I installed Build 7057, and my Dynex Enhanced Wireless-G USB Adapter (DX-EBUSB) won't work. The problem started with the device just ceasing to work after 5-10 minutes of use. I uninstalled and "reinstalled" the drivers, and there's still no luck.
The device can detect my Router, but it won't connect to it. I get the "limited access" popup. Something else to note is that during the driver installation, it gives a "Please plug in the device to a USB port" message, although it won't recognize the plugged-in device. Weird, eh?
This is weird, since I was able to DL the 64-bit driver for Vista/Windows 7 Build 7000, and it would work.
my above device is not working properly as per report .i had updated the divice driver ,tryied manuall install dell's driver but all are useless, its stil not working i think.
I have an Acer Aspire One Nav 50 with windows 7 starter 32 bit. I recently did something stupid and ended up having to completely re-install windows.The Wireless works sometimes but it usually is not working. It basically seems like it is turned off, it shows that there are no networks available even though there are. I have used Device Manager to update the drivers a few times. I also deleted the drivers and let them re-install like that. It is an Atheros AR5B93.The internal SD card doesn't work at all. When i put a card in nothing happens and it doesn't show up in "Computer". But When i have a card in it and go to device manager it shows up under "Other Device" (something like that) and the number UB6250. I've tried updating the drivers for every USB Device that shows up in device manager.Everything works ok except the wireless and the internal SD reader. I had no problems with them before the reinstall of windows. The normal USB ports work fine. Windows is at SP1.
I have a Dynex Wireless 11G Desktop Card Model: Dx-WGDTC and I cannot seem to find the right drivers to get this card to work. Windows find's the card but will not automatically install it with a generic driver. I am running 64bit home premium.
Windows 7 sees the adapter right off the bat names it right but does not install drivers for it.
So I tried to use some hacked buffalo drivers that lets me create a softAP and open the adapter up to all devices. -on XP sp2
Seems the drivers are not valid for vista 64bit / Windows 7
So I tried the latest drivers from Nintendo 1.7 and still no luck I try to run the software it says no drivers for my OS and I try to install it manually in DevMang.
I'm having this problem for last one week, after boot my computer just freezes. When I boot without USB Wifi Adapter the computer runs okay. I have 2 different Wifi Adapters, with both of them its the same problem I followed this thread [Solved] USB devices freeze computer - Gigabyte - Motherboards-Memory , and disabled usb legacy support. the computer ran fine with USB adapter after that (last night) but today morning again its freezing.Problem started with TP-Link wifi adapter, now i'm using Linksys Wifi Adapter
I am normally connected to the internet through a wired connection but the wireless adapter on my pc..is always on and searching.My concern is can someone snoop into my pc through the wireless adapter even if it is not connected to a network.
I'm using the Atheros AR5007 802.11b/g WiFi Adapter and the specs of this adapter say that I should get speeds up to 54 Mbps. I'm only getting to 16 Mbps even though the speed in the connection status says 54. I have used it with 2 different wifi routers (Linksys and Asus),with 2 different IPS and with both the actuall speed will not go over 16 Mbps. If i connect using a cable to those routers I get speeds way over 54 Mbps.
I have the latest Windows 7 x64 drivers from windows update. Does anyone have any ideea if there is anything wrong with my card or this is there a way to speed it up ?
My grandson is getting ready to enter his senior year of high school. They have been given the Aspire 3830-T TimelineX with Windows 7 Professional installed on it.
He is not supposed to download any programs on this notebook, but he did. So, he went into the control panel and uninstalled some things. Included in this was something called Babylon and also his Atheros wifi adapter. He has tried system restore and it will not work at all.
I went to look at the system recovery and it doesn't go back to the date he did this, nor before. So, I don't know how to reinstall this for him and get him back onto wireless.
Starting last night my Dlink DWA-130 is causing all of my rear usb ports to not work. If I plug it into the front the computer doesn't even recognize it. I have tried using different ports on the back with the same result. I have even reinstalled Windows and the problem is still there.
Not Sure if this helps but... My Computer: mobo: AsRock 970 Extreme 3 processor: Fx 4100 gpu: Radeon hd 6570 PSU: Inland Silver Series ILS-600-2 600 Watt OS:Windows 7 Ultimate x64
My adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. Went from Corsair xms3 to G.Skill Ripjaws.
I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy.
I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have case fans that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1.
Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting i'm missing because i'm sure it was working with my last set of ram.
i am using internet through a wireless wired connection which means on roof top i have got a WiFi antenna and from there a wire is connected to my laptop well my query is that i stay near to my college which grants us access to free internet but my laptop wifi or any other usb adapter is not capable of catching that wifi signal so i wanted to know is there any way that i can configure my wifi antenna to catch my college signal if no please help in getting a way so that i can connect through my college WiFi signal as my college WiFi gives great speed and the plan i am subscribed to is like shit i pay for 1mbps plan but i get max downloading speed upto 150kbps.
My desktop computer loses connection regularly and I cannot locate as to why. I have many other devices throughout the house at various locations which maintain a connection fine. When the connection drops it still displays I am connected, but there is clearly no connectivity.
I've tried toggling between two devices, one an eternal PCI adapter and the other a USB adapter. I get interruptions on both, so my conclusion is there must be a setting causing this. The desktop has been moved to other locations just in case of interference, and I've tried channel swapping as well.
Missing wifi adapter Drivers on Aspire one D255E How do i fix this adapter I'm Running windows 7 starter 32 bit . I'm pretty Confident this is reason why its failed me " A friend asked me to disable my wifi for a bit '' interfering with there laptop wifi connection '' I disable the wifi adapter for and hour.. When i went to re enable it, Surprise It disappeared !. I Tried everything I no to get back on line with having no access to net but no luck. I've ran a few different troubleshooters 5 times but its keeps on obviously giving me the same results '' network problem Missing Network Adapter or check Ethernet cord !
I may be female an 20 yrs old and Not to intellectual yett!!! when its comes to Laptop drivers but I am a fast learner . I also Can only save the driver on Usb memory stick and then install It ill still boot of the usb right?? i no dumb question and reason why obvious cannot get on net and the only reason i have access right now is cause i have Linux an windows 7 on my Net Book so..
I've been away from the PC world for the past few years because I've been running a Mac.I decided to get back into some gaming on picked up a Dell XPS desktop running windows 7 ultimate x64.I bought a Asus USB N10 Wifi Adapter and it won't connect to the internet. It gets a limited activity logo over top of the connection. Today I tried plugging it rite into the router with a LAN cable and still, no dice. Came up with an IP address error.I'm guessing this is a router issue? When i run ipconfig in cmd prompt, it doesn't even have a default gateway?
I'm trying to create a virtual wifi AP using the Microsoft Virtual Wifi Miniport Adapter and the netsh wlan command line context, but it's giving me a headache."netsh wlan show drivers" in the command line includes the output line "Hosted network supported: Yes" so my wireless card should be supported, correct? I can setup the hostednetwork fine with "netsh wlan set hostednetwork mode=allow ssid=blah key=blah" but when I try to start it with "netsh wlan start hostednetwork" I get the following output:"The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation."My network adapter is a Rosewill RNX-N1 which contains a Ralink 2870 chipset (that chipset has been confirmed to support hostednetwork).
I was searchn on the net for Dell Inspiron 1501 help.
Subject of help needed: Dell Inspiron 1501 onboard wifi card not working with Windows 7 Ultimate and NEED help getting a working driver.
I have a Dell Inspiron 1501 currently using XP w/SP3 as I'm typing now.
I have made a Acronis backup image of my Dell 1501 laptop so I can quickly within 30 min.s pop back my Windows 7 Ultimate back on when I can either find and get a Dell Inspiron 1501 onboard wifi driver that works OR buy a 100% sure Windows 7 USB wireless adapter with driver.
I have freshly formatted hd and fresh full install of Windows 7 Ultimate and seems to load and work great BUT.....
I went to Dell support / Driver download website page and I entered in our Dell Service Tag number and in the drag box, they are NO Windows 7. So, I'm guessing they do not support and offer a Windows 7 driver for my onboard wifi card?
I currently have stinky dialup internet and live in a rurual country area but sometimes go up in town to visit a spot that has cable wifi connection. My onboard wifi card with XP works great.. I have installed Vista and the drive for my onboard wifi card works fine.
I went in to town to connection to cable with wireless router high speed connection to get Windows 7 updates but this onboard wifi card seems to recieve and reports wifi signals fine but trying to get it to connect and go is another. I have tried many many different wifi signals and areas and this onboard wifi card with Windows 7 does not want to work. I'm guessing it needs a Windows 7 driver. Do you think its not working cause of the driver too?
I need help finding out if they are anyone else with a Dell Inspiron 1501 have Windows 7 and have they found a Windows 7 driver work?
If I wanted to buy a 100% sure best range hottest USB wireless adapter coming with Windows 7 driver, what Name and Model would you recommend?
I have a Gateway FX series 17" laptop and yesterday when I got home from university and took the computer out of my bag to start working, the wireless card just didnt exist, no networks were recognized and when i tried to troubleshoot it told me that no device was connected. Wired internet works just fine. And the wireless card appears in the device manager.
First of all every time I am logged on to my WIFI at home, after a couple of hours, I get told that I am loged on to two WIFI networks (A and B), whilst I only get one set of bars in my statusdisplay (bottom right). When I switch off WIFI, network centre keeps telling me I am loged on to WFI B. A is the SSID and B is the typenumber of teh router I have, so there is only one WIFI signal. Secondly, after being logged on to my home WIFI, All activity seizes, I can not load pages, check e-mail, or anything. I can access my router and it tells me everything is ok, but packages seem to come to a halt. My PS3 can be online, so the problem is in my laptop I think. I have tried releasing and renewing my IP and resetting my router, but only rebooting my laptop helps.
Does anyone know if thare is a Dynex wirless g driver that works with build 7000 64 bit? The driver on the disk says it doesen't work with 64 bit and the one I downloaded from the link below installs but nothing happens when I try to run it and it says it is running in the processes tab in task manager though.
I've tried installing it in compatiblity mode and runing it in compatability mode with no luck.
Dynex :: Products For Your Digital Life - Dynex Enhanced Wireless-G USB 2.0 Network Adapter.
I have a Dynex wgdtc pci card and im wondering if its compatible with windows 7. I tried installing the software for the card in windows 7 (vmware) in Linux and it didn't work. That may be a vmware problem but I'm not sure. Also can you check my computer specs and tell me if I can use windows 7?
I am having networking issues with Windows 7 Pro. I did a clean install on Saturday from Windows XP and started having issues staying/getting connected to the internet with my motherboard's (ASUS A8NVM-CSM) on board Nvidia nForce networking controller. After seeing that others were having the same problem, I bought a new card, Dynex Gigabit PCI Card which installed perfectly and disabled the other one. Now I'm running into issues of my connection dropping sometimes every 5, 10, 20 minutes and the only way to get it back instantly is to do ipconfig /renew.
When I do the troubleshooter, it tells me there's something wrong with the connectivity of my modem or router, which is impossible. I say this because I live with roommates who are all using different operating systems (Vista, XP, Mac OS X Leopard) and they haven't had connection problems either. There are two routers in the house, a Netgear and a Cisco, and I haven't a problems with either of those when I was on XP, and my roommates aren't having issues with it either.
Any ideas or settings I might be able to change on this card? I've tried drivers and changing cables out, making sure Windows doesn't turn off the network card to save power...etc. Let me know if you need more information.
My cable company said my wireless adapter on my laptop does not work and isn't picking up a signal. They believe I may need to reinstall the wireless driver. I have a hp G60-535-dx and I recently updated Windows 7 and don't know if that caused the problem. My other laptop is a windows Vista and will connect to the internet and they both share a wireless router, however the windows 7 laptop will not connect to the internet. What is the best way to solve this problem?
