I have installed windows 7 ultimate x64 and i am really impressed by it.
but i have a question for you, i have a second 500 gb sata hard drive which i have connected after the install which is formatted with ntfs file system from my original windows xp o/s , it shows up in device manager but will not work , windows ask me to format the drive which i dont want to do because has loads of files on which i dont want to lose.
am i missing something they both use the ntfs file system .
i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
I've just finished building my new computer and I'm getting BSOD errors when first formatting a hard drive and secondly (after a successful format) installing a game on it.My boot up SSD drive seems to be fine, it's just my other hard drive.64bit Windows 7 Home premium. Full version I bought a a few days ago. The whole computer is new. If you need any further information, let me no.8GB RAM. Intel Core i5 2500k CPU. Radeon 7850 graphics. 120ish SSD. 1Tb hard drive. Asus P8Z68-V Pro gen3 motherboard.Edit:having just seen a notice, I've updated the post to contain two attachments. Or atleast I think I have
I am having a problem formatting a drive. When I first built this computer, I had two 500GB HDD's installed. Originally I installed XP on the machine. Some time ago, I installed Windows 7 on my other drive. I have been using Windows 7 for months now, and I no longer wish to use Windows XP.
I am running out of space on my Windows 7 Drive, I originally only allocated 90GB to it. I want to format my XP drive so I can move things around and get more space, but I cannot reformat, disk management gives me the error, "Windows cannot format the System Partition on this disk."
I REALLY REALLY do not want to have to reinstall windows 7. I basically want to format the XP drive and make that my new media drive, and extending the current Windows 7 drive to include the space that I will gain from moving my media drive.
I'm currently dual-booting Vista and 7, and I want to get rid of Vista, but I'd like a couple people to just confirm for me that I'd be doing it correctly because I don't want to mess up my MBR or anything like that.
I currently have Vista on my C drive and 7 on my F drive. If I go to Computer Management and then Disk Management, this is what I see:
First, because I have a ThinkPad, I have Q and S drives. But I believe they're irrelevant to this question.
My C drive, with Vista, says it's an NTFS drive, "Healthy (Primary Partition)".
My F drive, with 7, says it's an NTFS drive, "Healthy (Boot, Page File, Crash Dump, Logical Drive)".
If I were to just flat-out right click on the C drive with Vista and click format, and then restart, would I be screwed? Or would it load 7 because it would be my only OS? And if this would be a problem, how should I go about removing Vista?
i had originally windows vista on drive C and then i installed windows 7 on drive E, then i wanted to try windows 8 so i deleted windows vista form drive C and installed windows 8 ... now i tried deleting/formating Drive C to put another OS on it but i couldnt delete the windows folder, im guessing its booting from Drive C into windows 7 on drive E.i used Easy BCD to remove the windows 8 boot entry since im not using it.so what should i do now? how can i format drive C and still make windows 7 boot correctly?
I just placed an old hard drive into my computer to use as a slave. After I booted up on my current hard drive I went into disk manager and tried to format all the partitions. I formated one easily but the other won't seem to format. The option to format or delete volume are both greyed out.I then tried to boot from my Windows 7 disk to format the drive that way but it said it could not format dymanic drives. I can't change the drive to basic without deleting the last simple volume.
i have only C drive in my laptop and i dont know how my laptop messed and i am unable to turn that on ?(accidentally i turned it off while it was updating), i have re install windows in my laptop. so is there any way out that i can recover data from my C drive.
Have XP on C drive and looking to install Win 7 on 2nd Sata drive for dual boot. However, when installing a 2nd Sata drive my XP bios identifies it correctly as a Sata drive but my PC Disk management recognises it as a Removeable disk preventing me from installing Win 7. I have tried a couple of different Sata disks with the same result.
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
I'm fully formatting a second hard drive in my computer and it's a 3tb drive so it's going to take a while. I was wondering if I could watch videos I have on my other drive or if that would cause the process to run less efficiently or even skip sectors it was supposed to check.
I had a really bad virus on my Dell Windows 7 computer. I am now trying to format the Hard drive and load a new version of XP on the system. Every time I try to format the hidden volume. I get Cannot Format x: this volume is write protected. How do I un-protect this volume so I can format this hidden volume.
i need to completely remove all from my hard drive so that i can run my restore discs i purchased from gateway- my computer is 6 mos old and came without dics as it had restore capabilities pre installed from factory.
I am using OS 7. One Day suddenly a Pop Up message displayed and shown as E: Drive Corrupted. After Restarting my System The Drive is Not Opening, And it is mentioned in the drive NTFS. After opening the drive a message is display. "E: is not accessible. Access is denied". How to reopen my E drive without formatting.
I have recently partitioned my c drive, to create a new drive g, i installed w7 on g and its fine and works...
c drive did have a version of vista on, i planned on downgrading it to xp...
i messesd something up trying to install xp over vista so booting up using w7, i manually deleted all the files from the c drive.... now its totally fubar, it wont let me install anything on it atall...
how can i format the c drive which is my primary partition... or so something with it? combine it back into the g partition or anything..???
i can only access my pc booting up using w7, which is running on the g partition..
I was doing some programming for school and then the IDE stopped working and so did Windows, itself, but I had to get somewhere, so i forced myself to pull my 1 GB usb drive out without safely removing it. Still it was acting weird, so I just shut it down. Now I put the usb back in, and apparently I have to format it. I don't want to because I didn't back up recent work but eventually I had to choose to format it.
Initially when I went to format it, the format size was still at "0.98 GB" but now, it changed to "8 MB" even if I try to format it at 8 MB. Quick format provides a "Windows was unable to complete the format". Normal format provides a similar error. Diskmgmt formatting provides a similar error.
I never had a problem like this before (even when pulling out drives at time when it failed to respond) but I would still like to utilize the usb. Is there a way that i can retrieve the 1 GB back?
Is there a way of formatting a drive without deleting windows? I am trying to install windows 7 with a legitimate key on a hard drive, however I do not have a CD. Is there any way of installing windows 7 without a cd?
I had Genuine windows 7. But while trying to partition my C drive error occurred and i had to completely format my hard disk. Now how can I re install my windows 7 or regain it back as before??
I bought new hp laptop.. it came with 500 GB harddisk, windows 7 home basic, I didn't get any windows cd apart from recovery in hard disk. My windows is installed in c: and that is the only drive that it have... now the situation..
1) I want to partition my harddisk without losing windows means I don't want to format C: drive 2) I also want to install linux in dual mode with windows..
Second question is related to first one because I don't need any method that may lead to situation like I can't install any other operating system.
