Computer Crashed During Game, Cannot Boot Into Windows Anymore
Jul 9, 2012
I recently bought a new power supply, along with more ram because I was already ordering the power supply. When the package came and I set everything up in the computer, the PC turned on and everything was fine. I started to play a game with my friend and the computer just turned off. No error message, nothing. I believe the computer overheated, but I could be completely wrong. Now, when I start my computer up, it gets to the Launch System Repair (Recommended) or Start Windows Normally. If I select one of them, it will get into the 'Starting Windows' screen with the orbs, and then the monitor will just go blank. The computer still runs in the background, but my monitor just is blank. It is not the RAM (I switched and went to my old RAM) And I also cannot boot into safe mode, or anything of the sort, as the same thing happens. And I cannot boot from a CD (Tried with a windows 7 repair disc and computer goes blank again)
View 9 Replies
ADVERTISEMENT
Nov 6, 2012
I had a bit of bad luck today and my laptop fell on the ground and cracked the case. I checked to make sure everything was functioning and running alright and everything seemed fine, so i proceeded to run solidworks and work on a project and again everything was working fine for about 40 minutes than blue screen popped up and computer tried to restart. When it started backup a screen popped up saying to run startup repair. Ran the repair and when a command window popped up i get a white screen saying error in big red font. So i restarted again and tried to start windows normally it began starting up but switched to start up repair automatically and same thing while start up repair was beggining.to stop happening preferably without re formatting and losing files as i have some really large solidworks files that i need for a project and dont have time to re draw
View 1 Replies
View Related
Nov 25, 2011
Something really strange happened one day when I ran one of my games. Well, The game crashed several time and when I went to open it in again, my documents wouldn't open! I went to "my computer" clicked it and still nothing happened. Whenever I click "my documents" the document screen just goes off to the side of my screen and nothing happens, same problem when I try to open "my computer". I have run scans with Norton and Malware Bytes but it cannot find any virus, my computer seems clean at the moment.
View 9 Replies
View Related
Jan 9, 2012
My computer crashed today and I can't get it to boot up. I can hit ESC during startup and get the menu. I ran all the tests and everything passed. I am trying to create a Windows 7 disk so I can boot it from there since my computer won't start up. I'm not sure where I can download this.
View 7 Replies
View Related
Sep 23, 2012
I Re-installed Windows 7 on my Laptop and It removed basically everything and now I cannot Record with either "Stereo Mix", or "Record Playback" which is basically the same thing I tryed doing the sound properties thing.I use Windows 7 Ultimate x64
View 1 Replies
View Related
Sep 21, 2012
Games:
Wargame European escalation
Battlefield 3
PC crash with BSOD mid-game.
View 7 Replies
View Related
Mar 22, 2012
during the night yesterday my computer crashed, i can't boot it at all. keeps giving me video signal errors, but when I use a linux live dvd, everything works fine, so it is only windows7 that is the problem... I tried using the W7 installation disc but the recovery and restore functions are not working either.
View 6 Replies
View Related
Apr 4, 2011
My laptop used to run on Windows 7 Home Premium 32bit, but the OS crashed and just wouldn't boot. I tried using my laptop's recovery disc, but that had some problem and doesn't help me restore my laptop. I hope to format my hard-drive and do a fresh install of Windows 7. But for that I don't have an installation disc, I have a registered key for Windows 7 at the bottom of my laptop though
View 7 Replies
View Related
Jan 2, 2012
My mate had trouble with wayyyy too low fps in a game.W decided to install Windows 7 ultimate x64 on his laptop then.We couldn't upgrade vista to it, so we chose the "custom install" option, where Windows 7 gets installed separately and vista gets moved into a folder called windows.old.We were almost done with the install and had just passed the time and network setup, suddenly a small window flashes with the text "windows failed to complete...." we couldnt see the rest and the laptop rebooted.Then we got continually stuck on "press any key to boot from CD or DVD...".Sometimes we get it to continue and it gets stuck on "Windows is loading files". And 2 times it completed loading files and shut down instantly after.
View 6 Replies
View Related
Jun 28, 2012
Last night I updated my GPU drivers(NVIDIA) and 5 mins later after I had rebooted from the Driver install, I get a Blue screen.
I tried to reboot but it gets stuck at Windows 7 Loading screen(Windows logo and black background), after about 10 mins of being stuck, I get a Blue screen flash on the screen and it reboots itself, repeating the process over and over again.
I try to boot in safe mode, it gets to the screen where it says "Loading Drivers". Then it goes to "Please Wait" and it stays there for about 10 minutes again until Blue screen flash and reboot on its own.
After that I got frustrated and decided to just stick the Win7 installation DVD into the machine and do a full reinstall. However, after it has gotten past the first screen where it "loads the files from disc"(literally the first screen you get when you try to install Win7), it turns black and won't respond anymore.(Serious "wait what?" happened in my mind at this point).
Next day at work I spoke to some IT guys about it, they suggested it was a hardware failure and then other guy suggested it has something to do with the RAM, whether not working or the RAM slots on my MoBo are broken. Also said that Dual channel might not be working either then. I got instructed to try each piece(I got 2 sticks of 4gb ram) of RAM seperately to see if I can get Windows to boot to see if it's faulty RAM.(I got the same suggestion from the place I ordered my PC parts from)
I am by no means expert, I know the basics of computers, but this is just mind boggling. I might have had faulty hardware all along(Browsers are very laggy and slow) and Windows loads really slowly. The computer is only 6 and half months old.
Specs:
ASUS P8P67 WS Revolution MoBO
i5-2500k @ 3.3GHz
Kingston 2x 4GB 1333MHz Ram
ASUS GTX 580 DirectCU II
Western Digital Black Caviar 1.5TB 7200RPM HDD
Kingston 64GB SSD
Corsair 650W PSU
View 7 Replies
View Related
Feb 17, 2012
I've only had my new computer with Windows 7 for just over a week and it won't work anymore. It goes into Startup Repair and says it can't repair this computer automatically. I press "Finish" and then it just restarts again showing the logo of the motherboard on screen and then goes back into Startup Repair again.
I called the shop where I bought it and they said it is possible I was loading too much software on too quickly. It is a computer I use for business so I wasn't loading any rubbish on and I didn't install that much - Office suite, antivirus, modem software, printer driver.
View 9 Replies
View Related
Nov 26, 2011
I just got my first computer in place i installed win 7 on it and everything went smooth, but then i realized i had by misstake installed the 32bit version..so i checked the SSD, which is the only kind of storage drive i have right now, and for some reason the installation had made an partition called system drive or something on 100mb. the stupid thing is that it was nothing on it?? windows was still on C:? anyway , after many minutes of thinking i decided to just reinstall windows over the old one and so i did. it runned smooth and went perfect, i checked the preferences of my computer and as planned i now had the 64 bit version but 30Gb was lost on my SSD? i discovered that the old windows was still there, in the windows.old folder... i didnt think about much so i'd just pressed delete...
the crash: loud noise came from the computer and it shut off, now i cant get it to work!!!!!when i start it all the lights starts and the fans runs but nohting moreand how do i format the ssd so i can use it when i've fixed the computer!specs:Motherboard: MK Gigabyte Z68X-UD3H Socket 1155, Z68 CPU:Core i5 2500K Graphic: GK EVGA GeForce GTX 570 SC RAM:Corsair 8GB (KIT) DDR3 1600MHz/VENG. Drive:SSD 120GB Corsair SATA 2.5", Force 3 Series Cooler:Cooler Master Hyper 212 Plus CPU cooler AMD/Intel PSU: XFX XPS-750W BE ATX 12V EPS 12V
View 7 Replies
View Related
Dec 18, 2011
I am no expert when it comes to computers so please bear with me. My Acer Aspire laptop crashed on me. It uses Windows 7. Start up repair does not work. I have a set of Windows 7 disks, 32 bit and 64 bit. Not too sure which one I should have used so I tried both with the same results. I have tried to re-install Windows 7 again as well as repairing the Windows 7 which is already on my computer with the disks with no luck. When re-installing it gets stuck at 'Setup is starting'. It stays like that for hours. When I try the repair option it gets stuck at 'checking for operating system' or something to that effect, also for hours on end
View 9 Replies
View Related
Sep 12, 2012
I am writing this windows safe mode.Cannot get computer to boot in reg mode. Sat for 40 minutes, with message "please wait while windows configures"Am running windows 7, 64 bit home, Dell Inspiron 570 It started yesterday when it downloaded updates for Windows. After the restart, the computer screen looked strange and could not open any programs. Went to "start" and re-booted, same thing happened again. I again went to start, this time it came up with 2 errors. (wish I had wrote them down) but said something about windows cannot find such and such. (sorry) Anyway, clicked on the "X" and windows came up again, but nothing would open. Had to hard boot as the start button would not even work.Rebooted into safe mode and have tried to return to a previous restore point. Seems I don't have any. So can't do that. I did go go to the recent installed windows updates and deleted them. But will not let me change the settings as in: Don't install updates automatically. I don't know if it is trying to install those over and over again. I tried to get it to come up again with the errors, but no such luck, it just sits with the blue welcome screen, then the "please wait"
View 9 Replies
View Related
Feb 25, 2011
When I installed Windows Live Essentials 2011 on my new Compaq Presario CQ5621F with Windows 7, it seemed to load fine. I tried to access the internet and got no connection. When I rebooted my computer it suggested that I restore to an earlier time. Upon doing so it works fine again.
View 3 Replies
View Related
Feb 9, 2013
computer crashed have windows 7 OEM disk and half the product key . How can i get the product key?
View 3 Replies
View Related
Aug 18, 2011
Ok so my computer was running sluggish before it eventually totally froze up. I reset the laptop (dell inspiron duo) and now everytime after going through dell screen/bios it tells me that "windows failed to start. A recent hardware or software change may be the cause" or something like that and gives me the option to load either run windows normally or launch startup repair.No matter which option I choose I get windows is loading files and a White loading bar at the bottom of the page. Once this is complete the Microsoft green loading bar, no logo, will run through once before taking me to a blue screen which appears to be some kind of back ground. There's a dove carrying a branch and some White lines/lighting effects. This isn't my home screen and all that I can do is move the cursor around.
Nothing else happens and there is none of the usual start up behaviour.As far as I am aware there is no malware and the only new software that has been installed was the drivers to use an xbox controller with the pc via plug and play which was around 12 hours ago and the machine has since been turned on and off without problem up until now.
View 3 Replies
View Related
Oct 13, 2009
Okay so I installed Windows 7 after taking a break from the Beta. Unfortunately it didn't do what it usually does and let me boot "an older version" or anything like that. It just booted Windows 7. I read some stuff on this forum and ended up using bcdedit to try and fix it. These are the exact commands I entered:
bcdedit /create {ntldr} /d "Windows XP"
bcdedit /set {ntldr} device partition=C:
bcdedit /set {ntldr} path
tldr
bcdedit /displayorder {ntldr} /addlast
Note: C: Is where XP is. O: is where Windows 7 is.
After doing that I got a dual boot screen at start-up. When I select Windows 7 I start windows 7. When I select Windows XP it just restarts the computer and shows me the screen again.
Any suggestions? I don't know how to get back into XP now. I guess I could disable the SATA than Windows 7 is on and it would be forced to start up XP (which is on an IDE) but I really want to get this dual boot business fixed.
I would just say screw it and abandon XP for now except I password protected my files and now I can't get to them unless I transfer ownership one by one. :S
EDIT: I fixed my problem, and in an unexpected way. After I posted I was frantically trying to decide what was different this time (as I had gotten this setup to work before). I then remembered that I had set my SATA drive as the primary boot drive in the bios in my effort to get Windows 7 to work when the boot sector was corrupt. I changed it back to my IDE drive (the way it originally was) and the dual booting worked again.
I never would have thought that would be the problem. It doesn't explain other users who had the exact same problem though. I doubt very many people decided to play with the controllers in the bios.
View 2 Replies
View Related
Sep 14, 2012
So I had some problems with AVG antivirus, when booting my pc got stuck on booting the avg processes, so I removed them, then it got stuck on some other processes (like fvevol.sys or so) so I removed them too. After removing all processes that got stuck when booting, I couldn't boot at all! Every time I booted it automatically came in the boot manager, saying it could't restore my pc.
View 6 Replies
View Related
Dec 27, 2011
I have a serious problem with a recovery which did not solve the problem. I now have no internet the screen is wrong the icons and programs have disappeared and I just cannot use the computer anymore. can someone let me know if I can recover the system by running the program in safe mode or how can I recover the system to to yesterday's setting.
View 9 Replies
View Related
Nov 24, 2012
I have now burned through 2 laptops last week.. both were Toshiba Satellites Model:C655-S5132. I was running iTunes, Google Chrome, �Torrent, and Google Music Manager on both when they died. What happened was they both froze up when I was listening to music in iTunes and I held the power button down to shut them off.. now they won't boot. I am only really concerned in getting one of them to work for right now due to the fact that I don't have a computer other than these two.
The computer I am trying to fix will boot up past the Toshiba Screen and then will go to a black screen with a white flashing underscore in the top left corner and will not boot any further. I am able to use a windows 7 install disk to try and fresh install it, but I get an error message when it tries to move files. I was somehow able to access the explorer and view all my files through the install disk so my hard drive isn't crashed at least. I cannot boot in safe mode, I cannot boot to last good configuration, no system restore files work, I don't have a saved system image, and I cannot get into Toshiba recovery console.
View 3 Replies
View Related
Jan 4, 2013
I used to create USB boots using the Program Ultra ISO and boot and install windows with my USB flash. But this time it isn't possible. When I choose to boot from USB, a black page comes, giving the message : Start booting from usb device ... but it remains on this page and nothing further happens. I tried the same flash on another system and it booted completely. It shows that the USB is written correctly and it must be something wrong with my system.
View 9 Replies
View Related
Jan 9, 2013
the boot manager always pop up, and i cant use my keyboard anymore. but when i press the f8 right after i start my laptop and simultenously press enter it works but when i need to use the keyboard it is not working again even the enter key.
View 3 Replies
View Related
Feb 16, 2012
playing around with my new computer, i was trying to record a sound playing on Internet with the microphone using the sound recorder. after about 10 seconds, the whole system froze - i couldn't even move the mouse cursor and had to unplug the computer and re-boot. what's the problem and is there an easy fix? below is a screen shot of my system specs, if that's any help.
View 1 Replies
View Related
Feb 17, 2012
as the title says, I was just talking with some friends on skype and then the computer froze like when it's going to give you a BSOD but instead of that it just froze, so I turned it off and now the computer won't even show BIOS menu. RAMs are fine, they were tested by the retailers for 48 hours with memtest and tested by me for 24 hours (when the computer used to work).So to give you a clearly idea of what's happening, I press the power on button, there's a beep and the computer starts, right? my pc powers up but it never beeps, the CD/DVD reader works, the processor starts up, but it's just stuck there. I checked on the motherboard's user guide and it doesn't say anything about "not beeping"
View 9 Replies
View Related
Nov 18, 2012
I have a decent PC (i7 2600, 16gb ram, SSD + 2HDDs, etc). I've been using it for about a year.Since it's a work machine, in the last few weeks, I've been using VMware on it to use other experimental software, with no problems.Today, I tried to create a new VM and the software asked me to update it to a new version. I did it, create new VM and rebooted to change a config in the Bios (about virtualization). But when I tried to boot again, surprise: BSOD.
STOP: 0x0000007b, (0xFFFFF880009a9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)
When I got back to the BIOS, I found the boot order to be different. I fixed it but no good. I disconnected the other HDDs and all I got was a different boot error message. I plugged the SSD in another machine and it worked fine?
View 13 Replies
View Related
Feb 26, 2012
Computer threw out a bunch of weird language and then said crash and shut down. Now it doesn't really boot or reboot. I have to pull the battery to get it to restart and I get the HP logo when I put the battery back in and it takes me to a Windows Errory Recovery screen with two options: Launch Repair or Launch normally. Neither one of them does anything. I just get the blue screen.
I've tried the f8 key and the f10 key and can't seem to get to any other screen. I put the restore disk into the CD rom drive and I don't think it's accessing it at all.
It is an HP Pavilion dv7-4087cl with an Intel Core i5-430M processor and its running Windows 7 Home Premium OA 64 bit.
View 1 Replies
View Related
Jul 31, 2012
i was on [URL] and found win8 login for 7 i replace authui.dll in system32 and sysWOW64 also replased basebrd.dll
then tried it out by switching user i got black screen then rebooted and i still got a black screen
then i booted into startup repair and then it gave me an error now i have startup repair infinite loop
View 6 Replies
View Related
Jun 16, 2011
My computer crashed and I lost all my Sims data. I tried to reinstall with the original discs but when I got to the 20 digit code on the box, it said it was invalid (probably because it belonged to me). I had installed Sims 3, Expansion packs World Adventures, and Ambitions. I recently bought Late Night, but my computer crashed before I downloaded it. How can I reinstall these? Will any of the work I did on each one be restored, or will I need to start in the beginning of each one?
View 1 Replies
View Related
Apr 24, 2011
I've had problems with my wireless printer going "offline" a lot and its one of the most frustrating situations when you go to hit print and theres a 35% chance it will be offline.
Now I tried to "Add a new printer" and for some reason after trying time after time my computer is not discovering my wireless printer any more?
My printer sucessfully pairs up with my router every time I try to go through the wireless setup wizard. I've restarted/unplugged the printer time & time again & also restarted the computer.
how to get my computer to see this printer again & KEEP it online?
View 5 Replies
View Related
Feb 9, 2012
My computer just crashed due to the reason "IRQL less than or equal" or something along those lines, because it was only up for a second before my computer crashed. Minidump file is included in case anyone can help me. I think it might have to do with my ram, because ever since i bought it (around 2 months ago) i have crashed 4 times.
View 1 Replies
View Related
