Windows 7 Crashed During Installation Now We Can't Boot?
Jan 2, 2012
My mate had trouble with wayyyy too low fps in a game.W decided to install Windows 7 ultimate x64 on his laptop then.We couldn't upgrade vista to it, so we chose the "custom install" option, where Windows 7 gets installed separately and vista gets moved into a folder called windows.old.We were almost done with the install and had just passed the time and network setup, suddenly a small window flashes with the text "windows failed to complete...." we couldnt see the rest and the laptop rebooted.Then we got continually stuck on "press any key to boot from CD or DVD...".Sometimes we get it to continue and it gets stuck on "Windows is loading files". And 2 times it completed loading files and shut down instantly after.
View 6 Replies
ADVERTISEMENT
Feb 25, 2011
When I installed Windows Live Essentials 2011 on my new Compaq Presario CQ5621F with Windows 7, it seemed to load fine. I tried to access the internet and got no connection. When I rebooted my computer it suggested that I restore to an earlier time. Upon doing so it works fine again.
View 3 Replies
View Related
Mar 22, 2012
during the night yesterday my computer crashed, i can't boot it at all. keeps giving me video signal errors, but when I use a linux live dvd, everything works fine, so it is only windows7 that is the problem... I tried using the W7 installation disc but the recovery and restore functions are not working either.
View 6 Replies
View Related
Apr 4, 2011
My laptop used to run on Windows 7 Home Premium 32bit, but the OS crashed and just wouldn't boot. I tried using my laptop's recovery disc, but that had some problem and doesn't help me restore my laptop. I hope to format my hard-drive and do a fresh install of Windows 7. But for that I don't have an installation disc, I have a registered key for Windows 7 at the bottom of my laptop though
View 7 Replies
View Related
Jul 9, 2012
I recently bought a new power supply, along with more ram because I was already ordering the power supply. When the package came and I set everything up in the computer, the PC turned on and everything was fine. I started to play a game with my friend and the computer just turned off. No error message, nothing. I believe the computer overheated, but I could be completely wrong. Now, when I start my computer up, it gets to the Launch System Repair (Recommended) or Start Windows Normally. If I select one of them, it will get into the 'Starting Windows' screen with the orbs, and then the monitor will just go blank. The computer still runs in the background, but my monitor just is blank. It is not the RAM (I switched and went to my old RAM) And I also cannot boot into safe mode, or anything of the sort, as the same thing happens. And I cannot boot from a CD (Tried with a windows 7 repair disc and computer goes blank again)
View 9 Replies
View Related
Aug 18, 2011
Ok so my computer was running sluggish before it eventually totally froze up. I reset the laptop (dell inspiron duo) and now everytime after going through dell screen/bios it tells me that "windows failed to start. A recent hardware or software change may be the cause" or something like that and gives me the option to load either run windows normally or launch startup repair.No matter which option I choose I get windows is loading files and a White loading bar at the bottom of the page. Once this is complete the Microsoft green loading bar, no logo, will run through once before taking me to a blue screen which appears to be some kind of back ground. There's a dove carrying a branch and some White lines/lighting effects. This isn't my home screen and all that I can do is move the cursor around.
Nothing else happens and there is none of the usual start up behaviour.As far as I am aware there is no malware and the only new software that has been installed was the drivers to use an xbox controller with the pc via plug and play which was around 12 hours ago and the machine has since been turned on and off without problem up until now.
View 3 Replies
View Related
Jan 9, 2012
My computer crashed today and I can't get it to boot up. I can hit ESC during startup and get the menu. I ran all the tests and everything passed. I am trying to create a Windows 7 disk so I can boot it from there since my computer won't start up. I'm not sure where I can download this.
View 7 Replies
View Related
Jun 3, 2011
It's a dell latitude, 1 year old. Laptop suddenly crashed and when the laptop booted it said: "no boot sector on internal hard drive". I tried repairing the boot sector with the windows repair function, but the hard drive is just empty... nothing to repair. Then I tried to boot off a ubuntu live cd. which worked. and showed me an empty hard drive with the_maximum_capacity_of_the_drive_GB of unallocated space.
Since that I reinstalled windows 7 two times, and stopped working after an hour or so. I installed ubuntu, which worked for several days. then i tried windows 7 again (clean install). And then I kept working on the laptop for a couple of hours until the "crash" happened. All the programs stopped working suddenly. When I opened anything I was shown this error: "Illegal operation attempted on a registry key that has been marked for deletion."
After that everything is lost if I turn the computer off. And I'm back at an empty unformatted hard drive. I changed the sata operation mode in the bios to different options before every installation of windows. I didn't try xp, because I don't have dell-xp cd's . Is the hard drive broken? I guess not because ubuntu works. and windows 7 also, but it just goes away suddenly... Here's a video (shot in portraitmode) of the event... [URL].
View 8 Replies
View Related
Dec 3, 2012
From my windows DVD, I've made an ISO image of it so I can copy it fully onto my USB(making it an ONLY install USB). The copying process took about 1-2 hours. I checked if the file were all there and it was. I then attempted to boot it from USB at the start of computer. I chose BOOT MENU > USB DEVICE, it takes about 1 minute then it says "Selected device is not available - press F11 to try again and F12 for setup" I think it was like this."The files were all there, with the autorun.inf and all codes are good but how come it won't boot?
View 9 Replies
View Related
Jun 28, 2010
I currently have 4 drives. I had Vista on my primary drive1, no OS secondary slave drive, Linux on my sata drive1, and Windows 7 64x on my sata drive2. I recently deleted Vista and installed windows 7 86x on my primary drive. Before installing Windows 7 86x the windows boot option gave me the choice to choose between the three OS and now it does not. The Windows 7 x64 drive is accessible and I'm able to view all folders but I can't get it to boot and that is where I have all my programs and work.
How can I get the boot manager to recognize my windows 7 64x drive which is not the primary drive?
View 3 Replies
View Related
Jul 14, 2010
well I'm having a bit of a problem. I got Windows 7 Pro 64bit installed on my computer but it won't boot up into it. It just sits at the screen "Loading Operating System." and does nothing.I'm at a loss at what I need to do. I can reinstall 7 if needed which will get me to the desktop but once I restart, it doesn't boot into it (ok I haven't tried a second time but I will in a sec).So does anyone have any idea on what I need to do?My motherboard Newegg.com - GIGABYTE GA-880GM-UD2H AM3 AMD 880G HDMI Micro ATX AMD MotherboardI have an old 80gb hdd as my main drive. Brand: Seagate
View 5 Replies
View Related
Nov 30, 2012
Recently i decided to stick some extra RAM in my old computer as 2GB didn't seem like enough. After removing the 2x 1gb sticks and putting in everything (2x 2gb and 2x 1gb) when i got to windows boot up screen it took a while to load, and then froze. I played around with the RAM, tried only one of the 2gb in all 4 DDR2 slots and it booted perfectly, i did the same with other 2gb stick and same result so it isnt the RAM, and neither does it seem its the slots. Did the same thing with the 1gb and fine. tried every permutations involving the 4 sticks but whenever i top 2gb windows freezes.I read around first and looked at similar problems people have had on this, and so i cleared the CMOS and updated the BIOS but still the same result (didn't do all permutations this time). Here is the specs for everything:
Mobo- P5N32 SLI SE DELUX http://uk.asus.com/Motherboards/In [...] SE_Deluxe/
RAM- Corsair 2GB 800 DDR2 and Corsair 1GB 667 DDR2
Relevant Info from CPU-Z:
Memory
[code].....
View 19 Replies
View Related
Dec 6, 2011
Have dual boot; XP and 7. 7 will no longer boot, asking for the installation CD. I don't have an installation CD, only the one that puts everything back as it was when purchased. Can I get a boot file that will boot from USB? Or since I can see the 7 drive from XP, could I add a file to Win7? I checked on EasyBCD that is supposed to work, but I' use RollBack and it won't work with RollBack installed. I'm afraid to uninstall RollBack since it has saved me so many times in the past.
View 3 Replies
View Related
Mar 5, 2011
i have hp pavilian core to dou system with 2.2 Gh processor, 1 gb ram. it was running successfully with windows ultimate new but it was corrupted and i have lost the dvd of ultimate new. Now i am installing window7 ultimate it installs successfully but after installation when i boot my system from hard drive then it is unable to boot.a blank black screne appears with blinking cursor. but no message to display.
View 5 Replies
View Related
Oct 30, 2012
My friend's Gateway laptop has problems and I want to install Windows again. But when I try to boot to the installation disk, after I select the DVD in the boot selection menu, I just get a blank screen with a flashing cursor. After a few minutes, one time I saw a message that said something like "bootmgr cannot be found" or is missing or something like that.
But the computer can successfully boot to a Puppy Linux boot disk.
View 7 Replies
View Related
Mar 29, 2012
After formatting and setting a new partition using the installation disk, I install Windows 7, all goes well. But as soon as the installation is finished and my laptop restarts, it wont boot from the HDD. I keep getting error messages saying:
Windows Boot Manager
Windows failed to start....
File: ootBCD
Status: 0xc000000e
[Code].....
A copy of the current boot configuration data will be saved as c:ootcd.backup.0001
However when i hit the "ok go ahead and fix it then!"-button i get another error saying Startup Repair cant save the new boot options. Anyone know if i can fix this problem with BCDedit or bootrec.exe
View 3 Replies
View Related
May 15, 2012
My computer has been unable to boot to the Windows 7 installer for the past two days. My boot order is correct I have confirmed that the drive works (It runs a live CD of Ubuntu just fine). I have checked that the disk works (it boots fine in another machine). I have used this same disk on this computer before several times before with successful outcomes.
My diagnostics come back successful as well. I'm on a Dell Studio 1735 (from 2008). I'm really at a lost as to why it's not booting to the DVD. I'm currently typing this from my Ubuntu partition; I don't have convenient access to a Windows machine at this point.
View 3 Replies
View Related
Jun 17, 2012
is there a way so that windows installation through dvd using boot can be prevented? as anybody who knows installation can install windows to remove password. and is there a way so that local users on a pc cannot use usb ports and other external devices?
View 7 Replies
View Related
Apr 28, 2009
How to Do a Dual Boot Installation with Windows 7 and XP ?
View 0 Replies
View Related
Mar 10, 2011
i've had some issues installing sp1 (7 ultimate, latest windows updates) via windows update when the installation fails on a few different error codes, but i have gotten it to install a few times. each time the installation finishes, i restart the computer when prompted and it goes through the update process when shutting down, then after the windows 7 splash screen ("starting windows") passes, the screen goes blank (black screen, no video- monitor displays "going to sleep" message) and the HDD light on the computer is lit solid. i've left the computer sitting for hours with no change- i eventually get Windows to boot again by using the install disc to do a Windows restore, but i haven't been able to get past this yet.
View 6 Replies
View Related
Aug 26, 2011
In process of creating a slipstreamed XP Install disk, but need to get the SATA drivers for this machine, as obviously there in no floppy to use. The factory disk has 2.5 GB of drivers, which obviously is more than I need, plus they will not fit on the CD.
View 3 Replies
View Related
Oct 28, 2009
After I installed Windows 7 64bit I found out that I had no sound so I went and download the latest driver for my Creative Labs X-fi Xtream gamer audio card. After I installed it and then restarted the regular "starting windows" came up for a few seconds but then went a way and loaded into the recovery manager where it wants to do a system restore, but I am stuck now in a loop of it trying to restore and then restarting with no progress. If the CL driver is the problem is there anyway I can get audio in windows 7 if the driver prevents me from starting up?
View 3 Replies
View Related
Jul 24, 2010
This issue has just start a couple of days ago were the computer would restart at the point of the boot logo just before the orbs came in, i have tried booting in all safe modes and the computer would restart, tried repair and it restarts before finished loading. I have tried using the os install disk but it also restarts. There is no BSOD. Is there a way to fix this or would i have to replace my motherboard?
View 6 Replies
View Related
Feb 16, 2012
I've installed Ubuntu 11.04 on my notebook ASUS U36SD. It worked perfectly fine for 4 months. Recently, I decided to install the last version of Ubuntu, 11.11. From now, Windows 7 doen't want to boot: It freezes at the boot screen. I tried to use the repair mode, but it failed. I also tried the safe mode. It still does't boot and freeze when loading CLASSPNP.SYS.
View 3 Replies
View Related
Jul 23, 2012
The only way I could get rid of it was totally wiping my 2TB WDigital drive SATA. Now after I used KillDisk, I boot up the Installation disk and after the 'Starting Windows' screen, it goes to a black screen with a blinking cursor. Now, I know it's not the disk because I have a laptop that I was able to boot it up on and install perfectly fine. I know it's not the CD/DVD drive because I was able to boot other disks such as KillDisk with no problem. I'm not sure if there was still something I needed to do after wiping it with KillDisk to make the drive usable again. Also, I tried using another hard drive I had laying around which was a 320GB SATA. That one had some different problem booting up the Windows that was already installed on it. So.. again I used Killdisk and it does the same thing after wiping it.
View 9 Replies
View Related
Dec 3, 2012
So i burned an .ISO Windows 7 ultimate ( 64 bit ) right now im running on ( 32 bit ) I can't install directly trought dekstop because i get this error "this installation disc isin't comaptible with your version of windows.." So i tried to boot with installation disc, after "setup is loading files" or something, i just get a windows 7 start up screen no letters or anything it just stays there. Only the cursor blue wheel thingy spins for few seconds. I tried different installation files.
View 7 Replies
View Related
Dec 6, 2009
at the moment I got two Windows 7 installations on a single hard drive. A Windows 7 Ultimate x64 for my office applications and a seperated Windows 7 Home Premium x64 for all of my games.Windows 7 Ultimate is on the first partition (C:) and Home Premium is on the 2nd partition - it was installed from within Ultimate so it has the drive letter D:.I now want to move the second installation to a new harddrive. This would have been an easy task with the goold old boot.ini - just editing the disk and partition number (example: (0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP") to suite the new situation after moving the content of partition 2 to the second harddrive.Is there a similar command for the bcdedit to just change to target of the bootloader for Home Premium from disk(0) partition(2) to disk(1) partition(1)?
View 7 Replies
View Related
Dec 11, 2009
My Computer won't Boot windows 7 DVD to make a clean install, I did everything on bios to Boot from "DVD first" but It won't work but It works when you make the Windows 7 installation from Windows.
View 8 Replies
View Related
May 5, 2009
How to Do a Dual Boot Installation with Windows 7 and Vista ?
View 0 Replies
View Related
Oct 4, 2011
I have 2 brand new Asus K52JT laptops with the following specs:- i3 380M- 4Gb DDR3
- HDD SATA II 750Gb- ATI Radeon 6370M 1GbThey both came with Free Dos installed.On one of them I have successfully installed Windows XP , tweaking the bios to use the ATA instead of the AHCI controller. Generally the drivers work fine except for the card reader witch doesnt want to install. Being pleased with the results I have decided to leave the first laptop like this and experiment a little with the other one.What I want to do is use nLite software to inject the SATA drivers into an Windows XP installation iso to enable the AHCI controller and install.Then, if everything works fine I would like to install Windows 7 x64 on another secondary partition as the second OS.The problem is that I am not sure witch SATA drivers i need and from where to procure them.My question would be if anyone has tried something like this before and if there are any general rules or knowledge that i should be aware of.
View 2 Replies
View Related
Dec 31, 2009
i have Windows 7 installed which i installed it my self 24hours later i decided to install another OS a dual boot with XP (i dont know what im doing) so ive install it normally as i installed Windows 7 with DVD on but different partation location after successfully installed my computer restart the Asus logo pop up after that some long msg "OS Error" at the top left of my screen or something that i keep restarting and trying to find the SafeMode but i dont know how?(it new Motherboard) to go with SafeMode?
i know pressing an F8 but instead it takes me to select a Boot menu with DVD-Driver/Hard Disk Driver so i got stuck , so i reinstalled an OS but this time i reformatted the partation where Windows 7 installed so i can installed the XP from there now the installation is finished it restarted again but this time its not error OS msg its just it gives me the blinking " - " DOT from top-left of my my screen..theres nothing i can do on what i know for now but right now im installing back again to Windows 7 hopefully it fixed but still i need your help Windows 7 is very new and good awesome OS not every applications and games can compatible with it thats why i still like XP or possible going Dual Boot of Windows7+XP.
View 1 Replies
View Related
