DigitalPersona Not Recognizing Authentic Reader?

Aug 11, 2009

I just upgraded to Windows 7 on my notebook and installed latest version of authentec fingerprint drivers. After installation, I notice that there is TrueSuite 2.0 fingerprint software included with the drivers, which is made by authentec also, and it can read fingerprints fine and log me into windows too. But when I install digitalpersona 4.0.1, it complaints that the fingerprint reader is not attached. Only if TrueSuite could log me into website as well using fingerprints, I wouldn't even bother about DigitalPersona, but since its only for logging into windows, i want to get DP working. Is someone else facing similar problem with DP not working with Authectec reader on Windows 7 so far?

View 9 Replies


ADVERTISEMENT

Win 7 Not Recognizing Internal Memory Card Reader

Oct 24, 2009

"One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. I have 4 USB ports in the back which are connected to my printer, mouse, keyboard and external hard drive which are all functioning fine.

I have two USB ports on the front which are unoccupied. I have an internal memory card reader in this desktop, and that's the only thing I think it can be.

To resolve the problem it is asking me to reconnect the device or replace it. I have disconnected and reconnected th memory card reader while the pc was on, the pc recognizes a device has been disconnected and reconnected, but not what it is.

Under device manager, it says, "Windows has stopped this device because it has reported problems. (Code 43)" I have therefore disabled it for now, but would like to get it working. Do you think this problem wil be fixed automatically in an update sometime.

When I go to driver details, it says "No driver files are required or have been loaded for this device" And when I click on update driver, it says I have the latest driver.

View 9 Replies View Related

Internal Card Reader Not Recognizing Card; Driver Is Working Properly?

Nov 6, 2012

I have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.

View 3 Replies View Related

1 5 Win 32is Not Authentic?

Sep 14, 2011

what is the best way to repair win 32 configeration?

View 4 Replies View Related

Suddenly Windows 7 Says Not Authentic

Mar 31, 2011

I bought Win 7 Ultimate for 2 installs over a year ago. I bought an Asus Laptop a year ago which came win the 7 Home and upgraded to Ultimate with no problems at all. 3 months ago I bought a Dell with 7 Home and upgraded it to Ultimate. Again no problems! About a week ago I started getting multiple error message on the Asus stating that my Windows 7 was NOT valid. Now today I am getting the same messages on the Dell. Not able to get help from Microsoft which keeps insisting that these operating systems are invalid. Two huge questions: IF this is actually the case why would it be such a very long time before getting these error messages, Also, what are the options now I am being told there are 30 days remaining before the OS on both systems locks up?

View 9 Replies View Related

'copy Of Windows 7 Is Not Authentic'

May 5, 2012

I have suddenly notice that when I place my mouse over the View Desktop button at the bottom right hand corner of the screen, there is a message telling me that my version of Windows 7 is not authentic. But it is, and was pre-installed on my laptop when I bought it

View 2 Replies View Related

Windows 7 Suddenly Not Authentic And Won't Validate

Sep 4, 2011

I have been running Windows 7 for 3 months with no problem. When installed it was validated but suddenly yesterday I began getting notifiations that "Windows 7 is not genuine".

View 5 Replies View Related

Not An Authentic Copy Of Windows Message Just Started Showing Up

Jan 10, 2012

I have an ASUS laptop with Windows 7 installed. It was purchased from Office Max in October 2010. Never had any problems until two weeks ago when a rogue message showed up in the lower right-corner of the screen telling me my copy of Windows was not authentic. I have the COA attached to the bottom of my computer with the product key, etc.

Might there be a new virus out that is causing this to happen? With that said, my ability to download any MS updates is now gone when up until this time I had downloaded every important and critical update recommended by MS.

View 9 Replies View Related

DVD CD Rom Not Recognizing Cd

Apr 6, 2012

When I run the program from the start menu the title menu comes up and when I click start a box pops up saying 'Please insert successful driver DVD to continue or Cancel to quit programme', So i then put the dvd into the laptop and it makes all sorts of stuttering noises and I keep clicking ok on the box and it just keeps returning the same message. Basically I can't run the program.It's not the CD because I have just installed and opened it on another laptop just fine.The problem laptop plays movies from DVDs no problems it's just this program I can't open.

View 3 Replies View Related

Only Recognizing 1GB RAM

Nov 4, 2009

I have just upgraded to Windows 7 from XP...

I have 2GB RAM installed on my laptop but for some reason Windows 7 is only recognising 1GB ?

View 9 Replies View Related

Windows 7 Not Recognizing New Hdd?

Sep 10, 2012

I have done a fresh install of Win 7 64bit on my new SSD 160GB,i plugged in my other two now spare HHD.500GB seagate and a 160GB seagate,they were picked up in the bios,but when windows restarted in the install,it would not boot up,after a bit of tweeking if i unplugged one of the drives it booted up and continued to finish the install,there was only the two drives showing,i restarted the PC,plugged in the HDD again,the same problem,the Motherboard is a ASUS P8H67-mPro,it has 6 sata ports 2 at 6g and 4 at 3g,the bios is up to date,I have tried to contact ASUS but they have not replied a week ago,I just wanted to no if this motherboard can run 3 HDD without RAID or am i wasting my time

View 2 Replies View Related

USB Ports Not Recognizing Anything

Jan 12, 2013

When I plug a USB device into my laptop it doesn't recognize it Shown Here: Rec008.avi - download now for free. File sharing. Software file sharing. Free file hosting. File upload.

View 1 Replies View Related

Windows 7 Not Recognizing All RAM?

Dec 7, 2011

I am running Win 7 on a Intel Core I7 920 processor. My motherboard is a Gigabyte EX58-UD3R FE motherboard. My RAM is (4) G Skill F3-16000CL9-2GBRH 2G sticks of DDR3 RAM. It says the type is PC3-10700H. When I check my system settings in windows, it says I have 8 GB installed but only 6 GB usuable. Is there any way to make it so that all of it is usable

View 1 Replies View Related

Cd Drive Not Recognizing Certain Cds?

Feb 12, 2012

my cd drive doesnt recognise certain cds but will recoginse others. the cd it wont recognise is brand new so there isnt anything wrong with the cd itself

View 1 Replies View Related

USB 2.0 Card Not Recognizing Anything?

Apr 21, 2012

A card that i got installed recently it installed fine after start up but is not letting me install or even recognizing any hardware i plug into it. It might be a dodge driver that was intalled but ive uninstalled a few times and windows 7 doesnt even ask me after boot up for a installer it just searches the net and installs by itself. I need to get this fixed fast as i have lots of hardware i want to connect with it.

View 4 Replies View Related

Not Recognizing Hardware

Sep 6, 2009

After I have installed windows 7 onto my laptop, it doesnt recognize things like my scroll bar on my touch pad, I dont think it recognizes my chipset because some games I have tried to play lately say I dont even have a chipset... What is causing this? Does Windows 7 not configure to your computer when you install it? Im confused.

View 4 Replies View Related

WMC Is Not Recognizing Radio?

Aug 19, 2012

I have recently bought a DVB-T TVRadio tuner (usb stick) The brand is a localized one existing only in Greece (Turbo-X) link translated: Google Translate Anyway, the thing is that although it is fully functional (TV+Radio) with the software it comes with(ViVaTVViVaRadio), when i use it with WMC only the TV works On Music>Radio tab shows "to play FM radio, you must first install a radio tuner"

Useful info: I believe the whole product is an almost exact copy of one of the Kworld's tuner sticks, because the software that comes with the tuner is directly from Kworld Multimedia (with a tiny amount of name editing) and the remote control is identical to Kworld's remote (which is ,by the way, set up for WMC and not for ViVaTV).

View 1 Replies View Related

ReadyBoost Not Recognizing More Than 2GB

Oct 29, 2011

I have a new Notebook, an LG X140, with Windows 7 Home Premium ... activated as Genuine.It only came with 512 MB of RAM so I decided to use ReadyBoost and a 4 GB USB Drive to add more RAM.I selected "Dedicate this device to ReadyBoost" which selected 3851 MB. It only actually created an extra 2 GB of RAM. I believe I understand why there was only 3851 MB available and why it only could create 2 GB of RAM from that. so that isn't so much of an issue for me.I then used a 1 GB SD Chip which is ReadyBoost Compatible and added that to ReadyBoost the same way, hoping that I could push it to 4 GB of RAM ... however my computer still only shows 2 GB of RAM. I have tried swapping different USB Drives and SD Cards but with no success, I can't seem to get my computer to recognize any more than 2 GB of RAM.

View 9 Replies View Related

DVD Drive Only Recognizing Cd's And Not Dvd's?

May 24, 2012

What can i do to get my computer to recognize not only CD's but DVD's

View 2 Replies View Related

Laptop Not Recognizing Usb?

Sep 22, 2012

i connected my old laptop satta drive via usb to my presario laptop. it loads drivers but i am not seeing it displayed on the my computer window. i cannot acess the drive

View 1 Replies View Related

Pc Not Recognizing Any Recorded DVD

Sep 29, 2012

Suddenly my pc recognizing any copied DVD/CD as blank discs and only plays originals

View 3 Replies View Related

No Sound Device Recognizing?

Apr 22, 2012

I have recently installed Win7 Ultimate on my PC - was running Vista Home Premium.Had no problems until last week. I had a BSOD, which surprised me, haven't seen one of those in a while. Major error on my part to not write down all that sais, but there it is.Now I have NO sound at all. Actually, my computer does not recognize the monitor speakers, nor does it recognize external speakers, when I tried using a pair of them instead, nor does it recognize headphones when plugged in to the jack. The computer informs me that the device is simply not plugged in - even though it IS.I have downloaded and updated every driver I can think of to no avail. So I am now at a standstill as to what to do.

[code]...

View 6 Replies View Related

Laptop Not Recognizing Printer

Apr 13, 2011

I have a new laptop, which was set up for me in the shop. Everything was working perfectly. Now however, my PC is not recognising the printer. I have previously been able to print from this laptop using the same cable, printer and USB port.

When I try to 'troubleshoot' this problem, I get a message that the printer driver is not installed. I thought Windows 7 automatically installed devices when connected via USB?

I have double checked the cable with another laptop and all is fine. I have double checked both USB ports with other devices and all is fine.

View 6 Replies View Related

Laptop Not Recognizing Windows?

Jan 29, 2013

I'm new to this site so hopefully i don't do anything wrong!! I consider myself fairly smart with computers but my laptop has gone beyond my brain At first it would just reboot itself after being on it for a little bit, I tried downloading an antivirus (avast) and it all went downhill!! Now it doesn't even recognize the windows 7, gives me a black screen telling me error and to put in disc, which I've never had one, and says: FILE CI.DLL STATUS:0XC00000E9 I cannot get it to go any farther than there,is there anyone that might be able to help?

View 2 Replies View Related

Win 7 Not Recognizing SATA Drive

Jan 1, 2010

Before I made the commitment to use Windows 7 as my primary OS, I figured I'd experiment in a dual boot environment. My current setup is Windows XP (x32) installed on a 500GB SATA drive. This drive has a partition for the OS and a separate partition for all of my files and data. To install Windows 7 I removed my SATA drive and (successfully) installed Windows 7 (64-bit) onto an 80GB IDE drive (controller 0, disk 0).

After the installation I shut down my system, reconnected my SATA drive, changed the BIOS boot order to look at my IDE and Windows 7 booted without a hitch. My motherboard is a Gigabyte GA-K8U-939

Now, with Windows 7 running and my SATA drive connected, Windows 7 does *not* recognize the drive. It is completely missing from the disk manager. I loaded the drivers for my motherboard ((however since the MoBo is a couple years old, it doesn't have Vista or Windows 7 drivers)), it loaded quasi-successfully but spat out some error about it not being totally successful. Now, after I log into Windows 7 I receive an error that goes like,

Code: Initial ALiRAID error!!Please Check:

1) ALiRAID driver is installed
2) ALiRAID controller is connected to disk drive(s)

When I reboot my computer and switch the boot order in the BIOS to boot from my IDE drive, my system will boot into Windows XP without any problem at all. I've also switched the BIOS setting from "RAID" to "IDE" for the SATA drive and that appears to have done nothing towards Windows 7 being able to access it.

There's gotta be some way to get Windows 7 to see my SATA drive, doesn't there?

View 6 Replies View Related

USB Ports Not Recognizing Any Devices

Aug 3, 2010

My usb ports are not recognising any devices. I have to delete my usb drivers completely and reinstall them and then the usb device only works 1 time.

View 9 Replies View Related

Drive Not Recognizing Blu Ray Discs

May 8, 2011

I have a Sony Vaio E-Series VPCEC1S1E with a Combi drive optiarc bc-5500-h it will play CD/DVD's but I put in a Blu Ray and it's say "Please insert disc into drive"

the driver is up to date and I have played Blu Rays for the last year but doesn't even recognize there is a disc in the drive now the computer was preinstalled with Windows 7

View 9 Replies View Related

DVD-RW Drive Not Recognizing .exe Files

Jun 25, 2011

I have a Lite-On LightScribe 24X SATA DVD+/-RW Dual Layer Drive IHAS424-98 that I recently installed on a brand new computer that I built myself. I am running win 7 64 bit. I have been having problems with auto play and I thought it might have been the drive so I ordered another drive and its doing it with that one too.

What is happening is when I insert a software CD or DVD windows typically would autoplay the setup.exe or whatever the .exe file is (depending on your autoplay settings). Well, for some reason my computer is not even seeing those files. If I browse the DVD I can open the file that way but for some reason autoplay cannot see the setup.exe file to auto start it. My Autoplay settings are all on default except the software one which is set to install. For some reason it seems that every DVD or CD I enter is recognized as a mixed content cd and the default action when double clicking the drive icon in my computer is to launch the folder with all the files in it. Also, typically if its a software cd or dvd the drive icon changes to the exe file's icon. Mine doesn't and remains the same. The name changes from DVD RW Drive (F: ) to DVD RW Drive (f: ) OFFICE12......(this is office 2007 CD). I searched google and everywhere for any similar problems but could not find any solutions. I have tried everything. And so everyone knows the CDs/DVDs I run all have the autorun.inf file

View 2 Replies View Related

PC Not Recognizing External Drive?

Jul 15, 2011

i have a 1Tb external Drive (USB) and its never had any problems until now. I just recently reinstalled windows and when I try plugging in my external drive and then powering it on. My PC doesn't recognize it. I know that it knows its plugged in because it is showing up in Device manager and it is showing up as the "Safely remove usb" in the task bar.

View 7 Replies View Related

Windows 7 64 Not Recognizing All RAM In Laptop

Jul 23, 2011

I've been searching the forums for a solution to this and I don't know what to do: [code] so according to the MOBO spec, I could have 8Gb ram.I bought 2x 4GB Corsair memory.I have made sure that the memory chips are seated correctly BIOS detects that there is 8GB of RAM installed here is the system report on the RAM: Installed Physical Memory (RAM)8.00 GB Total Physical Memory3.93 GB Available Physical Memory2.22 GB basically my system is detecting but not using one of the RAM chips.I don't have a setting in BIOS to map memory.I can't get to the motherboard to adjust any jumper/ voltage settings CPU-Z shows both chips installed and working.I am running windows 64bit been into MSCONFIG and maximum memory is unchecked and this is where all my efforts have now run out. so I don't get it. 8Gb installed, 4Gb available?

View 6 Replies View Related

Windows 7 32 Bit Not Recognizing Ram Upgrade

Jan 22, 2013

i decided to upgrade my laptop from 3gb ddr3 of ram to 8 gb ddr3 , now i faced an odd problem where i got to realize that despite windows recognizing all 8 gbs of ram in system information (msinfo32) under "Installed Physical Memory" i realized that both system information and task manager shows "Total Physical Memory" to be 2.93 gb , i searched the forum throughly up till i came across this thread : Memory - Set Maximum Amount Used by Windows 7 now i got to realize that 32 bit windows can only handle 4gb of ram . now trying to sort my options i have a few questions i need to be adressed :

1 - is it smooth to upgrade from 32bit to 64bit of windows , i have heaps of programs installed over years that i cant risk to lose nor have the time to reinstall if i took the fresh installation option :/ if possible then how ? any specific tool or windows version ?

2 - any known porting , utilities or hacks that were made to make 32bit os recognize all 8gb ram ?

3 - if non of the above were valid , if i am to work with only 4 gb , why does my system read only 2.93 gb of which ? i can notice it sums up all spare 5 gb as "Hardware Reserved" . i investigated to see if the extra 1 gb is reserved by graphics card but only to find that my graphics card is only up to 750 mb of shared memory and those already are shared from "Total Physical Memory" and not hardware reserve , why i have access to only 3 of the 4 gbs of rams i'm allowed ?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved