My computer crashed today and I can't get it to boot up. I can hit ESC during startup and get the menu. I ran all the tests and everything passed. I am trying to create a Windows 7 disk so I can boot it from there since my computer won't start up. I'm not sure where I can download this.
View 7 RepliesThis is the exact laptop I have, Asus X54C 15.6 inch laptop (Intel Pentium B960 2.2GHz, 8Gb RAM, 500Gb HDD, DVDSMDL, LAN, WLAN, Webcam, Windows 7 Home Premium 64-bit): Amazon.co.uk: Computers & Accessories
This morning when turning it off, it started to update with the usual screen saying not to turn it off or unplug. I went out to do some stuff, and when I came back my laptop was turned off so I assumed the installation had finished. However when I pressed the power on button the laptop turned on, it was still how I had left it installing updates. However it seemed to be making no progress whatsoever. It was still on 1 of 60 updates. I left it for a while, but I needed to take it home and seen as it wasn't doing anything I held the power on/off button to power down the laptop to take it home. When home the laptop would refuse to boot to windows, and the screen would just go black. I tried to start the laptop in safemode, but again it wouldn't load. I performed startup repair but it said the problem couldn't be fixed. I then performed a system restore, however it also said that could not be performed. However after clicking okay, windows loaded up and prompted me to log in. Upon which I am on the computer now with no problems, a contradictory message came up saying that the system restore had been succesful. I'm now worried that there still could be some problem that might arise when I close down my computer and need to start it up the next time, in addition it is wanting me to install updates and prompting me to restart my computer. Does anyone have any advice on how I can ensure that the computer does not have the same problems again when updating, and in addition how can I make sure that there are no problems waiting in the computer to surface again and it is fixed?
I recently bought a new power supply, along with more ram because I was already ordering the power supply. When the package came and I set everything up in the computer, the PC turned on and everything was fine. I started to play a game with my friend and the computer just turned off. No error message, nothing. I believe the computer overheated, but I could be completely wrong. Now, when I start my computer up, it gets to the Launch System Repair (Recommended) or Start Windows Normally. If I select one of them, it will get into the 'Starting Windows' screen with the orbs, and then the monitor will just go blank. The computer still runs in the background, but my monitor just is blank. It is not the RAM (I switched and went to my old RAM) And I also cannot boot into safe mode, or anything of the sort, as the same thing happens. And I cannot boot from a CD (Tried with a windows 7 repair disc and computer goes blank again)
View 9 Replies View RelatedOk so my computer was running sluggish before it eventually totally froze up. I reset the laptop (dell inspiron duo) and now everytime after going through dell screen/bios it tells me that "windows failed to start. A recent hardware or software change may be the cause" or something like that and gives me the option to load either run windows normally or launch startup repair.No matter which option I choose I get windows is loading files and a White loading bar at the bottom of the page. Once this is complete the Microsoft green loading bar, no logo, will run through once before taking me to a blue screen which appears to be some kind of back ground. There's a dove carrying a branch and some White lines/lighting effects. This isn't my home screen and all that I can do is move the cursor around.
Nothing else happens and there is none of the usual start up behaviour.As far as I am aware there is no malware and the only new software that has been installed was the drivers to use an xbox controller with the pc via plug and play which was around 12 hours ago and the machine has since been turned on and off without problem up until now.
during the night yesterday my computer crashed, i can't boot it at all. keeps giving me video signal errors, but when I use a linux live dvd, everything works fine, so it is only windows7 that is the problem... I tried using the W7 installation disc but the recovery and restore functions are not working either.
View 6 Replies View RelatedMy laptop used to run on Windows 7 Home Premium 32bit, but the OS crashed and just wouldn't boot. I tried using my laptop's recovery disc, but that had some problem and doesn't help me restore my laptop. I hope to format my hard-drive and do a fresh install of Windows 7. But for that I don't have an installation disc, I have a registered key for Windows 7 at the bottom of my laptop though
View 7 Replies View RelatedMy mate had trouble with wayyyy too low fps in a game.W decided to install Windows 7 ultimate x64 on his laptop then.We couldn't upgrade vista to it, so we chose the "custom install" option, where Windows 7 gets installed separately and vista gets moved into a folder called windows.old.We were almost done with the install and had just passed the time and network setup, suddenly a small window flashes with the text "windows failed to complete...." we couldnt see the rest and the laptop rebooted.Then we got continually stuck on "press any key to boot from CD or DVD...".Sometimes we get it to continue and it gets stuck on "Windows is loading files". And 2 times it completed loading files and shut down instantly after.
View 6 Replies View Relatedplaying around with my new computer, i was trying to record a sound playing on Internet with the microphone using the sound recorder. after about 10 seconds, the whole system froze - i couldn't even move the mouse cursor and had to unplug the computer and re-boot. what's the problem and is there an easy fix? below is a screen shot of my system specs, if that's any help.
View 1 Replies View Relatedas the title says, I was just talking with some friends on skype and then the computer froze like when it's going to give you a BSOD but instead of that it just froze, so I turned it off and now the computer won't even show BIOS menu. RAMs are fine, they were tested by the retailers for 48 hours with memtest and tested by me for 24 hours (when the computer used to work).So to give you a clearly idea of what's happening, I press the power on button, there's a beep and the computer starts, right? my pc powers up but it never beeps, the CD/DVD reader works, the processor starts up, but it's just stuck there. I checked on the motherboard's user guide and it doesn't say anything about "not beeping"
View 9 Replies View RelatedI just got my first computer in place i installed win 7 on it and everything went smooth, but then i realized i had by misstake installed the 32bit version..so i checked the SSD, which is the only kind of storage drive i have right now, and for some reason the installation had made an partition called system drive or something on 100mb. the stupid thing is that it was nothing on it?? windows was still on C:? anyway , after many minutes of thinking i decided to just reinstall windows over the old one and so i did. it runned smooth and went perfect, i checked the preferences of my computer and as planned i now had the 64 bit version but 30Gb was lost on my SSD? i discovered that the old windows was still there, in the windows.old folder... i didnt think about much so i'd just pressed delete...
the crash: loud noise came from the computer and it shut off, now i cant get it to work!!!!!when i start it all the lights starts and the fans runs but nohting moreand how do i format the ssd so i can use it when i've fixed the computer!specs:Motherboard: MK Gigabyte Z68X-UD3H Socket 1155, Z68 CPU:Core i5 2500K Graphic: GK EVGA GeForce GTX 570 SC RAM:Corsair 8GB (KIT) DDR3 1600MHz/VENG. Drive:SSD 120GB Corsair SATA 2.5", Force 3 Series Cooler:Cooler Master Hyper 212 Plus CPU cooler AMD/Intel PSU: XFX XPS-750W BE ATX 12V EPS 12V
Computer threw out a bunch of weird language and then said crash and shut down. Now it doesn't really boot or reboot. I have to pull the battery to get it to restart and I get the HP logo when I put the battery back in and it takes me to a Windows Errory Recovery screen with two options: Launch Repair or Launch normally. Neither one of them does anything. I just get the blue screen.
I've tried the f8 key and the f10 key and can't seem to get to any other screen. I put the restore disk into the CD rom drive and I don't think it's accessing it at all.
It is an HP Pavilion dv7-4087cl with an Intel Core i5-430M processor and its running Windows 7 Home Premium OA 64 bit.
I am no expert when it comes to computers so please bear with me. My Acer Aspire laptop crashed on me. It uses Windows 7. Start up repair does not work. I have a set of Windows 7 disks, 32 bit and 64 bit. Not too sure which one I should have used so I tried both with the same results. I have tried to re-install Windows 7 again as well as repairing the Windows 7 which is already on my computer with the disks with no luck. When re-installing it gets stuck at 'Setup is starting'. It stays like that for hours. When I try the repair option it gets stuck at 'checking for operating system' or something to that effect, also for hours on end
View 9 Replies View Relatedi was on [URL] and found win8 login for 7 i replace authui.dll in system32 and sysWOW64 also replased basebrd.dll
then tried it out by switching user i got black screen then rebooted and i still got a black screen
then i booted into startup repair and then it gave me an error now i have startup repair infinite loop
I am writing this windows safe mode.Cannot get computer to boot in reg mode. Sat for 40 minutes, with message "please wait while windows configures"Am running windows 7, 64 bit home, Dell Inspiron 570 It started yesterday when it downloaded updates for Windows. After the restart, the computer screen looked strange and could not open any programs. Went to "start" and re-booted, same thing happened again. I again went to start, this time it came up with 2 errors. (wish I had wrote them down) but said something about windows cannot find such and such. (sorry) Anyway, clicked on the "X" and windows came up again, but nothing would open. Had to hard boot as the start button would not even work.Rebooted into safe mode and have tried to return to a previous restore point. Seems I don't have any. So can't do that. I did go go to the recent installed windows updates and deleted them. But will not let me change the settings as in: Don't install updates automatically. I don't know if it is trying to install those over and over again. I tried to get it to come up again with the errors, but no such luck, it just sits with the blue welcome screen, then the "please wait"
View 9 Replies View RelatedMy computer crashed and I lost all my Sims data. I tried to reinstall with the original discs but when I got to the 20 digit code on the box, it said it was invalid (probably because it belonged to me). I had installed Sims 3, Expansion packs World Adventures, and Ambitions. I recently bought Late Night, but my computer crashed before I downloaded it. How can I reinstall these? Will any of the work I did on each one be restored, or will I need to start in the beginning of each one?
View 1 Replies View RelatedMy computer just crashed due to the reason "IRQL less than or equal" or something along those lines, because it was only up for a second before my computer crashed. Minidump file is included in case anyone can help me. I think it might have to do with my ram, because ever since i bought it (around 2 months ago) i have crashed 4 times.
View 1 Replies View RelatedWhen I installed Windows Live Essentials 2011 on my new Compaq Presario CQ5621F with Windows 7, it seemed to load fine. I tried to access the internet and got no connection. When I rebooted my computer it suggested that I restore to an earlier time. Upon doing so it works fine again.
View 3 Replies View RelatedI left my laptop running for a while when i left the room. When I came back it had frozen, I hadn't been doing anything untoward, I had been running a few programs at once, just like firefox and word. Anyway I had to turn it off with the power button. Then when I tried turning it back on I was able to log in but there was no desktop, just a black screen, same thing when I used safe mode. Now whenever I turn it on it goes to a disc check and when it gets to a certain number it says its unreadable and safe search just plain doesn't work. I'm gonna lose all my files. So is there anyway I could do a restore to factory settings (restoring to another time also didn't work)
View 2 Replies View RelatedSomething really strange happened one day when I ran one of my games. Well, The game crashed several time and when I went to open it in again, my documents wouldn't open! I went to "my computer" clicked it and still nothing happened. Whenever I click "my documents" the document screen just goes off to the side of my screen and nothing happens, same problem when I try to open "my computer". I have run scans with Norton and Malware Bytes but it cannot find any virus, my computer seems clean at the moment.
View 9 Replies View Relatedcomputer crashed have windows 7 OEM disk and half the product key . How can i get the product key?
View 3 Replies View RelatedIt's a dell latitude, 1 year old. Laptop suddenly crashed and when the laptop booted it said: "no boot sector on internal hard drive". I tried repairing the boot sector with the windows repair function, but the hard drive is just empty... nothing to repair. Then I tried to boot off a ubuntu live cd. which worked. and showed me an empty hard drive with the_maximum_capacity_of_the_drive_GB of unallocated space.
Since that I reinstalled windows 7 two times, and stopped working after an hour or so. I installed ubuntu, which worked for several days. then i tried windows 7 again (clean install). And then I kept working on the laptop for a couple of hours until the "crash" happened. All the programs stopped working suddenly. When I opened anything I was shown this error: "Illegal operation attempted on a registry key that has been marked for deletion."
After that everything is lost if I turn the computer off. And I'm back at an empty unformatted hard drive. I changed the sata operation mode in the bios to different options before every installation of windows. I didn't try xp, because I don't have dell-xp cd's . Is the hard drive broken? I guess not because ubuntu works. and windows 7 also, but it just goes away suddenly... Here's a video (shot in portraitmode) of the event... [URL].
I had a bit of bad luck today and my laptop fell on the ground and cracked the case. I checked to make sure everything was functioning and running alright and everything seemed fine, so i proceeded to run solidworks and work on a project and again everything was working fine for about 40 minutes than blue screen popped up and computer tried to restart. When it started backup a screen popped up saying to run startup repair. Ran the repair and when a command window popped up i get a white screen saying error in big red font. So i restarted again and tried to start windows normally it began starting up but switched to start up repair automatically and same thing while start up repair was beggining.to stop happening preferably without re formatting and losing files as i have some really large solidworks files that i need for a project and dont have time to re draw
View 1 Replies View RelatedI can run World of Warcraft and Battlefield 3 at max settings and NOTHING happens. Runs like a dream. However if I play any over games such as Skyrim or the Witcher 2 my computer will completely crash to a black screen and then a weird buzzing noise which lasts 1-2 seconds. It will then require a hard reset.
This crash only happens when I play video games and it seems adjusting the settings doesn't seem to change anything. High or low settings it will still crash. I have ruled out Temperature I think. At it's hottest my GPU will be at about 55C.
My Specs- Operating System:
Windows 2.6.1.7601 (Service Pack 1)
CPU Type:
Intel� Core™ i7 CPU 960 @ 3.20GHz
CPU Speed:
3.2 GHz
System Memory:
7.99 GB
Video Card Model:
NVIDIA GeForce GTX 580
Video Card Memory:
3.97 GB
here iv build this pc and now im starting to get this it worked fine for about week.
View 1 Replies View RelatedBasically, i used to be able to use my fast forward, pause/play, stop, and volume control buttons to control my itunes and the volume.now, the volume control does not show the bar on the screen that shows what level the volume is at when it's changing volume, and my pause/play, fast forward, rewind, and stop buttons only work when itunes is the main window.it used to control itunes even when itunes was in the background.
View 3 Replies View RelatedWhen I turned my PC on today, a weird window shows up.[url]...
View 9 Replies View Relatedbeen awhile since i been here but im back sadly and worried...So ima explain best i can what i did that maybe caused the BSOD. First off my cpu is OC but barely and no voltage changes and has been that way for 3 or so months. By default it runs at 3.8Ghz and i just OC it to 4.0Ghz and its been running that way fine for months and its made to be OC way more so i highly doubt its that. 2nd. I do have dameon tools and i see alot of ppl say that can cause it but again, its been on pc 4 ever and never had no issues with it and it rarely gets used but it still does get used here and there.3rd. I installed some codecs yesterday to try to get sony vegas to read a video and i probably installed 3 different codecs and some were named the same and it was the coded for a h264 or something like that, i already uninstalled that.
4th. No major changes have been made to pc, no recent windows updates, program installs or nothing has been done. Only thing i did most recently yesterday was upgraded a widget for reading GPU and its called GPU meter.5th. Finally and im scared this might be the issue is i noticed on sony vegas ( video editing program ) that it likes to max out all my cores and i noticed the temps reached 90-94 on my cpu which really scared me but ive only used this program twice but i was thinking maybe it was damaging my cpu but not sure.The last thing i was doing when it BSOD was i had a video uploading to facebook and firefox was open and a little dialoge box telling me how far video was done and apparently it got finished and i went to get drink and came back and BSOD was up and the pc didnt auto restart like it did before, had to force shutdown and restart.
A few months back, I reinstalled windows after updating my bios.I screwed things up pretty badly because instead of just setting the Bios options to recognize my RAID array and though there was some bigger issue at play an ended up reinstalling windows before I figured it out. Anyway, everything worked fine for a few months, but then this not genuine box started appearing and disappearing in the bottom corner. It does go away, and I am able to install updates, so I think it's just an error with my bios as I saw in another thread, but I want to make sure before I touch anything. I ran the diagnostic report a few minutes back when the logo was down there (although it's since gone away again). [code]
View 1 Replies View RelatedMy windows 7 computer has crashed while using Windows Explorer - or most any file searches since I bought it in late 2009. It has all the upgrades and modifications from Microsoft and Dell, and continues to crash.If I open Windows Explorer, a Browser or any other program with a "File/open" capability, merely while scrolling down the directory listing, it will crash and worse, it will often take all the other opened programs on my screen with it.I have learned that re-trying two or three times somehow solves the program and I can get to what I'm looking for. Also, I have an old graphics program (Paint Shop Pro 5.1) which seems immune to this program. I'm running it under full compatibility mode, and I don't have this problem with it.I have contacted Microsoft so many times - to no avail - that I finally dumped the computer and bought an Apple. But we all know that Apple has it's own problems, so I jump over to the Win 7 machine occasionally. So I have the two computer sitting here side-by-side. Like any strangers, they don't speak to each other, and I'm the third party who needs the friendship of both, individually. I have pretty much decided, however, this Windows 7 model will be my last PC unless someone totally brilliant comes up with a "why this is happening" saving grace.
View 1 Replies View RelatedI am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies View RelatedHP Pavilion laptop purchased in June 2011 - still under a 2 year warranty, but would prefer to resolve this myself if at all possible.In the last few days I've started experiencing some BSOD issues, which got particularly acute late night...constant BSODing as well as just system freeze ups. I ran Avast antivirus scan, as well as a MalwareBytes scan and the Housecall scan. I used CCleaner, downloaded what windows updates my computer said were available. Was going to try to defrag but it crashed again. On a netbook right now.this is the BSOD error I get:---kernal_data_inpage_error***STOP: 0x0000007A (0x0000000000000020, 0xFFFFFFFFC000009D, 0xFFFFFA8006E0F078, 0x0000000000000000)Physical memory dumpy FAILED with status 0xC000009CI have no idea what that means - not super troubleshooting saavy beyond the basics
View 7 Replies View Related