I have tried to start my laptop normally and in safe mode and it send me to start upi repair, this runs for two days and then I get an error message about no communications code 0xc00000e9
View 2 RepliesMy computer won't startup in normal or safe mode and I was told my windows 7 may be corrupt. I am trying to reinstall it, but I'm not sure how. I place the disc in the drive and rebooted the computer but it didn't work. The system repairs won't work, nor will system restore. Is there a command prompt or anything?
Desktop
Ibuypower WA 910i
64-bit
My computer will only start in safe mode. When booting normally, the computer freezes at login.
View 11 Replies View RelatedI'm a complete novice at thisMy computer will not start-up normallyOr in safe mode, Failure ID 6CQ708-4RH6B4-XD03HF-60Q003 When I run hard disc testIt stops loading when it gets to Windowssystem 32driversNISx641008030.006SYMEFA64.sys
View 1 Replies View RelatedMy computer does not go past the "starting windows" logo on my computer. When it does the cursor just stays there loading. On top of that im not even able to do a system restore because of some type of error. Everything works fine on Safe Mode, and I really dont think its a virus.
View 4 Replies View RelatedI forgot to plug in my computer and the battery died. When I tried turning it back on, it takes me directly to:
"Startup Repair - Your computer was unable to start. Startup Repair is checking your system for problems. If problems are found, start up repair will fix them automatically. Your computer might restart several times during this process. No changes will be made to your personal files or information. This might take several minutes."
Followed by a loading bar that says searching for problems. After leaving this on for a while it gives the system restore option, however this just takes me back to the previous screen. I cannot cancel the Start up repair and I can't access safemode. After searching for over an hour the only solution I've found so far is reinstall the OS, however my computer did not come with the OS disc and I have school related files on the computer that I can't lose.
I am using a Toshiba Satellite A505-S6981 T6600 That's 9 months old with windows 7, Specs (To my limited knowledge) say:
C2D 56600, 4GB DDR3
16", 400 GB HD, DVDRW
Windows 7 P 64 Bit, 80211bgn
My computer does not go past the "starting windows" logo on my computer. When it does the cursor just stays there loading. On top of that im not even able to do a system restore because of some type of error. Everything works fine on Safe Mode, and I really dont think its a virus.
View 3 Replies View RelatedLike the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.
View 2 Replies View RelatedI am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies View RelatedI have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
View 44 Replies View Relatedi bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
View 4 Replies View Relatedi cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
View 1 Replies View Relatedthis might seem like a really dumb question but i've tried pressing f8 repeatedly on asus screen to try and start windows in safe mode but it never works.
View 4 Replies View RelatedGot a nice comp about a year ago off craigslist and havent had a single issue with it until now. I am not your typical "oh-you-mean-I-have-to-plug-it-in-to-work" end user, but neither am I an "expert". Especially in this case I'm in way over my head; a few days ago I went to slave up a buddy's HD. The mistake here was that I had always worked with ATA, not SATA. Yes, I was a temporary idiot, and no, I don't remember WHAT I was thinking. Whatever was or wasn't going through my head, I hooked up the second drive to the second clip on the (belt?). Everything started as usual until the windows loading bar; after the bar, I got a black screen, and then the computer shut itself off.On attempt #2 to startup (and removing the second hard drive), before the loading bar, I get a prompt for "Windows startup repair" or "Start windows normally". Option #1 results in "windows is loading files" for about 10 seconds, then black screen, then computer shuts itself off again. Option #2 just results in windows loading bar, black screen, then computer shuts itself off.
Error Code: 4400:11A
Msg: SCSI_0-000_DISK_GENERIC-_SD/MMC - Target not ready
After running diagnostics specifically towards this, it consistently fails the Confidence Test and consistently passes the Device Self Test (the Read Test and Verify Test options are greyed out).I've defaulted everything in the BIOS (although it says my HD is in a Raid setting, which as I understand it is for synching multiple HDs together, but the only option to change it to is ATA, which I know my HD is not). I have tried bare-bonesing the startup as well, but running only microsoft stuff I still get the same results as above, and I dont know enough to risk turning off anymore startup stuff.
The most confusing part of all is when I broke down and just decided to reformat the drive and start from scratch. Again, I could only boot from the Windows 7 CD in safe mode, and while in there I reformatted the main drive (there are 3 partitions; OEM, Recovery, and the Main). I have done this process multiple times, but the only thing I get even after reformatting the drive is more OS to choose from when starting the comp.As for computer stats I dont remember everything off the top of my head, and can't get past the setup screen now on windows, so I dont know how to check. From the dell website comes this mess: Dell Technical Support Home Page / Dell Troubleshooting Search Other than that what I can remember is:8gig ram, quadcore (cant remember gHZ), 1mb ATI Radeon vid card, Windows 7 Home Premium 64-bit. Sorry if this isn't enough, if anyone knows of a way I can check for further info I'll be happy to oblige.
Why am I getting blue screen? Loading files, then nothin
View 1 Replies View RelatedDoes anyone know how to start Windows 7 ultimate in safe mode
View 2 Replies View RelatedYesterday, I added malware bytes protection and also last night installed avg 2012. Ran scans, everything was moving faster. Shut down last night...and this morning windows will not come on in normal or safe mode. When try to start in safe mode it says STOP: c0000135 program cannot start %hs is missing. On another post with similar code it had a link to put on usb drive and to put in infected laptop and restart with f8. When I did that it said no bootable partition in table. When usb is not in it just goes back to stop message. I have a dell inspiron core i3 (I don't know if that matters). I have tried running restore to previous time and it did not work. when i click on repair it goes to the launch window or start in safe mode option?
View 2 Replies View RelatedAt any rate, I just got myself a new ASUS laptop running windows 7 64-bit. Now I had no problems with it setting up Firefox, installing antivirus or installing the host of windows updates.What did happen is that when I tried to reboot (for the second time, first time wasn't a problem) it gave me a screen called "configuring windows features". Now I at this point I cried out a few curses and went to have something to eat.When I returned, half an hour later, the progress was still at 15%, the same as when I left it. Obviously having frozen up, I gave it a quick search. People with similar problems with windows updates reccomended forcing a powerdown despite the warning.After waiting for another half hour I did just that. Now Windows is refusing to start at all. It just sits at the "starting Windows" screen. Safe mode gets stuck on the screen with the list of drivers and restoration tools just gives me a black screen.
View 8 Replies View RelatedI cannot start my windows 7 in safe more or use recovery function. Problem happened after windows 7 update, then after restart windows defender asked me to restart again, and then blue screen or auto restart forever. I would like to disable or uninstall windows defender as i can access the command prompt but I can't find how to do? How to uninstall windows latest update with command prompt?
View 2 Replies View RelatedToshiba c655d-s5130 windows wont load. Blue screen / black screen all the time. I have no disks.
View 2 Replies View RelatedI had a BSOD problem launching Borderlands 2, and some other games too. My Video Card drivers are up to date and i still have BSOD. I got blue screen once more, and my pc restarted. Now I can't even start my windows, I get some black screen before windows 7 logo appears and I can't even start my windows in safe mode nor can I boot from a CD/DVD.
My system specs:
Processor: AMD FX-8120
Graphics Card: AMD Radeon HD 6850
RAM: 8GB 1866mhz
HDD: 500GB
I recently somehow got a nasty virus into my lappy. It was extremely weird since I just bought a new anti-virus (Norton, to be exact) and my PC became super slow. I recognized signs of viruses and I decided to wipe the PC clean. My friend gave two Windows 7 DVDs. However, even after making DVD the first boot order at BIOS it just doesn't work. My DVD rom makes really nasty sounds and it waits on a black screen for a bit and then it shows me to choose safe mode or start normally.
Basically, my PC has always read DVDs (logo on it confirms it). Also, Rom itself isn't broken, other discs like the Norton one work fine. Since the DVDs my friend gave me were DVD R- and DVD RW. Later, I got yet another disc which was DVD R+ but it STILL didn't work. My PC doesn't recognize the DVDs even normally, through My Computer. Did the viruses ruin my drivers or something? My rom always read DVDs but why make weird noises now?
Loading up the computer and it had frozen at windows start up, so I switched off tried the starting up using safe mode, managed to get onto safe mode and then it froze, so I then tried repair my computer and it failed. So now I'm stuck.
View 14 Replies View RelatedSo i just purchased a new computer to run World of Warcraft xDThis morning my computer wasnt working as intended. I booted it up and it went through the usual stuff, the winds logo popped up, then suddenly the screen went black and i got the message "out of range" on my monitor.I restarted the computer and the same happened again, after the windows logo, the screen goes blank.I then ran it in safe mode + networking and everything was fine !I tried "repair my computer" on the start up menu, but the PC still wouldnt run in normal mode.I tried configuring my PC to an earlier point in time, but the PC still wouldnt run in normal mode .I tried uninstalling my drivers (within safe mode) and it still wouldnt boot up in normal mode.
Could it be the monitor resolution? if so whyyyyy? it's been working fine for two weeks.Also yesterday we had about 5 random power cuts? could this have caused the problem?Everything works fine in safe mode so i think it's not a hardware problem, but normal mode just gets me to the windows logo loading screen then the monitor goes black
Loading files hangs up on atipci64.says
I am having so much trouble getting my system back to working
i switched on my laptop today i could only start in safe mode i since read a few threads on here leading me to create a recovery disc but it wouldnt let me do that eitheri kept getting error message : unspecified error (0x80004005)i did the CMD prompt - then - net user administrator /active:yeslogged back in on administrator account but still got same error messagenow im really lost,[CODE]
View 9 Replies View RelatedI know this topic is similar to a number of others that have been posted before but i have not been able to successfully apply any of the solutions to the posts i have found addressing this issue.
It began happening after downloading an .mkv file. initially exp crashed and asked to restart. Did so and all good apart from occasional crashing and restarting.
Now turned lap-top on again and it won't even finish restarting before crashing, and this time there is no escaping the loop. Tried a restore from before the file was there but for some reason this didn't make any difference!
Currently in safe mode, have disabled all non ms services and all start-up items using msconfig and restarted normally - didn't change anything.
Ran CCleaner and cleaned out temp files and registry and still no change.
After found this site downloaded and ran SF diag tool as instructed in FAQ and copied all 8 files except Minidump folder which is apparently empty. Remaining files attached.
One person has suggested repairing using Windows Installer dvd this doesn't help me as OS was pre-installed and I don't have a DVD.
My little brother was away for 3 months and forgot his password. He has no adminastrative password or any other kind of backup. The only way was to restart in Safe Mode and the next option is to click the Start button on the log in page but there is no button. Is there any other way to fix this...
View 1 Replies View RelatedI can only boot up in safe mode Ive tried loading windows 7 disc to repair wont work in safe mode,did restore no luck,did panda safe disk reload did virus scan clean,did dskchk,tried start windows normal from f8 menu,last known good config etc.
View 3 Replies View RelatedI have a Gateway desktop running windows 7 -64. While the system was powered on with no activity, it shut down and started to re-boot. Now every time I try to start the system it gives the message 'Reboot & select proper boot device or insert boot media and select'. From this screen you can't do anything. I'm not able to start in safe-mode either. I can get F12 to work to get to boot manager.
View 1 Replies View RelatedWindows 7 Home Premium, Emachines E725 laptop.I just got through dealing with an infection. Details in this thread:[URL] restarted and F8ed my way to Advanced Boot Options and selected Safe Mode with networking. It started up normally, got to the Users page, I selected my profile, typed in my password and the puter suddenly restarted. Huh. So I tried again and typed faster. The puter at first began to start up in safe mode then suddenly restarted. I tried one more time but this time when it got to the Profiles page I left it alone and counted. 12 seconds later it suddenly restarted by itself. So, I can not enter Safe Mode.The infection has been removed and MSE shows that it is clear. Correlation is not causation so I can not say that the Safe Mode problem is related to the infection, and I can not even remember ever starting this particular machine in Safe Mode since I bought it new.
View 14 Replies View Related