look OK until goes to the monitor I see this black screen with that message I trying several things but not success how I get off of that screen so I can go to the BIOS interface and work from there I was able to see the BIOs before I installed this two drivers l don't understand.
View 2 Replies
View Related
Jan 2, 2013
i wasn't sure what section to put this problem in so decided on general. I have a asus x53e notebook that was on balanced on two corners to press in the charging cable ( not the problem ). It was knocked over and now when starting up i get the message on a black screen Reboot and select proper device. If i pressf2 when starting up i can get the bios screen but am unsure what happens after that.
View 9 Replies
View Related
May 27, 2011
Short version: Swapped HDDs, then got the error message in title on one of the drives. Tried mbrfix and bootsect via repair through Windows 7 CD, but doesn't help. Drive is still functioning.
Long version: I recently swapped some HDDs back and forth (one with Windows XP and another with Windows 7, but I did not try booting with both at the same time) and all of a sudden, I get the error message listed in the topic. The HDD is definitely still functioning, I can see it in BIOS and when booting with the Windows CD, I can use command prompt and browse the directories. I've tried mbrfix and bootsect. With bootsect, it says it is successful when entering the line "bootsect /nt60 all" and automatically finds the C:. However, when selecting repair through the Windows cd, the adrive does not show up and the operating system is listed as unknown local disk.
I've read through most of the threads with this same problem but either mbrfix or bootsect seems to usually fix it. I'd prefer not to have to copy the entire drive or reformat if possible, but I guess I will have to if I can't find any other solutions. Since bootsect was successful, does it mean the problem lies elsewhere and is not the MBR?
View 2 Replies
View Related
Aug 26, 2011
Reboot select proper boot device
View 1 Replies
View Related
Nov 15, 2011
i change the c/d rom in my computer and it refuse to restart.I tried to reboot but I keep receiving the same message. to reboot and select proper boot device.also what is proper boot device
View 2 Replies
View Related
Jan 19, 2012
I am installing virtuac pc. and now i am getting like reboot and select proper boot device. so wht i have to do now?
View 2 Replies
View Related
Jul 21, 2012
When I try to start my computer I get a message "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key_". This problem started a few days ago after my computer crashed. I have had it up and running for 7 months now with no problems. I bought a drive that was not compatable* with my motherboard when I got the parts, but a friend let me borrow one to install windows 7. I just bought a drive to try and fix the problem and now I can't locate my windows 7 disc. I've checked all cables and unplugged everything that was in a usb slot. I've gone in bios and looked for boot order and the only thing that is trying to launch is my HDD. I'm beginning to think I'm just boned since I can't find my windows 7 disc.
View 2 Replies
View Related
Jul 31, 2012
My laptop reads reboot and select proper boot device or insert boot media in selected boot device and press a key.
View 2 Replies
View Related
Aug 1, 2012
I'm getting the message " Reboot and select proper boot device or insert boot media in selected boot device and press a key" upon starting up my computer. This happened randomly after I was torrenting something, I heard the torrent finish, fell asleep for an hour and when I woke up my computer was off. Don't know why. Turned on the computer and got this message. I've tried a few things based on the advice of others like clearing CMOS, tinkering with the BIOS and using Diskpart to make a specific partition "active" which is where I ran into some weird problems.
First off, it seems like according to my BIOS my computer recognizes both of my SATA hard drives and my DVD drive. The boot device priority was in the correct order and I tried tinkering with that to no avail. But it does show up. I've been running my computer and trying things out now with rather only the primary SATA HD hooked up or with the DVD drive as well (when trying to use the recovery disk).
The odd part though is when I tried using the recovery disk to access the command prompt and try out diskpart, I found out that I had no partitions? I was following steps to make it "active" and when I got to typing "list partition" after "selecting disk 0" I got a message saying the disk had no partitions which I found odd cos I was using the computer a few hours ago off of that very hard drive...
View 31 Replies
View Related
Aug 28, 2012
My computer randomly had a blue screen when I was using it. It restarted it by itself, and now every time I try to turn it on, it shows a black screen that says "Reboot and select proper boot device or insert boot media in selected boot device and press a key". I honestly don't know anything about computers.
Toshiba Satellite L775, Windows 7.
View 5 Replies
View Related
