Computer Crashed, Windows 7 Will Not Load?
Dec 18, 2011
I am no expert when it comes to computers so please bear with me. My Acer Aspire laptop crashed on me. It uses Windows 7. Start up repair does not work. I have a set of Windows 7 disks, 32 bit and 64 bit. Not too sure which one I should have used so I tried both with the same results. I have tried to re-install Windows 7 again as well as repairing the Windows 7 which is already on my computer with the disks with no luck. When re-installing it gets stuck at 'Setup is starting'. It stays like that for hours. When I try the repair option it gets stuck at 'checking for operating system' or something to that effect, also for hours on end
View 9 Replies
ADVERTISEMENT
Dec 28, 2011
Tonight right before bed and about 30 seconds before I was going to hit the shut down command on my laptop (specs below) my computer did a BSOD with a failed physical memory dump and shut down. Now it won't load and the recovery won't attempt any more. Since the BSOD it has a click and single beep. I have a second hard drive in the computer but I can't even access that either. I can enter setup menu and multi boot menu. If I let it sit for 20 minutes to load it brings up a notice saying my windows 7 isn't genuine and loads a factory set up. It is genuine, came from toshiba and I havent had a problem till now.
Spec I know:
Toshiba qosmio x500
Windows 7 professional
Intel I-7
Nvidia video ( not positive on model)
2 hdd
I don't know what's wrong but I need my laptop, Can I recover? Is it a driver issue? Hard ware? What?
View 18 Replies
View Related
Nov 26, 2011
I just got my first computer in place i installed win 7 on it and everything went smooth, but then i realized i had by misstake installed the 32bit version..so i checked the SSD, which is the only kind of storage drive i have right now, and for some reason the installation had made an partition called system drive or something on 100mb. the stupid thing is that it was nothing on it?? windows was still on C:? anyway , after many minutes of thinking i decided to just reinstall windows over the old one and so i did. it runned smooth and went perfect, i checked the preferences of my computer and as planned i now had the 64 bit version but 30Gb was lost on my SSD? i discovered that the old windows was still there, in the windows.old folder... i didnt think about much so i'd just pressed delete...
the crash: loud noise came from the computer and it shut off, now i cant get it to work!!!!!when i start it all the lights starts and the fans runs but nohting moreand how do i format the ssd so i can use it when i've fixed the computer!specs:Motherboard: MK Gigabyte Z68X-UD3H Socket 1155, Z68 CPU:Core i5 2500K Graphic: GK EVGA GeForce GTX 570 SC RAM:Corsair 8GB (KIT) DDR3 1600MHz/VENG. Drive:SSD 120GB Corsair SATA 2.5", Force 3 Series Cooler:Cooler Master Hyper 212 Plus CPU cooler AMD/Intel PSU: XFX XPS-750W BE ATX 12V EPS 12V
View 7 Replies
View Related
Sep 12, 2012
I am writing this windows safe mode.Cannot get computer to boot in reg mode. Sat for 40 minutes, with message "please wait while windows configures"Am running windows 7, 64 bit home, Dell Inspiron 570 It started yesterday when it downloaded updates for Windows. After the restart, the computer screen looked strange and could not open any programs. Went to "start" and re-booted, same thing happened again. I again went to start, this time it came up with 2 errors. (wish I had wrote them down) but said something about windows cannot find such and such. (sorry) Anyway, clicked on the "X" and windows came up again, but nothing would open. Had to hard boot as the start button would not even work.Rebooted into safe mode and have tried to return to a previous restore point. Seems I don't have any. So can't do that. I did go go to the recent installed windows updates and deleted them. But will not let me change the settings as in: Don't install updates automatically. I don't know if it is trying to install those over and over again. I tried to get it to come up again with the errors, but no such luck, it just sits with the blue welcome screen, then the "please wait"
View 9 Replies
View Related
Feb 25, 2011
When I installed Windows Live Essentials 2011 on my new Compaq Presario CQ5621F with Windows 7, it seemed to load fine. I tried to access the internet and got no connection. When I rebooted my computer it suggested that I restore to an earlier time. Upon doing so it works fine again.
View 3 Replies
View Related
Jul 9, 2012
I recently bought a new power supply, along with more ram because I was already ordering the power supply. When the package came and I set everything up in the computer, the PC turned on and everything was fine. I started to play a game with my friend and the computer just turned off. No error message, nothing. I believe the computer overheated, but I could be completely wrong. Now, when I start my computer up, it gets to the Launch System Repair (Recommended) or Start Windows Normally. If I select one of them, it will get into the 'Starting Windows' screen with the orbs, and then the monitor will just go blank. The computer still runs in the background, but my monitor just is blank. It is not the RAM (I switched and went to my old RAM) And I also cannot boot into safe mode, or anything of the sort, as the same thing happens. And I cannot boot from a CD (Tried with a windows 7 repair disc and computer goes blank again)
View 9 Replies
View Related
Feb 9, 2013
computer crashed have windows 7 OEM disk and half the product key . How can i get the product key?
View 3 Replies
View Related
Feb 16, 2012
playing around with my new computer, i was trying to record a sound playing on Internet with the microphone using the sound recorder. after about 10 seconds, the whole system froze - i couldn't even move the mouse cursor and had to unplug the computer and re-boot. what's the problem and is there an easy fix? below is a screen shot of my system specs, if that's any help.
View 1 Replies
View Related
Feb 17, 2012
as the title says, I was just talking with some friends on skype and then the computer froze like when it's going to give you a BSOD but instead of that it just froze, so I turned it off and now the computer won't even show BIOS menu. RAMs are fine, they were tested by the retailers for 48 hours with memtest and tested by me for 24 hours (when the computer used to work).So to give you a clearly idea of what's happening, I press the power on button, there's a beep and the computer starts, right? my pc powers up but it never beeps, the CD/DVD reader works, the processor starts up, but it's just stuck there. I checked on the motherboard's user guide and it doesn't say anything about "not beeping"
View 9 Replies
View Related
Feb 26, 2012
Computer threw out a bunch of weird language and then said crash and shut down. Now it doesn't really boot or reboot. I have to pull the battery to get it to restart and I get the HP logo when I put the battery back in and it takes me to a Windows Errory Recovery screen with two options: Launch Repair or Launch normally. Neither one of them does anything. I just get the blue screen.
I've tried the f8 key and the f10 key and can't seem to get to any other screen. I put the restore disk into the CD rom drive and I don't think it's accessing it at all.
It is an HP Pavilion dv7-4087cl with an Intel Core i5-430M processor and its running Windows 7 Home Premium OA 64 bit.
View 1 Replies
View Related
Jan 9, 2012
My computer crashed today and I can't get it to boot up. I can hit ESC during startup and get the menu. I ran all the tests and everything passed. I am trying to create a Windows 7 disk so I can boot it from there since my computer won't start up. I'm not sure where I can download this.
View 7 Replies
View Related
Jul 31, 2012
i was on [URL] and found win8 login for 7 i replace authui.dll in system32 and sysWOW64 also replased basebrd.dll
then tried it out by switching user i got black screen then rebooted and i still got a black screen
then i booted into startup repair and then it gave me an error now i have startup repair infinite loop
View 6 Replies
View Related
Jun 16, 2011
My computer crashed and I lost all my Sims data. I tried to reinstall with the original discs but when I got to the 20 digit code on the box, it said it was invalid (probably because it belonged to me). I had installed Sims 3, Expansion packs World Adventures, and Ambitions. I recently bought Late Night, but my computer crashed before I downloaded it. How can I reinstall these? Will any of the work I did on each one be restored, or will I need to start in the beginning of each one?
View 1 Replies
View Related
Feb 9, 2012
My computer just crashed due to the reason "IRQL less than or equal" or something along those lines, because it was only up for a second before my computer crashed. Minidump file is included in case anyone can help me. I think it might have to do with my ram, because ever since i bought it (around 2 months ago) i have crashed 4 times.
View 1 Replies
View Related
Jan 29, 2012
I left my laptop running for a while when i left the room. When I came back it had frozen, I hadn't been doing anything untoward, I had been running a few programs at once, just like firefox and word. Anyway I had to turn it off with the power button. Then when I tried turning it back on I was able to log in but there was no desktop, just a black screen, same thing when I used safe mode. Now whenever I turn it on it goes to a disc check and when it gets to a certain number it says its unreadable and safe search just plain doesn't work. I'm gonna lose all my files. So is there anyway I could do a restore to factory settings (restoring to another time also didn't work)
View 2 Replies
View Related
Nov 25, 2011
Something really strange happened one day when I ran one of my games. Well, The game crashed several time and when I went to open it in again, my documents wouldn't open! I went to "my computer" clicked it and still nothing happened. Whenever I click "my documents" the document screen just goes off to the side of my screen and nothing happens, same problem when I try to open "my computer". I have run scans with Norton and Malware Bytes but it cannot find any virus, my computer seems clean at the moment.
View 9 Replies
View Related
Jun 21, 2012
I have a two year old Dell PC with Windows 7. I got a virus in my computer that by phone and computer takeover Norton located in my MBR. When they cleaned it my computer will no longer boot up. Norton worked with me for three days on the problem but we were unable to fix the computer. I followed other web sites and repaired my MBR but it still will not boot up. I tried System Repair, Check point, Image, and Dell system restore and all failed. I have tried to use the Windows install CD and all I get is a black screen with a flashing cursor and then after 3 minutes the compute attempts to boot again and fails. I tried everything to try and wipe the drive from C prompt and it will not let me. I have very weak computer skills but I can follow directions and I have wiped a previous computer I owned. (I confirmed that my CD drive is working) I also should mention I have a second hard drive on my computer that I backed everything up to.
View 1 Replies
View Related
Nov 6, 2012
I had a bit of bad luck today and my laptop fell on the ground and cracked the case. I checked to make sure everything was functioning and running alright and everything seemed fine, so i proceeded to run solidworks and work on a project and again everything was working fine for about 40 minutes than blue screen popped up and computer tried to restart. When it started backup a screen popped up saying to run startup repair. Ran the repair and when a command window popped up i get a white screen saying error in big red font. So i restarted again and tried to start windows normally it began starting up but switched to start up repair automatically and same thing while start up repair was beggining.to stop happening preferably without re formatting and losing files as i have some really large solidworks files that i need for a project and dont have time to re draw
View 1 Replies
View Related
Apr 19, 2012
I can run World of Warcraft and Battlefield 3 at max settings and NOTHING happens. Runs like a dream. However if I play any over games such as Skyrim or the Witcher 2 my computer will completely crash to a black screen and then a weird buzzing noise which lasts 1-2 seconds. It will then require a hard reset.
This crash only happens when I play video games and it seems adjusting the settings doesn't seem to change anything. High or low settings it will still crash. I have ruled out Temperature I think. At it's hottest my GPU will be at about 55C.
My Specs- Operating System:
Windows 2.6.1.7601 (Service Pack 1)
CPU Type:
Intel® Coreā¢ i7 CPU 960 @ 3.20GHz
CPU Speed:
3.2 GHz
System Memory:
7.99 GB
Video Card Model:
NVIDIA GeForce GTX 580
Video Card Memory:
3.97 GB
View 19 Replies
View Related
Jun 25, 2012
My windows 7 computer has crashed while using Windows Explorer - or most any file searches since I bought it in late 2009. It has all the upgrades and modifications from Microsoft and Dell, and continues to crash.If I open Windows Explorer, a Browser or any other program with a "File/open" capability, merely while scrolling down the directory listing, it will crash and worse, it will often take all the other opened programs on my screen with it.I have learned that re-trying two or three times somehow solves the program and I can get to what I'm looking for. Also, I have an old graphics program (Paint Shop Pro 5.1) which seems immune to this program. I'm running it under full compatibility mode, and I don't have this problem with it.I have contacted Microsoft so many times - to no avail - that I finally dumped the computer and bought an Apple. But we all know that Apple has it's own problems, so I jump over to the Win 7 machine occasionally. So I have the two computer sitting here side-by-side. Like any strangers, they don't speak to each other, and I'm the third party who needs the friendship of both, individually. I have pretty much decided, however, this Windows 7 model will be my last PC unless someone totally brilliant comes up with a "why this is happening" saving grace.
View 1 Replies
View Related
Jan 6, 2013
The other day I was on my laptop computer and it froze. I had to hard shut it down (like I have done in the past) and when I tried to turn it back on, it wouldn't go past the "starting windows" screen. I have pressed F8 and F10 when I turned it back on and tried everything that it gives me the option for. It won't allow me to go into safe mode. It ends up doing the same thing as when I just try turning on the computer normally, doesn't go past the starting windows screen. I have had this computer for 3 years and have never had an issue with it until now. I don't even know if I still have the discs still or not (don't believe I do)
View 4 Replies
View Related
Jan 2, 2012
My computer was freezing up after i load up to my desktop .. than it told me my hard drive was no good. The system had me to make back up disks. I got a new hard drive. The new hard drive is the type that allow us to transfer operating sytstem and files to new hard drive from the old one. I tried but im not sure if it hook up right. So now i have two hard drives.. i even switch it up so it boot from the new one and not the old and went back and switch it again back to the old one. This is where I'm at now.. the computer won't load to the startup screen and had me to do recovery but it not taking it. I assume i need a new operating system for the new hard and do a clean install.. but not having the installation cd with the drivers is the reason why im stuck atm. I dont have no problem erasing what there on both hard drive and starting over. The problem atm is not having the installation cd with the drivers.
View 2 Replies
View Related
Jan 25, 2012
I recently updated my PC and just bougth some different gear, for some reason it just refuses to boot. What happens is when I get to the windows logo loading screen my pc just freezes and reboots. This kept happening so I bought a new HDD and still the same, checked the harddisk to be sure on another pc. Also I recently bought 8 GB DDR3 ram, a P63 B3 Revision Motherboard, I2500K intel core CPU, crossfire with 2x GeForce 9800 GT.
View 8 Replies
View Related
Mar 27, 2012
So I recently upgraded my motherboard, RAM, and CPU. After doing some quick adjustments in the BIOS, I attempted to load into Windows to make sure everything was correct. Upon the Windows loading up, the logo freezes for a second, a BSOD appears (which I cannot read as it disappears within a fraction of a second) and the computer restarts.I've already gone through a couple of passes using Memtest without any errors, so I think the RAM can be ruled out. I was hoping I could get advice on how to prevent the computer from restarting so I can see the BSOD and further provide information depending on the error.
View 1 Replies
View Related
Mar 16, 2012
I upgraded my computer to windows 7 32 bit, went out and bought the 64 bit full version but cant get it to load, what do I need to do?
View 2 Replies
View Related
Oct 28, 2012
A few months back, I reinstalled windows after updating my bios.I screwed things up pretty badly because instead of just setting the Bios options to recognize my RAID array and though there was some bigger issue at play an ended up reinstalling windows before I figured it out. Anyway, everything worked fine for a few months, but then this not genuine box started appearing and disappearing in the bottom corner. It does go away, and I am able to install updates, so I think it's just an error with my bios as I saw in another thread, but I want to make sure before I touch anything. I ran the diagnostic report a few minutes back when the logo was down there (although it's since gone away again). [code]
View 1 Replies
View Related
Dec 20, 2011
I'm not sure of the system specs of the computer in question.I bought it cheap off of a friend and he's doesn't remember the specs and I can't get into it to check them.When I start up the computer it loads with a new loadup screen (did not happen till after the problems started). The screen says Asus Motherboard A8N-SLI Deluxe. It then goes to a screen that shows PCI device listing.I'm not sure what it all is for.At the bottom it says "A disk read error has occurred" "Press Ctrl+Alt+Del to restart.Occasionally it skips this screen and instead goes to the windows 7 Splash screen, but regardless of which it goes to I can't do anything else except restart the computer.When I press F8, F10 or F11 it goes to either RAID Utility or Setup Utility and then I can't get any further with it without restarting and the aforementioned problems continue. I'm fairly certain it's a virus, my computer was showing signs of a virus in the days leading up to this problem but as Malwarebytes failed to show any problems with the computer when I scanned it I ignored the problems. I'm also aware that all I may be able to do is wipe the harddrive, and I'm fine with that.
View 7 Replies
View Related
Jan 9, 2012
I added a second machine to my home network, and want to share files back and forth between machine A and machine B. Both are Windows 7 x64 ultimate. I have a shortcut on B's desktop to a folder located on A called "sharedfolder". When using system B and I click in Asharedfolder, I can then click on a pdf, or an avi, or txt, or whatever, and it loads just as quickly as if the file were on B's hard drive. But if I click on an exe file, it take about 15-20 seconds to load. No prompt, no nothing, it just takes that long. It happens with or without no antivirus running.
View 2 Replies
View Related
Apr 4, 2011
When I start up the computer it loads with a new loadup screen (did not happen till after the problems started). The screen says Asus Motherboard A8N-SLI Deluxe. It then goes to a screen that shows PCI device listing . I'm not sure what it all is for. At the bottom it says "A disk read error has occurred" "Press Ctrl+Alt+Del to restart. Occasionally it skips this screen and instead goes to the windows 7 Splash screen, but regardless of which it goes to I can't do anything else except restart the computer.When I press F8, F10 or F11 it goes to either RAID Utility or Setup Utility and then I can't get any further with it without restarting and the aforementioned problems continue.my computer was showing signs of a virus in the days leading up to this problem but as Malwarebytes failed to show any problems with the computer when I scanned it I ignored the problems. I'm also aware that all I may be able to do is wipe the harddrive, and I'm fine with that.
View 3 Replies
View Related
Apr 20, 2012
could tell me why my processes don't always load right away, and when they finally do, everything is slow, especially the internet.If i reboot and everything loads normally, i have no issues, things are great.
View 2 Replies
View Related
Jul 22, 2012
i plug my iPhone into my computer and nothing happens...doesnt come up in iTunes and nothing appears in My Computer, it works fine on my laptop but not my computer Ive seriously tried everything they say to do on the Apple support site and nothing is working ive checked device manager to see if anything appears when i plug it in and nothing.
View 7 Replies
View Related