I'm running Windows 7 RC on HP nw8000 and I'm pretty sure the card reader worked ok on Vista Ultimate 32.
Has anyone found a driver for the built-in SD card reader? HP doesn't list anything past XP on their site, not even for Vista for this device for this notebook.
I have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.
View 3 Replies View Relatedcannot delete files on sdhc card in windows 7 (can read)
View 6 Replies View RelatedIF SD CARD SAYS PROTECTED CAN IT BE REVERSED
View 1 Replies View RelatedI formated the memory card first on my samsung phone but still it asks to format the memory card whenever i connect the card reader to my sony laptop.
View 1 Replies View Relatedwhen I put my micro sd hc sandisk card in my pc with the help of card reader, it says the memory card was write protected
View 2 Replies View Relatedi can't copy or paste any file on sd card because card is write protected
View 2 Replies View Relatedsun pack 72-in 1 card read wont read i phone sim card
View 1 Replies View RelatedWhen I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.
View 6 Replies View Relatedim running an evga sli 58x, and windows 7 64bit 7077
i have the RC1 version of windows 7 but i hate to install that and as i have all my games and everything id have to reinstall with it(major pain) plus im not even sure if that would fix my problem
anyways when i plug my card reader in i can't access it at all, it does show up in device manager but it says drivers not installed. I don't think they make this card reader anymore and there would be drivers floating around for a card reader, so what are my choices?
I bought this Generic USB All in 1 Mini Card Reader off eBay (Some Cheap chinese thing) It worked fine on my previous setup, Windows Vista x64, and it still works on my fathers computer, Vista x64 I believe. But When I try to connect it to my current Windows 7 x64 install, it justs gives me an I/O device error, I think it might have something to do with the Device driver for Win 7 It might not be compatible, I don't know just thought somebody might have an idea if I can get it to work in Windows 7.
View 1 Replies View Relatedon my laptop (ASUS Z91N), I've got one left driver issue: the integrated memory card reader.
It's called Ricoh SD/MMC controller, the latest driver having the best behavior found is 2003-10-20 (1.4.2.9) from ASUS website for WinXP. All other drivers found does nothing, they install but when I plug the card, nothing appears in "My computer".
The problem is that when I plug a SD card, windows detects it, assigns a letter, but I am unable to open to look at the files. I get "Access denied" every time.
When I try to format, it does it with the good size detected! I tested by looking with another computer.
So, this problem is weird, I never had any issue similar to that in the past.
Anybody here having the same problem?
when i put my card reader in to the usb the pc bleeps ,u can see the safely remove hardware but cant see whats on the card reader
View 4 Replies View RelatedI upgraded my sony vaio laptop vgn-cr131E from vista premium to windows 7 ultimate and my card reader dissappeared
View 4 Replies View RelatedHow to open the card reader,When open memory card it says format?
View 1 Replies View RelatedI have a laser multi card reader with a 2 GB CF card that has photo's on it but will not show up on my laptop
View 5 Replies View Relatedhowdo to use the card reader work.
View 2 Replies View Relatedmy computer won't read a sim card or dvd.it used to but not now. do you know what i would need?
View 1 Replies View RelatedSince I installed Windows 7 64bit from Vista 32bit my card reader is not even recognized.
More info:
Realtek RTS5158 6 in 1 card reader
Advent AIO-200
Anyone any workarounds on this issue? Hopefully with their final release problem will rectified, fingers crossed.
I have several internal card readers for my desktop computer. Two are Rosewill brand from NewEgg and one is RocketFish from BestBuy. They are all of the type that read SDHC, CF and a host of other cards and also have a USB port for a flash drive. They all connect to main board dual-port headers.For no reason apparent to me, the card readers still read USB flash drives but do not even acknowledge any flash memory cards at all in any manner. It is as though I did not insert one at all. I researched the 'net and found some things to try (registry edits, scanning for malware, disconnecting the power cord for several hours, etc.etc.); but, after several hours of troubleshooting, I decided I had three bad card readers. In a last act of desperation, I restored the OS to an Acronis image I made several months back and now the card readers function flawlessly,So, where in Windows 7 can I begin to look for a cause/solution to this kind of problem if it happens again? It probably will happen again as I already have an XP system where the problem has popped up with these same card readers.Additional Info: I have an external reader that functioned fine on the same systems on which the internal readers did not work.
View 5 Replies View RelatedI have a multi-function card reader installed in my computer and it will not read any of the flash cards I have, this card reader has USB connection on the front which works fine. I am attaching a screen shot it is the generic USB Hub right under Universal Serial Bus controllers that is the cause of this problem. As you can see the the Sony cam USB device on this hub is working fine, but I cannot plug in any CF Flash XD or SD or MS flash card to the reader they are not seen. I have disabled the reader restarted the computer no luck. I am sure it is a realtek card reader I have tried installing latest driver from realtek with no luck. This was working fine in the past in fact the realtek drivers also worked and showed up in device manager.
View 9 Replies View RelatedOn my PC there is a card reader connected. It shows up as 4 different drives when I look at "My Computer" and elsewhere. One of the slots in the reader is for sim cards. When a sim card is inserted a Windows sound is heard and the "Installing Device Driver" window shows up and then another window stating the installation was not successful. Any further action from within windows does not solve the problem. I tried an external card reader and the same negative results. this was tried with 3 different sim cards.
View 1 Replies View RelatedI have/had a HP Pavilion P6510f and the mobo died. I replaced it with a Gigabyte 880GM-UD2H and now I can't get my internal card reader to be recognized. It's a 5 pin and I have plugged it into the empty FUSB slot and still not being recognized.In device manager, it doesn't show and the only issue is an ethernet card.I can't seem to figure out what to do to get it to work...
View 4 Replies View RelatedI have a notebook Gateway M 1617, with Realtek card reader but it doesn working with the new Windows 7 build 7100, I've tried go to realtek driver web site, downloaded the Windows 7 driver version also got the win vista version. but nothing worked for me..
View 1 Replies View Relatedmy laptop is vaio type N vgn-nr72b. I cant find any sd card reader drivers.my os is windows 7 home premium 64 bit.
View 3 Replies View RelatedUSBVID_08E6&PID_3438&REV_0100
USBVID_08E6&PID_3438
windows 7 driver managerment display: smart card,no drivers
SCFILTERCID_8065a209010352
but "USB Key smart Card Reader" works fine.
This is the only major showstopper for me in using Seven 95%
ActivIdentity USB Reader V2
ActiveClient 6.1
Both work fine in Vista 64 on the same box in dual boot.
In Vista the driver used is the generic MS usbccid.sys driver version 6.0.6001.18000 dated 6/1/2006
In Seven there are 4 MS drivers all version 6.1.7000.0 dated 6/21/2006:
- scfilter.sys
- WUDFUsbccidDriver.dll
- winusb.sys
- WUDFRd.sys
In Device Manager status I get the "This device Cannot Start. (code 10)" message.
If I uninstall the device and plug it back in I can see that Windows sees an ActivCard USB reader V2 (shows up in "Other Devices" while drivers are trying to install) but the install fails for the Microsoft Usbccid smartcard Reader (WUDF). I have tried the latest drivers to no avail.
before i gutted it out and put all new stuff in, my computer was once an eMachines C6415. it has a built in card reader that 7 identifies, but just as a generic card reader. there are windows xp drivers for it that will give them certain icons and specify what kind of slot they are, but i can't find any for 7. they work and all, but i want them to show up in my computer with all the correct information (instead of the generic icon that just says "removable drive"). i can't find any 7 drivers for it. any help?
View 2 Replies View RelatedI have a Memory card reader and on the windows explorer it shows all the card slots as drives.
Is it possible for it to only show the slot that has media in (dare I say, like a mac)?
The same with my optical drives, is it possible to 'hide' them only showing when they have mounted a an item of optical media?
Or is this just pipe dreams, and only the preserve of unix based systems?
For some unknown reason, my multi card reader is not being recognised when I start up my computer. I suspect it has turned off the Auto Start. Can anyone help me please. I suspect that if I could make contact with the reader and turn it on manually all would be well.
View 3 Replies View Relatedi am trying to use a sandisk card for readyboost. But it only showed up once when downloading something like a update device driver or whatever. But it is not showing up.
View 2 Replies View Related
