Windows 7 Installation Copying Files Goes To 100% Instantly,then Fails?
Dec 9, 2010
The notorious (or at least I think it is,) "Copying-files-phase-instantly-cuts-to-100%-then-gets-stuck-at-expanding-files-0%-and-fails-after-some-time" bug.I'm almost to the point of challenging my computer fist to a fist-fight.The story: I ordered my Gateway M285-E Monday, and I just got it today. I was so happy to see that it already had Windows XP Tablet Edition installed. Of course, I'm one of those "f*** that noise" kind of people. I formatted the hard-drive from the Windows 7 installer, and upon starting the actual installation process, "Copying Files" jumped to 100%, and went directly to Expanding Files......which hung at 0%, until it gave me the usual error telling me that the needed installation files couldn't be found / located etc.
So I thought, why not install Windows XP? Didn't work either. The installer wouldn't recognize the hard-drive. Wonderful. So I sat in angst, staring at the beautiful machine that had just ruined my day....I installed Ubuntu 10.10; worked fine. Absolutely flawless.I CANNOT install ANY version of Windows. It just seems impossible. Windows 7: Failed.Windows XP: Failed.Windows ME (I was desperate):Failed.And after formatting again, Ubuntu 10.10:Worked.System specs:Core Duo @1.86ghz1gb RAM (soon to be 2gb)60gb HDDATi Radeon x1400 graphics
View 1 Replies
ADVERTISEMENT
Apr 5, 2011
It fails on "Expanding Windows Files" (Or something like that) with a clean install.The error I'm getting is:Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x0070017.
View 4 Replies
View Related
Jun 20, 2010
i have a problem while installing Windows 7 (new installation).After booting from CD rom i see a loading bar 2 times (1st runs fast, second takes a while), saying "windows is loading files". then the screen switches to "starting windows" and freezes.. i've waited over 30 min., but nothing happens .sometimes i get a blue screen, saying "BAD_SYSTEM_CONFIG_INFO", with error code "STOP 0x00000074"when starting in safe mode, it always get stuck while loading disk.sysMy configuration:[CODE]
View 9 Replies
View Related
Jun 8, 2011
I'm back with another issue. I'm setting up a PC for recording TV and it needs Windows 7 or Vista as the OS (since they come pre-installed with Media Center). This is the PC.The specs are also included: Shuttle XPC Barebone.It contains 2GB DDR2 ram and a 500GB Seagate HDD.During the windows installation (either Windows 7 or Vista) three things can, happen,-When the disc boots up, the GUI of the installation freezes and hangs. indefinitely.-When windows begins to install and expand the files, the PC will reboot randomly.-During install, the screen will go black with only a few red pixels present.*This happens with both 32/64bit installations.I tried putting in a different video card to see if that was the issue, but no dice. Also, I know this system can run windows vista/7 because my father is using the same exact PC model (SN68SG2) and is running Vista ultimate 32bit just fine.I have already diagnosed the RAM and HDD and they are in working order.For some reason, the only OS that installs without issues is XP. Worse case scenario, I can get XP media center edition, but I'd have to obtain a disc or iso to even test it out.
View 9 Replies
View Related
Feb 20, 2012
i try for 3 days to install Windows7 on my OSZ Vertex SSD. As installationsource i use a usb disk.The Setup starts fastly withput andy problems, but hang at expanding files(70%-90%). I tested the setup with my old sata hdd and the installation passes without any problems.
View 2 Replies
View Related
Aug 23, 2012
my Windows 7 Ultimate Installation is hanging an "Expanding Files".. But wait, I don't think its a Windows issue. I have read and read some more on how to fix this and have tried (1) to change the SATA ports on the drives, both HD and DVD-ROM (2) to change hard-drives (both new) (3) to switch out 3 different DVD drives to ensure the drive wasn't failing (4) to check the BIOS settings (5) to remove the bios battery and hold down the power button the erase the CMOS Memory (6) to use different OS Discs (7) to use completely different operating systems- Windows 7, Windows XP, Linux, ReactOS (8) to remove memory and swap with memory that I know is good.The ultimate object is to successfully install Windows 7 on this machine; but with all of the above being done and it still hanging on "Expanding Windows Files" and getting stuck to the point that I cannot move my mouse, I am unsure of what to do at this point.
View 4 Replies
View Related
Sep 13, 2012
Got Windows 7 Clean Installation over the computer's USB 3.0 port done without too many problems but with some hassle anyhow.For the clean installation I followed the procedure of GreGrocker Clean Reinstall - Factory OEM Windows 7 and put the whole installation onto a 4GB USB Flash Drive.From the computer's USB 2.0 ports there was no problem whatsoever and Windows 7 got installed very quickly.However, over the computer's USB 3.0 port things weren't easy. I finally got it done by uploading the proper USB 3.0 Root Hub and Controller drivers *.ini and *.sys files.Strangely enough, at first everything went well over the USB3 port and the WinPE environment with its RAM drive (X:) got deployed correctly. The only sensible explanation for that is that the computer's BIOS used the appropriate and build-in USB3 driver to do that part of the job.However, once the the installer (located in the X: drive) was about to install Window 7 on the system HDD, it asked me for a CD/DVD driver. I loaded the appropriate USB3 drivers at that stage and the installation process continued over the USB3 port.I had a closer look in the RAM drive (X:WindowsSystem32DriverStoreFileRepository), and indeed, there are no USB3 drivers present anywere in that folder, only USB2 drivers where in there, named: usb.inf_amd64... and usbpor.inf_amd64... So I was wondering, as USB3.0 is so common and the future standard, why aren't there any USB3 drivers in that folder present? Is there any possibility that the creators of the Windows 7 Clean Installation files (Digital River, or My Digital Live) could put USB3 drivers in the Win7CI package?
View 1 Replies
View Related
Jan 13, 2013
My windows 7 fails on my pc after successful installation, and also successful installation of drivers.How it goes :1. I set up windows 7 from USB. I clean format the entire hard disk.2. Windows successfully installed. Works great. 3. Install drivers. All successful. Works great. Restart after the driver is being installed.Successful.4. Works fine on day 1.5. Next day when I start, windows starts drive C: for disk check consistency. After checking the windows fails.6.Starts automatic repair and fails to do so. Nothing works."Automatic repair cannot repair your computerThis is what keeps on going on since the past last week. I kept automatic updates off. I even removed the RAM and the cell and motherboard and fitted it again
View 11 Replies
View Related
Mar 10, 2011
i've had some issues installing sp1 (7 ultimate, latest windows updates) via windows update when the installation fails on a few different error codes, but i have gotten it to install a few times. each time the installation finishes, i restart the computer when prompted and it goes through the update process when shutting down, then after the windows 7 splash screen ("starting windows") passes, the screen goes blank (black screen, no video- monitor displays "going to sleep" message) and the HDD light on the computer is lit solid. i've left the computer sitting for hours with no change- i eventually get Windows to boot again by using the install disc to do a Windows restore, but i haven't been able to get past this yet.
View 6 Replies
View Related
Jul 24, 2010
This issue has just start a couple of days ago were the computer would restart at the point of the boot logo just before the orbs came in, i have tried booting in all safe modes and the computer would restart, tried repair and it restarts before finished loading. I have tried using the os install disk but it also restarts. There is no BSOD. Is there a way to fix this or would i have to replace my motherboard?
View 6 Replies
View Related
Aug 2, 2010
I am trying to install Windows 7 on my Acer Predator 7750G but everytime the first installation phase stops it says that it cannot configure my computer so the installation will stop.I have had some virus problems on my HDD were i couldn't see what was on them, that is the reason why i have choosen to install from scratch on the computer!
View 9 Replies
View Related
Oct 9, 2009
sql server installation fails on windows 7.
View 9 Replies
View Related
Apr 28, 2011
I have a brand new windows 7 home premium package and I would like to install on it on my laptop (windows xp). The cd drive however does not work and I was wondering if I could load the contents of the disc on my desktop and save them onto my USB stick, which would then go into my laptop?
View 8 Replies
View Related
Mar 20, 2009
I'm facing some trouble installing windows 7 x64 build 7057
When i click "install now" button after booting from the DVD-Rom. I get an error at times stating that i need DVD/CD-Rom Device Drivers and it does not detect the harddrive. However if i wait a little while before clicking the "Install Now" button, i pass on to Licence Agreement page.
From there i get a choice to Upgrade or Custom Install. If i chose upgrade it gives compatibility issue report as i do not have any OS running on the Drive i wan to Install Windows 7 on.
When i chose Custom i get to choose a partition. I chose the Primary Drive C partition as this 120GB hdd has no windows installed (my regular 500GB HDD that has winxp and vista64 is physically disconnected through this process). The Partition 1 has 29.8GB free when formated. I start the installation on that
The first Step "Copying Windows Files" takes few seconds and reaches 100% without error
The Second Step "Expanding Windows Files" stays on 0% for around 5 to 10 minutes and returns an error:
"Windows Cannot Install Required Files. Make Sure all files required for Installation are available, and restart the installation."
After I click 'OK', it says on the Screen "The installation was cancelled. Any changes that were made to your computer during the installation process will not be saved."
I do not understand if this is my hardware related issue or do i have a bad DVD. My DVD seems to be loading up fine and files do copy around from it. The ISO i copied this from seems to be ok. Could someone explain why am I facing this error and how can I solve it?
View 7 Replies
View Related
Feb 9, 2010
So I have searched around and none of the solutions worked, but let me get to the basics:
DFI LanPark DK 790 FX Motherboard
3.2 GHz AMD Athlon X2 64 bit processor
4 GB DDR2 RAM
Nvidia GeForce 8800 GTS Video card with 720 MB Ram
Hard drives:
Western Digital Raptor @ 70 GB (going to be used as the OS drive)
Western Digital Caviar @ 80 GB
Maxtor 120 GB IDE drive (the other 2 are both SATA drives)
Sony DVD R/RW Drive
using onboard audio
Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.
View 9 Replies
View Related
Oct 13, 2012
I have two laptops on my network both wireless, I also have a WD Live Hub on it too but that's hard wired into the router.
When I copy over large files to the WD box from either PC, sometimes more often than not (randomly) it will at some stage just reboot the PC, no warning nothing, Just windows restarts. I can then start the copy off again and it might work it might not.
There is no set pattern to this and its annoying that if you walk away while copying then you don't know if the copy is 100% successful because you come back and the machine is stilling there with nothing on the desktop and quite happy. Has the copy finished or has the machine restarted!?! I have to leave another window open to be 100% sure.
The second laptop is slightly different to the first in that does a BSOD memory dump when it happens and then reboots once its dumped 100% of the memory, where as the first just restarts instantly.
I don't know if anyone else is having or had this type of issue, is it because its the 64bit OS? I'm sure before when I had XP on both machines this never happened so its only since I upgraded them to 7 64bit but that was a long time ago.
I only get this issue when copying files to my WD box, the rest of the time - playing games, browsing the net, watching movies, the laptops are fine...
View 3 Replies
View Related
Mar 2, 2010
Yesterday I needed to copy some data stored on a DVD and it took more than ONE hour to transfer the files (11250 files and 151 folders for 625MB) to the hard drive.
I booted on my WinXP partition (so the very same hardware was used) and it took 20 minutes for it to complete the same task.
The data I needed to transfer were full of very small files and although I could hear my DVD player spinning at full speed on WinXP, it was very choppy on Windows 7 as if it was constantly seeking the files on the disc.
View 9 Replies
View Related
Feb 3, 2009
I tried doing this. Example, game files/data from my XPdocs on C: to my Windows 7 docs on D: couldnt do it, just gave me a chime, no dialogue box or anything. Also tried to move a file from my desktop to either mydocs or to program files folder, same thing. After that, even took ownership of all affected folders/files, ones being moved and destination folder. Still the same.
Question: is there some type of security setting i am missing? anyone else test this? I have moved files to mydocs before, and now i cant move anything to there, has me confused now. Nothing special about a file or folder i am trying to move, permissions ect.
Tried both cut and paste, and copy, same problem either way. No protected files/folders involved
View 2 Replies
View Related
Jan 31, 2013
I have 2 internal-sata hard drives(320 gig. And 2tb.) and 1 external usb/2.0 hard drive (750 gig.). The pc is an old dell gx520 tower with a fresh install of Windows 7 pro. No antivirus, network connection, or firewall enabled. Processor is a Pentium4 running 3 GHz with 1.5 gigs of ram. This is the problem: If I do a search on the 2tb. Drive for all of the jpegs, I have a total of about 84000 pictures. When I select all of the pictures and right click-copy and try to paste to another hard drive the pc will lock up and won't display a copy status window. Windows says it's not responding. Now, if I right click-copy a single folder which has anywhere, from a few files to several hundred gigs. of data in it, using the same 2tb. Drive, it will copy over to another drive just fine. I have tried, changing the swap file from "windows managed" to, up to 20 gig. Thinking the search was maybe having to write to the swap file. This didn't work. I also booted in to safe mode and tried to do the copy from the 2tb. To the 320gig. drive and still no difference. I have tried this with windows copy handler and teracopy. It all has something to do with the fact that I am doing a search for the files before copying them.
View 1 Replies
View Related
Dec 22, 2011
I am working in Windows 7 XP Mode, trying to install and run a Microsoft utility called: WT1230: Batch File Converter for PowerPoint for Windows 95. (See WT1230: Batch File Converter for PowerPoint for Windows 95). Yes, the utility is intended for Win95, but I'd like to see if I can get it running in XP Mode. The utility installation instructions ask that I copy 2 files to the "Windows/system" folder. Of course, these instructions were written for Win95, not XP, let alone XP Mode. Still... if I copy the files, the core executable runs fine, but it can't find the 2 files that should be in "Windows/System". So, I gather XP Mode must have its own Windows/System folder.
View 1 Replies
View Related
Apr 22, 2011
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared.If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine.I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies
View Related
May 27, 2009
Everything is so slow e.g. opening of FireFox, opening of Excel, opening of Task Manager etc. While I'm copying 750GB of data from one partition to another partition, why? I'm running Windows 7 x64 7100 on a separate partition and I have a Q6600, 4GB ram and 5 X 1 TB WD Black edition drives...Task Manager is showing 33 running processors, 3 - 5 % CPU usage and 1.35GB of ram usage. Is this a Windows 7 bug? Windows 7 is super fast when I'm not copying/transferring large files between partitions!
View 9 Replies
View Related
Jul 3, 2012
Currently my Windows 7 is on the C drive, now my question is this: Is there a way I can say put in a SSD, then copy my entire windows and the Programs Files, Program Files x86 and the users folder to it, then switch my old HDD to the D drive and the SSD to the C and have it work just fine? Is there an easy way to do this? or will it require me to reinstall windows to do it? Been thinking about getting a 120 GB ssd for my os/program drive, and using my 1.5 tb drive as storage.
View 3 Replies
View Related
Sep 29, 2010
I have a netbook that came with the starter edition. I am trying to install the pro edition over it. The install dies and tells me I cannot install it and I need to select Windows Anytime Upgrade instead. However, that will not accept my license key from my pro edition. Am I stuck with a disk I cannot use now?One of the install choices was to do a clean install and lose all of my files, applications, and settings. Is that my only choice?
View 6 Replies
View Related
Mar 28, 2012
My lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
View 1 Replies
View Related
Dec 7, 2009
I'm trying to install Windows 7 on a WD 500gb freshly formatted to NTFS. Windows 7 first copies the files and then says its starting up and then hangs up. My bios see's the hard drive and knows it's there. I never get a chance to use F6 to load the Sata drivers that I have on a floppy drive.
It never asks me. I first tried to load with the Sata Drive unpartitioned but that failed. So I am now trying to do it on a formatted drive. I'm not sure if the problem is that Windows 7 doesn't recognize that I have a Sata Drive attached. Can anyone give me some ideas for things to try?
I took the motherboard, processor, and ram back to Frys and got store credit. I changed from a Gigabyte motherboard to an Asus motherboard, same processor, and associated ram. Windows 7 loaded with no problems.
Fry's stated that the motherboard must have been bad due to the issues that I was having. The processor and ram were suspected to be good. When I loaded Windows 7 I didn't have to load any Sata drivers the bios and windows 7 picked up the Sata Drive with no problems.
View 2 Replies
View Related
Dec 18, 2010
We update our client's software *.exe programs by storing the update code in a blob record in a server based MySQL database.
When the user logs on to the main program on his PC, if there are updates, a dialog message displays and the updates are written from the server to the local directory -- the same directory as the main program resides.
This has worked very well on XP (where we used *program files* as the directory).
It has also worked fine in vista and 32bit windows 7 (where we use the user's app data oaming directory.
On Windows 7 64-bit however, the update fails. It opens the file name of the updated program with zero bytes and then displays the message:
"Could not write to... c:Users[user]AppDataRoaming.. etc."
I've tried running the main program as administrator. I've turned off UAC. I suspect this is a security issue, but is there any workaround?
View 3 Replies
View Related
Aug 28, 2012
i noticed something really strange. i tried copying three iso files from my laptop to my external HDD. the problem is that after one iso is copied the copying process stops and resumes again after a pause and after that it pauses again and the third file starts. why it pauses to copy? i tries usb 3.0 and 2.0.in usb 3.0 the spped is around 94-95K Mbps. but once it starts to copy the second iso it drops to around 30K Mbps.its same with both the external HDDs.
View 2 Replies
View Related
Apr 26, 2012
I am trying to copy some files to my external hard disk but some certain files doesn't want to move or copy at all no matter how many times I have tried. I also formatted my HDD to NTFS but no result.
View 1 Replies
View Related
May 5, 2012
I have windows 7 pro 64 bit running on my box. One of the devices on my network is a media reader and a local drive connected to it. Whenever I try to transfer large files (350 mb and above) the transfer speed never displays and the copy animation runs until I get an error message telling me that Windows 7 can no longer access my media reader. Smaller files copy without issue. I've seen other posts with a similar problem but they don't appear to be exactly the same as this.
View 5 Replies
View Related
Apr 1, 2009
Got a weird problem that happens when I try to copy files over my network to other PCs. It just freezes when I copy large files!
For example, I tried to copy the Windows beta ISO over to my 2nd computer and the computer just froze. I waited a few minutes but nothing happened so I had to press the reset button.
Is there anything I can do?
View 1 Replies
View Related
