I have/had a HP Pavilion P6510f and the mobo died. I replaced it with a Gigabyte 880GM-UD2H and now I can't get my internal card reader to be recognized. It's a 5 pin and I have plugged it into the empty FUSB slot and still not being recognized.In device manager, it doesn't show and the only issue is an ethernet card.I can't seem to figure out what to do to get it to work...
I have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.
I have a 3.5" slot reader setup that after 2 years still wont load drivers. Supposedly this is a windows 7 PnP item but its never worked. EVERY tech I've ever talked to says its PnP so I replaced it with a new item thinking that'd fix it. Same thing. No update from the MOBO driver site either.
I have a multi-function card reader installed in my computer and it will not read any of the flash cards I have, this card reader has USB connection on the front which works fine. I am attaching a screen shot it is the generic USB Hub right under Universal Serial Bus controllers that is the cause of this problem. As you can see the the Sony cam USB device on this hub is working fine, but I cannot plug in any CF Flash XD or SD or MS flash card to the reader they are not seen. I have disabled the reader restarted the computer no luck. I am sure it is a realtek card reader I have tried installing latest driver from realtek with no luck. This was working fine in the past in fact the realtek drivers also worked and showed up in device manager.
"One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. I have 4 USB ports in the back which are connected to my printer, mouse, keyboard and external hard drive which are all functioning fine.
I have two USB ports on the front which are unoccupied. I have an internal memory card reader in this desktop, and that's the only thing I think it can be.
To resolve the problem it is asking me to reconnect the device or replace it. I have disconnected and reconnected th memory card reader while the pc was on, the pc recognizes a device has been disconnected and reconnected, but not what it is.
Under device manager, it says, "Windows has stopped this device because it has reported problems. (Code 43)" I have therefore disabled it for now, but would like to get it working. Do you think this problem wil be fixed automatically in an update sometime.
When I go to driver details, it says "No driver files are required or have been loaded for this device" And when I click on update driver, it says I have the latest driver.
I have an Acer Aspire 5051 on Windows 7 Ultimate 64-Bit... all drivers are installed apart from the 5-in-1 xD Card Reader...now I know theres a 64-Bit driver somewhere cos I had it on 64-Bit vista sometime ago.... I just never kept track of it?
i bought a multi card reader and tried using it on Winodws 64-bit sony vaio laptop but it does not work.which provided the driver software for windows 7 64-bit. It worked for me.
I just recently changed / did format my OS from Vista to Windows 7. All drivers were working in Vista but When I had WIndows 7, My audio driver and Built in SD card/flash reader is not functioning. I was able to find the realtek driver for windows 7 for the audio problem and it worked fine. Now my SD/flash card reader is still not functioning.I tried to use automatic search using windows for the driver but I was not able to find it.I have Toshiba Satellite Pro M200 (core duo, 2G RAM, 32Bit)
Up until now I've never used the SD Card reader in my laptop, but now I want to use it however it's not showing up under My Computer. I have downloaded the 'MS Hotfix MemoryCard' listed under Software (which only appears for WinXP) here: Support for NP-R519
But when I try to install (Running as Administrator), the command prompt flashes for a second then nothing happens. I've tried restarting anyway in case it had installed but my SD card is still not recognised. I've also tried running in compatibility mode with WinXP SP2 and Vista SP2 - no luck.
This card reader apparently is SDHC compatible, but my card is only 2GB anyway so its 100% compatible. I've done a google search and it seems a lot of people have problems with this one particular device/driver.
Also I've looked under Device Manager but I'm not sure where it would be listed, though I'm confident its actually not listed at all.
So what should I try next? I'd rather get it working than have to buy an adapter.
I am having trouble installing a card reader driver on my Acer Aspire 5050.The memory card reader is ENE CB714 Cardbus/MediaReader Controller. The ENE Technology website has no links or downloads for their drivers.After clicking Extract Here, there are no 'instructions'. I cannot seem to 'unzip the files. There is also no 'install file' that shows up. I have followed the steps and they are simply not working.I am trying to use my Sony CyberShot camera in my USB ports. I have gone to the Sony website and there was a driver available that would not install.I have tried a lot of methods and cannot seem to get this working!how I can download and install this driver?
Notebook model no : VGN-FZ24OE..After installing windows 7 the SD card reader slot is not working.Plz give me the link to download the SD card reader driver...
I just upgrade my comp.to windows 7 evrything it's working fine but the mass storage controller no drivers for it.Some one told me that the driver for win. vista were compatible with win.7 I try to load it but the comp don't let me.It said no compatible.It's anyone out there with the same problem?
I have an Acer Aspire One Nav 50 with windows 7 starter 32 bit. I recently did something stupid and ended up having to completely re-install windows.The Wireless works sometimes but it usually is not working. It basically seems like it is turned off, it shows that there are no networks available even though there are. I have used Device Manager to update the drivers a few times. I also deleted the drivers and let them re-install like that. It is an Atheros AR5B93.The internal SD card doesn't work at all. When i put a card in nothing happens and it doesn't show up in "Computer". But When i have a card in it and go to device manager it shows up under "Other Device" (something like that) and the number UB6250. I've tried updating the drivers for every USB Device that shows up in device manager.Everything works ok except the wireless and the internal SD reader. I had no problems with them before the reinstall of windows. The normal USB ports work fine. Windows is at SP1.
I have built them formatted them, fixed them added components many many times...This is my issue, Internet explore won't open....well it opens and I get a ap crash notification. I take out both of my different videos cards and use internal video and it does not crash. The problem is this is my living room movie file player and the video cards make a huge difference....I also need explorer as well....now Chrome works but that is not what I want..
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
When I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.