Computer Crashed While Running Solidworks Wont Startup Anymore?
Nov 6, 2012
I had a bit of bad luck today and my laptop fell on the ground and cracked the case. I checked to make sure everything was functioning and running alright and everything seemed fine, so i proceeded to run solidworks and work on a project and again everything was working fine for about 40 minutes than blue screen popped up and computer tried to restart. When it started backup a screen popped up saying to run startup repair. Ran the repair and when a command window popped up i get a white screen saying error in big red font. So i restarted again and tried to start windows normally it began starting up but switched to start up repair automatically and same thing while start up repair was beggining.to stop happening preferably without re formatting and losing files as i have some really large solidworks files that i need for a project and dont have time to re draw
View 1 Replies
ADVERTISEMENT
Jul 9, 2012
I recently bought a new power supply, along with more ram because I was already ordering the power supply. When the package came and I set everything up in the computer, the PC turned on and everything was fine. I started to play a game with my friend and the computer just turned off. No error message, nothing. I believe the computer overheated, but I could be completely wrong. Now, when I start my computer up, it gets to the Launch System Repair (Recommended) or Start Windows Normally. If I select one of them, it will get into the 'Starting Windows' screen with the orbs, and then the monitor will just go blank. The computer still runs in the background, but my monitor just is blank. It is not the RAM (I switched and went to my old RAM) And I also cannot boot into safe mode, or anything of the sort, as the same thing happens. And I cannot boot from a CD (Tried with a windows 7 repair disc and computer goes blank again)
View 9 Replies
View Related
May 1, 2011
My computer is running normally but without the Welcome screen at startupAfter the Windows7 logo the screen goes black and does not show anything (the blue Welcome screen) until it auto login to my desktop.If I create 2 account, I will have to blindly press enter to choose an account to login. But after log off I can see both of them.Normally its fine but if there is some updates, the computer will install the updates under black screen.
View 6 Replies
View Related
Apr 29, 2012
I recently got another different BlueScreen, with an older not resolved. I got two BCodes, 0x000000c2 and 0x0000005a. I ran 'chk dsk /f' and ' sfc /scannow' and got no errors. Latest BSOD Earlier BSOD
- x86 (32-bit) or x64 ? 64 bit Windows 7 Ultimate
- the original installed OS on the system? Not originally installed. - an OEM or full retail version? Retail. - What is the age of system (hardware)? 2 months. - What is the age of OS installation 2 months. I attached 'Windows_NT6_BSOD_jcgriff2' and 'perfmon.html' below.
View 1 Replies
View Related
Nov 1, 2011
My laptop has been running extremely slowly lately. It takes longer than usual to load regular programs and any web browser activity takes ages. I have run malware (Malwarebytes) and virus scans (Microsoft Security Essentials) and removed some items. Malwarebytes didn't detect much, but I found a trojan with Security Essentials. However, after removal my problems persist. I have scanned and attempted recovery of bad sectors. Issues were found and fixed, but a disk check was said to be necessary. I tried running chkdsk c: /F, but the disk check cancelled within a fraction of a second on startup.
View 6 Replies
View Related
Nov 3, 2012
My Gateway laptop running Windows 7 Home Premium (x64) recently crashed, and when I rebooted it, it displayed this: Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required devices is inaccessible.
The thing is, I don't have a Windows installation disc! I was just browsing the internet when my laptop crashed, and now I can't do anything; repair your computer, safe mode, boot from last known good setting, etc. all result in the same error screen.
View 1 Replies
View Related
Feb 22, 2011
I have a Toshiba Tecra A10 running on a Win7 operating system.It suddenly crashed and now starts up with a blank screen and a blinking dash and wont go anywhere from there.
View 1 Replies
View Related
Nov 16, 2011
Disclaimers out of the way, I'm getting random BSOD's, seemingly to always to coincide with my usage of Solidworks (ver.2009). Although, to be fair, this is my work computer, and SW is always running, so it may be unrelated.This is my first foray into debugging BSOD's (only recently started doing IT stuff), so I *think* I know what I'm doing, but we all know how that ends. I've attached the jcgriff.zip, but I couldn't seem to get my perfmon /report to finish it's 60 second test for an output report (working on getting administrative rights, will update accordingly).I've also attached the two .dbg files I've found to help better understand.It appears to be an error involving Memory Dumps and ntkernal errors.
View 1 Replies
View Related
Jul 6, 2012
I loaded Solidworks 2001 with OS Windows 7 and used the compatibility xp mode, it works just fine. But when I click any Hypelinks i get a blank tab and won't open. If restore my Windows to before I installed Solidworks, everything works just fine.
View 1 Replies
View Related
Dec 27, 2011
I have a serious problem with a recovery which did not solve the problem. I now have no internet the screen is wrong the icons and programs have disappeared and I just cannot use the computer anymore. can someone let me know if I can recover the system by running the program in safe mode or how can I recover the system to to yesterday's setting.
View 9 Replies
View Related
Feb 16, 2012
playing around with my new computer, i was trying to record a sound playing on Internet with the microphone using the sound recorder. after about 10 seconds, the whole system froze - i couldn't even move the mouse cursor and had to unplug the computer and re-boot. what's the problem and is there an easy fix? below is a screen shot of my system specs, if that's any help.
View 1 Replies
View Related
Feb 17, 2012
as the title says, I was just talking with some friends on skype and then the computer froze like when it's going to give you a BSOD but instead of that it just froze, so I turned it off and now the computer won't even show BIOS menu. RAMs are fine, they were tested by the retailers for 48 hours with memtest and tested by me for 24 hours (when the computer used to work).So to give you a clearly idea of what's happening, I press the power on button, there's a beep and the computer starts, right? my pc powers up but it never beeps, the CD/DVD reader works, the processor starts up, but it's just stuck there. I checked on the motherboard's user guide and it doesn't say anything about "not beeping"
View 9 Replies
View Related
Feb 17, 2012
I've only had my new computer with Windows 7 for just over a week and it won't work anymore. It goes into Startup Repair and says it can't repair this computer automatically. I press "Finish" and then it just restarts again showing the logo of the motherboard on screen and then goes back into Startup Repair again.
I called the shop where I bought it and they said it is possible I was loading too much software on too quickly. It is a computer I use for business so I wasn't loading any rubbish on and I didn't install that much - Office suite, antivirus, modem software, printer driver.
View 9 Replies
View Related
Nov 26, 2011
I just got my first computer in place i installed win 7 on it and everything went smooth, but then i realized i had by misstake installed the 32bit version..so i checked the SSD, which is the only kind of storage drive i have right now, and for some reason the installation had made an partition called system drive or something on 100mb. the stupid thing is that it was nothing on it?? windows was still on C:? anyway , after many minutes of thinking i decided to just reinstall windows over the old one and so i did. it runned smooth and went perfect, i checked the preferences of my computer and as planned i now had the 64 bit version but 30Gb was lost on my SSD? i discovered that the old windows was still there, in the windows.old folder... i didnt think about much so i'd just pressed delete...
the crash: loud noise came from the computer and it shut off, now i cant get it to work!!!!!when i start it all the lights starts and the fans runs but nohting moreand how do i format the ssd so i can use it when i've fixed the computer!specs:Motherboard: MK Gigabyte Z68X-UD3H Socket 1155, Z68 CPU:Core i5 2500K Graphic: GK EVGA GeForce GTX 570 SC RAM:Corsair 8GB (KIT) DDR3 1600MHz/VENG. Drive:SSD 120GB Corsair SATA 2.5", Force 3 Series Cooler:Cooler Master Hyper 212 Plus CPU cooler AMD/Intel PSU: XFX XPS-750W BE ATX 12V EPS 12V
View 7 Replies
View Related
Feb 26, 2012
Computer threw out a bunch of weird language and then said crash and shut down. Now it doesn't really boot or reboot. I have to pull the battery to get it to restart and I get the HP logo when I put the battery back in and it takes me to a Windows Errory Recovery screen with two options: Launch Repair or Launch normally. Neither one of them does anything. I just get the blue screen.
I've tried the f8 key and the f10 key and can't seem to get to any other screen. I put the restore disk into the CD rom drive and I don't think it's accessing it at all.
It is an HP Pavilion dv7-4087cl with an Intel Core i5-430M processor and its running Windows 7 Home Premium OA 64 bit.
View 1 Replies
View Related
Dec 18, 2011
I am no expert when it comes to computers so please bear with me. My Acer Aspire laptop crashed on me. It uses Windows 7. Start up repair does not work. I have a set of Windows 7 disks, 32 bit and 64 bit. Not too sure which one I should have used so I tried both with the same results. I have tried to re-install Windows 7 again as well as repairing the Windows 7 which is already on my computer with the disks with no luck. When re-installing it gets stuck at 'Setup is starting'. It stays like that for hours. When I try the repair option it gets stuck at 'checking for operating system' or something to that effect, also for hours on end
View 9 Replies
View Related
Jan 9, 2012
My computer crashed today and I can't get it to boot up. I can hit ESC during startup and get the menu. I ran all the tests and everything passed. I am trying to create a Windows 7 disk so I can boot it from there since my computer won't start up. I'm not sure where I can download this.
View 7 Replies
View Related
Jul 31, 2012
i was on [URL] and found win8 login for 7 i replace authui.dll in system32 and sysWOW64 also replased basebrd.dll
then tried it out by switching user i got black screen then rebooted and i still got a black screen
then i booted into startup repair and then it gave me an error now i have startup repair infinite loop
View 6 Replies
View Related
Sep 12, 2012
I am writing this windows safe mode.Cannot get computer to boot in reg mode. Sat for 40 minutes, with message "please wait while windows configures"Am running windows 7, 64 bit home, Dell Inspiron 570 It started yesterday when it downloaded updates for Windows. After the restart, the computer screen looked strange and could not open any programs. Went to "start" and re-booted, same thing happened again. I again went to start, this time it came up with 2 errors. (wish I had wrote them down) but said something about windows cannot find such and such. (sorry) Anyway, clicked on the "X" and windows came up again, but nothing would open. Had to hard boot as the start button would not even work.Rebooted into safe mode and have tried to return to a previous restore point. Seems I don't have any. So can't do that. I did go go to the recent installed windows updates and deleted them. But will not let me change the settings as in: Don't install updates automatically. I don't know if it is trying to install those over and over again. I tried to get it to come up again with the errors, but no such luck, it just sits with the blue welcome screen, then the "please wait"
View 9 Replies
View Related
Jun 16, 2011
My computer crashed and I lost all my Sims data. I tried to reinstall with the original discs but when I got to the 20 digit code on the box, it said it was invalid (probably because it belonged to me). I had installed Sims 3, Expansion packs World Adventures, and Ambitions. I recently bought Late Night, but my computer crashed before I downloaded it. How can I reinstall these? Will any of the work I did on each one be restored, or will I need to start in the beginning of each one?
View 1 Replies
View Related
Apr 24, 2011
I've had problems with my wireless printer going "offline" a lot and its one of the most frustrating situations when you go to hit print and theres a 35% chance it will be offline.
Now I tried to "Add a new printer" and for some reason after trying time after time my computer is not discovering my wireless printer any more?
My printer sucessfully pairs up with my router every time I try to go through the wireless setup wizard. I've restarted/unplugged the printer time & time again & also restarted the computer.
how to get my computer to see this printer again & KEEP it online?
View 5 Replies
View Related
Feb 9, 2012
My computer just crashed due to the reason "IRQL less than or equal" or something along those lines, because it was only up for a second before my computer crashed. Minidump file is included in case anyone can help me. I think it might have to do with my ram, because ever since i bought it (around 2 months ago) i have crashed 4 times.
View 1 Replies
View Related
Feb 25, 2011
When I installed Windows Live Essentials 2011 on my new Compaq Presario CQ5621F with Windows 7, it seemed to load fine. I tried to access the internet and got no connection. When I rebooted my computer it suggested that I restore to an earlier time. Upon doing so it works fine again.
View 3 Replies
View Related
Nov 12, 2010
Yesterday night I turned off my computer by pressing the power button and now my mouse and keyboard do not work anymore(in Windows). I wanted to see if it was just the mouse/keyboard itself, but I noticed nothing detects when I connect a USB device. I tried plugging it in every port and it's the same. I thought it was a hardware issue, but now I realize that it is not.
I restarted my computer and tried to get into safe mode; it worked(I was able to go up and down to select which mode I wanted to enter). Once inside safe mode and windows is loaded, the keyboard just freezes. It does not work at all. I then decided to go into bios to see what is up and everything seems right. I even screwed around and messed up my overclock settings.
So now I know my keyboard still works and it's probably a Windows issue. I wanted to see if my mouse would work. I went into Windows Repair(I might have gotten the name wrong) and voila, my mouse worked!
View 6 Replies
View Related
Jan 29, 2012
I left my laptop running for a while when i left the room. When I came back it had frozen, I hadn't been doing anything untoward, I had been running a few programs at once, just like firefox and word. Anyway I had to turn it off with the power button. Then when I tried turning it back on I was able to log in but there was no desktop, just a black screen, same thing when I used safe mode. Now whenever I turn it on it goes to a disc check and when it gets to a certain number it says its unreadable and safe search just plain doesn't work. I'm gonna lose all my files. So is there anyway I could do a restore to factory settings (restoring to another time also didn't work)
View 2 Replies
View Related
Nov 25, 2011
Something really strange happened one day when I ran one of my games. Well, The game crashed several time and when I went to open it in again, my documents wouldn't open! I went to "my computer" clicked it and still nothing happened. Whenever I click "my documents" the document screen just goes off to the side of my screen and nothing happens, same problem when I try to open "my computer". I have run scans with Norton and Malware Bytes but it cannot find any virus, my computer seems clean at the moment.
View 9 Replies
View Related
Feb 9, 2013
computer crashed have windows 7 OEM disk and half the product key . How can i get the product key?
View 3 Replies
View Related
Oct 30, 2011
my media center remote will not change the volume of my computer anymore , also the volume buttons on my keyboard also do not work. i am fairly certain the a registry error or a service or policy error, but i am lost as how to re-enable them. the remote works fine otherwise and so does the keyboard.windows 7 x64 i5-2310 12 gig ram remote model number 1039 keyboard Microsoft wireless 6000 system is fully up to date.
View 1 Replies
View Related
Apr 19, 2012
I can run World of Warcraft and Battlefield 3 at max settings and NOTHING happens. Runs like a dream. However if I play any over games such as Skyrim or the Witcher 2 my computer will completely crash to a black screen and then a weird buzzing noise which lasts 1-2 seconds. It will then require a hard reset.
This crash only happens when I play video games and it seems adjusting the settings doesn't seem to change anything. High or low settings it will still crash. I have ruled out Temperature I think. At it's hottest my GPU will be at about 55C.
My Specs- Operating System:
Windows 2.6.1.7601 (Service Pack 1)
CPU Type:
Intel� Core™ i7 CPU 960 @ 3.20GHz
CPU Speed:
3.2 GHz
System Memory:
7.99 GB
Video Card Model:
NVIDIA GeForce GTX 580
Video Card Memory:
3.97 GB
View 19 Replies
View Related
Jan 12, 2012
My girlfriend's Dell Mini 9 netbook decided to start acting up recently. She turned it on, and it decided to run startup repair. The repair always fails for no apparent reason, and the computer shuts itself down. I tried running a startup repair from a Windows 7 repair disc. The repair from the disc claimed that it fixed issues, and yet when I started the computer up again it ran startup repair again. Its stuck in a cycle I cannot get past. I tried running system restore from the repair disc, but it always fails as soon as its finalized. asically, what the heck is wrong? I unfortunately have little software experience, the majority of what I know is hardware related.
I just ran startup repair from the disc again and read the error details. It says that the root cause is "startup repair has tried several times but still cannot determine the cause of the problem." It still says the errors were fixed. But after yet another boot-up, the repair still automatically runs and fails.etails of the failure:Startup repair cannot repair this computer automatically.[CODE]
View 6 Replies
View Related
Jun 18, 2012
I have an Alienware M14x and just did a clean install of Windows 7...I know how to of course get to the startup and running processes, but not sure what the best way to go about deleting or stopping them is.
View 2 Replies
View Related
