"One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. I have 4 USB ports in the back which are connected to my printer, mouse, keyboard and external hard drive which are all functioning fine.
I have two USB ports on the front which are unoccupied. I have an internal memory card reader in this desktop, and that's the only thing I think it can be.
To resolve the problem it is asking me to reconnect the device or replace it. I have disconnected and reconnected th memory card reader while the pc was on, the pc recognizes a device has been disconnected and reconnected, but not what it is.
Under device manager, it says, "Windows has stopped this device because it has reported problems. (Code 43)" I have therefore disabled it for now, but would like to get it working. Do you think this problem wil be fixed automatically in an update sometime.
When I go to driver details, it says "No driver files are required or have been loaded for this device" And when I click on update driver, it says I have the latest driver.
I have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.
I have a multi-function card reader installed in my computer and it will not read any of the flash cards I have, this card reader has USB connection on the front which works fine. I am attaching a screen shot it is the generic USB Hub right under Universal Serial Bus controllers that is the cause of this problem. As you can see the the Sony cam USB device on this hub is working fine, but I cannot plug in any CF Flash XD or SD or MS flash card to the reader they are not seen. I have disabled the reader restarted the computer no luck. I am sure it is a realtek card reader I have tried installing latest driver from realtek with no luck. This was working fine in the past in fact the realtek drivers also worked and showed up in device manager.
I have/had a HP Pavilion P6510f and the mobo died. I replaced it with a Gigabyte 880GM-UD2H and now I can't get my internal card reader to be recognized. It's a 5 pin and I have plugged it into the empty FUSB slot and still not being recognized.In device manager, it doesn't show and the only issue is an ethernet card.I can't seem to figure out what to do to get it to work...
I have a 3.5" slot reader setup that after 2 years still wont load drivers. Supposedly this is a windows 7 PnP item but its never worked. EVERY tech I've ever talked to says its PnP so I replaced it with a new item thinking that'd fix it. Same thing. No update from the MOBO driver site either.
I have a Dell XPS M1710 laptop. I recently installed windows 7 home premium 64bit. I can't seem to get my built in Ricoh 5 in 1 memory card reader to work. I installed the recommended driver using the dell drivers on their website. None of the drives are appearing under my computer, and nothing happens when I insert a memory card. I have tried several 1 and 2gb cards. Both high speed and regular with no success. I went to folder options and unchecked the box to hide empty drives in my computer. I am unable to locate anything under device manager for the Ricoh card reader.A - I want it to display the empty drives in my computer B - I want it to read my darn memory cards
My USB ports and memory card reader have all of a sudden stopped working correctly . the mem card slots i cant tell if they are working at all but the usb ports are still sending power as iv still be able to charge my mp3 player but it just will not send any data .. this is made even more frustrating as i was using them both less that 10 hours ago iv not installed any new software and i have not changed any hardware so tbh im completely at a loss as to why they arnt working .iv done only the basic things to attempt to get them working again.. i un-installed them from device manager and let windows re-install them to no avail . I also went in to my bios and made sure that the ports were enabled .. they were
I just upgraded to Windows 7 on my notebook and installed latest version of authentec fingerprint drivers. After installation, I notice that there is TrueSuite 2.0 fingerprint software included with the drivers, which is made by authentec also, and it can read fingerprints fine and log me into windows too. But when I install digitalpersona 4.0.1, it complaints that the fingerprint reader is not attached. Only if TrueSuite could log me into website as well using fingerprints, I wouldn't even bother about DigitalPersona, but since its only for logging into windows, i want to get DP working. Is someone else facing similar problem with DP not working with Authectec reader on Windows 7 so far?
Earlier today I uninstalled a small utility off of the system disc ("C" ) and immediately my Windows 7 system would no longer recognize my other two internal HDD's. Upon a restart, Windows again sees that there are drives there but has issues. At first I thought none of the programs would run, but upon starting Starcraft 2, I watched the sc2.exe file in take manager tick up the megs resident in memory. It took about 7 minutes before reaching 100 megs in memory then the screen went black as if the game was about to start up. At this point I'm watching on my second monitor (w/ task manager) the program loaded a full 125megs before slowing down.
I was never able to get it to start up and it does this every time. The same is true for any other program installed on that drive. I can browse it just fine and everything is where it should be -- I've tried running the .exe from the directory itself with the same result.I'm no Guru, but I'm fairly good with computers and have never seen anything even remotely close to this. I don't know if the uninstall is related, but it seems likely as it was right as that finished.
Well first of all i have a dell Vostro 3400 with Windows 7 Pro 32 bit. The problem is that i have had Bluetooth since always and worked perfectly, but yesterday I tried using it after sometime to conect my cellphone and i couldn't, i went to see inside the bluetooth what the problem was and the program just don't start. Its weird the bluetooth doesn't appear on the device manager at all, so i thought that maybe the driver got somehow uninstalled or it needed to reinstall, so i downloaded it and tried to reinstall it and an error came out claiming that i do not have a Bluetooth device and i couldnt install it. Also i think its important to point that the Bluetooth light above the keyboard is on.
I have an Acer Aspire One Nav 50 with windows 7 starter 32 bit. I recently did something stupid and ended up having to completely re-install windows.The Wireless works sometimes but it usually is not working. It basically seems like it is turned off, it shows that there are no networks available even though there are. I have used Device Manager to update the drivers a few times. I also deleted the drivers and let them re-install like that. It is an Atheros AR5B93.The internal SD card doesn't work at all. When i put a card in nothing happens and it doesn't show up in "Computer". But When i have a card in it and go to device manager it shows up under "Other Device" (something like that) and the number UB6250. I've tried updating the drivers for every USB Device that shows up in device manager.Everything works ok except the wireless and the internal SD reader. I had no problems with them before the reinstall of windows. The normal USB ports work fine. Windows is at SP1.
I have built them formatted them, fixed them added components many many times...This is my issue, Internet explore won't open....well it opens and I get a ap crash notification. I take out both of my different videos cards and use internal video and it does not crash. The problem is this is my living room movie file player and the video cards make a huge difference....I also need explorer as well....now Chrome works but that is not what I want..
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
A card that i got installed recently it installed fine after start up but is not letting me install or even recognizing any hardware i plug into it. It might be a dodge driver that was intalled but ive uninstalled a few times and windows 7 doesnt even ask me after boot up for a installer it just searches the net and installs by itself. I need to get this fixed fast as i have lots of hardware i want to connect with it.
Windows 7 not reconigzing my Graphics Card. My taskbar is not functioning properly along with a lot of Windows 7's new graphic features. My drivers won't install properly, or they will and nothing will happen or it will ask me if I want to replace files.. and I do and still nothing works.
i have installed Microsoft Midtown Madness on my windows 7 PC but it does not recognize my graphics card. This game worked on windows XP but i Upgraded To Windows 7 and now it wont so the graphics are running on software not hardware. i have the same hardware as before and it all is compatible with windows 7. my graphics card shows up in other games but no this one.
Okay so I just install windows 7 32bit(clean install, not upgrade) and it's not recognizing my graphics card. All it says is "Standard VGA adapter".
I've tried installing drivers but it never works and I also tried uninstalling the standard vga adapter via device manager too but it reinstalled itself. Btw my graphics card is a ATI Radeon xpress 200.
Way back when windows 7 was in beta and i was a beta tester everything worked fine.
When I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.
im running an evga sli 58x, and windows 7 64bit 7077
i have the RC1 version of windows 7 but i hate to install that and as i have all my games and everything id have to reinstall with it(major pain) plus im not even sure if that would fix my problem
anyways when i plug my card reader in i can't access it at all, it does show up in device manager but it says drivers not installed. I don't think they make this card reader anymore and there would be drivers floating around for a card reader, so what are my choices?