I will be replacing my PC's MoBo soon. My PC came with Windows 7 Home Premium 64-BitI want to upgrade the motherboard, but I heard that I will lose my OS. Is that true?If so, can I reinstall my OS (I have the product key, but no installation disk)? Will I lose my data as well?
View 4 RepliesI have just replaced my motherboard after the original was fried by a lightning strike. I'm thrilled that the computer now is working (I'm not a computer geek so replacing the motherboard successfully was a major triumph for me). However, now I am getting messages that I cannot use Windows update since my Windows 7 does not pass the validation test. I went to the Microsoft site and downloaded software to test the validity of my operating system and (hopefully) reregister it, but was unable to. I have the product key for the software but the Microsoft program doesn't even ask for me to reenter it. How do I re-validate my operating system without having to purchase or reinstall the software?
View 2 Replies View RelatedMy motherboard failed. I can't boot into my existing win7 OS anymore. I will have to install a new board, which usually means, complete new installation and loss of all settings and updates (2 years) Is there any way or tool to transfer my existing OS, with all settings and programs intact into the new hardware environment?
View 6 Replies View RelatedI've had my notebook for about two and a half years now and its starting to run slow and lag often. I noticed that the cpu usage when just browsing the internet is around 50%, when watching a movie around 70%, and when playing a video game or using a big program around 90%. The notebook has a relatively slow cpu speed (1.2GHz). Is it possible to put a new cpu in my notebook without replacing the motherboard as well? It also has 4gb of RAM which I am going to upgrade to 8gb soon. I was just looking for ways to upgrade my current pc.
View 2 Replies View RelatedI have a burnt up motherboard in my laptop. My question is do I have to match the exact model to the one that is in there already inside? Or can I get one alittle cheaper? The one that is inside is around $200, and I was hoping to spend a bit less.Me and hubby can replace and change out anything on a desktop, and even build one from scratch.But laptops aren't our thing.This one is an ASUS K52F REV 2.0. Any suggestions, or do I have to match it up with what is factory?
View 2 Replies View RelatedI have an Intel Motherboard which I am changing to a Gigabyte one.If I were to do this myself, I would take proper steps to insure that Windows will boot with the new hardware. I would update my Intel Sata controller driver to a Standard AHCI 1.0 Serial ATA Controller. Then, SHUTDOWN the computer (not restart), then install the new Motherboard and all should be fine. Windows should install the new drivers.The problem is, my computer is being serviced for free at the place I purchased it from. So I don't have access or communication with the lab. I'm sure they are professionals but I want to be sure they don't mess up my C drive or drivers. So I have a few choices:
1. Update the controller driver to Standard, turn off the computer and send it to the lab (maybe with a note, asking that they install the motherboard BEFORE they turn the computer on).
2. Trust them that they know what they are doing and hope they will first turn the computer on, uninstall the Intel controller driver, and then install the new motherboard.
I'm changing my motherboard and would really avoid to reinstall windows 7. Is it possible without causing too much instability ? CPU, RAM, video card and all other hardware will stay the same.
View 11 Replies View RelatedI am replacing my mobo shortly. I am running Windows 7 and XP dual boot, I am using the same cpu, graphics card ram, drives etc. I don't want to reinstall at the moment, how do I go about getting it all to work correctly?
View 8 Replies View RelatedI want to upgrade my MB on a Windows 7 system. However, I do not want to reinstall Windows or any of my apps. I simply want to plug in my HDDs and boot into Windows as before. The existing board is an Asus P5B Deluxe. The new MB is an Asus P8Z68 Deluxe. I have two SATA HDDs installed. One of these drives contains the OS as well as three other data partitions (yeah, I know, bad idea). The IDE ATA/ATAPI controllers in device manager are set to the following:
Intel(R) ICH8 2 port Serial ATA Storage Controller � 2825� �Intel(R) ICH8 4 port Serial ATA Storage Controller � 2820�
I�m guessing that if I simply reinstall the HDDs on the new MB, the system will not boot because it won�t recognize the drives. So, I was wondering if I could change the storage controller setting to �Standard Dual Channel PCI IDE Controller� in Device Manager prior to installing the new MB and just before old system shutdown. That way, when the new board is installed, prior to the next startup, the system will hopefully recognize the HDDs and boot into Windows.
I have a sony vaio netbook with W7 starter but it is in Spanish! I have W7 ultimate on my external HD and want to replace the W7 starter on the sony with the full ultimate version.
View 4 Replies View RelatedWhat critical issues should I be aware of in the event I would like to REPLACE W7 os with XP3 os on a new laptop with 64-bit / 2GB ram
View 1 Replies View Related915 motherboard intel support chipset motherboard sound, vga, usb drivers download
View 1 Replies View RelatedSo yesterday, i opened my laptop to change the keyboard. But when i turned the laptop again, everything worked except that at the batttery icon there is an X. And if you click it it sais ''consider replacing your battery''What to do ?
View 4 Replies View RelatedI keep getting a message saying 'Consider Replacing Battery'. I'm running Windows 7 on a Toshiba A300. I've read that this is a problem with Windows 7. I'm wondering if Toshiba has a fix for this such as a fix for the BIOS.etc or maybe a driver? It looks like I should downgrade to XP..
View 9 Replies View RelatedI thought my problem was a bad SSD, and so did Crucial, but after having it replaced under warranty, I am still having the same BSOD's.
I tried to follow instructions and have attached a zip file with the minidump files analyzed. I have a Sony VAIO VGN-Z570N laptop with a clean install of Win 7 Home Premium 64 bit.
yesterday i was just replacing a new RAM into my pc, bcoz there was something wrong w/ it. (BSOD happen lots of time). Im using a 2x2Gb of DDR3 RAM.
But recently, BSOD keep happening again, so i switch the slot of the DDR ( from slot 1 to slot 2, and slot 2 to slot 1), and everything seems fine until now. I had run the furmark, and the test completed without any interruption.
The question is why is this BSOD still occured while i'd replaced the RAM?
I have an HP g42-415dx laptop with Windows 7 64 bit and AMD Dual-Core Athlon II P340 which I would like to replace for a faster AMD Quad-Core Phenom II P960 from e-Bay.
View 4 Replies View RelatedI have an overclocked Athlon II X4 and I wondered if I needed to do anything before I replace the CPU? Should I remove the overclock?
View 4 Replies View RelatedI am replacing my motherboard with a Asus P8Z68 Pro and adding a Patriot Wildfire 120GB SSD. I will install Windows 7 Pro 64bit SP1 on the SSD. Windows 7 Home Premium 64 bit is currently installed on my WD 300GB drive and configured as my C: drive. Can I leave the WD HDD unconnected, connect my SSD and install the new Windows 7 Pro then connect the WD HDD and maintain a dual boot system for a while while making sure everything is working properly?Will the SSD automatically configure as C:After things are working can I just wipe the boot sector on the old HDD and leave the data intact?
View 1 Replies View RelatedI had been reading Sevenforums before i actually join it. Eversince then i got most of my doubt solve.I just bought a Sony Vaio Y series come with Windows 7 Starter.I got a bad deal form Malaysia giving windows 7 stater and 320gb hd, whereas S'pore giving Windows 7 home premiun and 500hd. Anyway i like the design and portability of this model.I got a Year Warranty, But i'm wanted to upgrade it to Windows 7 Ent. and also wanted to upgrade my ram to 4GB max. my existing one is 2GB. but i afraid this would void the warranty.Let get my question i wanted to update to Windows 7 Ent with out and not keeping my starter. but i afraid of driver issue, i plan to boot by USB setup.
View 5 Replies View RelatedI've bought a second-handed NP-RC530-S06 with a dual boot (win7 and Hackintosh). As I wanted to restore the notebook to factory status, I inserted the DVD (attached to the package) and installed win7. In fact the recovery solution was not accessible by pushing F4; probably the previous owner deleted the OEM partition... By the way, after the OS installation, the PC was (obviously) missing the drivers and the samsung software. I know I could download the samsung stuff from the support page but my idea was to get back the OEM partition.Thus, using testdisk, I re-spawned the OEM partition getting the following:
- name: SAMSUNG_REC
- hard disk letter: D.
- partition type: Primary
is it possible to restore the link between the F4 and the OEM partition? What would be the procedure?
Newegg.ca - XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Cardis my current and old card, I'm trying to find something under the $200 price range again with better performance... also, the card should preferably be the same size lengthwise...8.5") I can probably jam in a 9.2" card..
View 9 Replies View RelatedI have a three yr old hp Pavillion desktop. HD has totally conked out. Was going to just get a new one, but was wondering about the feasibility, and ease, of just replacing the HD. What am I letting myself In for ?
It looks like it will cost me around $ 100 to buy a new drive, so it will be a pricey experiment if it does not work out. Lost a lot of the paperwork, so am not fully sure as to what,is in it now. I looked inside, and apparently it is a Seagate 1 TB drive. 7200 rpm. SATA, 3 GB/sec
Has the dimensions of approx. width of 4 inches and depth of 6 inches. Is this what is called a 3-1/2 inch drive ? So, what do you think ? Worth a try ?
Will the electronics in this 3 yr old pc support a new hd with its built in new electronics O.K. ?
If I decide to try just replacing the drive, what should I buy ? What should I be aware of In regards to buying a hd for my old pc ? And, do they come pre-formatted ? If not how is this handled ?
Are there still master-slave jumpers that need to be set on the new hd ? After installation, do,I just run the "Restore" disk set of 3 disks to get Windows 7 on it again ? Do these restore disks that I created when I first got the pc have Windows 7 already on it ?
Not all that sharp with this stuff, but am a retired Engr., so reasonably comfortable with this kind of thing. Still, I would not really want to dump $100 if there are lots of potential pitfalls and caveats I am not considering.
I've found this guide Windows 7 Installation - Transfer to a New Computer for changing all my components except HDD.My question is, I currently use my install as an HTPC. If I use the sysprep method, will the codecs (ffdshow etc) work correctly afterwards, or will I have to go through installing them all again?I understand graphics drivers will need re-installing.
View 3 Replies View RelatedMy hard drive died a couple of days ago and I was wondering if the only way to get the operating system back onto a new one is to purchase a new copy? Kinda new to this so am unsure what to do since it didn't come with any sort of OS recovery cd when I bought it.
View 5 Replies View RelatedHOW TO FORMAT PC FROM PENDRIVE
View 2 Replies View Relatedim just wondering if there's something wrong with mylaptop's battery as its showing this"consider replacing your battery" message on the lower right hand corner.
View 1 Replies View RelatedI upgraded my dell studio 1535 from Vista 64 bit to 7 professional 64-bit and now have problems with the keyboard (It's usually recognized, but keystrokes are often not recorded. Sometimes it doesn't work at all). USB devices work fine. I have my Vista OS under c:Windows.old so I would like to replace the 7 keyboard drivers (i8042prt.sys and kbdclass.sys) with the Vista drivers of the same names that are in c:window.oldwindowssystem32drivers Will this cause any problems? If not, how would I go about doing this?
View 1 Replies View Relatedi was on [URL] and found win8 login for 7 i replace authui.dll in system32 and sysWOW64 also replased basebrd.dll
then tried it out by switching user i got black screen then rebooted and i still got a black screen
then i booted into startup repair and then it gave me an error now i have startup repair infinite loop
I'm replacing my mobo/cpu with Sandy Bridge parts when they become available tomorrow, and I'm hoping to be able to move my data partition over without wiping it. I've currently got my drive partitioned up such that C is Windows 7 and basic programs, and the D drive includes my Steam games and other data. I know that a new mobo means reinstalling Windows, so will I be able to just wipe the C partition, keep the D partition intact, and then reinstall Windows 7 over the C partition on the new computer without issue, or will all the programs on D fail to recognize and function with the new Windows 7 install?
View 8 Replies View RelatedMy hard drive crashed and I am replacing it with a new one. Can I just install a fresh copy of windows 7 on acer aspire 4810t without having to do any upgrades? I cannot upgrade until windows 7 is installed first. Is that possible?
View 2 Replies View Related