Install Sata Hard Drive As A Slave Where The Master Is Also A Sata?

Aug 10, 2011

i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7

View 4 Replies


ADVERTISEMENT

Open Sata Slave And Master Hard Drive?

Sep 20, 2012

find a solution to how open sata slave and master hard drive on a desktop

View 1 Replies View Related

Master Slave For Sata Hdd In Asus M5a97?

Jun 2, 2012

I am using Asus UEFI M5A97 motherboard. I have GPT formatted WD30EZRX Caviar Green 3T. The OS is Win7 64-bit Ultimate. The system is working fine with that hd. I have another hd WD2002FAEX, a Western Digitial 2T Black edition. On it, there is also similar OS Win7 64-bit Ultimate. This one is formatted in normal MBR. It is also working fine on its own.The problem arise when I am attaching both the hds on the system. I want to boot on the 3T and to treat the 2T as secondary (slave). When I do that the system does not boot. So far I am not able to configure the BIOS to make it work. After a few trying with the BIOS settings, the system manages to boot on the 2T but that is not what I wanted.

The only way I could use all the hd is by 'brute-forth'. I think that's the term. I make use of hds hot swapable. Leave the side cover open at all times. Plug the power cables to all available hds (but not the sata cables - the cables are plugged onto the board only). Plug the sata cable to the 3T drive and boot the system. When the system is up, plug the other sata cable to the other hd that I want to use as secondary. Plug in more sata cables to other hds if you need. I tried with four and the system recognizes them all.

View 6 Replies View Related

SATA Hard Drive - How To Install And Setup

Mar 1, 2010

How to Install and Setup a SATA Hard Drive ?

View 0 Replies View Related

Install Windows To Sata Controller Card With Hard Drive Connected

Nov 3, 2012

i installed a sata controller because the sata controller on the motherboard went out. I can easily install ubuntu but when i try installing win 7 it asks for a cdrom driver, when i try booting from usb it asks for hdd driver.

View 1 Replies View Related

Install Windows 7 With Sata Hard Drive And IDE DVD ROM Drive

Oct 8, 2010

I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.

My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)

View 9 Replies View Related

SATA-II Drive On SATA Raid Controller?

May 7, 2011

i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?

View 5 Replies View Related

Add A 3rd SATA Hard Drive?

Jan 19, 2012

I am wanting to add a 3rd drive to my dell GX620. It has only 2 ports for SATA. Any good ideas on how to do this? Maybe convert an EIDE port?

I have a sata dvd writer, and two sata hard drives. Hoping to use them all. DVD writer is a lightscribe that's why I wanted to keep it.

View 3 Replies View Related

Hard Drive IDE SATA

Nov 27, 2009

My setup: XP on my C-drive with 2x SATA drives as slaves.

My requirement: I want to take my drives out and just use one of my SATA drives to install WINDOWS 7. If i tell my BIOS that my new C-Drive is that SATA drive, will i have to tell it again that my old drive is an IDE when i put that back in without the new SATA drive plugged in.

My reason: I have got the new WINDOWS 7 and want to install everything and update all my programs also have a good look and learn before i start having my work on it. It is easier for me to just unplug the power leads on each drive before i start then to have to redo all my work if i mess WINDOWS 7 up and have to format. I cant afford to loose everything.

Yes i could back everything up but i need to work while this is happening if you know what i mean.

View 5 Replies View Related

SATA Hard Drive Not Detected

Nov 26, 2010

I am trying to install windows 7 for a friend but the hard drive isn't detected within windows setup or within the bios. I have tried installing SATA drivers to try and get windows to recognise the hard drive but to no avail. Is there anything else I can try before assuming that the hard drive may be faulty?

View 2 Replies View Related

SATA Hard Drive Connections

Oct 11, 2012

My SATA hard drive has three connectors, power, SATA and to the right is an additional male four pin connector. What connects to that connector?

View 16 Replies View Related

SSD Hard Drive - Use SATA As IDE Or AHCI In BIOS

Sep 28, 2012

I have just fitted a SSD drive in my computer windows 7 64 bit system, when I installed windows onto the new SSD I just unplugged my old hard drive and fitted the SSD and just installed windows 7 and all worked ok. But after the new install was working I was told I needed to make a change in the BIOS to alter the settings from treat Sata as IDE to treat Sata as AHCI. I did this and all was ok with the new drive the installation worked and the new drive is running ok.

But now I have since read that I should have made the bios change before installing windows nad should not be done after the install, So do I need to reinstall windows 7 with the bios changes to treat sata as AHCI before I install or will it work ok it seems to be ok but im not sure now. I was also under the impression that I could still have my old hard drive fitted and just select the hard drive I wanted to boot from as the computer started, I wanted to do this so.

I could still has access to all my old stuff if I needed it. But now my old hard drive will not boot until I change the Bios back to treat Sata as IDE, so is this not going to work or will I have to change the bios each time I need access to my old drive. Also I have an Asus P6T SE motherboard so can I plug the SSD into any Sata port or is it better to plug it into number 1 if so how do I find which one is number one.

View 4 Replies View Related

Windows 7 Won't Boot With Second SATA Hard Drive?

Jun 28, 2011

I've recently purchased two 30GB SSDs which I have set up in a RAID 0 array and I have installed Windows onto these drives. I have a second, 2TB Seagate Barracuda Green HDD that I have used to put my user profiles and additional programs/games on as it wouldn't fit on the SSD.Everything was fine for a few days after installation. Then this morning I rebooted the computer and it just stalled on the flashing cursor (underscore) in the top left corner of the screen. I did the basic fixes (Windows repair, checking RAM) and nothing worked.Then I thought that I should try disconnecting all but the SSD with the OS on it. SUCCESS! It booted to Windows but couldn't find any programs/user data so it created a new "profile". I shutdown the computer and tried reconnecting just the data hard drive.I have two additional hard drives (used for backups) that don't affect anything at all when I plug them in.Does anybody know what could be the problem? I'm at a loss and I need the computer

View 3 Replies View Related

Win 7 Unable To Detect SATA Hard Drive

Dec 20, 2009

I recently embarked on the journey of building my first custom PC. Everything was going well, until I hit a speed bump of installing Windows 7 64 bit. So like usual I boot from the CD drive, and stick Windows 7 in. When it gets to the point where I'm going to install, it is unable to find my SATA drive to install Windows 7 on.

It then asks me to "locate drivers." So it gives me an option to browse, and when it does so I put in the disk that came with my mobo, but it's unable to find any drivers. I tried downloading drivers from my motherboard's web site, sticking them on an external HD, and locating them from there, but that still didn't work.

I checked in my BIOS, and my SATA type is under Native IDE. I tried switching it to AHCI, and my HD was no longer detected in the BIOS, switched back to Native IDE and it found it again. Also, Onchip IDE Channel is set to Disabled, and Onchip SATA Control is set to Enabled, does this matter any?

I was wondering,though, is it possible that if I set the SATA type to AHCI, move the SATA cables into ports so that the drive is recognized by my BIOS, use the AHCI drivers I downloaded, Windows 7 will detect it?

View 5 Replies View Related

Can A 2tb Sata Hard Drive Be Installed On Optiplex 745

Jun 1, 2012

No success getting windows 7 to install with 2 TB sata hard drive. It reads on BIOS but when installer setup for W7 it stops in the beginning with "required cd/dvd driver missing"; asking you to go ahead and remove your installer disk for that particular step only.

View 1 Replies View Related

2TB Hard Drive Won't Work On Marvell 6GB SATA Port

Jun 8, 2011

Intel Core i7-960 3.20GHz LGA1366 CPU BX80601960
MB Intel BOX DX58OG
PSU Corsair 600W
MEM 4G KST KVR1333D3/4GR x3
EVGA GeForce GTX 560 Ti
Western Digital 500 GB SATA 6.0 GB-s Internal OEM Drive WD5000AAKX
Western Digital 2 TB Caviar Black SATA 6GB/s Internal OEM Drive WD2002FAEX

Just built this machine. Installed Windows 7 on the 500GB drive. Both drives are plugged into the blue SATA 6GB ports on my board. My drivers for these controllers are Marvell 91xx SATA 6G v1.2.0.1002 (Dated 3/7/2011). The second 2TB drive shows up in BIOS as well as Drive Management in Windows, but it will not be recognized as an accessible drive that can be formatted, partitioned, or anything. I get an error each time I attempt to format or partition through Drive Management. When I plug the 2TB drive into one of the other (black, Intel) SATA ports, the drive works fine, but in the blue ports it just won't seem to work. The 500GB drive, however, works perfectly as the boot disk in these ports.

View 9 Replies View Related

SATA USB Adapter With Macbook Formatted Hard Drive?

Apr 28, 2012

I am trying to access my wife's macbook hard drive via my Windows computer using the Vantec SATA/IDE to USB 2.0 Adapter. The Apple techs said they could not get the drive to register when they hooked it up. However, we gave it a good drying with blow dryerThe adapter works fine and all the correct drivers installedI am in disk management and the 250GB drive seems to be showing up. However, it is not showing up in My Computer and right click shows "assign a letter" is grayed out.

View 2 Replies View Related

Win7 Doesn't Recognize SATA Hard Drive

Jan 30, 2010

I built a new computer. Rather expensive, but it should perform well. -Anyway-, I bought a brand new hard drive with the expectation of installing windows 7 on it and then working from there. The hard drive is recognized in the BIOS, the CMOS, and anything at all I've checked, but when I put the windows 7 64 bit disk in and try to do a custom install, seeing as I have nothing on the disk from which to upgrade, my hard drive does not show up in the section in which 7 asks where I want to install.

Motherboard is GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard, hard drive is Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive.

The hard drive is plugged into the top SATA port (It has like, 10).

What can I do?

View 27 Replies View Related

Transfer Files From Bad Sata Hard Drive To New Hard Drive?

Dec 24, 2011

I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?

View 4 Replies View Related

D SATA Hard Drive Disappears After Random Amount Of Time?

Apr 7, 2011

My D 200gb SATA hard drive disappears around 1-90 mins while on windows 7. I have tried registry repairs and alot of things. Its not faulty cables because i used to have win Xp on exact same computer but reformatted to windows 7. Rebooting makes the hard drive reappear but it still disappears after a while. It still shows up in the bios though. When it disappears, it is completely gone, even in device manager.

my important data is on my 200gb D drive and i only use C for my os and some other things like Firefox because its only 80gb

View 9 Replies View Related

Clash Between Sabrent 2.0 To SATA/IDE Hard Drive Adapter With Windows 7?

Oct 17, 2011

Interaction (interface?) between a Sabrent USB 2.0 to SATA/IDE Hard Drive Adapter Product Code: USB-DSC5 and my Windows 7 Home Premium 64-bit?When connected to IDE Drives Maxtor and Western Digital, and through the usage of Windows 7 it tellls me that the Hard Drive "is not ready". Is that a message originated by the Windows 7 software?If so how do I go about "getting the disk ready" so i could change disk type or number or sizes of each partition and/or reformat?unexpected report from the Windows 7 interaction with this adapter and the Hard Drives it holds, 40 GB and 80 GB IDE drives Maxtor and Western Digital. I am trying to use Windows (or some other third party software) to resize the partitions, change the disk type and eventually reformat.

View 1 Replies View Related

Samsung Sata 1tb Internal Hard Drive Down Load Driver?

Oct 22, 2011

Ive got a samsung 1tb/5400rpm/8m) i need the driver to load in on insall of windows 7.

View 1 Replies View Related

Windows 7 Pro 64bit Does Not Detect Any Internal Sata Hard Drive

Dec 18, 2011

windows 7 pro 64 bit does not detect any hard drives - i have 4 sata - new install?

View 1 Replies View Related

Cannot Install On SATA Drive

Jun 4, 2010

This seems to be such a frequent issue that it could/should be a FAQ but I haven't found my answer yet.

I am (currently) running Windows 7 64 ULT on my home PC. I purchased an Intel X25M 80GB SATA drive and connected it in order to benefit from the speed. The issue is that setup hangs during the "expanding files" on this drive. Looking back I have *never* been able to install windows (XP Vista or 7) on a SATA drive on my mobo.

In order to avoid confusions I did the following.Removed the 2x400GB striped drives. Removed the old PATA-IDE drive, therefore only drives available were the Optiarc DVD and the new Intel SSD.

View 4 Replies View Related

SATA DVD CD Drive - How To Install

Mar 2, 2010

How to Install a SATA DVD CD Drive in a Desktop PC ?

View 0 Replies View Related

Unable To Boot From Laptop Hard Drive Connected Through USB SATA Cable

Mar 4, 2012

I have a Dell Inspiron 1545 laptop. I recently developed hard drive trouble and have had to order a replacement.Instead of installing Windows 7 all over again, with all the drivers, etc., I want to clone my existing hard drive to the new one.I intend to connect one of the hard drives to my system via a USB SATA cable with the other drive connected inside my system.

View 2 Replies View Related

Unable To Assign Drive Letter To Sata Dynamic Hard Disk?

May 26, 2012

I formatted and installed windows 7 64 bit in a pc which previously had windows 7 32 bit. When i booted my 1tb dynamic disk was not detected. So I went into disk management and it had listed my disk as "Foreign Disk". So i imported the foreign disk.

The drive was detected and opened. So i rebooted the pc but now the drive is still not appearing in my computer. When i go to disk management the 1tb appears but there is no drive letter assigned. When i try to assign drive letter it statest that "Specified File cannot be found"

View 1 Replies View Related

Install Win7 On SATA Drive

Sep 29, 2009

I have a HP m7667c, which has two SATA drives. The motherboard is ASUS P5BW-LA (or Basswood-UL8E). I've never successfully installed vista before because of it kept asking for SATA drive. I wonder if there is a solution for this problem with Window 7?

I think I have RAID on in the BIOS configuration but I don't really want to turn it off because in that way my old WinXP would die. I just wanted to give Windows 7 a try before I completely change to it. Could anyone help me? I could provide more information about the desktop if necessary.

View 0 Replies View Related

Oem Install Fresh Sata Drive

Nov 26, 2009

I am attempting to install a Windows 7 OEM x64 onto an older machine I have. MB is a Foxconn NF4UK8AA-8EKRS, CPU is AMD Athlon 64 x2, 4200+ 2.25 GHz, RAM 1GB. I installed a new OEM 500GB SATA hard drive unformatted.

Current OS is Windows XP Home SP2, I deleted SP3 since it was giving me some problems with auto login.

My DVD drive will not read the Windows 7 installation disk, similar to another post the drive just flashes, never spools up. It will read other CDs and DVDs.

I initialized the hard drive but have not partitioned or formatted the new SATA hard drive which is where I want to install the new OS. While the BIOS recognizes the drive, its not listed on Computer tree.

I have copied the Windows 7 OEM DVD contents onto a Folder that I created on a Toshiba External USB drive. Only had a 2GB USB Flash Drive so thought I would use the external drive and select the setup.exe in the Windows 7 files I copied into a folder without formatting a complete 250GB ext USB drive.

Question, can I partition and format the new SATA drive using the Windows XP Home Edition with an NTSF format and will this be recognized by Windows 7?

Question, can I install Windows 7 from the Toshiba Ext USB drive's folder onto the newly formatted SATA drive? Or does Windows 7 require a different formatting setup?

The BIOS and MB won't recognize a DVD drive it only allows a boot from CD. I removed the CD and DVD master/slave parallel cable and only installed the DVD as the master, but Windows 7 DVD just blinks and never spins the drive.

If I can get the new OS installed I'll remove my two older 40GB PATA hard drives and add more RAM. This machine is for my wife's use since it was in the garage gathering dust. Thought I would revive it and set up a wireless home group between my machine and her's. I added an all in one printer/copier/scanner in addition to the HP Photosmart D7460 I have so we can share files, printers and Internet connection.

I have been building my own machines since about 1990. Building a machine is fun (takes maybe 2hrs) but all the software kicks my butt. Also I went to the OEM System Builder License at Microsoft OEM Partner Center that is the most confusing arrangement I have ever seen. I'm just a home builder having fun, not a business, must I buy the full version to get this installed?

View 1 Replies View Related

Changed The SATA Controller From AHCI To Raid SATA Result = FAILED?

Aug 10, 2010

Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:

At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED

On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.

View 9 Replies View Related

Install Error, I/O Communications, SATA Drive

May 23, 2009

i am not sure it's windwos 7 problem or my configurations

i tried to install windows 7 RC on the below setup (all new), but failed

1. SATA harddisk, WD Cavier 1T

2. mobo, Gigebyte GA-GM-785-S2H

3. SATA optical drive. LG-GGC...

the last two components work fine if i replace the SATA HD to a IDE HD, meaning the existing system (xp) started normally. no windows 7 installation

but, when i try the 3 componenets togehter to install windows 7 (the SATA HD was not even formated). the scenarios were:

1. if i configured the cmos to see the SATA HD as AHIC mode, the system would freeze at "verifying DMI pool", not even bothering to start the windows 7 installation disk (even i defined only one start-up device, my optical sata).

2, if i configured the cmos to see the SATA HD as Native IDE mode, the system would go to the optical sata and found windows 7. THE PROBLEM came during "windows is loading files". after like half min, the error message popped out, saying an I/O error occured, either i had a external usb drive corrupted or a storage fault.

The problem came out when i had no usb devices attached at all. then i also tried to copy SATA mobo driver to a usb stick and connected to the system. but still the same problem.

i also tried clear cmos, load default profie,

My questions:

1, how to solve this....

2, should i set native IDE mode before installing windows 7(also other windows systems?)

3, what is at least the correct way to install this.

4, is this a windows 7 installation issue or what?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved