im running an evga sli 58x, and windows 7 64bit 7077
i have the RC1 version of windows 7 but i hate to install that and as i have all my games and everything id have to reinstall with it(major pain) plus im not even sure if that would fix my problem
anyways when i plug my card reader in i can't access it at all, it does show up in device manager but it says drivers not installed. I don't think they make this card reader anymore and there would be drivers floating around for a card reader, so what are my choices?
before i gutted it out and put all new stuff in, my computer was once an eMachines C6415. it has a built in card reader that 7 identifies, but just as a generic card reader. there are windows xp drivers for it that will give them certain icons and specify what kind of slot they are, but i can't find any for 7. they work and all, but i want them to show up in my computer with all the correct information (instead of the generic icon that just says "removable drive"). i can't find any 7 drivers for it. any help?
I own Sony Vaio VGN CR123E.I've formated my computer which came with vista and installed 7, but I found some problems with drivers:Card reader isn't working, It seems I cannot find proper drivers. I had some before reformating but It wasn't working with 0.5G and 2G SD card, but It did work with my 1G card. I need help to find proper drivers for it.USB is working much slower than in vista/linuxIntegrated webcamera isn't working.
I have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.
When I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.
I bought this Generic USB All in 1 Mini Card Reader off eBay (Some Cheap chinese thing) It worked fine on my previous setup, Windows Vista x64, and it still works on my fathers computer, Vista x64 I believe. But When I try to connect it to my current Windows 7 x64 install, it justs gives me an I/O device error, I think it might have something to do with the Device driver for Win 7 It might not be compatible, I don't know just thought somebody might have an idea if I can get it to work in Windows 7.
on my laptop (ASUS Z91N), I've got one left driver issue: the integrated memory card reader.
It's called Ricoh SD/MMC controller, the latest driver having the best behavior found is 2003-10-20 (1.4.2.9) from ASUS website for WinXP. All other drivers found does nothing, they install but when I plug the card, nothing appears in "My computer".
The problem is that when I plug a SD card, windows detects it, assigns a letter, but I am unable to open to look at the files. I get "Access denied" every time.
When I try to format, it does it with the good size detected! I tested by looking with another computer.
So, this problem is weird, I never had any issue similar to that in the past.
I'm running Windows 7 RC on HP nw8000 and I'm pretty sure the card reader worked ok on Vista Ultimate 32.
Has anyone found a driver for the built-in SD card reader? HP doesn't list anything past XP on their site, not even for Vista for this device for this notebook.
I have several internal card readers for my desktop computer. Two are Rosewill brand from NewEgg and one is RocketFish from BestBuy. They are all of the type that read SDHC, CF and a host of other cards and also have a USB port for a flash drive. They all connect to main board dual-port headers.For no reason apparent to me, the card readers still read USB flash drives but do not even acknowledge any flash memory cards at all in any manner. It is as though I did not insert one at all. I researched the 'net and found some things to try (registry edits, scanning for malware, disconnecting the power cord for several hours, etc.etc.); but, after several hours of troubleshooting, I decided I had three bad card readers. In a last act of desperation, I restored the OS to an Acronis image I made several months back and now the card readers function flawlessly,So, where in Windows 7 can I begin to look for a cause/solution to this kind of problem if it happens again? It probably will happen again as I already have an XP system where the problem has popped up with these same card readers.Additional Info: I have an external reader that functioned fine on the same systems on which the internal readers did not work.
I have a multi-function card reader installed in my computer and it will not read any of the flash cards I have, this card reader has USB connection on the front which works fine. I am attaching a screen shot it is the generic USB Hub right under Universal Serial Bus controllers that is the cause of this problem. As you can see the the Sony cam USB device on this hub is working fine, but I cannot plug in any CF Flash XD or SD or MS flash card to the reader they are not seen. I have disabled the reader restarted the computer no luck. I am sure it is a realtek card reader I have tried installing latest driver from realtek with no luck. This was working fine in the past in fact the realtek drivers also worked and showed up in device manager.
On my PC there is a card reader connected. It shows up as 4 different drives when I look at "My Computer" and elsewhere. One of the slots in the reader is for sim cards. When a sim card is inserted a Windows sound is heard and the "Installing Device Driver" window shows up and then another window stating the installation was not successful. Any further action from within windows does not solve the problem. I tried an external card reader and the same negative results. this was tried with 3 different sim cards.
I have/had a HP Pavilion P6510f and the mobo died. I replaced it with a Gigabyte 880GM-UD2H and now I can't get my internal card reader to be recognized. It's a 5 pin and I have plugged it into the empty FUSB slot and still not being recognized.In device manager, it doesn't show and the only issue is an ethernet card.I can't seem to figure out what to do to get it to work...
I have a notebook Gateway M 1617, with Realtek card reader but it doesn working with the new Windows 7 build 7100, I've tried go to realtek driver web site, downloaded the Windows 7 driver version also got the win vista version. but nothing worked for me..
This is the only major showstopper for me in using Seven 95%
ActivIdentity USB Reader V2
ActiveClient 6.1
Both work fine in Vista 64 on the same box in dual boot.
In Vista the driver used is the generic MS usbccid.sys driver version 6.0.6001.18000 dated 6/1/2006
In Seven there are 4 MS drivers all version 6.1.7000.0 dated 6/21/2006:
- scfilter.sys
- WUDFUsbccidDriver.dll
- winusb.sys
- WUDFRd.sys
In Device Manager status I get the "This device Cannot Start. (code 10)" message.
If I uninstall the device and plug it back in I can see that Windows sees an ActivCard USB reader V2 (shows up in "Other Devices" while drivers are trying to install) but the install fails for the Microsoft Usbccid smartcard Reader (WUDF). I have tried the latest drivers to no avail.