Computer Fails To Boot Into Windows After Sp1 Installation
Mar 10, 2011
i've had some issues installing sp1 (7 ultimate, latest windows updates) via windows update when the installation fails on a few different error codes, but i have gotten it to install a few times. each time the installation finishes, i restart the computer when prompted and it goes through the update process when shutting down, then after the windows 7 splash screen ("starting windows") passes, the screen goes blank (black screen, no video- monitor displays "going to sleep" message) and the HDD light on the computer is lit solid. i've left the computer sitting for hours with no change- i eventually get Windows to boot again by using the install disc to do a Windows restore, but i haven't been able to get past this yet.
This issue has just start a couple of days ago were the computer would restart at the point of the boot logo just before the orbs came in, i have tried booting in all safe modes and the computer would restart, tried repair and it restarts before finished loading. I have tried using the os install disk but it also restarts. There is no BSOD. Is there a way to fix this or would i have to replace my motherboard?
Ok so after years of running XP, I finally got an external HDD to back all my crap on and Windows 7 Ultimate. I backed up all my stuff, ran the win7 DVD through start up, reformated my hard drive, installed windows 7.
It installed fine, rebooted a couple of times through the install, finishes, and logs me to the desktop. Its all working fine, I can use the net etc. I shut it down to restart it, and it doesn't start back up. It gets to the bios window where it decides to start off the dvd or hdd, just prior to where it should normally change to the 'windows is loading' screen, and just sits there, blinking and doing nothing.
I've done three installs, I took out the hard drive, reformated it with another computer, made sure it had a ntfs file system, everything, it's working fine. But every single time I install windows 7, It logs me into the desktop for the first time, I can do everything fine, but then if I Shutdown or restart, it hangs on the screen prior to windows loading. I can't even choose a boot option.
I've seen some ideas on other forums, pulling the power out, resetting the bios/cmos, changing boot sequence, unplugging all non-essential hardware.. nothing. It's like as soon as I install windows 7 my hard drive isn't there anymore.
Specs: Abit AX78 - Latest BIOS version AMD 9950 quad core 2.6 4GB DDR2-800 ATi HD 5870 Western Digital 500GB
I'm back with another issue. I'm setting up a PC for recording TV and it needs Windows 7 or Vista as the OS (since they come pre-installed with Media Center). This is the PC.The specs are also included: Shuttle XPC Barebone.It contains 2GB DDR2 ram and a 500GB Seagate HDD.During the windows installation (either Windows 7 or Vista) three things can, happen,-When the disc boots up, the GUI of the installation freezes and hangs. indefinitely.-When windows begins to install and expand the files, the PC will reboot randomly.-During install, the screen will go black with only a few red pixels present.*This happens with both 32/64bit installations.I tried putting in a different video card to see if that was the issue, but no dice. Also, I know this system can run windows vista/7 because my father is using the same exact PC model (SN68SG2) and is running Vista ultimate 32bit just fine.I have already diagnosed the RAM and HDD and they are in working order.For some reason, the only OS that installs without issues is XP. Worse case scenario, I can get XP media center edition, but I'd have to obtain a disc or iso to even test it out.
i try for 3 days to install Windows7 on my OSZ Vertex SSD. As installationsource i use a usb disk.The Setup starts fastly withput andy problems, but hang at expanding files(70%-90%). I tested the setup with my old sata hdd and the installation passes without any problems.
my Windows 7 Ultimate Installation is hanging an "Expanding Files".. But wait, I don't think its a Windows issue. I have read and read some more on how to fix this and have tried (1) to change the SATA ports on the drives, both HD and DVD-ROM (2) to change hard-drives (both new) (3) to switch out 3 different DVD drives to ensure the drive wasn't failing (4) to check the BIOS settings (5) to remove the bios battery and hold down the power button the erase the CMOS Memory (6) to use different OS Discs (7) to use completely different operating systems- Windows 7, Windows XP, Linux, ReactOS (8) to remove memory and swap with memory that I know is good.The ultimate object is to successfully install Windows 7 on this machine; but with all of the above being done and it still hanging on "Expanding Windows Files" and getting stuck to the point that I cannot move my mouse, I am unsure of what to do at this point.
Like 3 weeks ago the smarthdd malware affected my computer. The one where all your icons, files, etc. are hidden, gives you bogus security alerts, and then turns off the PC. Using support from the web with Rkill, MalwareBytes, and Hitman Pro. I eliminated the problem. While I thought I had recovered the computer I was wrong. Probably a day later I notice regedit would start when the computer was started and a few seconds later the computer would turn off. After turning on the computer a few times, the problem was gone. MSE is turned off. I tried to turn it on but it wouldn't turn on, saying the system needed to restart.
I also notices the computer would notify that Windows Update was also turned off and can't turn it on or download any updates (error: windows update cannot currently check for update, because the service is not running. You may need to restart the computer). Also, when I click the Nvidia settings icon, the computer does not detect video graphics hardware. I checked around a forum and I saw someone having the same problem and was advised to set BITS service and Windows Update service to start automatic. But when I check the services.msc, those services are gone. Also, I noticed that in the Device Manager, in System Devices, 2nd Generation Intel Core processor family PCI Express controller - 0101 has a yellow triangle sign on it.
On properties, it has this status: "Windows cannot initialize the device driver for this hardware. (Code 37)". So I try uninstalling MSE and installing it again, but the problem persist there. I run several scans with different anti-virus/malare and while I do find a few malwares, fixing/deleting/quarantined them haven't solved the problem. Yet, one antivirus (eset nod) wouldn't install, after many tries when it got to a driver install stage. I also try windows fix it, but nothing was solved. Also tried kapersky TDSSkiller, and nothing was solved (though when initializing, it gives an error saying that 'Can't load driver", yet it continues initializing).
So then I tried chkdsk /r in the command prompt, but it throws off an error in the second stage, restarting the scan again continuously until I decide to skip the scan. Finally I decided I had enough and tried a repair install, but after the stage where it check the programs and settings, I get the error "windows could not prepare the computer to boot into the next phase of installation". Then out of resignation I tried doing a clean install, but it gives me the same error. Later ran sfc /scannow on command prompt, and the log said that it couldn't repair DDORes.dll. So then what I did was replace DDORes.dll with one from installation disk.
Nothing was solved, and sfc scan still gives me that DDORes.dll is corrupted and can't be repaired. Later I tried upgrading the Intel graphics driver and the Intel Display Audio Driver. After rebooting the resolution of the laptop changed from 1366 X 768 to 800 X 600 as default, and now i can't increase it over 1024 X 768. Device manager shows that now both the Intel HD Graphics 3000 and Intel Display Audio cannot start due to error: "Windows cannot initialize the device driver for this hardware. (Code 37)" Or any way to at least clean install the OS so I can get rid of this problems?
Got Windows 7 Clean Installation over the computer's USB 3.0 port done without too many problems but with some hassle anyhow.For the clean installation I followed the procedure of GreGrocker Clean Reinstall - Factory OEM Windows 7 and put the whole installation onto a 4GB USB Flash Drive.From the computer's USB 2.0 ports there was no problem whatsoever and Windows 7 got installed very quickly.However, over the computer's USB 3.0 port things weren't easy. I finally got it done by uploading the proper USB 3.0 Root Hub and Controller drivers *.ini and *.sys files.Strangely enough, at first everything went well over the USB3 port and the WinPE environment with its RAM drive (X:) got deployed correctly. The only sensible explanation for that is that the computer's BIOS used the appropriate and build-in USB3 driver to do that part of the job.However, once the the installer (located in the X: drive) was about to install Window 7 on the system HDD, it asked me for a CD/DVD driver. I loaded the appropriate USB3 drivers at that stage and the installation process continued over the USB3 port.I had a closer look in the RAM drive (X:WindowsSystem32DriverStoreFileRepository), and indeed, there are no USB3 drivers present anywere in that folder, only USB2 drivers where in there, named: usb.inf_amd64... and usbpor.inf_amd64... So I was wondering, as USB3.0 is so common and the future standard, why aren't there any USB3 drivers in that folder present? Is there any possibility that the creators of the Windows 7 Clean Installation files (Digital River, or My Digital Live) could put USB3 drivers in the Win7CI package?
My windows 7 fails on my pc after successful installation, and also successful installation of drivers.How it goes :1. I set up windows 7 from USB. I clean format the entire hard disk.2. Windows successfully installed. Works great. 3. Install drivers. All successful. Works great. Restart after the driver is being installed.Successful.4. Works fine on day 1.5. Next day when I start, windows starts drive C: for disk check consistency. After checking the windows fails.6.Starts automatic repair and fails to do so. Nothing works."Automatic repair cannot repair your computerThis is what keeps on going on since the past last week. I kept automatic updates off. I even removed the RAM and the cell and motherboard and fitted it again
It fails on "Expanding Windows Files" (Or something like that) with a clean install.The error I'm getting is:Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x0070017.
I am trying to install Windows 7 on my Acer Predator 7750G but everytime the first installation phase stops it says that it cannot configure my computer so the installation will stop.I have had some virus problems on my HDD were i couldn't see what was on them, that is the reason why i have choosen to install from scratch on the computer!
So I have searched around and none of the solutions worked, but let me get to the basics:
DFI LanPark DK 790 FX Motherboard 3.2 GHz AMD Athlon X2 64 bit processor 4 GB DDR2 RAM Nvidia GeForce 8800 GTS Video card with 720 MB Ram
Hard drives:
Western Digital Raptor @ 70 GB (going to be used as the OS drive) Western Digital Caviar @ 80 GB
Maxtor 120 GB IDE drive (the other 2 are both SATA drives)
Sony DVD R/RW Drive using onboard audio
Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.
The notorious (or at least I think it is,) "Copying-files-phase-instantly-cuts-to-100%-then-gets-stuck-at-expanding-files-0%-and-fails-after-some-time" bug.I'm almost to the point of challenging my computer fist to a fist-fight.The story: I ordered my Gateway M285-E Monday, and I just got it today. I was so happy to see that it already had Windows XP Tablet Edition installed. Of course, I'm one of those "f*** that noise" kind of people. I formatted the hard-drive from the Windows 7 installer, and upon starting the actual installation process, "Copying Files" jumped to 100%, and went directly to Expanding Files......which hung at 0%, until it gave me the usual error telling me that the needed installation files couldn't be found / located etc.
So I thought, why not install Windows XP? Didn't work either. The installer wouldn't recognize the hard-drive. Wonderful. So I sat in angst, staring at the beautiful machine that had just ruined my day....I installed Ubuntu 10.10; worked fine. Absolutely flawless.I CANNOT install ANY version of Windows. It just seems impossible. Windows 7: Failed.Windows XP: Failed.Windows ME (I was desperate):Failed.And after formatting again, Ubuntu 10.10:Worked.System specs:Core Duo @1.86ghz1gb RAM (soon to be 2gb)60gb HDDATi Radeon x1400 graphics
I have a netbook that came with the starter edition. I am trying to install the pro edition over it. The install dies and tells me I cannot install it and I need to select Windows Anytime Upgrade instead. However, that will not accept my license key from my pro edition. Am I stuck with a disk I cannot use now?One of the install choices was to do a clean install and lose all of my files, applications, and settings. Is that my only choice?
I started with Windows 7 and when the computer reboots to install Windows XP it starts the installation process then the computer shuts off? What do I do?
My lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
I'm trying to install Windows 7 on a WD 500gb freshly formatted to NTFS. Windows 7 first copies the files and then says its starting up and then hangs up. My bios see's the hard drive and knows it's there. I never get a chance to use F6 to load the Sata drivers that I have on a floppy drive.
It never asks me. I first tried to load with the Sata Drive unpartitioned but that failed. So I am now trying to do it on a formatted drive. I'm not sure if the problem is that Windows 7 doesn't recognize that I have a Sata Drive attached. Can anyone give me some ideas for things to try?
I took the motherboard, processor, and ram back to Frys and got store credit. I changed from a Gigabyte motherboard to an Asus motherboard, same processor, and associated ram. Windows 7 loaded with no problems.
Fry's stated that the motherboard must have been bad due to the issues that I was having. The processor and ram were suspected to be good. When I loaded Windows 7 I didn't have to load any Sata drivers the bios and windows 7 picked up the Sata Drive with no problems.
I'm trying to repair my Windows 7 ultimate installation. When the procedure reaches its final step, I keep getting a message that the repair failed and that my system is being restored to its former state.Is there a way to depict the cause of this failure? Does Windows 7 keep a log? Is it accessible?Do you know of any other method to overcome this obstacle?
So, as @karlsnooks and @golden had said, I downloaded an ISO file from Official Windows 7 SP1 ISO from Digital River � My Digital Life.And using a Windows 7 USB/DVD Tool, I burned it into a USB stick.Now, when I boot from it, I get to the Window home screen, and when I proceed, I get this message:"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step." <Browse> <OK> <Cancel>When I browse and point it to the Boot folder, this message comes:No device drivers were found. Make sure that the installation media contains the correct drivers and then click OK.
The thing is I have installed the latest update to MSXML4 SP3 - in fact WU did it for me, but there is no MSXML4.dll in Windows/System32. 3 and 6 are there OK.I can't figure out why this is as I haven't done any registry cleaning.Tried sfc /scannow, it finishes OK but it says some files are corrupted.This is my spare Windows 7 Ultimate SP1 on Disk 1 partition 1 - in other words the 4th in a row of multi-boots with the boot files residing in Vista on C: (It goes C:, D:, then on the next disk L: and M:Dare I stick a Win 7 SP1 installation disk in and do an upgrade/repair install? Will that lose me my mutli-boot? I checked both my Windows 7 installations on my main PC and the one on my Netbook and neither one carries it. Neither do any of my Vista installations. But they all have the MSXML 4 SDK installed by Windows Update - but that installs into Program Files (x86) not the Systemroot.Perhaps there is a glitch in the installer as it seems to be thinking everyone has XP, as it has all - MSXML2,3, 4, and 6 DLL's in that exact location.
Today I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?
I am trying to install Windows 7 after getting attacked by some virus. So formatted the system C Drive. Now there is no OS. When i tried booting it from a bootable Windows 7 DVD, it gets installed almost, expanding files -- 100% but at the end i receive this wierd error."Windows could not prepare the computer to boot into the next phase of installation.To install Windows, restart the installation."
I've got a Gigabyte GA-EP45-UD3P mobo, and am trying to do a clean install of the Windows 7 trial edition. I was getting access errors, so after moving my memory around, and trying different sticks, I've come to a configuration which is getting me through that problem, but I've reached another problem.After the fourth step(I believe they are "Copying files, expanding files, installing features, installing updates"), the computer hangs for a minute or so then gives me the error message "Windows could not prepare the computer to boot into the next stage of the installation. To install Windows, restart the installation."I've retried this three times to no avail, and googled the problem, but the majority of the answers I am finding for this are for people upgrading from Windows Vista
I Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the
DISKPART
diskpart
list disk
select Disk X (X=disk where I installed all the OS, should be Disk 0)
list partition
select Partition X (X=partition containing OSX)
Virtual Disk Service error:
The pack is not online
and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.
I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.
I have an intermittent problem with my Windows 7 programme installed on my laptop. Very occasionally when I boot it will fail to launch stating that certain files cannot be found. I didn't record exact message but it is a system 32 file error.
I am able to reboot as the start launch is there, although it resembles the old 98 start launch, and it starts up again without issue.
I know it is vague but has anyone else experienced this? It affects me say 1 out of every 25 boots.
I recently acquired a used computer and put the hard drive from my old one into the new one and it would freeze and at the Windows boot logo and then BSOD. The previous owner suggested that I get a new hard drive as the motherboard is having issues reading an already formatted hard drive. I decided to recover the bootloader by following these steps: [code] You will need to replace C:\ in the example below with the letter for your boot drive! It's most likely C:, but it could be something else!attrib -h -s C:\boot\BCD..Now it takes me to the Windows Boot Manager and says that winload.exe (0xc0000428) Windows cannot verify the digital signature for this file.
Ok so about 6 months ago my dad bought an HP p6674y Desktop. Two days ago it failed to boot to windows 7 home premium. I ran the diagnostics that came with the HP's motherboard. It checked everything (CPU, RAM, S.M.A.R.T. status, Hard drive's connection to the motherboard) and everything checked out fine. But after the motherboards boot screen the screen goes black. Nothing, besides a little underscore (_) blinking in the top left of the screen. I really hate windows because there is no way to find out what failed like there is in linux. Does anybody have any ideas? I just ran a Norton scan and all we have is 18 tracking cookies that where deleted. Unless you have a bulletproof plan I really dont want to reboot the desktop. I got it up and running after leaving it without power all night long.
Recently i panned to build my system and put together the following config, all items were brand new....
1. MSI b75 motherboard (one SATA 6GB/s, Three SATA 3GB/s) 2. Intel i3-3220 3. Kingston SSD NowV100 64GB (SATA 6GB/s) 4. Corsain RAM 4GB 1600MHz, single module 5. DVD drive. 6. Cooler Master 550W
Now, during assembling i installed my new SSD on SATA 6GB/s port, DVD drive on SATA 3GB/s port and RAM, processor etc.Then i proceeded with standard Win7 installation through DVD and completed it successfully, installed all the drivers etc, and now my system was up and running.After few days of successful running, i am frequently encountering errors regarding boot failure and when i go to BIOS it does not show/detect my SSD drive and shows only DVD drive.So, i figured out that, as my SSD is not detected, boot process is unable to load windows.But strangely, when i ran my standard check procedures (i.e. i removed my PC off power supply, removed CMOS battery and reconnected all then boot again) then my system booted successfully.Now, the problem is that, my system runs for 4-5 days continuously and then suddenly the same boot failure error occurs my SSD does not show up in BIOS and then i again have to go through the whole process of removing power and clearing CMOS by removing battery and then reboot.
Note: I have checked my SSD firmware... it is up to date.my BIOS is also up to date.
Zebra barcode code printer s600 there is no usb port,iam using usb to serial converter,PL-2303 USB-to-Serial Adapter is already installed,in windows 7 64 bit pc.In the device manager we can see in ports prolific usb to serial to serial comm port 2 is installed correctly,but when i start installing the printer driver the USB virtual port is not available for installing the driver,is it possible to install printer by usb to serial cable,please give some valuable comments.
I just received a computer I bought about a week ago, yesterday. Last night, while it was on and downloading files, the power board it was plugged into shut off. Now, it's stuck in an endless loop of failing to boot. It keeps asking me to insert the Windows 7 installation disc and restart. I put the disc in but it stays stuck in the loop and I am unable to do anything. I've managed to get it to go to the system repair setup, but it continued to try to repair the problems for over 6 hours and nothing has happened.
