Computer Crashed And Won't Enter Safe Mode, How To Restore It
Jan 29, 2012
I left my laptop running for a while when i left the room. When I came back it had frozen, I hadn't been doing anything untoward, I had been running a few programs at once, just like firefox and word. Anyway I had to turn it off with the power button. Then when I tried turning it back on I was able to log in but there was no desktop, just a black screen, same thing when I used safe mode. Now whenever I turn it on it goes to a disc check and when it gets to a certain number it says its unreadable and safe search just plain doesn't work. I'm gonna lose all my files. So is there anyway I could do a restore to factory settings (restoring to another time also didn't work)
My dad's hard computer crashed, and we've spent the better half of 12 hours trying to recover about 30 gigs of music off of it. The problem is that the Windows repair stuff that came with our Windows 7 Ultimate isn't helping AT ALL, neither is repair disks, or any other junk that you can think of (and believe me, we've tried it all). When we try to boot the hard drive we get a "Error Configuring System" message, and when we've tried to run Safe Mode by holding f8, it doesn't allow us to. Now, we've also tried running an alternate boot source from the BIOS menu, then holding f8 to see if it'll give us advanced BIOS options and allow us to get to safe mode that way... but to no avail.
i recently got a new mobo and ever since i haven't been able to figure out how to enter safe mode. the board is an asus m5a99x evo. when i try the traditional way and tap the f8 right after start-up i am taken to a boot device menu through the asus bios and after selecting my HDD i am immediately taken to the windows 7 loading screen. is there anyway to force safe mode on restart once in windows?
with the creation of a batch file which when run from normal mode it should take me to Safe mode with networking.considering the OS to be Xp and above, and with the next restart it should stay normal .
i just bought an asus u31s laptop a couple of weeks ago for school and all was great until today. it suddenly crashed and gave bsod. i was just on Internet or something, nothing special, but it had been running for a few hours. so now it won't boot up, it simply reboots constantly. i can't even get into safe mode. bios i can get into, but i'm unable to do anything, since it appears to freeze, when i get in there.
i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
I've been looking for a fix for 5 hours and no luck- System restarts as soon as it enters the splash screen, but I can enter into safe mode - SFC /SCANNOW Detects nothing.
Tried bootrec commands and did nothing.. . Tried chkdsk /f /r and still nothing. . . Tried start up repair like 30+ times and it didn't fix it and said no root cause.
I can manual enter sleep mode and it seems to work fine. Though I have had problems with it immediately waking up in the past, but I did manage to some how resolve that issue. However now, it will not automatically enter sleep mode. I've tried everything, I've read every article, I've changed all my settings and configured them to allow my computer to sleep. I'm not in a homegroup, went as far as locking all my folders to not share with anyone. I used the command prompt and typed: powercfg -requests and it dislpays this: FileSystemsrvnet and active remote client has recently sent requests to this machine. I tried disabling the internet from the computer, still not sleeping. Tried requestoverride command by entering: powercfg -requestsoverride FileSystemsrvnet the result is: An unexpected error condition has occurred. Unable to perform operation. You may not have permission to perform this operation.Yes, I am running cmd as administrator.
So, I have this system, and it bluescreens when I boot in to both "normal" and save modes, however it reboots instantly, so I can't see the error. I have gone into recovery console, and there are no system restore points. Windows cannot fix the startup "Automatically"
I'm currently using a windows 7 computer and am having trouble accessing system restore. As I start up the computer normally, I make it past the login screen to the main screen, and it freezes after a few seconds each time. Going on safe mode instead, I went to system restore only to find that is was turned off as well my network connections
I have a Sony Vaio which runs on windows 7 (don't know if it's 32 or 64?). I don't have any back up discs.
Computer started doing windows updates, when I turned the laptop on the next day it won't boot up normally or in safe mode. If I click on repair computer it scans and goes through the process but in the end it just takes me back to the same screen. I've tried to restore and I have several points come up in the list but it says beside them enable system protection for this (C Drive).
The only option I have is to put it back to factory settings which I would really like to avoid as I don't want to loose all my files. I have some of them on USB but not all.
After a power outage, my windows 7 will not boot without going into safe mode.How can I restore my system to boot automatically without going into safe mode.
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
I am familiar with System Restore, selecting earlier times, and the often-available option of undoing a System Restore. But I found out (too late) that according to Microsoft, System Restore done in Safe Mode is not able to be undone.I lost 1,000's of photos doing the system restore, now the only restore point option visible is what I believe to be the new one after I did the restore. Prior to me doing the System Restore, there were a number of times from me to choose from, I just chose one that was 10 days ago. Is there any software, method, or hack that I can use or do to recover the thousands of photos that were on my desktop and that were in folders on my desktop? It's a 1 TB HD?
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
On this recent windows update, 2/14/13, my computer froze on the "Preparing to configure windows" screen for several hours. I rebooted normally and the screen went to "configuring updates" and stuck at 67% for about an hour. I got frustrated with it and rebooted to safe mode to see if I could do a system restore and when I did it said there was no restore point back up! So I rebooted normally and now it is still just sitting on the "Preparing to Configure Windows" screen with the circle spinning. I am using Windows 7 Ultimate on a Dell Dimension 2400.
I have an L505D-GS6000 Toshiba Satellite with Windows 7. At the moment, I can only go on my lap top in safe mode. When I try to log onto it normally, it starts loading the things on my desktop and then freezes. I know that in safe mode, you are limited to what you can do, so I'm not sure if having no sound also is because of the safe mode or if it's related to what ever the problem is with the lap top as a whole.I have talked to a few people about it, some say I may have a virus that has frozen my drivers.I have Malawarebytes, and have run a full scan and nothing came up. I also am no able to download anything.
my Sony VAIO VGC-LA3 seems to have a problem. I recently did a clean install of windows 7, which was no problem and completely drama free. I then sourced all the relevant drivers and installed a few essential programs and updates to get the machine up and running. I was then prompted into doing a restart so the updates could be installed. Upon restart the machine came on, start up options flashed up as normal and proceeded to the windows loading screen. The screen then goes black and shows no sign of coming back on until I bet the 'blue screen of death' 5 minutes later. The HDD and WIFI light do flash during these 5 mins. Then the computer restarts after the BSOD and says that Windows wasn�t shut down correctly etc� I chose to start normally and the same thing happens again. I then chose to start in Safe Mode With Networking and the machine would go through the start up procedure as expected, loading the OS with only basic drivers. I have tried wiping the hard drive and doing another installation of 7, with no success, and have also tried Vista, with the same result.
I'm a complete novice at thisMy computer will not start-up normallyOr in safe mode, Failure ID 6CQ708-4RH6B4-XD03HF-60Q003 When I run hard disc testIt stops loading when it gets to Windowssystem 32driversNISx641008030.006SYMEFA64.sys
Whenever I would boot my computer, the splash screen would hang and would not move onto the password screen. I would then have to restart my computer and activate safe mode so I can access system restore, find a restore point and go back to how it was earlier. I know for a fact that the Windows updates have been the key problem here, so I always backtrack a few system restores before that.
Now, the problem has come back and my restore points are ALL GONE. As I'm typing this, I am running SFC /SCANNOW, and here is the message that comes up at the end:
WINDOWS RESOURCE PROTECTION DID NOT FIND ANY INTEGRITY VIOLATIONS.
Also, I cannot access system protection. On the System page, there are only three options, when there should be four. What is going on here? If I try to restart my computer without safe mode, it will just hang again.
I have recently run into some issues on my machine that runs Windows 7. I can't run Windows Media Player; it just says the file name and then "Server Execution Failed".
I was advised to go into safe mode and type a command into cmd. However, safe mode would not work. At first I thought it was an F8 problem, so I was advised to go into msconfig > boot and change the system to boot into safe mode. I did that to find that safe mode gets into the driver loading screen and stops at windowssystem32driversClassPnP.sys and seems to load.
It shows the cursor, but then disappears and my computer reboots. However, since my computer is set to load into safe mode, it constantly tries to log into safe mode, which doesn't seem to work, so it just restarts, tries to go into safe mode, but can't, so it restarts again, going through the process again and again.
I have tried pressing "Delete" key at the beginning of boot up, but it does not show any thing else I can boot from. When I do get the F8 thing working, I select "Boot Windows Normally" but it just goes straight to the bootup of safemode.
I have an Acer Aspire M3800 that only has the factory restore discs that Acer eRecovery Management has asked me to make when I first bought my computer. I obtained Windows 7 through the "free upgrade" program Acer is running.
when i was using yahoo 7 messenger suddenly that windows does not respond so i was disable to shut down my computer,i just push out battery compartment
All of a sudden, from just turning it on today, my laptop (a dell inspiron) now only works in what it calls 'safe mode'. This has literally just started, and no amount of turning it off and on again has fixed the problem. When I turn it on it loads up to the windows welcome screen, but instead of loading my desktop the screen goes completely black, sometimes with the mouse still on screen that I can move around. When I force it to shutdown, something in it bleeps loudly. (Note: I don't know if this might be related, but I've been having problems with my screen for a while now where it goes all pink and green, I know this is the wire between the screen and whatever it plugs into being loose, I just haven't gotten it fixed yet, but it's never done this and gone all black before.)
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
Yesterday I left my pc running, and when I came back, found a black screen.Rebooting, I came across some random characters in the POST and also in BIOS, after which, the same black screen. I googled this, removed the video card and the bios and post look normal now( i use the onboard video), but when trying to load windows, the pc reboots.I tried system repair, chkdsk. When trying to boot in safe mode, it loads up to "AtiPcie.sys", then reboots.
I have a Toshiba laptop running Win 7 (64bit). Lately the computer freezes up in less than five minutes if running in normal mode, leaving only hard-boot option. When restarting, I go to "Safe with Networking" mode, and everything seems to run fine, even internet. I have repeatedly run scans from: Malwarebytes; SuperAntiSpyware; SpyBot; Windows Defender; CCleaner; Periform FixCleaner; TDSSKiller, and probably another half dozen. I have reset the Hosts file, and recovered to a reset point established back in December, before the current problems began. Nothing has solved the problem (any threats found in the various scans were removed, but that had no effect on the current problem). I suspect, from the scan results, that the problem is not malware. I think there may be a corrupt or damaged file or process somewhere in the system. The OS is factory installed, and the laptop did not come with a Windows disk. What's the best way to clean this up
