For some unknown reason, my multi card reader is not being recognised when I start up my computer. I suspect it has turned off the Auto Start. Can anyone help me please. I suspect that if I could make contact with the reader and turn it on manually all would be well.
View 3 Repliesi bought a multi card reader and tried using it on Winodws 64-bit sony vaio laptop but it does not work.which provided the driver software for windows 7 64-bit. It worked for me.
View 1 Replies View RelatedI have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.
View 3 Replies View Relatedi am trying to use a sandisk card for readyboost. But it only showed up once when downloading something like a update device driver or whatever. But it is not showing up.
View 2 Replies View RelatedI've looked around some, but most other people's problems seemed to be that they could at least see a grayed out version of the card or locate it in the Device Manager, but absolutely nothing shows up for me. It worked fine a couple of days ago (when I was still on Vista), but after upgrading to 7, it no longer detects the SD card at all. Other topics had lots of random driver downloads, but the ones I tried did not seem to work.
View 9 Replies View RelatedI decided to replace my old internal card reader with the Akasa 3.5" internal 6-slot multicard reader with Superspeed USB 3.0 [AK-ICR-07U3] What I thought was going to be a 5 minute job became a bit of a headache. I've installed it and powered up the pc, it seemed to be working but then I got the message that the device could not be installed and no drivers were found. So off I go to Akasa website, I located the model and under support I found a "installation software" (even though the manual makes no mention of it and it's supposed to be "plug & Play"). I installed the driver and again it seemed to work, I was able to use my camera's memory card but when I tried to use another memory card it just froze, the reader gets stuck with the "reading light" all the time on even when I take the card out ... if I switch off the pc the card reader will still be stuck with both power and reading lights on, the only way for it to go off again is if I switch the power supply off. When I power the pc on it all looks fine until I try to actually use the card reader ... the usb port seems to be working fine though.My system is this:- Intel Core i7-2600 3.40GHz (Sandybridge) Socket LGA1155 Processor
-Integrated Intel HD2000 Graphics
-8GB Corsair DDR3
-Gigabyte GA-H61MA-D3V GEN3 Intel H61 (REV B3) Motherboard
-Windows 7 - 64bit
I've got a new Lenovo Z470 with Windows 7 32 bit.When I put an SD Card in the slot from my camera nothing happens.The card doesn't show up in My Computer.I've looked on the Lenovo website for drivers but can't find anything specific to this problem.
View 3 Replies View RelatedMy USB ports and memory card reader have all of a sudden stopped working correctly . the mem card slots i cant tell if they are working at all but the usb ports are still sending power as iv still be able to charge my mp3 player but it just will not send any data .. this is made even more frustrating as i was using them both less that 10 hours ago iv not installed any new software and i have not changed any hardware so tbh im completely at a loss as to why they arnt working .iv done only the basic things to attempt to get them working again.. i un-installed them from device manager and let windows re-install them to no avail . I also went in to my bios and made sure that the ports were enabled .. they were
View 2 Replies View RelatedSaw similar problem below but my computer is brand new (out the box today) Sony Vaio VPCEH14FM came with on board Windows 7 Home Premium 64bit. When I input my SD card, the card reader lights up briefly so its seeing it, but it is not appearing on my computer and when i try and run the extra drives nothing shows up. When I plug my mini sd into the usb port it works, but id like to figure out the actual sd slot for my camera?
View 3 Replies View RelatedI recently updated my laptop to win 7 x64 from win vista x32(which came preloaded)everything seems to ne working fine except the SD card i checked Dell drivers website for the latest drivers but they dont seem to be working..
View 1 Replies View Relatedflash drive or any card reader is perfectly working in windowx xp but when i insert in my windows 7 it show drive is not formated .
then I formated on windows 7 it works but when i restart windows 7 it again show flash drive is not formmated . every time i restart windows 7 it does not open flash drive or any card reader and show drive is not formated . at the same time when i boot in windows xp they all work perfectly in windows xp . what to do within windows 7
I have an older HP Pavilion zt3349cl that just keeps going. I installed Windows 7 on it and now when I put a sd card in the reader(built in) it wants to try and format the card-the card has pics on it. Card will work fine in another computer.
View 6 Replies View RelatedI own Sony Vaio VGN CR123E.I've formated my computer which came with vista and installed 7, but I found some problems with drivers:Card reader isn't working, It seems I cannot find proper drivers. I had some before reformating but It wasn't working with 0.5G and 2G SD card, but It did work with my 1G card. I need help to find proper drivers for it.USB is working much slower than in vista/linuxIntegrated webcamera isn't working.
View 5 Replies View Relatedcannot delete files on sdhc card in windows 7 (can read)
View 6 Replies View RelatedIF SD CARD SAYS PROTECTED CAN IT BE REVERSED
View 1 Replies View RelatedI formated the memory card first on my samsung phone but still it asks to format the memory card whenever i connect the card reader to my sony laptop.
View 1 Replies View Relatedwhen I put my micro sd hc sandisk card in my pc with the help of card reader, it says the memory card was write protected
View 2 Replies View Relatedi can't copy or paste any file on sd card because card is write protected
View 2 Replies View RelatedWIN 7 did not find the multi-card reader on my Gateway laptop. Does anyone know how to get a driver for this 4 year ols PC?
View 2 Replies View Relatedhow does the multi display graphics card work
View 1 Replies View Relatedsun pack 72-in 1 card read wont read i phone sim card
View 1 Replies View RelatedWhen I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.
View 6 Replies View Relatedim running an evga sli 58x, and windows 7 64bit 7077
i have the RC1 version of windows 7 but i hate to install that and as i have all my games and everything id have to reinstall with it(major pain) plus im not even sure if that would fix my problem
anyways when i plug my card reader in i can't access it at all, it does show up in device manager but it says drivers not installed. I don't think they make this card reader anymore and there would be drivers floating around for a card reader, so what are my choices?
I bought this Generic USB All in 1 Mini Card Reader off eBay (Some Cheap chinese thing) It worked fine on my previous setup, Windows Vista x64, and it still works on my fathers computer, Vista x64 I believe. But When I try to connect it to my current Windows 7 x64 install, it justs gives me an I/O device error, I think it might have something to do with the Device driver for Win 7 It might not be compatible, I don't know just thought somebody might have an idea if I can get it to work in Windows 7.
View 1 Replies View Relatedon my laptop (ASUS Z91N), I've got one left driver issue: the integrated memory card reader.
It's called Ricoh SD/MMC controller, the latest driver having the best behavior found is 2003-10-20 (1.4.2.9) from ASUS website for WinXP. All other drivers found does nothing, they install but when I plug the card, nothing appears in "My computer".
The problem is that when I plug a SD card, windows detects it, assigns a letter, but I am unable to open to look at the files. I get "Access denied" every time.
When I try to format, it does it with the good size detected! I tested by looking with another computer.
So, this problem is weird, I never had any issue similar to that in the past.
Anybody here having the same problem?
I'm running Windows 7 RC on HP nw8000 and I'm pretty sure the card reader worked ok on Vista Ultimate 32.
Has anyone found a driver for the built-in SD card reader? HP doesn't list anything past XP on their site, not even for Vista for this device for this notebook.
when i put my card reader in to the usb the pc bleeps ,u can see the safely remove hardware but cant see whats on the card reader
View 4 Replies View RelatedI upgraded my sony vaio laptop vgn-cr131E from vista premium to windows 7 ultimate and my card reader dissappeared
View 4 Replies View RelatedHow to open the card reader,When open memory card it says format?
View 1 Replies View RelatedI have a laser multi card reader with a 2 GB CF card that has photo's on it but will not show up on my laptop
View 5 Replies View Relatedhowdo to use the card reader work.
View 2 Replies View Related