Dual Boot Installation With Windows 7 And Vista
May 5, 2009How to Do a Dual Boot Installation with Windows 7 and Vista ?
View 0 Replies
ADVERTISEMENT
Windows 7 & Vista Dual Boot Installation - Vista Won't Load?
Sep 13, 2010New laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies View RelatedSystem Should Dual Boot To Windows 7 Or Vista Ultimate, But Does Not Recognize Vista
Aug 15, 2012My system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
View 1 Replies View RelatedRemove Vista From Vista / Windows 7 Dual Boot?
Sep 13, 2012I have two drives (C and D) with Vista on one and Win 7 on the other (not sure if they're actual drives or partitions of a single drive, how do I tell?). I am dual booting and never use Vista. Starting to need the disk space and want to delete Vista. Is this difficult in this scenario?
View 2 Replies View RelatedRemoving Vista From Dual Boot Of Windows 7 And Vista?
Apr 5, 2011I had recently installed windows 7 on my laptop running windows vista. I did not remove the existing windows vista installation, and thus win 7 was installed in a dual boot combination. Now, i want to remove vista from my laptop and use windows 7 only.The problem is that during installation, win 7 was installed on logical drive and windows vista was on the primary drive. Thus, i cannot delete/format the windows vista partition. Also I cannot transfer the boot drive to the partition containing win 7 because the vista partition is the active one.
View 6 Replies View RelatedDual Boot Windows 7 And Vista Boot Error Winload.exe
Oct 14, 2009I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedDual Boot - Keep Vista With Win 7 Without Reinstalling Vista
Oct 11, 2009I have dualboot XP SP3 and Vista Ultimate on my system,,and now i want to install Windows 7 over the XP OS. I wish to keep Vista with Windows 7 without reinstalling Vista.
Can I just install Windows 7 over XP , or should i be careful for MBR,or boot....
Dual Boot Windows 7 With Vista?
Feb 17, 2011I was wondering if it's possible to run windows 7 along with Vista (64bit). My current computer has 4 drives setup in a RAID configuration and i am wanting to add a new drive which I could run Windows 7 on.
View 1 Replies View RelatedDual Boot Windows 7 With Vista
Mar 6, 2012I got an issue were i have to install windows 7.Currently i have an Dell inspiron 1721 laptop with windows vista.Problem is there is a lot of data on my machine and i dont want to format and fresh install i would like to dual boot is there a way to do this?How would you guys suggest i do this without messing up my windows vista.What programs do i need what steps do i need to take.
View 1 Replies View RelatedVista Windows 7 RC1 Dual Boot
May 7, 2009I have just joined this forum today because I have a couple of questions about installing Windows 7. My Gateway desktop has a 250gb harddrive which has Windows Vista SP1 installed on a 70gb C;/(active/boot) partition and a 10gbD/recovery partition and the rest of the drive is Unallocated- and this is where I intend to install Windows 7. However I don't want it to use all of the unallocated space, so during setup will I be able to limit how much space Windows 7 can use?
View 9 Replies View RelatedRemoving Vista From Windows 7 Dual Boot?
Jan 13, 2012I have attached the screen shot from Disk Manager which shows how I installed Windows 7 on a machine that originally ran Vista.After I used Windows 7 I have not used Vista for over a year so I moved the Windows 7 to the start of the HDD using Partition wizard and some instructions on the web.I now want to delete all the vista files and stop the dual boot getting the PC to go straight in to Windows 7.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 3327 Mb
Graphics Card: ATI Radeon HD 4800 Series, 512 Mb
Hard Drives: C: Total - 509906 MB, Free - 305018 MB; D: Total - 205479 MB, Free - 183636 MB; E: Total - 715401 MB, Free - 300404 MB;
Motherboard: ASUSTeK Computer INC., P5Q-PRO
Antivirus: Norton Internet Security, Updated and Enabled
Running Dual Boot With Vista And Windows 7?
Feb 10, 2013I recently installed Win 7 on a second Hard drive. Is it possible to run the programs I had installed on the Vista Hard drive? Both are HD's are still installed.
View 2 Replies View RelatedDual Boot Windows 7 & Vista On SSD And 2x HDD's In RAID0
Dec 30, 2010I have been running Windows Vista 64 for about 3 years off of 2 HDD's in RAID0 and I just got a 60GB SSD which I wanted to install Windows 7 on it and still be able to dual boot my Vista 64 from my RAIDED drives. And then shrink the partition on my RAIDED drives to roughly 50% and create a new partition on them for my Windows 7 install to also be able to use to install programs and files. Which I was told elsewhere is totally possible. Windows 7 Install
When installing Windows 7 on my SSD I couldn't get it to install with the SATA MODE in the BIOS set to RAID, it would say "cannot install to this disc, check if its enabled in BIOS". So I had to set it to AHCI MODE, which worked, so I unplugged every drive in my system and installed Windows 7 on the SSD like this.
So the problem is when I plug my RAIDED drives back in they will only boot when the MODE in the BIOS is set to RAID but then the Windows 7 on the SSD doesn't boot as that only boots when the MODE is set to AHCI. In my BIOS the SSD is only visible in AHCI MODE, my RAID drives are visible in both MODES but as Intel_Array in RAID MODE and as 2 seperate drives in AHCI mode.
So I am in a bit of a pickle and not sure what to do... I don't mind have to change the SATA MODE settings in the BIOS to dual boot back and forth, but will I be able to shrink and re-partition the RAID drive so Windows 7 can use them? With the MODE set to AHCI I can boot to Windows 7 from the SSD, and after installing the Intel Rapid Maxtrix Storage Controller I can access most files on the RAID array so it does detect the RAID array even when its set to AHCI but will not boot the RAID array in this MODE.
I fear the problem may be with my BIOS, Motherboard or the Storage Drivers as the RAID mode should be able to support a RAID array aswell as a stand alone drives using AHCI. But for me it seems when I enable RAID MODE, AHCI fails to work on the SSD. This could be because I installed it on the AHCI MODE but thats all I could do.
My system:
Abit IP-35 motherboard
Intel Core 2 Duo E2160
4GB DDR2
2x 250GB Western Digital in RAID0 booting with VISTA 64 (for about 3 years).
1x 60GB NEW Corsair SSD with Windows 7 (64) on it.
1x 640GB Western Digital Storage drive (currently unplugged).
Windows 7 / Vista No Dual Boot Up Choice
Apr 23, 2011I have Windows 7installed on one drive and Windows Vista on another drive. When I boot up the computer it goes directly to Windows 7. It recognizes the second hard drive in Windows Explorer but it doesn't give me a choice as to which operating system to run from.
View 4 Replies View RelatedHow To Dual Boot Windows 7 64-bit With Existing Vista 32-bit
Jul 1, 2011I have an HP quad core machine with OEM Vista Home Premium 32-bit installed. It has never been connected to the internet (only my home network) since I have only used it for video editing and a few other particular tasks that do not require internet access. My thinking was that by keeping it "virgin" I would maintain fast boot times and that out-of-the-box snappiness. Set it up with several specific types of software, remove everything that isn't important (like AV software), and only install things via USB when necessary. For three years I've succeeded and the box is as fast as the day I set it up. It sits sequestered in its tower still wearing its chastity belt, oblivious to the evils of the outside world.
Unfortunately my main online machine (Vista 64-bit) just suffered the indignity of a failed motherboard. It's not worth repairing. Luckily the hard drive is intact. Here is my plan of action. I'd like to know if it makes sense, if it's doable, and, if so, the best way to go about it.
I'd like to set up a dual boot system. A year ago I purchased a full Windows 7 installation using the student discount available at the time. My virgin machine is capable of handling Windows 7 64-bit, so I'd like to install that (have already downloaded the ISO and burned it to a dvd). What I want to do is throw in an entirely new hard drive and install Windows 7 64-bit on it. I would then leave the Vista 32-bit existing installation intact and untouched. I would end up with three SATA drives in the HP tower -- 1) main drive with the existing, virgin OEM Vista 32 installation, 2) brand-new drive on which I would install Windows 7 64-bit, 3) drive I pulled from my dead Vista 64-bit machine, including lots of data and settings.
I would gradually set up the Windows 7 to mirror what I was doing on the machine that just died (I still have access to all of the important settings I need on the hard drive). When I want to do my regular stuff on the net I'll use the new Windows 7 64-bit installation. When I want to do the video and photo stuff I've been doing the last three years I'll boot to the virgin Vista installation (maybe even unplugging from the net while doing so).
So, can I do this? Will I maintain the snappiness of my current setup by making sure that when I boot to the existing Vista 32 install that I stay offline? If all answers are yes, how do I do it? For example, do I just install a new hard drive and then tell the machine to boot to the dvd drive and then install Windows 7 to that new drive from there? If so, how does the dual boot part of it go (or is it automatic and I'll be asked each time I turn on the machine?)
Can Dual-boot Vista & Windows 7 / Will It Activate
Jan 11, 2012how will i turn on the wireless connection of my dell
View 7 Replies View RelatedDual Boot - HDD#1 Vista Ultimate & HDD#2 Windows 7 Pro?
Feb 7, 2010Currently using 400GB HDD #1 working with Vista Ultimate 64Bit OS.Recently bought 500GB SATA HDD #2 installed Win 7 Pro I realize I can just set in bios to use one or the other drive, but that doesn't sound like a best way. In order to use both drives it may be best to dual boot.
View 9 Replies View RelatedDual Boot Vista 64, Windows 7 32 Problem
Apr 7, 2009I have been running windows vista home premium 64bit for some time now and had previously had it set up to dual boot with XP. I just got a windows 7 disc and thought I'd give it a try.
I reformatted the XP partition (as I was having problems and needed to reinstall anyway) and installed 7 on that partition. 7 is a great OS, very few things I don't like about it.
However, now that I was going to return to Vista to get some work done I find that I am no longer getting the option to boot to it. The boot manager does not appear when I start up my computer (tried hitting ESC at BIOS too and it doesn't give me the option for vista, only 7).
I downloaded EasyBCD and that doesnt' give me the option for Vista either, only 7.
can anyone tell me how to get back to vista? (do I have to reinstall that, will it kill 7 then).
Removing Vista In Dual Boot Leaving Windows 7
Nov 5, 2009When booted to 7 Disk Management shows the partition of 7 as C: (Boot,Page File Crash Dump, Logical Drive) and the Vista partition as D: (System, Active Primary Partition). Now I would like to remove the Vista partition and merge that to the 7 partition. I have searched around and have read many options of doing this but I can not find a definitive way of completing this.
View 7 Replies View RelatedRemoving Vista And Its Recovery From Dual Boot With Windows 7
Sep 8, 2010I have a Dell Inspiron 15 System. It came with Windows Vista Home Basic when I purchased it 2 years back.I installed Windows 7 as a dual boot with windows vista on it(with tut from here ) and it ran very smoothly. I am happy with my dual boot system. But off late, I am facing problem of low hard disk space(as seen in SS). This is because most of programs like MS office, few games, Acrobat, Winamp etc are installed twice, one in C: (Vista) and once in D: (Win 7)Now I am very happy with 7 and want to remove Vista. Pls link me to a tutorial that can help me to remove it. I want to remove C: and E: (Vista's Recovery which came by default with system) I want to retain my existing programs, settings in win 7 as it is. Untouched. I want to merge those C and E into one.
View 6 Replies View RelatedInstalling Windows 7 Over Vista On Dual Boot With Ubuntu
Jan 14, 2012I want to upgrade Vista to Windows 7, but without disturbing my Ubuntu installation, which is dual boot with Vista. I would prefer to do a clean install of Windows 7 over Vista, which has had niggling little issues (I resolve them and new ones appear) ever since I bought the pc. I don't have the recovery discs for Vista (the ones you make when you buy a new system) as they went missing during a major move.
What is the best way to accomplish all the above? Also, from what I understand, a clean installation can be done with an upgrade version of Windows 7 as long as a previous version of Vista or XP is already on the machine?
No Audio On Windows 7 Side - Dual Boot With Vista OS
Nov 25, 2011I have just installed windows 7 32bit on one of my desktop machines. I am basically updating the system from windows vista which at this time is loaded in my other hard drive. It is basically a dual boot at this stage. The problem is I have no sound on my windows 7 OS but I do have sound on my vista OS on the other drive. The windows 7 installation is running perfectly otherwise but just no sound.
Device manager says all drivers are good. I've downloaded a windows 7 compatible audio driver from the Gigabyte web site and installed that but to no avail. My speakers aren't muted either. I have clicked around most sound related menus on the system but cant work it out. I dont know all system specs but it has 4 Gig of ram and it has a gigabyte EP45-UD3L mainboard, Nvidia GT440 Graphics.
Dual Boot Installation With Windows 7 And XP
Apr 28, 2009How to Do a Dual Boot Installation with Windows 7 and XP ?
View 0 Replies View RelatedNeed Drivers Dual Boot Installation -Windows 7 & XP
Aug 26, 2011In process of creating a slipstreamed XP Install disk, but need to get the SATA drivers for this machine, as obviously there in no floppy to use. The factory disk has 2.5 GB of drivers, which obviously is more than I need, plus they will not fit on the CD.
View 3 Replies View RelatedWindows 7 Dual Boot / Move One Installation / BCD?
Dec 6, 2009at the moment I got two Windows 7 installations on a single hard drive. A Windows 7 Ultimate x64 for my office applications and a seperated Windows 7 Home Premium x64 for all of my games.Windows 7 Ultimate is on the first partition (C:) and Home Premium is on the 2nd partition - it was installed from within Ultimate so it has the drive letter D:.I now want to move the second installation to a new harddrive. This would have been an easy task with the goold old boot.ini - just editing the disk and partition number (example: (0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP") to suite the new situation after moving the content of partition 2 to the second harddrive.Is there a similar command for the bcdedit to just change to target of the bootloader for Home Premium from disk(0) partition(2) to disk(1) partition(1)?
View 7 Replies View RelatedInstallation And Dual Boot With A Preinstalled Windows XP?
Oct 4, 2011I have 2 brand new Asus K52JT laptops with the following specs:- i3 380M- 4Gb DDR3
- HDD SATA II 750Gb- ATI Radeon 6370M 1GbThey both came with Free Dos installed.On one of them I have successfully installed Windows XP , tweaking the bios to use the ATA instead of the AHCI controller. Generally the drivers work fine except for the card reader witch doesnt want to install. Being pleased with the results I have decided to leave the first laptop like this and experiment a little with the other one.What I want to do is use nLite software to inject the SATA drivers into an Windows XP installation iso to enable the AHCI controller and install.Then, if everything works fine I would like to install Windows 7 x64 on another secondary partition as the second OS.The problem is that I am not sure witch SATA drivers i need and from where to procure them.My question would be if anyone has tried something like this before and if there are any general rules or knowledge that i should be aware of.
Dual Boot From Windows 7 To XP Installation Problem
Dec 31, 2009i have Windows 7 installed which i installed it my self 24hours later i decided to install another OS a dual boot with XP (i dont know what im doing) so ive install it normally as i installed Windows 7 with DVD on but different partation location after successfully installed my computer restart the Asus logo pop up after that some long msg "OS Error" at the top left of my screen or something that i keep restarting and trying to find the SafeMode but i dont know how?(it new Motherboard) to go with SafeMode?
i know pressing an F8 but instead it takes me to select a Boot menu with DVD-Driver/Hard Disk Driver so i got stuck , so i reinstalled an OS but this time i reformatted the partation where Windows 7 installed so i can installed the XP from there now the installation is finished it restarted again but this time its not error OS msg its just it gives me the blinking " - " DOT from top-left of my my screen..theres nothing i can do on what i know for now but right now im installing back again to Windows 7 hopefully it fixed but still i need your help Windows 7 is very new and good awesome OS not every applications and games can compatible with it thats why i still like XP or possible going Dual Boot of Windows7+XP.
New Video Card Drivers Work In Vista But Not Windows 7 Dual Boot?
Dec 13, 2012I just purchased a new video card for my old Acer M3100 that I dual boot the original Vista and Windows 7 on. I bought a new Asus Nvidia GeForce GT 610 video card to play Skyrim. Windows 7 will install the drivers with absolutely no error messages but upon rebooting they won't load and I'm stuck with basic VGA. I booted out and back to Vista and loaded them and they installed fine as well and upon rebooting into Vista they actually load! My Windows 7 install is a recent clean install because I tried upgrading to Windows 8 and didn't do a clean install and it borked itself on all my legacy hardware. Does anyone know why a clean install won't load new video card drivers but my old Vista install loads them fine? (Yet another reason not to abandon the Vista Beast, Vista is the last OS that recognizes my (2) Rio Karma MP3 Players.)I downloaded the latest drivers for Windows 7 Pro 64Bit directly from Nvidias website and installed them and still get a "No GPU detected" message when trying to run the NVidia software that comes with the drivers.
NVidia Driver Version: 306.97
Delete Vista / Dual Boot Leaving Windows 7 - Separate HDDs
Mar 12, 2012I would like to remove Vista from my dual boot setup. Here is how I got to where I am now.
I had Vista installed on my PC hard drive (was C. Later, I decided to install Windows 7 HP on a new and seperate HDD. I unplugged the Vista HDD and added the new HDD and installed Windows 7 as if from scratch (I was worried that the install would mess up all my files on Vista). After the Windows 7 was up and running, I then reconnected Vista redesignated it as drive E: and after some searching on how to, I created the dual boot using my Windows 7 disk so I'm assuming the boot file in on drive C: along with Windows 7.
I now want delete the dual boot and Vista so I can use the drive as a backup drive or possibly Win8. I have found several methods to do this but none that really have my specific situation.
Dual Boot - Get Rid Of Vista
Jan 25, 2009I seem to be having a right trauma with this lol. I originally had Vista installed. Then i installed 7 to another HDD and that worked fine. I could choose between the OS. Now, i want to get rid of vista and use 7 solely. Easy i thought. Remove the boot entry and format the partition. Thats where it went horrilby wrong
Upon reboot i got the dreaded BOOTMGR missing file do'h
Anyway long story short i manged to system restore and fixmbr to boot back into 7 (phew)
Now can anyone tell me of a way that i can ditch vista without the headache of this.
ive attached a screen shot of how things are layed out.
Plus can anyone recommend a good imaging program that i could use just in-case my tinkering leads to something i cant repair.
Vista + Win 7 - Where Is Dual Boot ?
Nov 13, 2009I've something going on in my PC with 3 partitions. I have one called C:/ where I have Windows Vista 32-bit (x86) installed, other called S:/ which is empty and the last one is N:/ where I have all my files like images, music, videos, etc... (wisely done so when I need to re-install OS, don't waste time burning all that files on dvd).
Since I got one partition empty (S:/), I decided to give Windows 7 a try. Being a TechNet Plus subscriber, allowed me to get a free copy of Windows 7, which I downloaded and it was saved on C:/ partition.
I know that's stupid and I've been slapping myself because of that but, I went to the downloaded files and hit twice on setup.exe. This means I didn't burned the .iso to a DVD
Seven was sucessfully installed. After playing around with new features and graphics, I installed some Windows Updates and rebooted for the first time (since I installed it).
DAMN, here starts the problem because when booting up, appeared the message on black screen saying "BOOTMGR IS COMPRESSED. HIT CTRL+ALT+DEL TO REBOOT". I totally forgot that my S:/ partition was compressed! And we all know that an OS partition should never be compressed. And then I slapped myself again.
The weird thing is that I couldn't boot in Windows Vista, I hadn't that option. Since I didn't burned Windows 7 to a DVD (*slapping me again*) and I couldn't start in Vista, I had to insert a modified Vista DVD by Toshiba (that came with PC when I bought it), this means that I don't have the repair option, I'm only able to format and re-install OS (and that sucks!), ..., and now it is fixed, that "bootmgr is compressed" message is gone which allowed me to boot to WinVista but where's dual boot??!
First thing I done when I got Vista back was uncompressing S:/ partition. Then I went to msconfig, but there is only one OS in Boot tab - Windows Vista. Once C:/ partition was formatted, and Windows 7 Setup was saved there, I lost those files, I need to download them again. But it is already installed, so there has to be a way to fix this. The problem is that I can't load Windows 7, I don't have that option while booting...
Anyone knows how to fix this?