Newegg.ca - XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Cardis my current and old card, I'm trying to find something under the $200 price range again with better performance... also, the card should preferably be the same size lengthwise...8.5") I can probably jam in a 9.2" card..
View 9 RepliesI purchased a Radeon HD 5770 not to long ago, I just tried to install it but windows does not recognize it! I Know people had trouble with this is the past but with other cards. I Have Windows 7 Home Premium 64 bit.
View 4 Replies View RelatedI saw a similar thread here with the solution of increasing the idle clock speed of your GPU: Windows 7 with Radeon HD 5770
I am having very similar problems where my graphics card driver seems to crash all the time when I'm doing thing that don't stress the GPU. This started happening after I added 8 GB of memory that I bought recently. The thing is I can't find a way to edit the idle clock speed of my GPU in the new CCC. I have tried using the 11.12 and 12.1 and its the same thing. In my C:Users{YourUserName}AppDataLocalATIACE folder I noticed that the profiles.xml file is what has the CoreClockSpeed option but I can't seem to edit it (I open it and change the numbers but when I save it gets reverted right away).
I recently got a 5770 as an upgrade to my 9500gt and I have been having lots of trouble. When I run games, they usually crash after 5-10 min. I have had this happen with Crysis and Mass Effect, though I was able to get Oblivion running for 20 min with no crash.
When the games crash, they lock up the whole system and I have to hit my reset button or turn the PSU off. I don't get a BSOD, just a solid color (or black) with vertical lines on it. Sometimes I will get some flickering before the crash. A couple times I had the game crash to the desktop with the "driver was not responding and has recovered" message.
I have tried to solve this by trying all the drivers for this card (the ones on the cd, the recommended one on the AMD page, and the beta) while making sure to uninstall the old drivers + run driver sweeper in safe mode. I also have updated my chipset to the 7/21 release and my BIOS to version 501.
When I take the card out and replace it with my 9500 gt all the problems go away. I want to figure out if somehow something in my system is messing with this before I go ahead and RMA it only to find out that the card was not the problem. I don't have a minidump, but I have alot of kernel dumps from when the system froze, so I am going to attach it (I don't know if it works the same as a minidump).
My issue is that my video card drivers are not working right I have tried old and new and still locking up the card when I play Dirt 2 or NFS Pro Street. Everything work great until I put a load on the video card like try to play a game or go full screen with online video (u-tube – CNN new) Yes I tried the 9.12 also nothing well fix it.
I have removed all drivers first and all ATI Catalyst, too. I have installed the ATI Radeon HD 5770 on to my old XP Pro 32 bit with 9.12 XP drivers and it works great and can over clock the H out of it.
But Win 7 64 bit with no over clocking at all well not work worth a ^%$. Anyone have this issue? Did ya fix it? I am about to reload XP Pro 32 bit but would hate to do that.
I recently looked into this cards performance and even used furmark to benchmark test it. THIS program made the card reach 91c before I stopped it.I recently got MSI Afterburner to test it out even more accurately and it gave me readings of 79c only after maybe 4-5 minutes of play on Metro 2033 with High settings.It just worries me that it may be overheating at times.
View 9 Replies View RelatedI upgraded my video card from the old GeForce 8800 GT, 512 MB, to the ATI Radeon 5770, 1 GB.
Here's a snapshot the Windows Experience Index:
http://i49.tinypic.com/2zi7915.jpg
Which I got to thinking.. is there a system out there that reports 7.9 in all categories?
i just received my i7 920 computer today and i got the radeon 5770 1 gb graphic card
after installing windows 7 ultimate i tried to set up the dual monitor and under display it only recongizes 1 monitor while the 2nd monitor does what im doing on the first monitor how can i correct this??
a few years ago i got a 5700 with windows vista 32 bit...playing an online game my frame rate was around 180...when I upgraded to win 7 ..ever since then the highest my frame rate is 60...times it drops into the teens..
View 11 Replies View Relatedhas anyone found a compatible tool for 5770 overclocking beyond ccc limits which is
gpu clock-960/mem clock-1445
ive been using ati tray tool on my 4870 but when i install it with this gpu it makes my screen go messed up then my pc reboots. ive tried a few other with no success aswell amd oc ,after burner and rivatune but i havent got a clue how to set that up
any help guys?
Will I actually gain anything out of overclocking an AMD 5770? What's the easiest, most trouble-free way of doing it? I'm thinking AMD overdrive in CCC and letting it automatically detect my settings.
Not sure if it helps but I can turn my fans on my case (Antec 900) up high, if that may help with heat. I've also overclocked my CPU from 3.0ghz --> 3.4ghz and it runs fine so far.
I have my comp with i7 950 and 58s0 board with XFX 5770 card. When my comp is connected to my 32inch Full HD tv at 720p resolution there is no problem but when i change the resolution to 1080p there is severe flickering and rgb colors on screen. I have the latest drivers installed in my system ie Catalyst Control Center 11.11
View 1 Replies View RelatedI just installed Windows 7 pro 64 bit on the system I built tonight, and only one of my monitors will work. I installed the latest drivers for my ATI 5770, and windows is recognizing both monitors, but only one comes on. The other stays in standby mode. I made sure both monitors are enabled.
If I switch the cables in the back of the video card, then the opposite monitor works. I can also drag monitor 2 to the left of monitor one, and it takes the taskbar away from the working monitor as expected, moving it to the monitor that won't turn on. Has anyone seen this issue before?
I bought new computer about 6 month ago. Hdmi worked fine with my tv and I don't know whats wrong now. I know its not the cable because I bought another one and the tv is certainly not because it has 2 hdmi. The computer as I said is almost new so a would be very happy if I wouldn't have to give it repairing.
View 3 Replies View RelatedI thought my problem was a bad SSD, and so did Crucial, but after having it replaced under warranty, I am still having the same BSOD's.
I tried to follow instructions and have attached a zip file with the minidump files analyzed. I have a Sony VAIO VGN-Z570N laptop with a clean install of Win 7 Home Premium 64 bit.
yesterday i was just replacing a new RAM into my pc, bcoz there was something wrong w/ it. (BSOD happen lots of time). Im using a 2x2Gb of DDR3 RAM.
But recently, BSOD keep happening again, so i switch the slot of the DDR ( from slot 1 to slot 2, and slot 2 to slot 1), and everything seems fine until now. I had run the furmark, and the test completed without any interruption.
The question is why is this BSOD still occured while i'd replaced the RAM?
I have an HP g42-415dx laptop with Windows 7 64 bit and AMD Dual-Core Athlon II P340 which I would like to replace for a faster AMD Quad-Core Phenom II P960 from e-Bay.
View 4 Replies View RelatedI have an overclocked Athlon II X4 and I wondered if I needed to do anything before I replace the CPU? Should I remove the overclock?
View 4 Replies View RelatedI am replacing my motherboard with a Asus P8Z68 Pro and adding a Patriot Wildfire 120GB SSD. I will install Windows 7 Pro 64bit SP1 on the SSD. Windows 7 Home Premium 64 bit is currently installed on my WD 300GB drive and configured as my C: drive. Can I leave the WD HDD unconnected, connect my SSD and install the new Windows 7 Pro then connect the WD HDD and maintain a dual boot system for a while while making sure everything is working properly?Will the SSD automatically configure as C:After things are working can I just wipe the boot sector on the old HDD and leave the data intact?
View 1 Replies View RelatedI've bought a second-handed NP-RC530-S06 with a dual boot (win7 and Hackintosh). As I wanted to restore the notebook to factory status, I inserted the DVD (attached to the package) and installed win7. In fact the recovery solution was not accessible by pushing F4; probably the previous owner deleted the OEM partition... By the way, after the OS installation, the PC was (obviously) missing the drivers and the samsung software. I know I could download the samsung stuff from the support page but my idea was to get back the OEM partition.Thus, using testdisk, I re-spawned the OEM partition getting the following:
- name: SAMSUNG_REC
- hard disk letter: D.
- partition type: Primary
is it possible to restore the link between the F4 and the OEM partition? What would be the procedure?
I have a three yr old hp Pavillion desktop. HD has totally conked out. Was going to just get a new one, but was wondering about the feasibility, and ease, of just replacing the HD. What am I letting myself In for ?
It looks like it will cost me around $ 100 to buy a new drive, so it will be a pricey experiment if it does not work out. Lost a lot of the paperwork, so am not fully sure as to what,is in it now. I looked inside, and apparently it is a Seagate 1 TB drive. 7200 rpm. SATA, 3 GB/sec
Has the dimensions of approx. width of 4 inches and depth of 6 inches. Is this what is called a 3-1/2 inch drive ? So, what do you think ? Worth a try ?
Will the electronics in this 3 yr old pc support a new hd with its built in new electronics O.K. ?
If I decide to try just replacing the drive, what should I buy ? What should I be aware of In regards to buying a hd for my old pc ? And, do they come pre-formatted ? If not how is this handled ?
Are there still master-slave jumpers that need to be set on the new hd ? After installation, do,I just run the "Restore" disk set of 3 disks to get Windows 7 on it again ? Do these restore disks that I created when I first got the pc have Windows 7 already on it ?
Not all that sharp with this stuff, but am a retired Engr., so reasonably comfortable with this kind of thing. Still, I would not really want to dump $100 if there are lots of potential pitfalls and caveats I am not considering.
I've found this guide Windows 7 Installation - Transfer to a New Computer for changing all my components except HDD.My question is, I currently use my install as an HTPC. If I use the sysprep method, will the codecs (ffdshow etc) work correctly afterwards, or will I have to go through installing them all again?I understand graphics drivers will need re-installing.
View 3 Replies View RelatedI have a sony vaio netbook with W7 starter but it is in Spanish! I have W7 ultimate on my external HD and want to replace the W7 starter on the sony with the full ultimate version.
View 4 Replies View RelatedMy hard drive died a couple of days ago and I was wondering if the only way to get the operating system back onto a new one is to purchase a new copy? Kinda new to this so am unsure what to do since it didn't come with any sort of OS recovery cd when I bought it.
View 5 Replies View RelatedHOW TO FORMAT PC FROM PENDRIVE
View 2 Replies View RelatedWhat critical issues should I be aware of in the event I would like to REPLACE W7 os with XP3 os on a new laptop with 64-bit / 2GB ram
View 1 Replies View Relatedim just wondering if there's something wrong with mylaptop's battery as its showing this"consider replacing your battery" message on the lower right hand corner.
View 1 Replies View RelatedMy motherboard failed. I can't boot into my existing win7 OS anymore. I will have to install a new board, which usually means, complete new installation and loss of all settings and updates (2 years) Is there any way or tool to transfer my existing OS, with all settings and programs intact into the new hardware environment?
View 6 Replies View RelatedI have just replaced my motherboard after the original was fried by a lightning strike. I'm thrilled that the computer now is working (I'm not a computer geek so replacing the motherboard successfully was a major triumph for me). However, now I am getting messages that I cannot use Windows update since my Windows 7 does not pass the validation test. I went to the Microsoft site and downloaded software to test the validity of my operating system and (hopefully) reregister it, but was unable to. I have the product key for the software but the Microsoft program doesn't even ask for me to reenter it. How do I re-validate my operating system without having to purchase or reinstall the software?
View 2 Replies View RelatedI upgraded my dell studio 1535 from Vista 64 bit to 7 professional 64-bit and now have problems with the keyboard (It's usually recognized, but keystrokes are often not recorded. Sometimes it doesn't work at all). USB devices work fine. I have my Vista OS under c:Windows.old so I would like to replace the 7 keyboard drivers (i8042prt.sys and kbdclass.sys) with the Vista drivers of the same names that are in c:window.oldwindowssystem32drivers Will this cause any problems? If not, how would I go about doing this?
View 1 Replies View RelatedSo yesterday, i opened my laptop to change the keyboard. But when i turned the laptop again, everything worked except that at the batttery icon there is an X. And if you click it it sais ''consider replacing your battery''What to do ?
View 4 Replies View Related