Laptop Not Recognizing Usb?
Sep 22, 2012i connected my old laptop satta drive via usb to my presario laptop. it loads drivers but i am not seeing it displayed on the my computer window. i cannot acess the drive
View 1 Replies
ADVERTISEMENT
Laptop Not Recognizing Printer
Apr 13, 2011I have a new laptop, which was set up for me in the shop. Everything was working perfectly. Now however, my PC is not recognising the printer. I have previously been able to print from this laptop using the same cable, printer and USB port.
When I try to 'troubleshoot' this problem, I get a message that the printer driver is not installed. I thought Windows 7 automatically installed devices when connected via USB?
I have double checked the cable with another laptop and all is fine. I have double checked both USB ports with other devices and all is fine.
Laptop Not Recognizing Windows?
Jan 29, 2013I'm new to this site so hopefully i don't do anything wrong!! I consider myself fairly smart with computers but my laptop has gone beyond my brain At first it would just reboot itself after being on it for a little bit, I tried downloading an antivirus (avast) and it all went downhill!! Now it doesn't even recognize the windows 7, gives me a black screen telling me error and to put in disc, which I've never had one, and says: FILE CI.DLL STATUS:0XC00000E9 I cannot get it to go any farther than there,is there anyone that might be able to help?
View 2 Replies View RelatedWindows 7 64 Not Recognizing All RAM In Laptop
Jul 23, 2011I've been searching the forums for a solution to this and I don't know what to do: [code] so according to the MOBO spec, I could have 8Gb ram.I bought 2x 4GB Corsair memory.I have made sure that the memory chips are seated correctly BIOS detects that there is 8GB of RAM installed here is the system report on the RAM: Installed Physical Memory (RAM)8.00 GB Total Physical Memory3.93 GB Available Physical Memory2.22 GB basically my system is detecting but not using one of the RAM chips.I don't have a setting in BIOS to map memory.I can't get to the motherboard to adjust any jumper/ voltage settings CPU-Z shows both chips installed and working.I am running windows 64bit been into MSCONFIG and maximum memory is unchecked and this is where all my efforts have now run out. so I don't get it. 8Gb installed, 4Gb available?
View 6 Replies View RelatedDell Laptop Not Recognizing CD In Drive
Jan 19, 2012My Dell laptop is not recognizing the cd in drive what do I do?
View 1 Replies View RelatedLaptop USB Drives Have Power, But Not Recognizing Anything
Jan 21, 2012Until recently when I connected my ipod and Canon cameras the computer responded correctly allowing me to update, transfer pictures etc, now this doesn't happen!
View 1 Replies View RelatedLaptop Not Recognizing .iso File When Booting From A DVD?
Jun 20, 2012I tried to run Mem86 and Windows Memory Diagnostic, but the BIOS doesn't allow booting from a USB drive. Also, Windows 7 doesn't seem to recognize the .iso file on the DVD even when I turned off "boot from hard drive" to force it to boot from the DVD drive.
View 9 Replies View RelatedSony Vaio Laptop Drive Not Recognizing Discs Anymore?
Apr 14, 2012Hiya, please help if you can. My son was mucking about on his Vaio Laptop windows 7 and did a terrible thing - he copied and pasted a script .vbs (pop out your dvd drive(?) I have no idea what that means, but it don't sound good, and now it is making a funny noise and wont play any discs.
View 9 Replies View RelatedDVD CD Rom Not Recognizing Cd
Apr 6, 2012When I run the program from the start menu the title menu comes up and when I click start a box pops up saying 'Please insert successful driver DVD to continue or Cancel to quit programme', So i then put the dvd into the laptop and it makes all sorts of stuttering noises and I keep clicking ok on the box and it just keeps returning the same message. Basically I can't run the program.It's not the CD because I have just installed and opened it on another laptop just fine.The problem laptop plays movies from DVDs no problems it's just this program I can't open.
Only Recognizing 1GB RAM
Nov 4, 2009I have just upgraded to Windows 7 from XP...
I have 2GB RAM installed on my laptop but for some reason Windows 7 is only recognising 1GB ?
Windows 7 Not Recognizing New Hdd?
Sep 10, 2012I have done a fresh install of Win 7 64bit on my new SSD 160GB,i plugged in my other two now spare HHD.500GB seagate and a 160GB seagate,they were picked up in the bios,but when windows restarted in the install,it would not boot up,after a bit of tweeking if i unplugged one of the drives it booted up and continued to finish the install,there was only the two drives showing,i restarted the PC,plugged in the HDD again,the same problem,the Motherboard is a ASUS P8H67-mPro,it has 6 sata ports 2 at 6g and 4 at 3g,the bios is up to date,I have tried to contact ASUS but they have not replied a week ago,I just wanted to no if this motherboard can run 3 HDD without RAID or am i wasting my time
View 2 Replies View RelatedUSB Ports Not Recognizing Anything
Jan 12, 2013When I plug a USB device into my laptop it doesn't recognize it Shown Here: Rec008.avi - download now for free. File sharing. Software file sharing. Free file hosting. File upload.
View 1 Replies View RelatedWindows 7 Not Recognizing All RAM?
Dec 7, 2011I am running Win 7 on a Intel Core I7 920 processor. My motherboard is a Gigabyte EX58-UD3R FE motherboard. My RAM is (4) G Skill F3-16000CL9-2GBRH 2G sticks of DDR3 RAM. It says the type is PC3-10700H. When I check my system settings in windows, it says I have 8 GB installed but only 6 GB usuable. Is there any way to make it so that all of it is usable
View 1 Replies View RelatedCd Drive Not Recognizing Certain Cds?
Feb 12, 2012my cd drive doesnt recognise certain cds but will recoginse others. the cd it wont recognise is brand new so there isnt anything wrong with the cd itself
View 1 Replies View RelatedUSB 2.0 Card Not Recognizing Anything?
Apr 21, 2012A card that i got installed recently it installed fine after start up but is not letting me install or even recognizing any hardware i plug into it. It might be a dodge driver that was intalled but ive uninstalled a few times and windows 7 doesnt even ask me after boot up for a installer it just searches the net and installs by itself. I need to get this fixed fast as i have lots of hardware i want to connect with it.
View 4 Replies View RelatedNot Recognizing Hardware
Sep 6, 2009After I have installed windows 7 onto my laptop, it doesnt recognize things like my scroll bar on my touch pad, I dont think it recognizes my chipset because some games I have tried to play lately say I dont even have a chipset... What is causing this? Does Windows 7 not configure to your computer when you install it? Im confused.
View 4 Replies View RelatedWMC Is Not Recognizing Radio?
Aug 19, 2012I have recently bought a DVB-T TVRadio tuner (usb stick) The brand is a localized one existing only in Greece (Turbo-X) link translated: Google Translate Anyway, the thing is that although it is fully functional (TV+Radio) with the software it comes with(ViVaTVViVaRadio), when i use it with WMC only the TV works On Music>Radio tab shows "to play FM radio, you must first install a radio tuner"
Useful info: I believe the whole product is an almost exact copy of one of the Kworld's tuner sticks, because the software that comes with the tuner is directly from Kworld Multimedia (with a tiny amount of name editing) and the remote control is identical to Kworld's remote (which is ,by the way, set up for WMC and not for ViVaTV).
ReadyBoost Not Recognizing More Than 2GB
Oct 29, 2011I have a new Notebook, an LG X140, with Windows 7 Home Premium ... activated as Genuine.It only came with 512 MB of RAM so I decided to use ReadyBoost and a 4 GB USB Drive to add more RAM.I selected "Dedicate this device to ReadyBoost" which selected 3851 MB. It only actually created an extra 2 GB of RAM. I believe I understand why there was only 3851 MB available and why it only could create 2 GB of RAM from that. so that isn't so much of an issue for me.I then used a 1 GB SD Chip which is ReadyBoost Compatible and added that to ReadyBoost the same way, hoping that I could push it to 4 GB of RAM ... however my computer still only shows 2 GB of RAM. I have tried swapping different USB Drives and SD Cards but with no success, I can't seem to get my computer to recognize any more than 2 GB of RAM.
View 9 Replies View RelatedDVD Drive Only Recognizing Cd's And Not Dvd's?
May 24, 2012What can i do to get my computer to recognize not only CD's but DVD's
View 2 Replies View RelatedPc Not Recognizing Any Recorded DVD
Sep 29, 2012Suddenly my pc recognizing any copied DVD/CD as blank discs and only plays originals
View 3 Replies View RelatedNo Sound Device Recognizing?
Apr 22, 2012I have recently installed Win7 Ultimate on my PC - was running Vista Home Premium.Had no problems until last week. I had a BSOD, which surprised me, haven't seen one of those in a while. Major error on my part to not write down all that sais, but there it is.Now I have NO sound at all. Actually, my computer does not recognize the monitor speakers, nor does it recognize external speakers, when I tried using a pair of them instead, nor does it recognize headphones when plugged in to the jack. The computer informs me that the device is simply not plugged in - even though it IS.I have downloaded and updated every driver I can think of to no avail. So I am now at a standstill as to what to do.
[code]...
Win 7 Not Recognizing SATA Drive
Jan 1, 2010Before I made the commitment to use Windows 7 as my primary OS, I figured I'd experiment in a dual boot environment. My current setup is Windows XP (x32) installed on a 500GB SATA drive. This drive has a partition for the OS and a separate partition for all of my files and data. To install Windows 7 I removed my SATA drive and (successfully) installed Windows 7 (64-bit) onto an 80GB IDE drive (controller 0, disk 0).
After the installation I shut down my system, reconnected my SATA drive, changed the BIOS boot order to look at my IDE and Windows 7 booted without a hitch. My motherboard is a Gigabyte GA-K8U-939
Now, with Windows 7 running and my SATA drive connected, Windows 7 does *not* recognize the drive. It is completely missing from the disk manager. I loaded the drivers for my motherboard ((however since the MoBo is a couple years old, it doesn't have Vista or Windows 7 drivers)), it loaded quasi-successfully but spat out some error about it not being totally successful. Now, after I log into Windows 7 I receive an error that goes like,
Code: Initial ALiRAID error!!Please Check:
1) ALiRAID driver is installed
2) ALiRAID controller is connected to disk drive(s)
When I reboot my computer and switch the boot order in the BIOS to boot from my IDE drive, my system will boot into Windows XP without any problem at all. I've also switched the BIOS setting from "RAID" to "IDE" for the SATA drive and that appears to have done nothing towards Windows 7 being able to access it.
There's gotta be some way to get Windows 7 to see my SATA drive, doesn't there?
USB Ports Not Recognizing Any Devices
Aug 3, 2010My usb ports are not recognising any devices. I have to delete my usb drivers completely and reinstall them and then the usb device only works 1 time.
View 9 Replies View RelatedDrive Not Recognizing Blu Ray Discs
May 8, 2011I have a Sony Vaio E-Series VPCEC1S1E with a Combi drive optiarc bc-5500-h it will play CD/DVD's but I put in a Blu Ray and it's say "Please insert disc into drive"
the driver is up to date and I have played Blu Rays for the last year but doesn't even recognize there is a disc in the drive now the computer was preinstalled with Windows 7
DVD-RW Drive Not Recognizing .exe Files
Jun 25, 2011I have a Lite-On LightScribe 24X SATA DVD+/-RW Dual Layer Drive IHAS424-98 that I recently installed on a brand new computer that I built myself. I am running win 7 64 bit. I have been having problems with auto play and I thought it might have been the drive so I ordered another drive and its doing it with that one too.
What is happening is when I insert a software CD or DVD windows typically would autoplay the setup.exe or whatever the .exe file is (depending on your autoplay settings). Well, for some reason my computer is not even seeing those files. If I browse the DVD I can open the file that way but for some reason autoplay cannot see the setup.exe file to auto start it. My Autoplay settings are all on default except the software one which is set to install. For some reason it seems that every DVD or CD I enter is recognized as a mixed content cd and the default action when double clicking the drive icon in my computer is to launch the folder with all the files in it. Also, typically if its a software cd or dvd the drive icon changes to the exe file's icon. Mine doesn't and remains the same. The name changes from DVD RW Drive (F: ) to DVD RW Drive (f: ) OFFICE12......(this is office 2007 CD). I searched google and everywhere for any similar problems but could not find any solutions. I have tried everything. And so everyone knows the CDs/DVDs I run all have the autorun.inf file
PC Not Recognizing External Drive?
Jul 15, 2011i have a 1Tb external Drive (USB) and its never had any problems until now. I just recently reinstalled windows and when I try plugging in my external drive and then powering it on. My PC doesn't recognize it. I know that it knows its plugged in because it is showing up in Device manager and it is showing up as the "Safely remove usb" in the task bar.
View 7 Replies View RelatedWindows 7 32 Bit Not Recognizing Ram Upgrade
Jan 22, 2013i decided to upgrade my laptop from 3gb ddr3 of ram to 8 gb ddr3 , now i faced an odd problem where i got to realize that despite windows recognizing all 8 gbs of ram in system information (msinfo32) under "Installed Physical Memory" i realized that both system information and task manager shows "Total Physical Memory" to be 2.93 gb , i searched the forum throughly up till i came across this thread : Memory - Set Maximum Amount Used by Windows 7 now i got to realize that 32 bit windows can only handle 4gb of ram . now trying to sort my options i have a few questions i need to be adressed :
1 - is it smooth to upgrade from 32bit to 64bit of windows , i have heaps of programs installed over years that i cant risk to lose nor have the time to reinstall if i took the fresh installation option :/ if possible then how ? any specific tool or windows version ?
2 - any known porting , utilities or hacks that were made to make 32bit os recognize all 8gb ram ?
3 - if non of the above were valid , if i am to work with only 4 gb , why does my system read only 2.93 gb of which ? i can notice it sums up all spare 5 gb as "Hardware Reserved" . i investigated to see if the extra 1 gb is reserved by graphics card but only to find that my graphics card is only up to 750 mb of shared memory and those already are shared from "Total Physical Memory" and not hardware reserve , why i have access to only 3 of the 4 gbs of rams i'm allowed ?
7 Not Recognizing Hard Drive
Dec 27, 2009Windows 7 doesn't seem to recognize my hard drive during installation. The hard drive, along with the computer, are brand new.
In my bios it says:
IDE Channel 1 Slave [WDC WD5000AAKS-00V1A]
The hard drive is a 500GB Western Digital Caviar Blue and the motherboard is a Gigabyte MA785GT-UD3H.
Latitude 2120 Not Recognizing WDS
Oct 2, 2012I have a WDS set up for my district, it works fine for all machines except my dell latitude 2120s. The issue is when you boot the netbook to the WDS it cannot contact the server to upload the image. The issue also happens if you try to send an image to the machine, it says there is no network driver. Ive tried injecting WDS with the network driver from dells website, as well as the drivers package disc from dell. Ive even tried a few other drivers from different places without any luck. Booting to WDS has no issues. While booted, i can pull up the cmd prompt but cannot ping anything on my network.
View 9 Replies View RelatedWindows 7 Not Recognizing DVD Writer?
May 22, 2011My win7 can't recognize dvdwriter. What can I do now?
View 2 Replies View RelatedDVD Drive Only Recognizing Music Cd's
Dec 31, 2011I was installing World of warcraft (dvd-rom disks) and fell asleep while the 1st disk was installing. I woke up 2 hours later and had a prompt to insert disk 2. I inserted disk 2 and it wouldnt even recognize the disc was present and from then on the drive wont detect any dvd but it rips and plays music cd's with no problem?
View 1 Replies View Related