i was on [URL] and found win8 login for 7 i replace authui.dll in system32 and sysWOW64 also replased basebrd.dll
then tried it out by switching user i got black screen then rebooted and i still got a black screen
then i booted into startup repair and then it gave me an error now i have startup repair infinite loop
My hard drive crashed and I am replacing it with a new one. Can I just install a fresh copy of windows 7 on acer aspire 4810t without having to do any upgrades? I cannot upgrade until windows 7 is installed first. Is that possible?
View 2 Replies View Relatedplaying around with my new computer, i was trying to record a sound playing on Internet with the microphone using the sound recorder. after about 10 seconds, the whole system froze - i couldn't even move the mouse cursor and had to unplug the computer and re-boot. what's the problem and is there an easy fix? below is a screen shot of my system specs, if that's any help.
View 1 Replies View Relatedas the title says, I was just talking with some friends on skype and then the computer froze like when it's going to give you a BSOD but instead of that it just froze, so I turned it off and now the computer won't even show BIOS menu. RAMs are fine, they were tested by the retailers for 48 hours with memtest and tested by me for 24 hours (when the computer used to work).So to give you a clearly idea of what's happening, I press the power on button, there's a beep and the computer starts, right? my pc powers up but it never beeps, the CD/DVD reader works, the processor starts up, but it's just stuck there. I checked on the motherboard's user guide and it doesn't say anything about "not beeping"
View 9 Replies View RelatedI just got my first computer in place i installed win 7 on it and everything went smooth, but then i realized i had by misstake installed the 32bit version..so i checked the SSD, which is the only kind of storage drive i have right now, and for some reason the installation had made an partition called system drive or something on 100mb. the stupid thing is that it was nothing on it?? windows was still on C:? anyway , after many minutes of thinking i decided to just reinstall windows over the old one and so i did. it runned smooth and went perfect, i checked the preferences of my computer and as planned i now had the 64 bit version but 30Gb was lost on my SSD? i discovered that the old windows was still there, in the windows.old folder... i didnt think about much so i'd just pressed delete...
the crash: loud noise came from the computer and it shut off, now i cant get it to work!!!!!when i start it all the lights starts and the fans runs but nohting moreand how do i format the ssd so i can use it when i've fixed the computer!specs:Motherboard: MK Gigabyte Z68X-UD3H Socket 1155, Z68 CPU:Core i5 2500K Graphic: GK EVGA GeForce GTX 570 SC RAM:Corsair 8GB (KIT) DDR3 1600MHz/VENG. Drive:SSD 120GB Corsair SATA 2.5", Force 3 Series Cooler:Cooler Master Hyper 212 Plus CPU cooler AMD/Intel PSU: XFX XPS-750W BE ATX 12V EPS 12V
Computer threw out a bunch of weird language and then said crash and shut down. Now it doesn't really boot or reboot. I have to pull the battery to get it to restart and I get the HP logo when I put the battery back in and it takes me to a Windows Errory Recovery screen with two options: Launch Repair or Launch normally. Neither one of them does anything. I just get the blue screen.
I've tried the f8 key and the f10 key and can't seem to get to any other screen. I put the restore disk into the CD rom drive and I don't think it's accessing it at all.
It is an HP Pavilion dv7-4087cl with an Intel Core i5-430M processor and its running Windows 7 Home Premium OA 64 bit.
I am no expert when it comes to computers so please bear with me. My Acer Aspire laptop crashed on me. It uses Windows 7. Start up repair does not work. I have a set of Windows 7 disks, 32 bit and 64 bit. Not too sure which one I should have used so I tried both with the same results. I have tried to re-install Windows 7 again as well as repairing the Windows 7 which is already on my computer with the disks with no luck. When re-installing it gets stuck at 'Setup is starting'. It stays like that for hours. When I try the repair option it gets stuck at 'checking for operating system' or something to that effect, also for hours on end
View 9 Replies View RelatedMy computer crashed today and I can't get it to boot up. I can hit ESC during startup and get the menu. I ran all the tests and everything passed. I am trying to create a Windows 7 disk so I can boot it from there since my computer won't start up. I'm not sure where I can download this.
View 7 Replies View RelatedI am writing this windows safe mode.Cannot get computer to boot in reg mode. Sat for 40 minutes, with message "please wait while windows configures"Am running windows 7, 64 bit home, Dell Inspiron 570 It started yesterday when it downloaded updates for Windows. After the restart, the computer screen looked strange and could not open any programs. Went to "start" and re-booted, same thing happened again. I again went to start, this time it came up with 2 errors. (wish I had wrote them down) but said something about windows cannot find such and such. (sorry) Anyway, clicked on the "X" and windows came up again, but nothing would open. Had to hard boot as the start button would not even work.Rebooted into safe mode and have tried to return to a previous restore point. Seems I don't have any. So can't do that. I did go go to the recent installed windows updates and deleted them. But will not let me change the settings as in: Don't install updates automatically. I don't know if it is trying to install those over and over again. I tried to get it to come up again with the errors, but no such luck, it just sits with the blue welcome screen, then the "please wait"
View 9 Replies View RelatedMy computer crashed and I lost all my Sims data. I tried to reinstall with the original discs but when I got to the 20 digit code on the box, it said it was invalid (probably because it belonged to me). I had installed Sims 3, Expansion packs World Adventures, and Ambitions. I recently bought Late Night, but my computer crashed before I downloaded it. How can I reinstall these? Will any of the work I did on each one be restored, or will I need to start in the beginning of each one?
View 1 Replies View RelatedMy computer just crashed due to the reason "IRQL less than or equal" or something along those lines, because it was only up for a second before my computer crashed. Minidump file is included in case anyone can help me. I think it might have to do with my ram, because ever since i bought it (around 2 months ago) i have crashed 4 times.
View 1 Replies View RelatedWhen I installed Windows Live Essentials 2011 on my new Compaq Presario CQ5621F with Windows 7, it seemed to load fine. I tried to access the internet and got no connection. When I rebooted my computer it suggested that I restore to an earlier time. Upon doing so it works fine again.
View 3 Replies View RelatedI left my laptop running for a while when i left the room. When I came back it had frozen, I hadn't been doing anything untoward, I had been running a few programs at once, just like firefox and word. Anyway I had to turn it off with the power button. Then when I tried turning it back on I was able to log in but there was no desktop, just a black screen, same thing when I used safe mode. Now whenever I turn it on it goes to a disc check and when it gets to a certain number it says its unreadable and safe search just plain doesn't work. I'm gonna lose all my files. So is there anyway I could do a restore to factory settings (restoring to another time also didn't work)
View 2 Replies View RelatedI recently bought a new power supply, along with more ram because I was already ordering the power supply. When the package came and I set everything up in the computer, the PC turned on and everything was fine. I started to play a game with my friend and the computer just turned off. No error message, nothing. I believe the computer overheated, but I could be completely wrong. Now, when I start my computer up, it gets to the Launch System Repair (Recommended) or Start Windows Normally. If I select one of them, it will get into the 'Starting Windows' screen with the orbs, and then the monitor will just go blank. The computer still runs in the background, but my monitor just is blank. It is not the RAM (I switched and went to my old RAM) And I also cannot boot into safe mode, or anything of the sort, as the same thing happens. And I cannot boot from a CD (Tried with a windows 7 repair disc and computer goes blank again)
View 9 Replies View RelatedSomething really strange happened one day when I ran one of my games. Well, The game crashed several time and when I went to open it in again, my documents wouldn't open! I went to "my computer" clicked it and still nothing happened. Whenever I click "my documents" the document screen just goes off to the side of my screen and nothing happens, same problem when I try to open "my computer". I have run scans with Norton and Malware Bytes but it cannot find any virus, my computer seems clean at the moment.
View 9 Replies View Relatedcomputer crashed have windows 7 OEM disk and half the product key . How can i get the product key?
View 3 Replies View RelatedI had a bit of bad luck today and my laptop fell on the ground and cracked the case. I checked to make sure everything was functioning and running alright and everything seemed fine, so i proceeded to run solidworks and work on a project and again everything was working fine for about 40 minutes than blue screen popped up and computer tried to restart. When it started backup a screen popped up saying to run startup repair. Ran the repair and when a command window popped up i get a white screen saying error in big red font. So i restarted again and tried to start windows normally it began starting up but switched to start up repair automatically and same thing while start up repair was beggining.to stop happening preferably without re formatting and losing files as i have some really large solidworks files that i need for a project and dont have time to re draw
View 1 Replies View RelatedI can run World of Warcraft and Battlefield 3 at max settings and NOTHING happens. Runs like a dream. However if I play any over games such as Skyrim or the Witcher 2 my computer will completely crash to a black screen and then a weird buzzing noise which lasts 1-2 seconds. It will then require a hard reset.
This crash only happens when I play video games and it seems adjusting the settings doesn't seem to change anything. High or low settings it will still crash. I have ruled out Temperature I think. At it's hottest my GPU will be at about 55C.
My Specs- Operating System:
Windows 2.6.1.7601 (Service Pack 1)
CPU Type:
Intel� Core™ i7 CPU 960 @ 3.20GHz
CPU Speed:
3.2 GHz
System Memory:
7.99 GB
Video Card Model:
NVIDIA GeForce GTX 580
Video Card Memory:
3.97 GB
A few months back, I reinstalled windows after updating my bios.I screwed things up pretty badly because instead of just setting the Bios options to recognize my RAID array and though there was some bigger issue at play an ended up reinstalling windows before I figured it out. Anyway, everything worked fine for a few months, but then this not genuine box started appearing and disappearing in the bottom corner. It does go away, and I am able to install updates, so I think it's just an error with my bios as I saw in another thread, but I want to make sure before I touch anything. I ran the diagnostic report a few minutes back when the logo was down there (although it's since gone away again). [code]
View 1 Replies View RelatedMy windows 7 computer has crashed while using Windows Explorer - or most any file searches since I bought it in late 2009. It has all the upgrades and modifications from Microsoft and Dell, and continues to crash.If I open Windows Explorer, a Browser or any other program with a "File/open" capability, merely while scrolling down the directory listing, it will crash and worse, it will often take all the other opened programs on my screen with it.I have learned that re-trying two or three times somehow solves the program and I can get to what I'm looking for. Also, I have an old graphics program (Paint Shop Pro 5.1) which seems immune to this program. I'm running it under full compatibility mode, and I don't have this problem with it.I have contacted Microsoft so many times - to no avail - that I finally dumped the computer and bought an Apple. But we all know that Apple has it's own problems, so I jump over to the Win 7 machine occasionally. So I have the two computer sitting here side-by-side. Like any strangers, they don't speak to each other, and I'm the third party who needs the friendship of both, individually. I have pretty much decided, however, this Windows 7 model will be my last PC unless someone totally brilliant comes up with a "why this is happening" saving grace.
View 1 Replies View RelatedI thought my problem was a bad SSD, and so did Crucial, but after having it replaced under warranty, I am still having the same BSOD's.
I tried to follow instructions and have attached a zip file with the minidump files analyzed. I have a Sony VAIO VGN-Z570N laptop with a clean install of Win 7 Home Premium 64 bit.
yesterday i was just replacing a new RAM into my pc, bcoz there was something wrong w/ it. (BSOD happen lots of time). Im using a 2x2Gb of DDR3 RAM.
But recently, BSOD keep happening again, so i switch the slot of the DDR ( from slot 1 to slot 2, and slot 2 to slot 1), and everything seems fine until now. I had run the furmark, and the test completed without any interruption.
The question is why is this BSOD still occured while i'd replaced the RAM?
I have an HP g42-415dx laptop with Windows 7 64 bit and AMD Dual-Core Athlon II P340 which I would like to replace for a faster AMD Quad-Core Phenom II P960 from e-Bay.
View 4 Replies View RelatedI have an overclocked Athlon II X4 and I wondered if I needed to do anything before I replace the CPU? Should I remove the overclock?
View 4 Replies View RelatedI am replacing my motherboard with a Asus P8Z68 Pro and adding a Patriot Wildfire 120GB SSD. I will install Windows 7 Pro 64bit SP1 on the SSD. Windows 7 Home Premium 64 bit is currently installed on my WD 300GB drive and configured as my C: drive. Can I leave the WD HDD unconnected, connect my SSD and install the new Windows 7 Pro then connect the WD HDD and maintain a dual boot system for a while while making sure everything is working properly?Will the SSD automatically configure as C:After things are working can I just wipe the boot sector on the old HDD and leave the data intact?
View 1 Replies View RelatedI've bought a second-handed NP-RC530-S06 with a dual boot (win7 and Hackintosh). As I wanted to restore the notebook to factory status, I inserted the DVD (attached to the package) and installed win7. In fact the recovery solution was not accessible by pushing F4; probably the previous owner deleted the OEM partition... By the way, after the OS installation, the PC was (obviously) missing the drivers and the samsung software. I know I could download the samsung stuff from the support page but my idea was to get back the OEM partition.Thus, using testdisk, I re-spawned the OEM partition getting the following:
- name: SAMSUNG_REC
- hard disk letter: D.
- partition type: Primary
is it possible to restore the link between the F4 and the OEM partition? What would be the procedure?
Newegg.ca - XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Cardis my current and old card, I'm trying to find something under the $200 price range again with better performance... also, the card should preferably be the same size lengthwise...8.5") I can probably jam in a 9.2" card..
View 9 Replies View RelatedI have a three yr old hp Pavillion desktop. HD has totally conked out. Was going to just get a new one, but was wondering about the feasibility, and ease, of just replacing the HD. What am I letting myself In for ?
It looks like it will cost me around $ 100 to buy a new drive, so it will be a pricey experiment if it does not work out. Lost a lot of the paperwork, so am not fully sure as to what,is in it now. I looked inside, and apparently it is a Seagate 1 TB drive. 7200 rpm. SATA, 3 GB/sec
Has the dimensions of approx. width of 4 inches and depth of 6 inches. Is this what is called a 3-1/2 inch drive ? So, what do you think ? Worth a try ?
Will the electronics in this 3 yr old pc support a new hd with its built in new electronics O.K. ?
If I decide to try just replacing the drive, what should I buy ? What should I be aware of In regards to buying a hd for my old pc ? And, do they come pre-formatted ? If not how is this handled ?
Are there still master-slave jumpers that need to be set on the new hd ? After installation, do,I just run the "Restore" disk set of 3 disks to get Windows 7 on it again ? Do these restore disks that I created when I first got the pc have Windows 7 already on it ?
Not all that sharp with this stuff, but am a retired Engr., so reasonably comfortable with this kind of thing. Still, I would not really want to dump $100 if there are lots of potential pitfalls and caveats I am not considering.
I've found this guide Windows 7 Installation - Transfer to a New Computer for changing all my components except HDD.My question is, I currently use my install as an HTPC. If I use the sysprep method, will the codecs (ffdshow etc) work correctly afterwards, or will I have to go through installing them all again?I understand graphics drivers will need re-installing.
View 3 Replies View RelatedI have a sony vaio netbook with W7 starter but it is in Spanish! I have W7 ultimate on my external HD and want to replace the W7 starter on the sony with the full ultimate version.
View 4 Replies View RelatedMy hard drive died a couple of days ago and I was wondering if the only way to get the operating system back onto a new one is to purchase a new copy? Kinda new to this so am unsure what to do since it didn't come with any sort of OS recovery cd when I bought it.
View 5 Replies View Related