Why Is Computer Not Working In Safe Mode
May 31, 2012why is my PC not working all mode
View 2 Replieswhy is my PC not working all mode
View 2 Replieswindow 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
View 1 Replies View RelatedI can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
View 7 Replies View RelatedI seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
View 2 Replies View Relatedcouple of days ago my internet slowed down and now it's pretty much died. I have an ASUS K53E. I'm running chrome with windows 7. I've run a norton scan, uninstalled/ reinstalled norton. Everything works fine in safe mode.
View 1 Replies View Relatedbefore the blue screen i had windows 7.
I have a sony vaio laptop. After having a blue screen appeared and computer turning off by itself i cant login to safe mode. I was able to go to f2 bios but not to the advance booting options f8 or shift+f8.
so after tuning off i tried turning on the laptop. sony logo appeared and then theres was a black screen with a small white line blinking and that was the farthest it could go. So i tried formatting and installing a fresh copy of windows 8 and for my surprise I was able to logon into windows again.
The problem now is, that im still not being able to login into safe mode or adavance booting options.is there a way to do a complete hardware diagnosis?
In SAFE MODE, keyboard and mouse (all PS/2) not working.How to manually assign IRQ for COM1 in Safe Mode?How to remove COM1 from Windows completely?
View 2 Replies View RelatedMy friends PC restarts automatically no BOD or any error message that usually comes after the restarts.
Motherboard: Gigabyte 945 GCMX S2 on Windows 7
I check to replace RAM but same thing. One more interesting thing is that it works fine in Safe mode. restarts time is random.
i have problem with my laptop. it always restart when i on it in the normal windows. but if i on in safe mode, the restart will not happen...
if i on it in normal windows, it can be stand only 2 or 3 minutes. one thing that i notice that in my problem is when i turn on my laptop in normal windows and i not use it like i open my browser or open folder, it will not be restart and we will look it like no problem.
but if i start use it like open browser or open folder, my laptop will restart. for your information, my laptop has a little heat but not very strong.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Celeron(R) M CPU 410 @ 1.46GHz, x86 Family 6 Model 14 Stepping 8
[Code].....
I have an L505D-GS6000 Toshiba Satellite with Windows 7. At the moment, I can only go on my lap top in safe mode. When I try to log onto it normally, it starts loading the things on my desktop and then freezes. I know that in safe mode, you are limited to what you can do, so I'm not sure if having no sound also is because of the safe mode or if it's related to what ever the problem is with the lap top as a whole.I have talked to a few people about it, some say I may have a virus that has frozen my drivers.I have Malawarebytes, and have run a full scan and nothing came up. I also am no able to download anything.
View 14 Replies View RelatedI have this windows 7 for year and not have problems until now. Now the windows doesn't respond when it works and only the mouse fan move, but with cursor in position of loading. ctrl+alt+delete doesn't work and only shut down the computer can work. I tried use "safe mode" and the sound driver didn't work. I succeeded to do recovery two times but the problem repeat on itself. I tried to scan for virus but there wasn't. How can I handle it?
View 4 Replies View RelatedMy computer will only start in safe mode. When booting normally, the computer freezes at login.
View 11 Replies View Relatedmy Sony VAIO VGC-LA3 seems to have a problem. I recently did a clean install of windows 7, which was no problem and completely drama free. I then sourced all the relevant drivers and installed a few essential programs and updates to get the machine up and running. I was then prompted into doing a restart so the updates could be installed. Upon restart the machine came on, start up options flashed up as normal and proceeded to the windows loading screen. The screen then goes black and shows no sign of coming back on until I bet the 'blue screen of death' 5 minutes later. The HDD and WIFI light do flash during these 5 mins. Then the computer restarts after the BSOD and says that Windows wasn�t shut down correctly etc� I chose to start normally and the same thing happens again. I then chose to start in Safe Mode With Networking and the machine would go through the start up procedure as expected, loading the OS with only basic drivers. I have tried wiping the hard drive and doing another installation of 7, with no success, and have also tried Vista, with the same result.
View 7 Replies View RelatedI'm a complete novice at thisMy computer will not start-up normallyOr in safe mode, Failure ID 6CQ708-4RH6B4-XD03HF-60Q003 When I run hard disc testIt stops loading when it gets to Windowssystem 32driversNISx641008030.006SYMEFA64.sys
View 1 Replies View RelatedWhenever I would boot my computer, the splash screen would hang and would not move onto the password screen. I would then have to restart my computer and activate safe mode so I can access system restore, find a restore point and go back to how it was earlier. I know for a fact that the Windows updates have been the key problem here, so I always backtrack a few system restores before that.
Now, the problem has come back and my restore points are ALL GONE. As I'm typing this, I am running SFC /SCANNOW, and here is the message that comes up at the end:
WINDOWS RESOURCE PROTECTION DID NOT FIND ANY INTEGRITY VIOLATIONS.
Also, I cannot access system protection. On the System page, there are only three options, when there should be four. What is going on here? If I try to restart my computer without safe mode, it will just hang again.
I have recently run into some issues on my machine that runs Windows 7. I can't run Windows Media Player; it just says the file name and then "Server Execution Failed".
I was advised to go into safe mode and type a command into cmd. However, safe mode would not work. At first I thought it was an F8 problem, so I was advised to go into msconfig > boot and change the system to boot into safe mode. I did that to find that safe mode gets into the driver loading screen and stops at windowssystem32driversClassPnP.sys and seems to load.
It shows the cursor, but then disappears and my computer reboots. However, since my computer is set to load into safe mode, it constantly tries to log into safe mode, which doesn't seem to work, so it just restarts, tries to go into safe mode, but can't, so it restarts again, going through the process again and again.
I have tried pressing "Delete" key at the beginning of boot up, but it does not show any thing else I can boot from. When I do get the F8 thing working, I select "Boot Windows Normally" but it just goes straight to the bootup of safemode.
I have an Acer Aspire M3800 that only has the factory restore discs that Acer eRecovery Management has asked me to make when I first bought my computer. I obtained Windows 7 through the "free upgrade" program Acer is running.
when i was using yahoo 7 messenger suddenly that windows does not respond so i was disable to shut down my computer,i just push out battery compartment
View 1 Replies View RelatedAll of a sudden, from just turning it on today, my laptop (a dell inspiron) now only works in what it calls 'safe mode'. This has literally just started, and no amount of turning it off and on again has fixed the problem. When I turn it on it loads up to the windows welcome screen, but instead of loading my desktop the screen goes completely black, sometimes with the mouse still on screen that I can move around. When I force it to shutdown, something in it bleeps loudly. (Note: I don't know if this might be related, but I've been having problems with my screen for a while now where it goes all pink and green, I know this is the wire between the screen and whatever it plugs into being loose, I just haven't gotten it fixed yet, but it's never done this and gone all black before.)
View 2 Replies View RelatedAfter attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
View 1 Replies View RelatedYesterday I left my pc running, and when I came back, found a black screen.Rebooting, I came across some random characters in the POST and also in BIOS, after which, the same black screen. I googled this, removed the video card and the bios and post look normal now( i use the onboard video), but when trying to load windows, the pc reboots.I tried system repair, chkdsk. When trying to boot in safe mode, it loads up to "AtiPcie.sys", then reboots.
View 11 Replies View RelatedI have a Toshiba laptop running Win 7 (64bit). Lately the computer freezes up in less than five minutes if running in normal mode, leaving only hard-boot option. When restarting, I go to "Safe with Networking" mode, and everything seems to run fine, even internet. I have repeatedly run scans from: Malwarebytes; SuperAntiSpyware; SpyBot; Windows Defender; CCleaner; Periform FixCleaner; TDSSKiller, and probably another half dozen. I have reset the Hosts file, and recovered to a reset point established back in December, before the current problems began. Nothing has solved the problem (any threats found in the various scans were removed, but that had no effect on the current problem). I suspect, from the scan results, that the problem is not malware. I think there may be a corrupt or damaged file or process somewhere in the system. The OS is factory installed, and the laptop did not come with a Windows disk. What's the best way to clean this up
View 3 Replies View Relatedmy computer will not boot up normally or in the safet mode after installing Norton Power Eraser. Performed the following actions:1. Attempted to use System Restore, program will run but failed.2. System Repair also failed.3. Performed the following steps from your Forum Dated Feb 2012 (Computer will not boot after using NortonPower Eraser echnician is OH MYa. Diagnose Blue Screen Error 0x0000007b (0xFFFFFF88009A98E8, 0xFFFFFFFFC000000D, 0x0000000000000000, 0x0000000000000000.Performed a Chkdsk/r from Recovery Environment, no problems detected.Can only boot it up after reseting "/NOEXECUTE=OPTIN" all the time.
View 9 Replies View Relatedin what way it is possible to check, whether the computer was started in safe mode.
View 1 Replies View RelatedI have a Dell Studio XPS8100 running with Windows7 Home Premium Service Pack1, 64-bit OS.When I purchased it I also had Dell put in a Tv card (Hauppauge WinTv HVR-1250) figuring I might be able to watch some of the Tv Channels from the area where my family lives.Anyway here are the list of issues I have been having over the past couple years. The first issue I noticed was when I went into Windows Media Center and clicked the Internet TV feature or the program, the Windows Media Center program would shut down. So I called Dell and they worked on the issue for a couple of sessions that included numerous hours of my time and might I add the difficulties in understanding the tech, but the end result was that the issue was never fixed and so I just gave up on the tv feature all together and started using the computer to do Cad drawings which is the main reason I had purchased the unit.
Over the next couple of years working with the unit I noticed that once in a while Explorer would stop working and restart itself once in a while, Then the other day I installed a new Cad program and the program would starts itself to the part of the program where I would start using it and then just dissapears of the screen.In the same fashion that Media Center did. So in trying to figure out if I could fix the issue, thinking that perhaps another program might be conflicting with the Cad program, I decided to start the computer in Safe Mode, when I do that the computer boots in safe mode to the Log in window where I have to put my Administrator password and then automaticly restarts itself in Normal mode without letting me put any of my password in.Other things I did was add the title of my cad program to the allow list of the firewall, I have scanned the whole system five times with different Malware and virus program with no virus or infections found.
My computer does not go past the "starting windows" logo on my computer. When it does the cursor just stays there loading. On top of that im not even able to do a system restore because of some type of error. Everything works fine on Safe Mode, and I really dont think its a virus.
View 4 Replies View RelatedI have tried to start my laptop normally and in safe mode and it send me to start upi repair, this runs for two days and then I get an error message about no communications code 0xc00000e9
View 2 Replies View RelatedMy computer freezes and only works in safe mode.
View 1 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4094 Mb
Graphics Card: NVIDIA GeForce GT 220, 1024 Mb
Hard Drives: C: Total - 702610 MB, Free - 547651 MB; D: Total - 12690 MB, Free - 2255 MB;
Motherboard: MSI, Boston
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
My computer keeps freezing seconds after it logs in. I am not sure what to do and would like some help please. I also ran hijack this and got this result.
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:08:09 PM, on 7/16/2012
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16447)
Boot mode: Safe mode with network support
[code]....
computer freezes after startup, safe mode works? Moved to Virus & Other Malware
View 2 Replies View RelatedI forgot to plug in my computer and the battery died. When I tried turning it back on, it takes me directly to:
"Startup Repair - Your computer was unable to start. Startup Repair is checking your system for problems. If problems are found, start up repair will fix them automatically. Your computer might restart several times during this process. No changes will be made to your personal files or information. This might take several minutes."
Followed by a loading bar that says searching for problems. After leaving this on for a while it gives the system restore option, however this just takes me back to the previous screen. I cannot cancel the Start up repair and I can't access safemode. After searching for over an hour the only solution I've found so far is reinstall the OS, however my computer did not come with the OS disc and I have school related files on the computer that I can't lose.
I am using a Toshiba Satellite A505-S6981 T6600 That's 9 months old with windows 7, Specs (To my limited knowledge) say:
C2D 56600, 4GB DDR3
16", 400 GB HD, DVDRW
Windows 7 P 64 Bit, 80211bgn
I left my laptop running for a while when i left the room. When I came back it had frozen, I hadn't been doing anything untoward, I had been running a few programs at once, just like firefox and word. Anyway I had to turn it off with the power button. Then when I tried turning it back on I was able to log in but there was no desktop, just a black screen, same thing when I used safe mode. Now whenever I turn it on it goes to a disc check and when it gets to a certain number it says its unreadable and safe search just plain doesn't work. I'm gonna lose all my files. So is there anyway I could do a restore to factory settings (restoring to another time also didn't work)
View 2 Replies View Related