I've been searching the forums for a solution to this and I don't know what to do: [code] so according to the MOBO spec, I could have 8Gb ram.I bought 2x 4GB Corsair memory.I have made sure that the memory chips are seated correctly BIOS detects that there is 8GB of RAM installed here is the system report on the RAM: Installed Physical Memory (RAM)8.00 GB Total Physical Memory3.93 GB Available Physical Memory2.22 GB basically my system is detecting but not using one of the RAM chips.I don't have a setting in BIOS to map memory.I can't get to the motherboard to adjust any jumper/ voltage settings CPU-Z shows both chips installed and working.I am running windows 64bit been into MSCONFIG and maximum memory is unchecked and this is where all my efforts have now run out. so I don't get it. 8Gb installed, 4Gb available?
I'm new to this site so hopefully i don't do anything wrong!! I consider myself fairly smart with computers but my laptop has gone beyond my brain At first it would just reboot itself after being on it for a little bit, I tried downloading an antivirus (avast) and it all went downhill!! Now it doesn't even recognize the windows 7, gives me a black screen telling me error and to put in disc, which I've never had one, and says: FILE CI.DLL STATUS:0XC00000E9 I cannot get it to go any farther than there,is there anyone that might be able to help?
i connected my old laptop satta drive via usb to my presario laptop. it loads drivers but i am not seeing it displayed on the my computer window. i cannot acess the drive
I have a new laptop, which was set up for me in the shop. Everything was working perfectly. Now however, my PC is not recognising the printer. I have previously been able to print from this laptop using the same cable, printer and USB port.
When I try to 'troubleshoot' this problem, I get a message that the printer driver is not installed. I thought Windows 7 automatically installed devices when connected via USB?
I have double checked the cable with another laptop and all is fine. I have double checked both USB ports with other devices and all is fine.
Until recently when I connected my ipod and Canon cameras the computer responded correctly allowing me to update, transfer pictures etc, now this doesn't happen!
I tried to run Mem86 and Windows Memory Diagnostic, but the BIOS doesn't allow booting from a USB drive. Also, Windows 7 doesn't seem to recognize the .iso file on the DVD even when I turned off "boot from hard drive" to force it to boot from the DVD drive.
Hiya, please help if you can. My son was mucking about on his Vaio Laptop windows 7 and did a terrible thing - he copied and pasted a script .vbs (pop out your dvd drive(?) I have no idea what that means, but it don't sound good, and now it is making a funny noise and wont play any discs.
I have done a fresh install of Win 7 64bit on my new SSD 160GB,i plugged in my other two now spare HHD.500GB seagate and a 160GB seagate,they were picked up in the bios,but when windows restarted in the install,it would not boot up,after a bit of tweeking if i unplugged one of the drives it booted up and continued to finish the install,there was only the two drives showing,i restarted the PC,plugged in the HDD again,the same problem,the Motherboard is a ASUS P8H67-mPro,it has 6 sata ports 2 at 6g and 4 at 3g,the bios is up to date,I have tried to contact ASUS but they have not replied a week ago,I just wanted to no if this motherboard can run 3 HDD without RAID or am i wasting my time
I am running Win 7 on a Intel Core I7 920 processor. My motherboard is a Gigabyte EX58-UD3R FE motherboard. My RAM is (4) G Skill F3-16000CL9-2GBRH 2G sticks of DDR3 RAM. It says the type is PC3-10700H. When I check my system settings in windows, it says I have 8 GB installed but only 6 GB usuable. Is there any way to make it so that all of it is usable
i decided to upgrade my laptop from 3gb ddr3 of ram to 8 gb ddr3 , now i faced an odd problem where i got to realize that despite windows recognizing all 8 gbs of ram in system information (msinfo32) under "Installed Physical Memory" i realized that both system information and task manager shows "Total Physical Memory" to be 2.93 gb , i searched the forum throughly up till i came across this thread : Memory - Set Maximum Amount Used by Windows 7 now i got to realize that 32 bit windows can only handle 4gb of ram . now trying to sort my options i have a few questions i need to be adressed :
1 - is it smooth to upgrade from 32bit to 64bit of windows , i have heaps of programs installed over years that i cant risk to lose nor have the time to reinstall if i took the fresh installation option :/ if possible then how ? any specific tool or windows version ?
2 - any known porting , utilities or hacks that were made to make 32bit os recognize all 8gb ram ?
3 - if non of the above were valid , if i am to work with only 4 gb , why does my system read only 2.93 gb of which ? i can notice it sums up all spare 5 gb as "Hardware Reserved" . i investigated to see if the extra 1 gb is reserved by graphics card but only to find that my graphics card is only up to 750 mb of shared memory and those already are shared from "Total Physical Memory" and not hardware reserve , why i have access to only 3 of the 4 gbs of rams i'm allowed ?
i have win xp machine and nvidia 9800gt 1gb card. I bought windows 7 ultimate 64bit yesterday. And do clean install of windows 7.Then download and install nvidia driver, i see my gpu dedicated memory only 128mb!. I tried change driver, no difference. Why my pc recognizing only 128mb of gpu memory? And how to use full gpu memory? Any solution? My system: intel core 2 duo e4500 3ghz, 4gb ddr3 memory, 200gb ata hard disk, 500w thermaltake psu, intel q41 mobo, nvidia geforce 9800gt
I've recently unistalled my display drivers (because I was going to update them), and after the reboot, my USB devices (keyboard/mouse) will not work at the Windows logon screen. I've been reading this is a known issue.
Here is where my problem is, I can't do a system restore because I don't have it setup, and I really won't/can't format. (stupidly only have 1 partition with lots of valuable data on it)
I'm really just interested in manually installing the USB controller device that my display drivers somehow uninstalled. (I think it's related to the chipset).
I have access to the cmd prompt in a weird repair mode that I've been able to access, that does have keyboard and mouse support. So I'm just interested in getting Windows to recognize the keyboard/mouse at the Login screen so I can actually access windows.
EDIT: The USB mouse/keyboard will work for BIOS, but the second the windows loading screen loads, the sensor for my mouse and the light on my keyboard turn off, and is not recognized until I go back pre-windows load. If I can just get past the logon screen, windows would do it's "new hardware recognized" thing. But I am stuck at the logon screen.
EDIT2: I'm running a AMD 785G chipset. I uninstalled Catalyst 12.3 to upgrade to the latest. on an AMD HD6950.
I am on the administrator account and have full rights, but can't delete ANY files. My laptop was working fine and then just crashed one day (For 6 years). Now I can log on and access all accounts and all files but cannot delete files or connect to the internet. I have read through and tried suggestions from other posts and nothing is working.
My old computer died, Sony Vaio Running Windows XP. I had been using a 100GB sata eternal drive for backup. Bought new computer, Gateway DX4860/6gigs ram running Windows 7 Home Premium, plugged external hard drive in and nothing happened. New machine does not recognize the external hard drive.
I am having quite some trouble to install windows 7 on my new SSD drive. When I reboot without the old HDD the windows cd doesn't start up. So I tried to run the CD while under windows on the old HDD, which did work, but now I only have 8gig install on the SSD and its only a boot drive not a system one. Could it be that my motherboard is to old? I did have some issues to run the SSD alone, bios didn't recognise it quite often.
CPU - Core Duo E6500 Motherboard - Asus P5VD2-VM RAM - 2 gig old HDD - Samsung IDE 250 gig ( about 10y old ) new HDD - SSD Onyx 32gig + Samsung 1T both SATA
I just installed Windows 7 build 7068. 64bit.I have an Asus P5WD2E-Premium mobo, and 5 Western Digital Hard drives of various sizes, all SATA.Windows recognizes only 2 of the drives, the c drive of course, and only 1 of two WD 400gig hds, which are identical.I know this may be a mobo issue, but, wasn't sure about Windows 7.
just updated to WIn7 64bit on my HP EliteBook 8730w laptop, and it's only recognizing 2GB of the 4 I have. Tried updating the BIOS and that didn't solve anything.
I have built a new system with a 60GB SSD to install the OS on and a 2TB hard drive for everything else. The 2TB drive can be seen in the BIOS but cant be accessed from windows.
I've been running windows 7 pro 64 bit for just under a year now. Couple days ago the computer was on just sitting idle while i was around the house, then i noticed this message pop-up the windows firewall was not active and if i wanted to activate it, ever since then i have not been able to get the computer to recognize any sort of internet connection. Im on a wired connection to a wireless router (D-Link Xtreme-N Dual Band Gigbit), all other computers connected to the router work fine.there is a red cross in the little network icon in the taskbar. If I click that icon, it says �No connections available�If I click troubleshoot, it says �Problems found - There might be a problem with the driver for the local area connection adapter�If I look in the device manager, there IS an entry for �Network Adapters�, in fact there are two:
1) Realtek PCIe GBE family controller (which i recognize as the one from my motherboard Asus P7P55D-E Pro
2) WAN Miniport (PPPOE) [i have no idea where this comes from, but it has a yellow exclamation sign above it]
I have uninstalled 1) from the device manager and let windows re-install it on reboot, i tried installing drivers from the CD the mobo came with, i tried going on another computer and getting updated drivers from the Realtek website, none of them worked. if i try to uninstall the WAN miniport it does not disappear?If I look in BIOS the contorller is there and ON. Reboot, swapping ethernet cables, restarting router, scanning for viruses/malware with MSE, Webroot Complete, Malwarebytes finds nothing.If I rollback to an earlier restore point, it doesn�t help.The only thing i can remember that happened before the loss of connection was an update to TuneUp Utilities 2012 and Webroot Secure Anywhere 2012, both of which i've since uninstalled to see if it was one of those, but still nothing. Also completely disabling Windows Firewall doesn't help either.
Okay so I just install windows 7 32bit(clean install, not upgrade) and it's not recognizing my graphics card. All it says is "Standard VGA adapter".
I've tried installing drivers but it never works and I also tried uninstalling the standard vga adapter via device manager too but it reinstalled itself. Btw my graphics card is a ATI Radeon xpress 200.
Way back when windows 7 was in beta and i was a beta tester everything worked fine.
Earlier today I uninstalled a small utility off of the system disc ("C" ) and immediately my Windows 7 system would no longer recognize my other two internal HDD's. Upon a restart, Windows again sees that there are drives there but has issues. At first I thought none of the programs would run, but upon starting Starcraft 2, I watched the sc2.exe file in take manager tick up the megs resident in memory. It took about 7 minutes before reaching 100 megs in memory then the screen went black as if the game was about to start up. At this point I'm watching on my second monitor (w/ task manager) the program loaded a full 125megs before slowing down.
I was never able to get it to start up and it does this every time. The same is true for any other program installed on that drive. I can browse it just fine and everything is where it should be -- I've tried running the .exe from the directory itself with the same result.I'm no Guru, but I'm fairly good with computers and have never seen anything even remotely close to this. I don't know if the uninstall is related, but it seems likely as it was right as that finished.
i have formatted my hard drive after it was full of bugs/virus. now when i try and boot my laptop Aspire 5532, windows 7 x64 premium, it states on start up with hdd in the machine please insert windows disk to recover system. how ever when i do this with my hdd in my machine windows does not boot from dvd/cd, but when i remove my hard drive windows 7 starts the install process, which is good, untill i have to select drive to install windows to (now i insert hdd and refresh) which populates and allows me to select drive. but then along the bottom loine states "setup was unable to create a new system partition or locate an existing system partition. see setup llog files for more info". Also when i click show details staes "windows cannot be installed to the disk, This Computer's hardware may not support booting to this disk. Ensure that the disl's controller is enabled in the computer bios menu, this is really doing my head in im not by anymeans that great with this stuff and any help would be good HDD is WD1600bevt-22zct0 (scorpio blue)
i have two 2tb sata hard drives...0-primary is the boot drive...the 2nd drive is 1-primary and was previously formatted and contains much data...the bios recognizes both yet win7 doesn't see the 2nd hard drive so i cannot access the data
After installing windows 7 and all drivers for my Samsung t220 screen and Nvdia GeForce 9800 GT, neither windows 7 nor Nvidia reconognize 1680x1050 resolution. Maximum resolution permitted is1280x1024, very deficient. Had no problem with XP and analog cable). I have tried powerstrip and created a personal driver with a 1680x1050 resolution, but with the same negative results. Buying "just" another screen is no option! Samsung doesn't provide specific drivers for windows 7.
I'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
I have a very odd problem that happened out of the blue. W7 Home Premium 32 bit, no viruses or recently installed programs. As you can see in the screenshots, theres that "icon" that says the OS doesn't recognize the program. MANY of them
