i have hp pavilian core to dou system with 2.2 Gh processor, 1 gb ram. it was running successfully with windows ultimate new but it was corrupted and i have lost the dvd of ultimate new. Now i am installing window7 ultimate it installs successfully but after installation when i boot my system from hard drive then it is unable to boot.a blank black screne appears with blinking cursor. but no message to display.
View 5 RepliesYesterday, I downloaded and installed the latest batch of system updates for Windows 7. When I restarted the computer, however, it stopped at 'Starting Windows' (without the animation), then brought up the startup repair program. As is usually the case, startup repair was unable to automatically identify and repair the problem, so I did it manually, opening the command prompt backing up then attempting to rebuild my BCD. However, the BCD rebuilder was unable to identify a windows filesystem on my hard drive. I tried bootrec /ScanOS, and that wasn't able to find it either. All the data on the hard drive is still present: I confirmed this with an Ubuntu live boot flash drive, so why can't bootrec find the system? After that, I tried /fixMBR and /fixBoot, and while both apparently succeeded, the computer still refuses to boot.
View 2 Replies View RelatedI have a Gateway desktop that had Vista as the OS. I upgraded to Windows 7. Everything seemed to be going along well and then it rebooted and asked me to login. It won't accept my login. I've tried clicking ok with no entries still won't work. I rebooted and attempted to F8 to get in via safe mode and that screen flashes so quickly I can't hit enter on anything. This computer is 4 years old. I'm about ready to toss in the towel unless someone knows of a simple way to fix this issue.
View 4 Replies View Relatedmy computer has Windows XP 32-bit, and i'm trying to do a clean install to Windows 7 64-bit. this is my processor. i'm assuming it can take the 64-bit version. i boot from the disc, press any key, and all the files load and whatnot. i see a screen that says "starting windows", and the logo appears. i figure that's a good sign. but...after that, i get stuck on a screen with nothing but some "desktop wallpaper" and my mouse. it just sits there. i can move my mouse around, but no installation options pop up. i bought the upgrade version of Windows 7, and i'm under the impression that you should be able to do a clean install using those discs. i stuck the 32-bit disc in my drive, and the install menu showed up no problem. but i want to install the 64-bit version.
View 9 Replies View RelatedFrom my windows DVD, I've made an ISO image of it so I can copy it fully onto my USB(making it an ONLY install USB). The copying process took about 1-2 hours. I checked if the file were all there and it was. I then attempted to boot it from USB at the start of computer. I chose BOOT MENU > USB DEVICE, it takes about 1 minute then it says "Selected device is not available - press F11 to try again and F12 for setup" I think it was like this."The files were all there, with the autorun.inf and all codes are good but how come it won't boot?
View 9 Replies View RelatedI currently have 4 drives. I had Vista on my primary drive1, no OS secondary slave drive, Linux on my sata drive1, and Windows 7 64x on my sata drive2. I recently deleted Vista and installed windows 7 86x on my primary drive. Before installing Windows 7 86x the windows boot option gave me the choice to choose between the three OS and now it does not. The Windows 7 x64 drive is accessible and I'm able to view all folders but I can't get it to boot and that is where I have all my programs and work.
How can I get the boot manager to recognize my windows 7 64x drive which is not the primary drive?
well I'm having a bit of a problem. I got Windows 7 Pro 64bit installed on my computer but it won't boot up into it. It just sits at the screen "Loading Operating System." and does nothing.I'm at a loss at what I need to do. I can reinstall 7 if needed which will get me to the desktop but once I restart, it doesn't boot into it (ok I haven't tried a second time but I will in a sec).So does anyone have any idea on what I need to do?My motherboard Newegg.com - GIGABYTE GA-880GM-UD2H AM3 AMD 880G HDMI Micro ATX AMD MotherboardI have an old 80gb hdd as my main drive. Brand: Seagate
View 5 Replies View RelatedRecently i decided to stick some extra RAM in my old computer as 2GB didn't seem like enough. After removing the 2x 1gb sticks and putting in everything (2x 2gb and 2x 1gb) when i got to windows boot up screen it took a while to load, and then froze. I played around with the RAM, tried only one of the 2gb in all 4 DDR2 slots and it booted perfectly, i did the same with other 2gb stick and same result so it isnt the RAM, and neither does it seem its the slots. Did the same thing with the 1gb and fine. tried every permutations involving the 4 sticks but whenever i top 2gb windows freezes.I read around first and looked at similar problems people have had on this, and so i cleared the CMOS and updated the BIOS but still the same result (didn't do all permutations this time). Here is the specs for everything:
Mobo- P5N32 SLI SE DELUX http://uk.asus.com/Motherboards/In [...] SE_Deluxe/
RAM- Corsair 2GB 800 DDR2 and Corsair 1GB 667 DDR2
Relevant Info from CPU-Z:
Memory
[code].....
I have a Win7 ultimate 64bit I recieved from a friend. I assumed it was one of his Microsoft apps he gets in his MSDN subscription for free. Anyway, every now and then I would get these pop-ups from Microsoft saying its not genuine. He would give me a script to run that would fix it, until it would happen again.Bottom line I foud out later this was pirated software so I purchased a normal copy (win7 pro 64 bit) to do a reinstal of the software, BUTTTTT now I can't do it because I keep getting these errors saying "Windows was unable to create the required instalation folder 0x80070005". I know the last update for the pirated copy was something to remove "RemoveWAT.exe". I tried to do a restore in Win7 to a previous state but it errored "0x80070001"Any advice on what to do. I don't want to have to reformat the whole drive, because this was a dual boot on a new MAC so I could boot in iether MAC or Win7.
View 2 Replies View RelatedMy SONY VAIO VPCEB15FX laptop has been getting the S.M.A.R.T failures. I checked with SONY and since my laptop is more than 12 months old - could not get them to help me with this issue without paying (laptop started having issues exactly after 15 months- not so good for a branded laptop). So i thought i will try to handle this myself, created the recovery discs, repair disk and backed up all the data in 15 DVDs. I bought a WD Scorpio Blue hard drive (WD5000BPVT - Advanced Format Drive) and replaced the same in my laptop and started off with the recovery discs. I chose to restore complete system and it proceeded. Once it completed the process - the system restarted and the OS Setup began - now comes the issue. When the setup started it throws this error "Windows setup could not configure Windows to run on this computer's Hardware" I ordered the SONY recovery discs - repeated the above RESTORE process - but still facing the same error?
View 9 Replies View RelatedHave dual boot; XP and 7. 7 will no longer boot, asking for the installation CD. I don't have an installation CD, only the one that puts everything back as it was when purchased. Can I get a boot file that will boot from USB? Or since I can see the 7 drive from XP, could I add a file to Win7? I checked on EasyBCD that is supposed to work, but I' use RollBack and it won't work with RollBack installed. I'm afraid to uninstall RollBack since it has saved me so many times in the past.
View 3 Replies View RelatedMy friend's Gateway laptop has problems and I want to install Windows again. But when I try to boot to the installation disk, after I select the DVD in the boot selection menu, I just get a blank screen with a flashing cursor. After a few minutes, one time I saw a message that said something like "bootmgr cannot be found" or is missing or something like that.
But the computer can successfully boot to a Puppy Linux boot disk.
My mate had trouble with wayyyy too low fps in a game.W decided to install Windows 7 ultimate x64 on his laptop then.We couldn't upgrade vista to it, so we chose the "custom install" option, where Windows 7 gets installed separately and vista gets moved into a folder called windows.old.We were almost done with the install and had just passed the time and network setup, suddenly a small window flashes with the text "windows failed to complete...." we couldnt see the rest and the laptop rebooted.Then we got continually stuck on "press any key to boot from CD or DVD...".Sometimes we get it to continue and it gets stuck on "Windows is loading files". And 2 times it completed loading files and shut down instantly after.
View 6 Replies View RelatedAfter formatting and setting a new partition using the installation disk, I install Windows 7, all goes well. But as soon as the installation is finished and my laptop restarts, it wont boot from the HDD. I keep getting error messages saying:
Windows Boot Manager
Windows failed to start....
File: ootBCD
Status: 0xc000000e
[Code].....
A copy of the current boot configuration data will be saved as c:ootcd.backup.0001
However when i hit the "ok go ahead and fix it then!"-button i get another error saying Startup Repair cant save the new boot options. Anyone know if i can fix this problem with BCDedit or bootrec.exe
My computer has been unable to boot to the Windows 7 installer for the past two days. My boot order is correct I have confirmed that the drive works (It runs a live CD of Ubuntu just fine). I have checked that the disk works (it boots fine in another machine). I have used this same disk on this computer before several times before with successful outcomes.
My diagnostics come back successful as well. I'm on a Dell Studio 1735 (from 2008). I'm really at a lost as to why it's not booting to the DVD. I'm currently typing this from my Ubuntu partition; I don't have convenient access to a Windows machine at this point.
is there a way so that windows installation through dvd using boot can be prevented? as anybody who knows installation can install windows to remove password. and is there a way so that local users on a pc cannot use usb ports and other external devices?
View 7 Replies View RelatedHow to Do a Dual Boot Installation with Windows 7 and XP ?
View 0 Replies View Relatedi recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
i've had some issues installing sp1 (7 ultimate, latest windows updates) via windows update when the installation fails on a few different error codes, but i have gotten it to install a few times. each time the installation finishes, i restart the computer when prompted and it goes through the update process when shutting down, then after the windows 7 splash screen ("starting windows") passes, the screen goes blank (black screen, no video- monitor displays "going to sleep" message) and the HDD light on the computer is lit solid. i've left the computer sitting for hours with no change- i eventually get Windows to boot again by using the install disc to do a Windows restore, but i haven't been able to get past this yet.
View 6 Replies View RelatedIn process of creating a slipstreamed XP Install disk, but need to get the SATA drivers for this machine, as obviously there in no floppy to use. The factory disk has 2.5 GB of drivers, which obviously is more than I need, plus they will not fit on the CD.
View 3 Replies View RelatedAfter I installed Windows 7 64bit I found out that I had no sound so I went and download the latest driver for my Creative Labs X-fi Xtream gamer audio card. After I installed it and then restarted the regular "starting windows" came up for a few seconds but then went a way and loaded into the recovery manager where it wants to do a system restore, but I am stuck now in a loop of it trying to restore and then restarting with no progress. If the CL driver is the problem is there anyway I can get audio in windows 7 if the driver prevents me from starting up?
View 3 Replies View RelatedThis issue has just start a couple of days ago were the computer would restart at the point of the boot logo just before the orbs came in, i have tried booting in all safe modes and the computer would restart, tried repair and it restarts before finished loading. I have tried using the os install disk but it also restarts. There is no BSOD. Is there a way to fix this or would i have to replace my motherboard?
View 6 Replies View RelatedI've installed Ubuntu 11.04 on my notebook ASUS U36SD. It worked perfectly fine for 4 months. Recently, I decided to install the last version of Ubuntu, 11.11. From now, Windows 7 doen't want to boot: It freezes at the boot screen. I tried to use the repair mode, but it failed. I also tried the safe mode. It still does't boot and freeze when loading CLASSPNP.SYS.
The only way I could get rid of it was totally wiping my 2TB WDigital drive SATA. Now after I used KillDisk, I boot up the Installation disk and after the 'Starting Windows' screen, it goes to a black screen with a blinking cursor. Now, I know it's not the disk because I have a laptop that I was able to boot it up on and install perfectly fine. I know it's not the CD/DVD drive because I was able to boot other disks such as KillDisk with no problem. I'm not sure if there was still something I needed to do after wiping it with KillDisk to make the drive usable again. Also, I tried using another hard drive I had laying around which was a 320GB SATA. That one had some different problem booting up the Windows that was already installed on it. So.. again I used Killdisk and it does the same thing after wiping it.
View 9 Replies View RelatedSo i burned an .ISO Windows 7 ultimate ( 64 bit ) right now im running on ( 32 bit ) I can't install directly trought dekstop because i get this error "this installation disc isin't comaptible with your version of windows.." So i tried to boot with installation disc, after "setup is loading files" or something, i just get a windows 7 start up screen no letters or anything it just stays there. Only the cursor blue wheel thingy spins for few seconds. I tried different installation files.
View 7 Replies View Relatedat the moment I got two Windows 7 installations on a single hard drive. A Windows 7 Ultimate x64 for my office applications and a seperated Windows 7 Home Premium x64 for all of my games.Windows 7 Ultimate is on the first partition (C:) and Home Premium is on the 2nd partition - it was installed from within Ultimate so it has the drive letter D:.I now want to move the second installation to a new harddrive. This would have been an easy task with the goold old boot.ini - just editing the disk and partition number (example: (0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP") to suite the new situation after moving the content of partition 2 to the second harddrive.Is there a similar command for the bcdedit to just change to target of the bootloader for Home Premium from disk(0) partition(2) to disk(1) partition(1)?
View 7 Replies View RelatedMy Computer won't Boot windows 7 DVD to make a clean install, I did everything on bios to Boot from "DVD first" but It won't work but It works when you make the Windows 7 installation from Windows.
View 8 Replies View RelatedHow to Do a Dual Boot Installation with Windows 7 and Vista ?
View 0 Replies View RelatedI have 2 brand new Asus K52JT laptops with the following specs:- i3 380M- 4Gb DDR3
- HDD SATA II 750Gb- ATI Radeon 6370M 1GbThey both came with Free Dos installed.On one of them I have successfully installed Windows XP , tweaking the bios to use the ATA instead of the AHCI controller. Generally the drivers work fine except for the card reader witch doesnt want to install. Being pleased with the results I have decided to leave the first laptop like this and experiment a little with the other one.What I want to do is use nLite software to inject the SATA drivers into an Windows XP installation iso to enable the AHCI controller and install.Then, if everything works fine I would like to install Windows 7 x64 on another secondary partition as the second OS.The problem is that I am not sure witch SATA drivers i need and from where to procure them.My question would be if anyone has tried something like this before and if there are any general rules or knowledge that i should be aware of.
i have Windows 7 installed which i installed it my self 24hours later i decided to install another OS a dual boot with XP (i dont know what im doing) so ive install it normally as i installed Windows 7 with DVD on but different partation location after successfully installed my computer restart the Asus logo pop up after that some long msg "OS Error" at the top left of my screen or something that i keep restarting and trying to find the SafeMode but i dont know how?(it new Motherboard) to go with SafeMode?
i know pressing an F8 but instead it takes me to select a Boot menu with DVD-Driver/Hard Disk Driver so i got stuck , so i reinstalled an OS but this time i reformatted the partation where Windows 7 installed so i can installed the XP from there now the installation is finished it restarted again but this time its not error OS msg its just it gives me the blinking " - " DOT from top-left of my my screen..theres nothing i can do on what i know for now but right now im installing back again to Windows 7 hopefully it fixed but still i need your help Windows 7 is very new and good awesome OS not every applications and games can compatible with it thats why i still like XP or possible going Dual Boot of Windows7+XP.
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me saying Setup was unable to create a new system partition or locate an existing system partition.The stupidity that I did was deleted the partition which had the Recovery Drive in it. So, now I am stuck and not able to install Vista as well as Windows 7. I am not able to boot Windows as there is no OS in my laptop now.
View 9 Replies View Related