Clash Between Sabrent 2.0 To SATA/IDE Hard Drive Adapter With Windows 7?
Oct 17, 2011
Interaction (interface?) between a Sabrent USB 2.0 to SATA/IDE Hard Drive Adapter Product Code: USB-DSC5 and my Windows 7 Home Premium 64-bit?When connected to IDE Drives Maxtor and Western Digital, and through the usage of Windows 7 it tellls me that the Hard Drive "is not ready". Is that a message originated by the Windows 7 software?If so how do I go about "getting the disk ready" so i could change disk type or number or sizes of each partition and/or reformat?unexpected report from the Windows 7 interaction with this adapter and the Hard Drives it holds, 40 GB and 80 GB IDE drives Maxtor and Western Digital. I am trying to use Windows (or some other third party software) to resize the partitions, change the disk type and eventually reformat.
View 1 Replies
ADVERTISEMENT
Apr 28, 2012
I am trying to access my wife's macbook hard drive via my Windows computer using the Vantec SATA/IDE to USB 2.0 Adapter. The Apple techs said they could not get the drive to register when they hooked it up. However, we gave it a good drying with blow dryerThe adapter works fine and all the correct drivers installedI am in disk management and the 250GB drive seems to be showing up. However, it is not showing up in My Computer and right click shows "assign a letter" is grayed out.
View 2 Replies
View Related
Aug 10, 2011
i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Oct 8, 2010
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
View 9 Replies
View Related
Jun 28, 2011
I've recently purchased two 30GB SSDs which I have set up in a RAID 0 array and I have installed Windows onto these drives. I have a second, 2TB Seagate Barracuda Green HDD that I have used to put my user profiles and additional programs/games on as it wouldn't fit on the SSD.Everything was fine for a few days after installation. Then this morning I rebooted the computer and it just stalled on the flashing cursor (underscore) in the top left corner of the screen. I did the basic fixes (Windows repair, checking RAM) and nothing worked.Then I thought that I should try disconnecting all but the SSD with the OS on it. SUCCESS! It booted to Windows but couldn't find any programs/user data so it created a new "profile". I shutdown the computer and tried reconnecting just the data hard drive.I have two additional hard drives (used for backups) that don't affect anything at all when I plug them in.Does anybody know what could be the problem? I'm at a loss and I need the computer
View 3 Replies
View Related
Dec 18, 2011
windows 7 pro 64 bit does not detect any hard drives - i have 4 sata - new install?
View 1 Replies
View Related
Nov 3, 2012
i installed a sata controller because the sata controller on the motherboard went out. I can easily install ubuntu but when i try installing win 7 it asks for a cdrom driver, when i try booting from usb it asks for hdd driver.
View 1 Replies
View Related
Jan 19, 2012
I am wanting to add a 3rd drive to my dell GX620. It has only 2 ports for SATA. Any good ideas on how to do this? Maybe convert an EIDE port?
I have a sata dvd writer, and two sata hard drives. Hoping to use them all. DVD writer is a lightscribe that's why I wanted to keep it.
View 3 Replies
View Related
Nov 27, 2009
My setup: XP on my C-drive with 2x SATA drives as slaves.
My requirement: I want to take my drives out and just use one of my SATA drives to install WINDOWS 7. If i tell my BIOS that my new C-Drive is that SATA drive, will i have to tell it again that my old drive is an IDE when i put that back in without the new SATA drive plugged in.
My reason: I have got the new WINDOWS 7 and want to install everything and update all my programs also have a good look and learn before i start having my work on it. It is easier for me to just unplug the power leads on each drive before i start then to have to redo all my work if i mess WINDOWS 7 up and have to format. I cant afford to loose everything.
Yes i could back everything up but i need to work while this is happening if you know what i mean.
View 5 Replies
View Related
Nov 26, 2010
I am trying to install windows 7 for a friend but the hard drive isn't detected within windows setup or within the bios. I have tried installing SATA drivers to try and get windows to recognise the hard drive but to no avail. Is there anything else I can try before assuming that the hard drive may be faulty?
View 2 Replies
View Related
Oct 11, 2012
My SATA hard drive has three connectors, power, SATA and to the right is an additional male four pin connector. What connects to that connector?
View 16 Replies
View Related
Sep 28, 2012
I have just fitted a SSD drive in my computer windows 7 64 bit system, when I installed windows onto the new SSD I just unplugged my old hard drive and fitted the SSD and just installed windows 7 and all worked ok. But after the new install was working I was told I needed to make a change in the BIOS to alter the settings from treat Sata as IDE to treat Sata as AHCI. I did this and all was ok with the new drive the installation worked and the new drive is running ok.
But now I have since read that I should have made the bios change before installing windows nad should not be done after the install, So do I need to reinstall windows 7 with the bios changes to treat sata as AHCI before I install or will it work ok it seems to be ok but im not sure now. I was also under the impression that I could still have my old hard drive fitted and just select the hard drive I wanted to boot from as the computer started, I wanted to do this so.
I could still has access to all my old stuff if I needed it. But now my old hard drive will not boot until I change the Bios back to treat Sata as IDE, so is this not going to work or will I have to change the bios each time I need access to my old drive. Also I have an Asus P6T SE motherboard so can I plug the SSD into any Sata port or is it better to plug it into number 1 if so how do I find which one is number one.
View 4 Replies
View Related
Dec 20, 2009
I recently embarked on the journey of building my first custom PC. Everything was going well, until I hit a speed bump of installing Windows 7 64 bit. So like usual I boot from the CD drive, and stick Windows 7 in. When it gets to the point where I'm going to install, it is unable to find my SATA drive to install Windows 7 on.
It then asks me to "locate drivers." So it gives me an option to browse, and when it does so I put in the disk that came with my mobo, but it's unable to find any drivers. I tried downloading drivers from my motherboard's web site, sticking them on an external HD, and locating them from there, but that still didn't work.
I checked in my BIOS, and my SATA type is under Native IDE. I tried switching it to AHCI, and my HD was no longer detected in the BIOS, switched back to Native IDE and it found it again. Also, Onchip IDE Channel is set to Disabled, and Onchip SATA Control is set to Enabled, does this matter any?
I was wondering,though, is it possible that if I set the SATA type to AHCI, move the SATA cables into ports so that the drive is recognized by my BIOS, use the AHCI drivers I downloaded, Windows 7 will detect it?
View 5 Replies
View Related
Mar 1, 2010
How to Install and Setup a SATA Hard Drive ?
View 0 Replies
View Related
Jun 1, 2012
No success getting windows 7 to install with 2 TB sata hard drive. It reads on BIOS but when installer setup for W7 it stops in the beginning with "required cd/dvd driver missing"; asking you to go ahead and remove your installer disk for that particular step only.
View 1 Replies
View Related
Jun 8, 2011
Intel Core i7-960 3.20GHz LGA1366 CPU BX80601960
MB Intel BOX DX58OG
PSU Corsair 600W
MEM 4G KST KVR1333D3/4GR x3
EVGA GeForce GTX 560 Ti
Western Digital 500 GB SATA 6.0 GB-s Internal OEM Drive WD5000AAKX
Western Digital 2 TB Caviar Black SATA 6GB/s Internal OEM Drive WD2002FAEX
Just built this machine. Installed Windows 7 on the 500GB drive. Both drives are plugged into the blue SATA 6GB ports on my board. My drivers for these controllers are Marvell 91xx SATA 6G v1.2.0.1002 (Dated 3/7/2011). The second 2TB drive shows up in BIOS as well as Drive Management in Windows, but it will not be recognized as an accessible drive that can be formatted, partitioned, or anything. I get an error each time I attempt to format or partition through Drive Management. When I plug the 2TB drive into one of the other (black, Intel) SATA ports, the drive works fine, but in the blue ports it just won't seem to work. The 500GB drive, however, works perfectly as the boot disk in these ports.
View 9 Replies
View Related
Jan 30, 2010
I built a new computer. Rather expensive, but it should perform well. -Anyway-, I bought a brand new hard drive with the expectation of installing windows 7 on it and then working from there. The hard drive is recognized in the BIOS, the CMOS, and anything at all I've checked, but when I put the windows 7 64 bit disk in and try to do a custom install, seeing as I have nothing on the disk from which to upgrade, my hard drive does not show up in the section in which 7 asks where I want to install.
Motherboard is GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard, hard drive is Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive.
The hard drive is plugged into the top SATA port (It has like, 10).
What can I do?
View 27 Replies
View Related
Sep 20, 2012
find a solution to how open sata slave and master hard drive on a desktop
View 1 Replies
View Related
Apr 7, 2011
My D 200gb SATA hard drive disappears around 1-90 mins while on windows 7. I have tried registry repairs and alot of things. Its not faulty cables because i used to have win Xp on exact same computer but reformatted to windows 7. Rebooting makes the hard drive reappear but it still disappears after a while. It still shows up in the bios though. When it disappears, it is completely gone, even in device manager.
my important data is on my 200gb D drive and i only use C for my os and some other things like Firefox because its only 80gb
View 9 Replies
View Related
Oct 22, 2011
Ive got a samsung 1tb/5400rpm/8m) i need the driver to load in on insall of windows 7.
View 1 Replies
View Related
Mar 4, 2012
I have a Dell Inspiron 1545 laptop. I recently developed hard drive trouble and have had to order a replacement.Instead of installing Windows 7 all over again, with all the drivers, etc., I want to clone my existing hard drive to the new one.I intend to connect one of the hard drives to my system via a USB SATA cable with the other drive connected inside my system.
View 2 Replies
View Related
May 26, 2012
I formatted and installed windows 7 64 bit in a pc which previously had windows 7 32 bit. When i booted my 1tb dynamic disk was not detected. So I went into disk management and it had listed my disk as "Foreign Disk". So i imported the foreign disk.
The drive was detected and opened. So i rebooted the pc but now the drive is still not appearing in my computer. When i go to disk management the 1tb appears but there is no drive letter assigned. When i try to assign drive letter it statest that "Specified File cannot be found"
View 1 Replies
View Related
Aug 24, 2011
I just got my new Vantec IDE/SATA to 2.0 USB Adapter installed. I use it on my laptop to give me extra storage space.. or plan to.. this drive already has a good copy of Win 7 installed and i'd like to boot into it from the USB adapter so it will be easier for me to find out what i need to back up.
I did try to boot from USB and windows does start to load then crashes.. I don't know if it's due to the Vantec unit or if I just need to repair the MBR on the drive. The drive has been sitting in a safe place for about 8 months not being used.
View 7 Replies
View Related
Feb 2, 2011
In the past I've migrated 7 from one hdd to another by doing a backup to a usb drive, then swapping the drives and restoring to the new one. What I need to do now is a twist on that. My MB is one of the new p67s that has the faulty intel sata ports, and will eventually be recalled. The 4 6Gps sata ports on the board are not affected by the chipset problem, so I plan on just using them instead (plus I just got a 6G seagate drive that I wanted to use anyway). What I envision happening is restoring to the new drive on an entirely different sata adapter and port #, and the system not booting. I assume I could get around this by booting to a command prompt and using bcedit, but am not 100% on that.
View 6 Replies
View Related
May 7, 2011
i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
View 5 Replies
View Related
Apr 12, 2012
Just built a moderate spec gaming PC from scratch, and all has went according to plan except when I try to install Windows 7, my hard drive won't show up. My new motherboard doesn't have any IDE slots, but I only have an IDE hard drive. I am using a 'Pluscom Serial ATA PCI Adapter' to connect my hard drive to the computer as it has 1 IDE slot on it. I don't have a disc for drivers and don't know where to start. I am running Ubuntu on it at the moment so I can download any drivers I may need.
View 9 Replies
View Related
Jun 12, 2012
When I installed a TF III GTX 570 video card I lost my PCIE-X1 slot and 1 SATA port on the Inspiron 530 Foxconn G33-M03 MOBO I am still running. Now aside from the fact that I need to upgrade the MOBO...
I added a Rosewill RC-209-EX PCI-SATA adapter (SiL3114) to gain back 4 SATA ports. The card is working fine. It is slow compared to the MOBO SATA ports but I expected that. I have a Seagate 500GB HDD and an Optiarc DVD R/W drive attached to it. BUT..... I can not boot from either device. They do not appear in the boot options....
Based on my reading I got the "NON-RAID" (IDE/ATA emulation) BIOS from Silicon Image and flashed the card's BIOS since I will not be using it for RAID. It is just for more SATA ports. Should I be able to "see" the PCI-SATA card and its attached devices in the 530's BIOS Setup Screen? Is it a limitation of my Dell neutered BIOS?
The RC-209-EX documentation specifically states it "supports" CD/DVD drives.
There is plenty written about booting from a RAID array configured to the RC-209-EX but very little about booting from single device.
View 3 Replies
View Related
Mar 11, 2012
I have a Sabrent TV-USB20 and running Windows 7 Ultimate x64bit on my PCinstalled the driver for my platform on Sabrent USAall 3 options, tried one after another, I installed them on my computer, but still after this, the computer does not recognize the device.I go to install manually through Add Hardware or device manager and Windows says that the driver is not compatible with windows 7 64bit (even when I'm installing driver for Windows 7).
View 9 Replies
View Related
Sep 30, 2011
I brought two brand new Sabrent 6 Channel 5.1 Sound 3D PCI Sound Cards. Installed both on two exact systems except one is running windows XP and the other is running Windows 7 Ultimate 32bit.
No problems installing card and driver in the XP machine, but the window 7 doesn't even pick up that's it's there. I tried to installed the driver hoping maybe this will cause windows to see the card but the installation starts and after a few seconds comes up with and error message that says "Do not support this platform 0" this is coming from the CD that came with the card.
I tried downloading and installing the driver from Sabrent, and C-Media and with each installation attempt same error message.
View 5 Replies
View Related
Jan 11, 2010
I purchased a SBT-SP6C which is on Microsoft's Windows 7 acceptable hardware list. I've installed it and downloaded the Windows 7 drivers fromthe Sabrent website. The device shows up in my system, but I get no sound. I know my speakers work because I hooked them up to an external source. I can hear some feedback when I unplug the jack.
View 9 Replies
View Related