Re-validate Windows 7 After Replacing Motherboard?
Oct 23, 2011
I have just replaced my motherboard after the original was fried by a lightning strike. I'm thrilled that the computer now is working (I'm not a computer geek so replacing the motherboard successfully was a major triumph for me). However, now I am getting messages that I cannot use Windows update since my Windows 7 does not pass the validation test. I went to the Microsoft site and downloaded software to test the validity of my operating system and (hopefully) reregister it, but was unable to. I have the product key for the software but the Microsoft program doesn't even ask for me to reenter it. How do I re-validate my operating system without having to purchase or reinstall the software?
View 2 Replies
ADVERTISEMENT
Jul 21, 2011
I will be replacing my PC's MoBo soon. My PC came with Windows 7 Home Premium 64-BitI want to upgrade the motherboard, but I heard that I will lose my OS. Is that true?If so, can I reinstall my OS (I have the product key, but no installation disk)? Will I lose my data as well?
View 4 Replies
View Related
Feb 9, 2013
My motherboard failed. I can't boot into my existing win7 OS anymore. I will have to install a new board, which usually means, complete new installation and loss of all settings and updates (2 years) Is there any way or tool to transfer my existing OS, with all settings and programs intact into the new hardware environment?
View 6 Replies
View Related
Jan 5, 2013
I've had my notebook for about two and a half years now and its starting to run slow and lag often. I noticed that the cpu usage when just browsing the internet is around 50%, when watching a movie around 70%, and when playing a video game or using a big program around 90%. The notebook has a relatively slow cpu speed (1.2GHz). Is it possible to put a new cpu in my notebook without replacing the motherboard as well? It also has 4gb of RAM which I am going to upgrade to 8gb soon. I was just looking for ways to upgrade my current pc.
View 2 Replies
View Related
Mar 25, 2012
I have a burnt up motherboard in my laptop. My question is do I have to match the exact model to the one that is in there already inside? Or can I get one alittle cheaper? The one that is inside is around $200, and I was hoping to spend a bit less.Me and hubby can replace and change out anything on a desktop, and even build one from scratch.But laptops aren't our thing.This one is an ASUS K52F REV 2.0. Any suggestions, or do I have to match it up with what is factory?
View 2 Replies
View Related
Sep 4, 2011
I have been running Windows 7 for 3 months with no problem. When installed it was validated but suddenly yesterday I began getting notifiations that "Windows 7 is not genuine".
View 5 Replies
View Related
Nov 27, 2011
How do I activate & validate Windows 7 using small manufacturer's COA?The COA is 14 digits as opposed to Microsoft's 25 digit product key. When I try entering this code it is immediately rejected.
View 8 Replies
View Related
May 6, 2012
I am trying to restore several folders from a backup on an external hard drive. The backup file appears to be empty (0 bytes), but I am certain it is not. When I try to restore some of the folders I get the following error: > Restore encountered a problem while validating the zip file:\?Volume{0f497a5d......435}XXXXBackup Set 2011-12-12 175633Backup Files 2011-12-12 175633Backup files 239.zipThe following informati The backup file could not be found. Make sure the drive that the backup is saved on is attached or try to restore from a different backup. (0x8100001A)Strangely, I am not even interested in restoring from the backup in the error message, only from my most recent one (2012-05-04).I have not moved the location of the backup, so the additional/hidden files should still be on the external drive as far as I know
View 1 Replies
View Related
Oct 25, 2011
how to validate security code in yahoo
View 1 Replies
View Related
Nov 23, 2011
How to validate security code in yahoo
View 16 Replies
View Related
Dec 14, 2011
yahoo wont let me access my email, their is a caps lock, dont know what my security code is or what my id is i thought it was my email address
View 1 Replies
View Related
Dec 3, 2012
New Dell from Dell. I log into MS and activate Windows 7 sp1. I try to download the MSR Profile tool from Download WSRProfile from Official Microsoft Download Center I hit "continue", takes me to Genuine W Validation page at Genuine Windows Validation -Microsoft Download Center I hit "continue", "genuinecheck.exe" downloads, I run it. Window pops up, ~"Code not available. May be due to tech difficulties, or you may be running an unsupported OS. Close and try again. error code 0x80072f07." Search shows error code 0x80072f07 is windows mobile version 5 code message"Synchronization could not be completed. Try again later." Troubleshooting info. is "This error code is an Internet error that is typically temporary. Try to synchronize again later."
Search shows this error code is common with Dell machines trying to validate when downloading windows updates. This error code is related to security Active Sync used with Windows Mobile device security. But search shows many inquiries to Dell and MS about this code are from users NOT on mobile devices. The Inspiron is in my home on 4G LTE dedicated wireless connection from local broadband provider. Roommate's new HP Windows 7 sp1 laptop DOES validate, no problem, sitting right next to my machine on same 4G LTE connection.I have tried the validation procedure, both the "auto" method and alternate manual method on IE, FF, and Chrome, many times. Always -> same error.However, automatic windows updates download and install flawlessly on my Dell (validation not required) x 20 at least... BTW, I am not running an unsupported OS. This most recent version of MSR Profile tool that I am trying to download doesn't seem to be available from any other source than MS.Yes, I can upload MSR Profile tool from roommate's HP to thumb drive, and then download it from thumb drive to my Dell, but issue remains - and will come up again - downloading from MS when pre-validation is required, but fails, and download is blocked.
View 9 Replies
View Related
Nov 24, 2011
I have a sony vaio netbook with W7 starter but it is in Spanish! I have W7 ultimate on my external HD and want to replace the W7 starter on the sony with the full ultimate version.
View 4 Replies
View Related
Mar 9, 2012
What critical issues should I be aware of in the event I would like to REPLACE W7 os with XP3 os on a new laptop with 64-bit / 2GB ram
View 1 Replies
View Related
Dec 18, 2011
915 motherboard intel support chipset motherboard sound, vga, usb drivers download
View 1 Replies
View Related
Nov 30, 2011
So yesterday, i opened my laptop to change the keyboard. But when i turned the laptop again, everything worked except that at the batttery icon there is an X. And if you click it it sais ''consider replacing your battery''What to do ?
View 4 Replies
View Related
Jul 24, 2010
I keep getting a message saying 'Consider Replacing Battery'. I'm running Windows 7 on a Toshiba A300. I've read that this is a problem with Windows 7. I'm wondering if Toshiba has a fix for this such as a fix for the BIOS.etc or maybe a driver? It looks like I should downgrade to XP..
View 9 Replies
View Related
Nov 27, 2011
I thought my problem was a bad SSD, and so did Crucial, but after having it replaced under warranty, I am still having the same BSOD's.
I tried to follow instructions and have attached a zip file with the minidump files analyzed. I have a Sony VAIO VGN-Z570N laptop with a clean install of Win 7 Home Premium 64 bit.
View 7 Replies
View Related
Dec 21, 2011
yesterday i was just replacing a new RAM into my pc, bcoz there was something wrong w/ it. (BSOD happen lots of time). Im using a 2x2Gb of DDR3 RAM.
But recently, BSOD keep happening again, so i switch the slot of the DDR ( from slot 1 to slot 2, and slot 2 to slot 1), and everything seems fine until now. I had run the furmark, and the test completed without any interruption.
The question is why is this BSOD still occured while i'd replaced the RAM?
View 9 Replies
View Related
Jul 9, 2012
I have an HP g42-415dx laptop with Windows 7 64 bit and AMD Dual-Core Athlon II P340 which I would like to replace for a faster AMD Quad-Core Phenom II P960 from e-Bay.
View 4 Replies
View Related
May 22, 2011
I have an overclocked Athlon II X4 and I wondered if I needed to do anything before I replace the CPU? Should I remove the overclock?
View 4 Replies
View Related
Aug 24, 2011
I am replacing my motherboard with a Asus P8Z68 Pro and adding a Patriot Wildfire 120GB SSD. I will install Windows 7 Pro 64bit SP1 on the SSD. Windows 7 Home Premium 64 bit is currently installed on my WD 300GB drive and configured as my C: drive. Can I leave the WD HDD unconnected, connect my SSD and install the new Windows 7 Pro then connect the WD HDD and maintain a dual boot system for a while while making sure everything is working properly?Will the SSD automatically configure as C:After things are working can I just wipe the boot sector on the old HDD and leave the data intact?
View 1 Replies
View Related
Oct 5, 2011
I had been reading Sevenforums before i actually join it. Eversince then i got most of my doubt solve.I just bought a Sony Vaio Y series come with Windows 7 Starter.I got a bad deal form Malaysia giving windows 7 stater and 320gb hd, whereas S'pore giving Windows 7 home premiun and 500hd. Anyway i like the design and portability of this model.I got a Year Warranty, But i'm wanted to upgrade it to Windows 7 Ent. and also wanted to upgrade my ram to 4GB max. my existing one is 2GB. but i afraid this would void the warranty.Let get my question i wanted to update to Windows 7 Ent with out and not keeping my starter. but i afraid of driver issue, i plan to boot by USB setup.
View 5 Replies
View Related
Jan 20, 2013
I've bought a second-handed NP-RC530-S06 with a dual boot (win7 and Hackintosh). As I wanted to restore the notebook to factory status, I inserted the DVD (attached to the package) and installed win7. In fact the recovery solution was not accessible by pushing F4; probably the previous owner deleted the OEM partition... By the way, after the OS installation, the PC was (obviously) missing the drivers and the samsung software. I know I could download the samsung stuff from the support page but my idea was to get back the OEM partition.Thus, using testdisk, I re-spawned the OEM partition getting the following:
- name: SAMSUNG_REC
- hard disk letter: D.
- partition type: Primary
is it possible to restore the link between the F4 and the OEM partition? What would be the procedure?
View 8 Replies
View Related
Jul 3, 2011
Newegg.ca - XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Cardis my current and old card, I'm trying to find something under the $200 price range again with better performance... also, the card should preferably be the same size lengthwise...8.5") I can probably jam in a 9.2" card..
View 9 Replies
View Related
May 30, 2012
I have a three yr old hp Pavillion desktop. HD has totally conked out. Was going to just get a new one, but was wondering about the feasibility, and ease, of just replacing the HD. What am I letting myself In for ?
It looks like it will cost me around $ 100 to buy a new drive, so it will be a pricey experiment if it does not work out. Lost a lot of the paperwork, so am not fully sure as to what,is in it now. I looked inside, and apparently it is a Seagate 1 TB drive. 7200 rpm. SATA, 3 GB/sec
Has the dimensions of approx. width of 4 inches and depth of 6 inches. Is this what is called a 3-1/2 inch drive ? So, what do you think ? Worth a try ?
Will the electronics in this 3 yr old pc support a new hd with its built in new electronics O.K. ?
If I decide to try just replacing the drive, what should I buy ? What should I be aware of In regards to buying a hd for my old pc ? And, do they come pre-formatted ? If not how is this handled ?
Are there still master-slave jumpers that need to be set on the new hd ? After installation, do,I just run the "Restore" disk set of 3 disks to get Windows 7 on it again ? Do these restore disks that I created when I first got the pc have Windows 7 already on it ?
Not all that sharp with this stuff, but am a retired Engr., so reasonably comfortable with this kind of thing. Still, I would not really want to dump $100 if there are lots of potential pitfalls and caveats I am not considering.
View 8 Replies
View Related
Jan 16, 2012
I've found this guide Windows 7 Installation - Transfer to a New Computer for changing all my components except HDD.My question is, I currently use my install as an HTPC. If I use the sysprep method, will the codecs (ffdshow etc) work correctly afterwards, or will I have to go through installing them all again?I understand graphics drivers will need re-installing.
View 3 Replies
View Related
Dec 31, 2011
My hard drive died a couple of days ago and I was wondering if the only way to get the operating system back onto a new one is to purchase a new copy? Kinda new to this so am unsure what to do since it didn't come with any sort of OS recovery cd when I bought it.
View 5 Replies
View Related
Mar 2, 2012
HOW TO FORMAT PC FROM PENDRIVE
View 2 Replies
View Related
Jul 25, 2012
im just wondering if there's something wrong with mylaptop's battery as its showing this"consider replacing your battery" message on the lower right hand corner.
View 1 Replies
View Related
Dec 24, 2009
I upgraded my dell studio 1535 from Vista 64 bit to 7 professional 64-bit and now have problems with the keyboard (It's usually recognized, but keystrokes are often not recorded. Sometimes it doesn't work at all). USB devices work fine. I have my Vista OS under c:Windows.old so I would like to replace the 7 keyboard drivers (i8042prt.sys and kbdclass.sys) with the Vista drivers of the same names that are in c:window.oldwindowssystem32drivers Will this cause any problems? If not, how would I go about doing this?
View 1 Replies
View Related