I have been running Windows 7 for 3 months with no problem. When installed it was validated but suddenly yesterday I began getting notifiations that "Windows 7 is not genuine".
View 5 RepliesI bought Win 7 Ultimate for 2 installs over a year ago. I bought an Asus Laptop a year ago which came win the 7 Home and upgraded to Ultimate with no problems at all. 3 months ago I bought a Dell with 7 Home and upgraded it to Ultimate. Again no problems! About a week ago I started getting multiple error message on the Asus stating that my Windows 7 was NOT valid. Now today I am getting the same messages on the Dell. Not able to get help from Microsoft which keeps insisting that these operating systems are invalid. Two huge questions: IF this is actually the case why would it be such a very long time before getting these error messages, Also, what are the options now I am being told there are 30 days remaining before the OS on both systems locks up?
View 9 Replies View RelatedI have suddenly notice that when I place my mouse over the View Desktop button at the bottom right hand corner of the screen, there is a message telling me that my version of Windows 7 is not authentic. But it is, and was pre-installed on my laptop when I bought it
View 2 Replies View RelatedI have an ASUS laptop with Windows 7 installed. It was purchased from Office Max in October 2010. Never had any problems until two weeks ago when a rogue message showed up in the lower right-corner of the screen telling me my copy of Windows was not authentic. I have the COA attached to the bottom of my computer with the product key, etc.
Might there be a new virus out that is causing this to happen? With that said, my ability to download any MS updates is now gone when up until this time I had downloaded every important and critical update recommended by MS.
I have just replaced my motherboard after the original was fried by a lightning strike. I'm thrilled that the computer now is working (I'm not a computer geek so replacing the motherboard successfully was a major triumph for me). However, now I am getting messages that I cannot use Windows update since my Windows 7 does not pass the validation test. I went to the Microsoft site and downloaded software to test the validity of my operating system and (hopefully) reregister it, but was unable to. I have the product key for the software but the Microsoft program doesn't even ask for me to reenter it. How do I re-validate my operating system without having to purchase or reinstall the software?
View 2 Replies View RelatedHow do I activate & validate Windows 7 using small manufacturer's COA?The COA is 14 digits as opposed to Microsoft's 25 digit product key. When I try entering this code it is immediately rejected.
View 8 Replies View Relatedwhat is the best way to repair win 32 configeration?
View 4 Replies View RelatedI just upgraded to Windows 7 on my notebook and installed latest version of authentec fingerprint drivers. After installation, I notice that there is TrueSuite 2.0 fingerprint software included with the drivers, which is made by authentec also, and it can read fingerprints fine and log me into windows too. But when I install digitalpersona 4.0.1, it complaints that the fingerprint reader is not attached. Only if TrueSuite could log me into website as well using fingerprints, I wouldn't even bother about DigitalPersona, but since its only for logging into windows, i want to get DP working. Is someone else facing similar problem with DP not working with Authectec reader on Windows 7 so far?
View 9 Replies View RelatedI am trying to restore several folders from a backup on an external hard drive. The backup file appears to be empty (0 bytes), but I am certain it is not. When I try to restore some of the folders I get the following error: > Restore encountered a problem while validating the zip file:\?Volume{0f497a5d......435}XXXXBackup Set 2011-12-12 175633Backup Files 2011-12-12 175633Backup files 239.zipThe following informati The backup file could not be found. Make sure the drive that the backup is saved on is attached or try to restore from a different backup. (0x8100001A)Strangely, I am not even interested in restoring from the backup in the error message, only from my most recent one (2012-05-04).I have not moved the location of the backup, so the additional/hidden files should still be on the external drive as far as I know
View 1 Replies View Relatedhow to validate security code in yahoo
View 1 Replies View RelatedHow to validate security code in yahoo
View 16 Replies View Relatedyahoo wont let me access my email, their is a caps lock, dont know what my security code is or what my id is i thought it was my email address
View 1 Replies View RelatedNew Dell from Dell. I log into MS and activate Windows 7 sp1. I try to download the MSR Profile tool from Download WSRProfile from Official Microsoft Download Center I hit "continue", takes me to Genuine W Validation page at Genuine Windows Validation -Microsoft Download Center I hit "continue", "genuinecheck.exe" downloads, I run it. Window pops up, ~"Code not available. May be due to tech difficulties, or you may be running an unsupported OS. Close and try again. error code 0x80072f07." Search shows error code 0x80072f07 is windows mobile version 5 code message"Synchronization could not be completed. Try again later." Troubleshooting info. is "This error code is an Internet error that is typically temporary. Try to synchronize again later."
Search shows this error code is common with Dell machines trying to validate when downloading windows updates. This error code is related to security Active Sync used with Windows Mobile device security. But search shows many inquiries to Dell and MS about this code are from users NOT on mobile devices. The Inspiron is in my home on 4G LTE dedicated wireless connection from local broadband provider. Roommate's new HP Windows 7 sp1 laptop DOES validate, no problem, sitting right next to my machine on same 4G LTE connection.I have tried the validation procedure, both the "auto" method and alternate manual method on IE, FF, and Chrome, many times. Always -> same error.However, automatic windows updates download and install flawlessly on my Dell (validation not required) x 20 at least... BTW, I am not running an unsupported OS. This most recent version of MSR Profile tool that I am trying to download doesn't seem to be available from any other source than MS.Yes, I can upload MSR Profile tool from roommate's HP to thumb drive, and then download it from thumb drive to my Dell, but issue remains - and will come up again - downloading from MS when pre-validation is required, but fails, and download is blocked.
laptop, lenovo s10-3s running on windows 7. All of a sudden she cant start or booth it up. Message says "windows failed to start. a recent hardware or software change might be the cause." I ask her if she installed some software or connected something before it happened, and she said she didnt do anything and last night it was just functioning fine. We tried restart and press F8, booth in the safe mode,safe mode w/ networking. But it still failed to start.
View 3 Replies View RelatedWhat I think to have caused the problem is in this previous threadnyway, after doing that last fix and booting the computer the next day, I got an error saying I may be a victim of software counterfitting, followed by a black wallpaper with a not genuine message at the bottom right. I need to get it working again so I can get updates, and I've lost my Windows 7 Home Premium key which makes this all the more difficult to fix with normal tech support from Microsoft
View 10 Replies View RelatedI built this PC myself. It was built around 5 months ago. I installed Windows 7, and it said it was perfectly genuine and everything. I bought this on eBay from a person with 99% Positive feedback and with 2300 stars, so I'm sure it isn't pirated. Now randomly I have a black wallpaper and in the bottom right corner it says Windows 7, Build 7601, This copy of Windows is not genuine. I've scanned the computer fully for viruses with AVG and Malware with Malwarebytes, and found no problems. [code]
View 1 Replies View RelatedMy Windows 7 PC won't boot. There have been no software or hardware changes (potentially a windows update was applied that I don't know about, shutdown one night, all OK and then couldn't boot up the next morning). I get the windows 7 logo, then a black screen with mouse cursor, but I can't move the cursor. There's no keyboard response either (I don't think this is the infamous black screen of death as this typically still responds to a CTRL+ALT+DEL?). Safe Mode is no different apart from seeing drivers load, it stops at CLASSPNP before pausing for a while and then the black screen.
Managed to run the startup recovery tool, although I only get this option sometimes when trying to boot. It scans but can't auto fix the problem but reports a corrupt registry (I don't believe this is the problem though).
I removed my boot drive (which is an OCZ SSD) and mounted as a secondary drive in another PC so I could browse files on that drive. So I managed to restore my registry files from the windows backup files (windowssystem32config
egback), then replaced my SSD in my PC, but still no boot (which is why I don't believe it's a reg problem). I swapped out the SSD to my other PC again, this time I ran a chkdsk on my SSD, it found some small problem, nothing major so I fixed it successfully and swaped back to my original PC again, but still no change, still not booting. I swapped it out again, this time I had a look at ntbtlog.txt, it shows lots of inf's not loading (CLASSPNP being the last one to load.
i have windows 7 ultimate x64, few days back it suddenly became very slow. it takes about 3 mins to show desktop after logging in. then another 3-4 mins before i can use the machine . then also it works very slowly.
View 9 Replies View RelatedLast night after some modem problems which may be coincidental Windows 7 PRO (OEM) suddenly de-activated. It now will not re-activate either by the normal method or by telephone. No hardware has been changed and to my knowledge no new software was installed although some of course may have been updated. I was simply attempting to browse the web. It came with a new build and has been fine since November 2011. Checking the error logs I find these related messages. Code: Genuine state set to non-genuine (0x00000000) for application Id 55c92734-d682-4d71-983e-d6ec3f16059f Code: Acquisition of genuine ticket failed, hr=0xC004C4A2) for template Id 66c92734-d682-4d71-983e-d6ec3f16059f I ran the MGADiag tool and it produced this.
View 9 Replies View RelatedMy friend's laptop (ASUS G72GX) won't boot into Windows 7. Specs:Windows 7 x64 Home PremiumIntel Core 2 Duo P87006 GB RAMNVIDIA GeForce GTX 260MHe said it worked fine in his room and then he brought it downstairs (I'm assuming he did a hard power off by pressing the power button) and that's when it stopped working. Here are some things it does:After pressing the power button, the ASUS logo will appear (this happens during POST) and then the screen goes and stays blank.-Sometimes, it gets to a screen that gives the option of starting Windows normally or running Startup Repair.-Startup Repair hangs at random places (progress bar fills fast and ten completely stops).-If the option to start Windows normally is chosen, it eitherhangs at the 'Starting Windows' screen (Windows 7 logo does not animate) or flashes a blue screen that is much too quick to read (just a fraction of a second) and then the laptop restarts.
I can get into the BIOS options and everything seems normal, including temps (though I'm not sure how high they were when the problem started). However, upon exiting the options, the problems above proceed as normal.I also tried hitting both F8 and F12 during boot, but can't get to the screen that would let me start in Safe Mode since it hangs at the Starting Windows screen.I'm kind of at a loss here. My friend's not exactly careful with his laptop, but this is the first time I've seen a computer refuse to boot like this.
Yo people. So it was a regular day, found a program online and created a restore point before installing... suddenly about two hours later while surfing the interweb boom!! Internet Explorer stop responding so I think "it's not so bad... it happans timw to time" but the only differents is that the message doesn't pop up, like windows doesn't even relize it! But continuing on, I right click on the taskbar to start task manager because clicking the exit button fails the taskbar AKA explorer.exe caught the same flu as IE. So now I can touch the taskbar so Ctrl+Alt+Del is left... screen turns black as always when I do the keystoke but it stays black. So I shut off my computer. Start-up was a little more slow and worked fine before I open IE and it starts all over again. I try restoring, scanning (later with various other antivirus) nothing found, memory test (normal), and everything else like uninstalling unused programs and fixing the registry with Registry Repair. I got Startup Delayer which helped with the slow Start-up but nothing eles. But sometimes like 1/5 times my computer boots up and i perfect like before but when I turn it off it happens again on the next start-up
View 2 Replies View RelatedAfter installing a trial version of AutoCad Inventor, ( Win7 Ult 64-bit > Dell Precision T5400) I find that I am not not allowed to download anything. I did turn off Windows firewall and defender and anti-virus as advised when downloading, changed the UAC (User Account Control), but when trying to download the new version of Firefox it stops with "you don't not have sufficient rights to allow this" to thereabouts.
I've gone through every security and administrator setting I can, in System, msconfig, and so on. I've restarted, shut down, "changed user"- whatever I can think of.
About 9 months ago I was upgrading the hardware on my PC including the hard drive. To cut to the chase, a friend of mine had a copy of the 64bit window 7 ultimate and told me to install that and buy a window key online to save some money. He said it works fine as he had done it before. So I did that, and it worked great until a couple of days ago, when I started getting all the windows not genuine boxes and signs on screen. I have tried re-entering the windows key with no luck.
View 11 Replies View RelatedEverything was fine with my pc for about 6 months now since I did a fresh install on a ssd. Today everything was working great, I never install windows 7 updates and use my own nod32 anti virus. I have windows 7 64x
I shutdown the computer and everything was fine. When I tried starting the computer again it was stuck on the windows logo with starting windows words. The animation of the flag was animated and not frozen. My post message submitted at a regular timeframe. I did do windows restore and still takes about 30 min for windows to start. Tried windows repair, took 30 min to even get into it, and startup repair says there is nothing wrong. Safe mode gets stuck too and won't start up.
I also checked bios to see if there where any changes, but everything seems in order, the boot sequence and order and so on. I have no clue whats wrong and scared to turn off the computer incase next time it completely stops starting.
I have a laptop, Acer aspire 7001, and it runs on Windows 7. It ran fine for a year, but a couple weeks ago I dared to install windows updates. There were a lot of them, including SP1. I restarted, but suddenly windows wouldn't open. I managed to start in safe mode and found SP1 wasn't installed correctly. I removed it, ran a couple scans (antivirus, malware, register) and restarted. Still windows won't start in normal mode. A memory scan found nothing wrong. CHKSDK finds nothing. Startup Repair sometimes says "restart to finish", and sometimes "cannot repair". I have written down every startup repair error report.
I tried to use Windows Recovery, but found all restore points had been removed! Furthermore, I tried to use the windows 7 cd, but the laptop refuses to read the CD. It's not just with the windows cd (which works on other computers). The BIOS recognizes the CD reader, but it seems unable to read cd's. So I'm guessing there's a hardware problem there.
[code]...
I don't know what is the best free software to clean all the cookies and registry files. my laptop always lag this past few days and suddenly "this version of windows is not genuine" appear on bottom left of my wallpaper. i've installed paid anti virus internet security for my laptop. so what should i do? my windows 7 home premium is genuine because i bought asus
View 14 Replies View RelatedWe have a windows 2000 server, a few XP, 1 vista and 1 windows 7. Everything works fine before but all in a sudden, only the Windows 7 cannot connect to the server. The 7 is a new PC, it works and connect to the server fine for the first 3 months, but all of a sudden, it just cannot connect and keep prompting that the user name and password is wrong. I have re-install the 7 (it is HP and we use the recovery disc) and I even get a new wireless adapter to test, the 7 can get on the internet, everything except the server. But all others windows has no problem with the server, I am guess it has to do with the 7. I am getting so frustrated that I also gonna use that HP windows 7 into a door stopper.
View 2 Replies View RelatedI just did a clean re install of windows 7 x64, and right off the bat got these 2 bsod's.
View 3 Replies View Relatedso installed a fresh version of windows to update from xp to windows 7 and all of a suppen my computer wouldnt recognize my flash drive, so i eventualy after trying other stiff that didnt work looked in device manager and saw that i was missing "USB 2.0 Flash Disk USB Device" and "Mass Storage Controller" and idk how to replace them, when i click update driver device manager stops responding. (a breif google search yeilded nothing) i realy need my music which is all on my flash drive aswell as the fact that i need my mouse which is also atached via usb
View 1 Replies View Relateduntil a couple of weeks ago my PC was running perfectly, quickly, etc but one day i turn it on and suddenly EVERYTHING is slow.For example, every time i open a folder in explorer, i have to wait about 30secs for all its contents to load, chrome is being un-usably slow (same with other browsers) even just loading a google search. when i listen to music it often cuts out for several seconds and everything freezes up etcetc but throughout this my CPU will stay very close to 0% (like it should be) i have run virus checks, windows repair, a DDS check (whatever that is) etc and nothing seems out of place. on top of all this now windows is suddenly starting to question if i am using genuine windows 7 (i am) AND have got a few seemingly random BSODs?
SPECS:
->Windows 7 home premium 64bit (service pack 1)
->i5 750 intel CPU @ 2.67GHz
->NVIDIA GeForce 210 graphics card
->4GB RAM
I've got 5 PCs here.. 2x Win 7 x64 v7100, 1x Vista x32, 2x XP Pro x32. Strangely, within the past 24 hours both of my Windows 7 PCs have stopped booting. They turn on, hard drives spin, fans come on. There is no beep, and no signal to the peripherals, including keyboard, mouse, monitor. Identical problems on both systems.
Specs on Windows 7 System 1 (2 years old):
Motherboard Asus P5N32-E SLI
CPU Intel Core 2 Extreme QX6850 Quad-Core 3.0GHz
Ram 4 x OCZ DDR2-800 Reaper 2048MB
Video Card 2 x Asus GeForce 8800 Ultra 768MB
Power Supply Silverstone ST1000 1000W
Specs on Windows 7 System 2 (1 month old):
Motherboard Asus P5Q-EM
CPU Intel Core 2 Quad Q9650 Quad-Core 3.0GHz 95W
Ram 4 x Kingston ValueRAM DDR2-800 2048MB
Video Card Asus GeForce 9600GT 512MB Silent
Power Supply Corsair VX 450W Power Supply
I suppose it's possible that both motherboards just coincidentally failed in the same day but that seems pretty unlikely. They are both ASUS. On System 2, the second system to fail, I did notice that the computer had been on with the screen saver up for a little while. Someone had been using it only about 20 minutes earlier. I thought it'd entered power saving mode and turned off the screen but when I went to bring it back up, I couldn't. I noticed that the light on the front of the box was flashing. I tried powering off by holding down the power button, then powering back up but had no luck. I also tried turning it off at the power supply and unplugging it for a few minutes but that didn't help either.