Win 7 Not Recognizing SATA Drive

Jan 1, 2010

Before I made the commitment to use Windows 7 as my primary OS, I figured I'd experiment in a dual boot environment. My current setup is Windows XP (x32) installed on a 500GB SATA drive. This drive has a partition for the OS and a separate partition for all of my files and data. To install Windows 7 I removed my SATA drive and (successfully) installed Windows 7 (64-bit) onto an 80GB IDE drive (controller 0, disk 0).

After the installation I shut down my system, reconnected my SATA drive, changed the BIOS boot order to look at my IDE and Windows 7 booted without a hitch. My motherboard is a Gigabyte GA-K8U-939

Now, with Windows 7 running and my SATA drive connected, Windows 7 does *not* recognize the drive. It is completely missing from the disk manager. I loaded the drivers for my motherboard ((however since the MoBo is a couple years old, it doesn't have Vista or Windows 7 drivers)), it loaded quasi-successfully but spat out some error about it not being totally successful. Now, after I log into Windows 7 I receive an error that goes like,

Code: Initial ALiRAID error!!Please Check:

1) ALiRAID driver is installed
2) ALiRAID controller is connected to disk drive(s)

When I reboot my computer and switch the boot order in the BIOS to boot from my IDE drive, my system will boot into Windows XP without any problem at all. I've also switched the BIOS setting from "RAID" to "IDE" for the SATA drive and that appears to have done nothing towards Windows 7 being able to access it.

There's gotta be some way to get Windows 7 to see my SATA drive, doesn't there?

View 6 Replies


ADVERTISEMENT

Windows 7 Not Recognizing 2TB SATA Drive

Aug 10, 2012

I have built a new system with a 60GB SSD to install the OS on and a 2TB hard drive for everything else. The 2TB drive can be seen in the BIOS but cant be accessed from windows.

View 1 Replies View Related

Install Sata Hard Drive As A Slave Where The Master Is Also A Sata?

Aug 10, 2011

i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7

View 4 Replies View Related

SATA-II Drive On SATA Raid Controller?

May 7, 2011

i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?

View 5 Replies View Related

Windows Is Not Recognizing Second Hard Drive In Optical Drive

Jun 16, 2012

I have an Alienware M14x R1 with a SSD - Crucial M4 in the main spot and the stock HD in the optical drive. I have never had any issues with any of this stuff before this clean install - and I have done clean installs previously. I also used Parted Magic to Secure Erase my SSD and HD before install.I am experiencing some pretty frustrating problems:

1. I have NO INTERNET CONNECTION (everyone keeps telling me to install drivers...how can I do this without internet connection??)

2. Windows is not recognizing my second hard drive in the optical drive even though it did when I was installing and showed it at the section where you can add new partitions etc

3. My display adpater is not working as I have a 1600x900 screen and I can only go up to 1024x768...

View 8 Replies View Related

Cd Drive Not Recognizing Certain Cds?

Feb 12, 2012

my cd drive doesnt recognise certain cds but will recoginse others. the cd it wont recognise is brand new so there isnt anything wrong with the cd itself

View 1 Replies View Related

DVD Drive Only Recognizing Cd's And Not Dvd's?

May 24, 2012

What can i do to get my computer to recognize not only CD's but DVD's

View 2 Replies View Related

Drive Not Recognizing Blu Ray Discs

May 8, 2011

I have a Sony Vaio E-Series VPCEC1S1E with a Combi drive optiarc bc-5500-h it will play CD/DVD's but I put in a Blu Ray and it's say "Please insert disc into drive"

the driver is up to date and I have played Blu Rays for the last year but doesn't even recognize there is a disc in the drive now the computer was preinstalled with Windows 7

View 9 Replies View Related

DVD-RW Drive Not Recognizing .exe Files

Jun 25, 2011

I have a Lite-On LightScribe 24X SATA DVD+/-RW Dual Layer Drive IHAS424-98 that I recently installed on a brand new computer that I built myself. I am running win 7 64 bit. I have been having problems with auto play and I thought it might have been the drive so I ordered another drive and its doing it with that one too.

What is happening is when I insert a software CD or DVD windows typically would autoplay the setup.exe or whatever the .exe file is (depending on your autoplay settings). Well, for some reason my computer is not even seeing those files. If I browse the DVD I can open the file that way but for some reason autoplay cannot see the setup.exe file to auto start it. My Autoplay settings are all on default except the software one which is set to install. For some reason it seems that every DVD or CD I enter is recognized as a mixed content cd and the default action when double clicking the drive icon in my computer is to launch the folder with all the files in it. Also, typically if its a software cd or dvd the drive icon changes to the exe file's icon. Mine doesn't and remains the same. The name changes from DVD RW Drive (F: ) to DVD RW Drive (f: ) OFFICE12......(this is office 2007 CD). I searched google and everywhere for any similar problems but could not find any solutions. I have tried everything. And so everyone knows the CDs/DVDs I run all have the autorun.inf file

View 2 Replies View Related

PC Not Recognizing External Drive?

Jul 15, 2011

i have a 1Tb external Drive (USB) and its never had any problems until now. I just recently reinstalled windows and when I try plugging in my external drive and then powering it on. My PC doesn't recognize it. I know that it knows its plugged in because it is showing up in Device manager and it is showing up as the "Safely remove usb" in the task bar.

View 7 Replies View Related

7 Not Recognizing Hard Drive

Dec 27, 2009

Windows 7 doesn't seem to recognize my hard drive during installation. The hard drive, along with the computer, are brand new.

In my bios it says:

IDE Channel 1 Slave [WDC WD5000AAKS-00V1A]

The hard drive is a 500GB Western Digital Caviar Blue and the motherboard is a Gigabyte MA785GT-UD3H.

View 9 Replies View Related

DVD Drive Only Recognizing Music Cd's

Dec 31, 2011

I was installing World of warcraft (dvd-rom disks) and fell asleep while the 1st disk was installing. I woke up 2 hours later and had a prompt to insert disk 2. I inserted disk 2 and it wouldnt even recognize the disc was present and from then on the drive wont detect any dvd but it rips and plays music cd's with no problem?

View 1 Replies View Related

Windows 7 Is Not Recognizing Pen Drive?

Jan 21, 2012

my windows7 is not recognising my pendrive

View 1 Replies View Related

DVD Drive Not Recognizing Dvds

Aug 30, 2012

In my Inspiron 1545 the Optiarc DVD +/- RW AD-7560s recognizing CDs but not DVDs or DVD-RW. Have installed the latest drivers, but still unable to play DVDs. What else can I try?

View 4 Replies View Related

DVD Drive Not Recognizing Dvds?

Nov 2, 2012

Toshiba DVD Player in Windows7 It worked with Vista

View 1 Replies View Related

Windows 7 Not Recognizing Hard Drive?

Oct 15, 2011

i have formatted my hard drive after it was full of bugs/virus. now when i try and boot my laptop Aspire 5532, windows 7 x64 premium, it states on start up with hdd in the machine please insert windows disk to recover system. how ever when i do this with my hdd in my machine windows does not boot from dvd/cd, but when i remove my hard drive windows 7 starts the install process, which is good, untill i have to select drive to install windows to (now i insert hdd and refresh) which populates and allows me to select drive. but then along the bottom loine states "setup was unable to create a new system partition or locate an existing system partition. see setup llog files for more info". Also when i click show details staes "windows cannot be installed to the disk, This Computer's hardware may not support booting to this disk. Ensure that the disl's controller is enabled in the computer bios menu, this is really doing my head in im not by anymeans that great with this stuff and any help would be good HDD is WD1600bevt-22zct0 (scorpio blue)

View 4 Replies View Related

Dvd Drive Just Stopped Recognizing Discs

Dec 8, 2011

my dvd drive just stopped recognizing discs...the icon even dissappeared

View 1 Replies View Related

Dell Laptop Not Recognizing CD In Drive

Jan 19, 2012

My Dell laptop is not recognizing the cd in drive what do I do?

View 1 Replies View Related

Windows 7 Not Recognizing A 2nd Hard Drive?

Oct 25, 2012

i have two 2tb sata hard drives...0-primary is the boot drive...the 2nd drive is 1-primary and was previously formatted and contains much data...the bios recognizes both yet win7 doesn't see the 2nd hard drive so i cannot access the data

View 2 Replies View Related

Sata Drive Recognition Preventing Addition Of 2nd Drive

Dec 8, 2012

Have XP on C drive and looking to install Win 7 on 2nd Sata drive for dual boot. However, when installing a 2nd Sata drive my XP bios identifies it correctly as a Sata drive but my PC Disk management recognises it as a Removeable disk preventing me from installing Win 7. I have tried a couple of different Sata disks with the same result.

View 6 Replies View Related

External Sata Drive Will Not Keep Assigned Drive Letter?

Jul 16, 2011

I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.

View 6 Replies View Related

Install Windows 7 With Sata Hard Drive And IDE DVD ROM Drive

Oct 8, 2010

I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.

My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)

View 9 Replies View Related

Windows 7 Won't Recognizing External Hard Drive?

May 21, 2009

I'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.

View 9 Replies View Related

Windows 7 Not Recognizing External Hard Drive?

Jul 13, 2012

I have windows 7 64 bit and I'm trying to copy data from my old desktop which won't boot up anymore to my laptop. It is a 3.5 inch sata hard drive which I connected to a usb external hard drive dock. But when I plug it in windows just doesn't recognize it and it doesn't appear in windows explorer. When I go into disk management it recognizes it but says it is not initialized and asks me if I want to initialize it. I'm reluctant to do this as I'm not sure if it will wipe the drive. Any ideas on how I can view my files?
It is a 300GB drive split into 3 NTFS partitions which has both windows xp and windows 7 installed on it.

View 1 Replies View Related

Recognizing External Hard Drive After Sleep Awakening?

Dec 7, 2012

I am having a problem with a Seagate 1 TB Backup Plus External Hard Drive connected to the USB port of my Asus Sabertooth motherboard. After waking up the system after sleep, the external drive vanishes from the PC. Web searching has shown me a fix in 2009 that was supposed to be incorporated into Windows 7. It either was never done, or it was not pertinent to my situation, since it made no reference to USBconnection. The problem described then was that due to the large size of this drive, it did not respond soon enough to the awakening process, and thus was never seen

View 6 Replies View Related

Windows 7 Not Recognizing Verbatim External Hard Drive?

Aug 7, 2012

why does windows 7 not recognize the verbatim external hardrive I have? I would like to do a back up.

View 2 Replies View Related

Sony Vaio Laptop Drive Not Recognizing Discs Anymore?

Apr 14, 2012

Hiya, please help if you can. My son was mucking about on his Vaio Laptop windows 7 and did a terrible thing - he copied and pasted a script .vbs (pop out your dvd drive(?) I have no idea what that means, but it don't sound good, and now it is making a funny noise and wont play any discs.

View 9 Replies View Related

Disk Manager Not Recognizing C: Drive After Failed Ubuntu Install

Apr 26, 2012

Basically what happened was I deleted the factory partitions on this laptop( HP Pavilion G6) using disk management down to two partitions and attempted to install Ubuntu on the other partition.After a horrendously failed attempt to install Ubuntu, disk management will not recognize my hard drive even though I can see it and access it through windows. I just want to re-partition it so I can set up a recovery partition.It wouldn't boot up after the failed install, saying I had no operating system, but I used a Windows 7 repair disc and now it boots up fine, but disk management doesn't show my hd or any partitions.

View 3 Replies View Related

Windows 7 Sata Or IDE Drive

Jan 22, 2013

I need to reinstall my Windows 7 from cracked to legal. My PC has 3 HD in it. 200 GB SATA, 200 GB Primary IDE and 160 GB Secondary IDE. It is currently loaded on the 200gb Primary IDE and the other 2 are for backup and saving data. Would I be better off installing Windows 7 on the SATA drive and using both IDE drives for backup and saving data? If so is the easiest way to just disconnect the IDE drives until Windows 7 is installed then format the original OS drive to use for backup?

View 1 Replies View Related

Backup With SATa Drive?

Mar 16, 2011

Having just bought a new PC i was left with a perfectly good SATA HDD which I intended for use in backups. The drive seemed to work ok until it cane to backing up! The drive was 320gb but when trying to back up it shows as only 47gb (not much good for a full backup).

View 3 Replies View Related

Sata Drive Needs Formatting

Aug 10, 2009

I have installed windows 7 ultimate x64 and i am really impressed by it.

but i have a question for you, i have a second 500 gb sata hard drive which i have connected after the install which is formatted with ntfs file system from my original windows xp o/s , it shows up in device manager but will not work , windows ask me to format the drive which i dont want to do because has loads of files on which i dont want to lose.

am i missing something they both use the ntfs file system .

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved