Internal SD Reader And WIFI Adapter Not Working After Windows 7 Reinstall
Apr 3, 2012
I have an Acer Aspire One Nav 50 with windows 7 starter 32 bit. I recently did something stupid and ended up having to completely re-install windows.The Wireless works sometimes but it usually is not working. It basically seems like it is turned off, it shows that there are no networks available even though there are. I have used Device Manager to update the drivers a few times. I also deleted the drivers and let them re-install like that. It is an Atheros AR5B93.The internal SD card doesn't work at all. When i put a card in nothing happens and it doesn't show up in "Computer". But When i have a card in it and go to device manager it shows up under "Other Device" (something like that) and the number UB6250. I've tried updating the drivers for every USB Device that shows up in device manager.Everything works ok except the wireless and the internal SD reader. I had no problems with them before the reinstall of windows. The normal USB ports work fine. Windows is at SP1.
My desktop computer loses connection regularly and I cannot locate as to why. I have many other devices throughout the house at various locations which maintain a connection fine. When the connection drops it still displays I am connected, but there is clearly no connectivity.
I've tried toggling between two devices, one an eternal PCI adapter and the other a USB adapter. I get interruptions on both, so my conclusion is there must be a setting causing this. The desktop has been moved to other locations just in case of interference, and I've tried channel swapping as well.
My grandson is getting ready to enter his senior year of high school. They have been given the Aspire 3830-T TimelineX with Windows 7 Professional installed on it.
He is not supposed to download any programs on this notebook, but he did. So, he went into the control panel and uninstalled some things. Included in this was something called Babylon and also his Atheros wifi adapter. He has tried system restore and it will not work at all.
I went to look at the system recovery and it doesn't go back to the date he did this, nor before. So, I don't know how to reinstall this for him and get him back onto wireless.
I have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.
my above device is not working properly as per report .i had updated the divice driver ,tryied manuall install dell's driver but all are useless, its stil not working i think.
I installed Build 7057, and my Dynex Enhanced Wireless-G USB Adapter (DX-EBUSB) won't work. The problem started with the device just ceasing to work after 5-10 minutes of use. I uninstalled and "reinstalled" the drivers, and there's still no luck.
The device can detect my Router, but it won't connect to it. I get the "limited access" popup. Something else to note is that during the driver installation, it gives a "Please plug in the device to a USB port" message, although it won't recognize the plugged-in device. Weird, eh?
This is weird, since I was able to DL the 64-bit driver for Vista/Windows 7 Build 7000, and it would work.
I have a multi-function card reader installed in my computer and it will not read any of the flash cards I have, this card reader has USB connection on the front which works fine. I am attaching a screen shot it is the generic USB Hub right under Universal Serial Bus controllers that is the cause of this problem. As you can see the the Sony cam USB device on this hub is working fine, but I cannot plug in any CF Flash XD or SD or MS flash card to the reader they are not seen. I have disabled the reader restarted the computer no luck. I am sure it is a realtek card reader I have tried installing latest driver from realtek with no luck. This was working fine in the past in fact the realtek drivers also worked and showed up in device manager.
I have/had a HP Pavilion P6510f and the mobo died. I replaced it with a Gigabyte 880GM-UD2H and now I can't get my internal card reader to be recognized. It's a 5 pin and I have plugged it into the empty FUSB slot and still not being recognized.In device manager, it doesn't show and the only issue is an ethernet card.I can't seem to figure out what to do to get it to work...
"One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. I have 4 USB ports in the back which are connected to my printer, mouse, keyboard and external hard drive which are all functioning fine.
I have two USB ports on the front which are unoccupied. I have an internal memory card reader in this desktop, and that's the only thing I think it can be.
To resolve the problem it is asking me to reconnect the device or replace it. I have disconnected and reconnected th memory card reader while the pc was on, the pc recognizes a device has been disconnected and reconnected, but not what it is.
Under device manager, it says, "Windows has stopped this device because it has reported problems. (Code 43)" I have therefore disabled it for now, but would like to get it working. Do you think this problem wil be fixed automatically in an update sometime.
When I go to driver details, it says "No driver files are required or have been loaded for this device" And when I click on update driver, it says I have the latest driver.
I have a 3.5" slot reader setup that after 2 years still wont load drivers. Supposedly this is a windows 7 PnP item but its never worked. EVERY tech I've ever talked to says its PnP so I replaced it with a new item thinking that'd fix it. Same thing. No update from the MOBO driver site either.
I'm also using two devices, a D-Link Dir 600 and an EnGenius ECB3500 as a repeater bridge. Do I have to take that into consideration when buying a wireless card?
my webcam is not recognized, its an internal webcam for Hp pavilion g4 windows 7 homepremium 64 bit. tried evrythn updating the system and drivers and restoring but still it bot recognized when try using the youcam nor skype for the webcam. curious abt the usb thng uninstalling all usb frm the device manager what of this that is interial will it reinstall after restarting cause i restated the notebook but still not recognized and all.
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
I've googled this and found heaps of people having the same issue, but nothing that actually resolves it. I'm using a laptop with internal wifi but I also have an external wifi dongle as I connect to my neighbours internet (I have permission and the passwords, etc). Both the internal and external used to work fine and both would have internet connection. But something recently has changed and now the internal wifi still works with both network and internet connection, but the external one only has network connection and no internet connection.The reason I use the external one is it gives much better signal strength than the internal one and, as said, both used to work just fine.Now I've tried uninstalling the external drivers and dongle and reinstalling it but no dice. I've tried doing the netsh stuff people have recommended in some of the search pages but no dice. Tried release and renew of IP, but no dice. I've disabled all firewalls but no dice (and I figure the firewalls would stop both connections anyway but I thought I'd try it
I've looked around some, but most other people's problems seemed to be that they could at least see a grayed out version of the card or locate it in the Device Manager, but absolutely nothing shows up for me. It worked fine a couple of days ago (when I was still on Vista), but after upgrading to 7, it no longer detects the SD card at all. Other topics had lots of random driver downloads, but the ones I tried did not seem to work.
flash drive or any card reader is perfectly working in windowx xp but when i insert in my windows 7 it show drive is not formated .
then I formated on windows 7 it works but when i restart windows 7 it again show flash drive is not formmated . every time i restart windows 7 it does not open flash drive or any card reader and show drive is not formated . at the same time when i boot in windows xp they all work perfectly in windows xp . what to do within windows 7
I have an older HP Pavilion zt3349cl that just keeps going. I installed Windows 7 on it and now when I put a sd card in the reader(built in) it wants to try and format the card-the card has pics on it. Card will work fine in another computer.
First of all every time I am logged on to my WIFI at home, after a couple of hours, I get told that I am loged on to two WIFI networks (A and B), whilst I only get one set of bars in my statusdisplay (bottom right). When I switch off WIFI, network centre keeps telling me I am loged on to WFI B. A is the SSID and B is the typenumber of teh router I have, so there is only one WIFI signal. Secondly, after being logged on to my home WIFI, All activity seizes, I can not load pages, check e-mail, or anything. I can access my router and it tells me everything is ok, but packages seem to come to a halt. My PS3 can be online, so the problem is in my laptop I think. I have tried releasing and renewing my IP and resetting my router, but only rebooting my laptop helps.
I just bought my laptop, a new toshiba satellite with windows 7 and 64 bit, i tried to install assasins creed 3, but gave me error about "feature transfer error component sound_sfx filedata2.cab error data error (cyclic redundancy check)", i thought it was a game error, but then i realized my dvd reader stops working, i tried to copy the files from the dvd and it stoped working after a while also (it happened with abother DVD too when tried to copy the file to my computer). So i was wondering what can i do
Windows 7 sees the adapter right off the bat names it right but does not install drivers for it.
So I tried to use some hacked buffalo drivers that lets me create a softAP and open the adapter up to all devices. -on XP sp2
Seems the drivers are not valid for vista 64bit / Windows 7
So I tried the latest drivers from Nintendo 1.7 and still no luck I try to run the software it says no drivers for my OS and I try to install it manually in DevMang.
I'm having this problem for last one week, after boot my computer just freezes. When I boot without USB Wifi Adapter the computer runs okay. I have 2 different Wifi Adapters, with both of them its the same problem I followed this thread [Solved] USB devices freeze computer - Gigabyte - Motherboards-Memory , and disabled usb legacy support. the computer ran fine with USB adapter after that (last night) but today morning again its freezing.Problem started with TP-Link wifi adapter, now i'm using Linksys Wifi Adapter
I am normally connected to the internet through a wired connection but the wireless adapter on my pc..is always on and searching.My concern is can someone snoop into my pc through the wireless adapter even if it is not connected to a network.
I have an HP Pavilion g series computer. My web internal web cam has stopped working. When I go onto YouCam it keeps coming up with a message saying no web cam was detected. My knowledge on the workings of a computer are very limited.
I upgraded from window 7 home basic to windows 7 ultimate now the wireless network adapter had deleted is there a link to reinstall so i could connect wireless?
My fingerprint reader randomly stopped working a few days ago. I first noticed it when trying to log on to my computer because the reader doesn't respond at all and now it doesn't even give me the fingerprint reader option when it comes to the welcome screen.
