It fails on "Expanding Windows Files" (Or something like that) with a clean install.The error I'm getting is:Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x0070017.
View 4 Replies
My laptop was running windows 7 and then crashed. It was getting slower and slower, then crashed during a virus scan in safe mode. After that, it wouldn't boot up windows. It said something like disk error, press ctrl alt delete to restart. Safe mode doesn't work either. So now I'm trying to reinstall windows 7, and the installation fails when at expanding files. It says the files are corrupted and can't be installed. I've tried 3 diff windows 7 cds. It gives errors at different points during the expanding every time. Now its just hanging at expanding windows files (0%). Its been here for 20 mins so far.
View 9 Replies View Relatedso i'm upgrading from xp and windows 7 installation keeps freezing at expanding files (36%).
View 2 Replies View RelatedI am trying to install Windows 7 64 bit on my system and it freezes during expanding files. I searched all forums and information thats available online, tried everything that was listed but no solution yet.
My system is Foxconn P9657AB-8EKRS2H LGA 775 Intel P965 Express ATX Intel Motherboard, Intel Quad Core Processor, 6 GB RAM on 3 slots, I had a 250 GB before this process but i bought a 1 TB 7200 RPM HD thinking that it would solve the problem somehow.
I took out all USB items including mouse & keyboard and using PS2 mouse/kb now. Also took out 2 RAMs leaving only one 2 GB. Now the machine only has the mother board, processor, video card, 2 gb ram, ps2 mouse & keyboard, and the monitors.
I checked BIOS, and i have the latest update. Tried everything on BIOS from setting it to Safe Mode, Disabling all USB ports, Internal Audio Device, and pretty much everything that i found online. Im just yet to flush the BIOS, change DVD drive and install it from a flash drive.
Installations stops at " Expanding windows files 0 % " and stuck there, does not go further.
View 7 Replies View RelatedI have a custom built pc, has quad core phenom processor 4gb ram. Gigabyte motherboard 500gb hard drive with windows 8 preview installed. And a formatted 250gb. I'm trying to install windows 7 on the formatted drive but every time off cd hangs on expanding files. So I thought I'd try USB stick. Got a 16gb cruzer blade. Formatted and made bootable. Windows on it. Will start via my computer but whenever I try booting it on standup I get an error about not being digitally signed. I've tried numerous things but will not boot from USB.
View 3 Replies View Relatedwindows 7 installation taking too much time at expanding files showing 0% for intel i5 processor & 8GB ram.
View 5 Replies View RelatedI'm trying to upgrade to Windows 7 from Vista Home Premium.
I got the upgrade from DigitalRiver, in 32 bit as suggested by my very techie brother. I run the install, everything seems fine, but it seems to get "hung up" at 48% in the last step (I think it's "Expanding Files?") The cursor still moves, and the ellipses are still progressing, but it doesn't move beyond that. I've tried three times, leaving it overnight for 9+ hours, and nothing beyond 48%!
I have an HP Pavillion dv6000 with Vista Home Premium 32bit, Core2Duo processor, 2GB Ram.
I tried many times to install 7 ultimate but it just freezes at expanding files even the 3 dots freeze i tested my ram and disc for errors but everything is ok i left only 1 ram but nothing i disabled all the peripherals in my mobo but nothing also checked my hdd for errors and its ok aswell..xp and vista install without problems..
System Specs: MSI 975x Platinum PowerUp Edition
Intel Core 2 Duo E6600
2X1GB DDR2 Memories
EVGA 9800 GTX+
Seagate 320GB
I am trying to install windows 7 64 with a new M3A79-T. It keeps freezing at expanding files with error 0x80300001. I figure this might be due to missing sata drivers but when i click load drivers during the installationwindows doesn't recognize anything. I tried with the mobo support dvd and i tried burning drivers from the mobo website and using that dvd. In either case i can browse to the dvd but all the foldersin it are empty, so nothing to install even though the driver are definitely there. when i click on scan
View 7 Replies View RelatedThe notorious (or at least I think it is,) "Copying-files-phase-instantly-cuts-to-100%-then-gets-stuck-at-expanding-files-0%-and-fails-after-some-time" bug.I'm almost to the point of challenging my computer fist to a fist-fight.The story: I ordered my Gateway M285-E Monday, and I just got it today. I was so happy to see that it already had Windows XP Tablet Edition installed. Of course, I'm one of those "f*** that noise" kind of people. I formatted the hard-drive from the Windows 7 installer, and upon starting the actual installation process, "Copying Files" jumped to 100%, and went directly to Expanding Files......which hung at 0%, until it gave me the usual error telling me that the needed installation files couldn't be found / located etc.
So I thought, why not install Windows XP? Didn't work either. The installer wouldn't recognize the hard-drive. Wonderful. So I sat in angst, staring at the beautiful machine that had just ruined my day....I installed Ubuntu 10.10; worked fine. Absolutely flawless.I CANNOT install ANY version of Windows. It just seems impossible. Windows 7: Failed.Windows XP: Failed.Windows ME (I was desperate):Failed.And after formatting again, Ubuntu 10.10:Worked.System specs:Core Duo @1.86ghz1gb RAM (soon to be 2gb)60gb HDDATi Radeon x1400 graphics
I have windows vista and was going through a Windows 7 upgrade which failed at the third step i.e. 'expanding windows file' at 21% and displayed the error "Windows couldn't prepare the computer to boot into the next phase of installation. To install windows, restart the installation." i have tried to install it and done all over the same thing 3 times but of no use. It again shows the same error at that very point.
View 1 Replies View Relatedim having trouble installing windows 7. i burnt the disc and started custom installation, and it copied all the windows files but then it got stuck on expanding windows files. it didnt freeze, it just didnt get past the last 1%. and the worst thing is i cant use the computer with vista anymore, because when i try to boot it up it opens up some kind of system restore that doesn't work. should i just leave the install screen on overnight
View 2 Replies View RelatedI'm trying to install a fresh copy of Windows 7 Ultimate 32 bit on my HP laptop. I'm using an ISO file burned onto a DVD disc.The problem I'm having is that the installation stops at 'Expanding Windows files'. It stays on 0% for hours and refuses to continue. It still allows me to move the cursor around but nothing is happening.I tried burning the ISO file using several different programs at different speeds but all with the same outcome.
View 4 Replies View Relatedwindows cannot install required files
View 2 Replies View RelatedI'm trying to install a fresh copy of Windows 7 Ultimate 32 bit on my HP laptop. I'm using an ISO file burned onto a DVD disc.The problem I'm having is that the installation stops at 'Expanding Windows files'. It stays on 0% for hours and refuses to continue. It still allows me to move the cursor around but nothing is happening. I tried burning the ISO file using several different programs at different speeds but all with the same outcome.
View 2 Replies View RelatedAnyways, I used to have windows 7 installed in my iMac and everything was working fine. Except that one day my Mac partitioned didn't want to boot. So I decided to reformat the drive and reinstall everything. After everything was installed I tried to install windows again except now it gets stuck at expanding windows files. 0% It won't get passed that.
From reading on here I saw someone with a similar issue but it involved his SATA III connections. As you all well know iMacs are pretty hard to even move any hardware around. I haven't touched it so I wanted to know if this might be hardware related. If it is what does it usually involve? Hard drive?
I'm trying to install Windows 7 on my mom's laptop. I got to the custom install and I selected the HDD. I pressed the button for additional options and clicked format.After about 4-5 seconds it said it has been formated (although it seemed a little bit too quickly for me) and I continued to install. It gets to the install screen and shows "Copying Windows Files 0%...". It quickly and somehow, without showing 100% done "skips" the step giving it a tick and moves to expanding the files. Expanding stays on 0% and nothing else. No indication of the DVD reading, no indication of the HDD writing. It just stays like that and...
NOTHING!!! This Windows 7 is from a torrent and the exact same edition is running on my PC, installed just fine. I tried several other CD's and on one of them it just got to the second restart and IT DIDN'T REBOOT! Even after waiting about 10 minutes it just did nothing. I restarted the laptop manually and then the install started from the beginning... Got any ideas what to do??? Please help, this is very VERY important!!!
Everytime I'm installing windows it fails and say that the is a missing or corrupted file.
View 2 Replies View RelatedSo I'm trying to install Windows 7 via XP SP2 but every time I try it gets to the expanding files part(27%) and cancels the whole installation saying Windows could not prepare the computer too boot into the next phase. I ran a chkdsk scan on the drive and unplugged all USB devices and some people said that Windows couldn't find the HDD Controllers so I installed my chipset drivers too but still nothing.I can't really format these partitions(especially C: since I need the XP installation on it to install Win 7)What could be cause of this? Can a damaged or missing bootsector(or bootmgr) be to blame?
View 2 Replies View RelatedI wanted to install a fresh installation of windows 7 on my computer so I decided to load up my boot disc.
1. I deleted my partitions until I had a maximum of 233gb of free space.
2. I created a new partition from the free space. Windows setup suggested to make a primary partition of 100 mb.
3. System created two new partitions. One is primary partition (233 gb), the other is the system partition (100 mb)
4. Proceeded to install windows on the new partition created.
5. Copying windows files went from 0% to 100% instantly
6. Stuck at Expanding windows files at 0%.
7. Restarted my computer to boot up windows to see what's wrong.
8. Windows boot manager is missing, only thing I can do is reinstall windows but I can't
9. Can't do a startup repair cause it fails.
10. Did a cmd command for bootrec.exe /FixMbr and bootrec.exe /Fixboot and both operations are successful. However, still can't load up windows desktop.
Problem: I deleted my partitions and created new ones but I can't install windows onto the partition because the screen is stuck at expanding windows files at 0%. I got an error: 0x80070017. Windows cannot install required files. The file may be corrupt or missing. I also can't load into windows desktop because bootmanager is missing.
Ok I have noticed alot of people have had problems with this myself included, and the answer is almost too simple.The problem I was having was once I got to the expanding files step it would get to 89% within a few minutes. Then it would hang for hours stuck at 89%. I tried restarting the installation 4 times. The first time it only got to 9% and stalled.So on my fourth attempt after watching it hang for a good 2 hours I ejected the installation disk in the middle of installation and popped in another another Windows 7 RC installation disk that I forgot I had just to see what would happen. What happened is it immediately finished expanding from 89% and the installation was complete in about 20 minutes.I should note that the first installation disk I was trying was a Memorex that had just been pulled from a jewel case prior to burning. The second disk I used was a Verbatim that had been burned some time ago and was actually pretty scratched up.Both of the disks where burned using the same .iso downloaded from MSDN using the same burner and ImgBurn as the burning software.
View 5 Replies View RelatedI have recently decided to try Windows 7 and made the necessary preparations. I am trying to build a dual boot system with the OEM 32bit Vista Home Premium and 64bit Windows 7. My machine is far above the specs and I have 3gb ram. I burned the image twice after reviewing the other posts in the forum. I burned the first on at 8x and after reviewing prev posts I burned again at 4x. Both freeze at the expanding files 0%. The first one would hang for hours until I told it to cancel. The new one hangs for a few minutes and then gives an error that there is a corrupt or missing file.I also read that this may be a result of ACHI but my bios does not allow me to disable.
View 7 Replies View RelatedOkay i can get the windows installion all the way to part 2 installing windows where it says expanding files it will get to around the high 80% or 90% complete then i will get an error that says windows cannot access the installion sources verify that the installation sources are accessible, and restart the installation. And i restart and try again and it gives me the same thing.
View 2 Replies View RelatedI'm back with another issue. I'm setting up a PC for recording TV and it needs Windows 7 or Vista as the OS (since they come pre-installed with Media Center). This is the PC.The specs are also included: Shuttle XPC Barebone.It contains 2GB DDR2 ram and a 500GB Seagate HDD.During the windows installation (either Windows 7 or Vista) three things can, happen,-When the disc boots up, the GUI of the installation freezes and hangs. indefinitely.-When windows begins to install and expand the files, the PC will reboot randomly.-During install, the screen will go black with only a few red pixels present.*This happens with both 32/64bit installations.I tried putting in a different video card to see if that was the issue, but no dice. Also, I know this system can run windows vista/7 because my father is using the same exact PC model (SN68SG2) and is running Vista ultimate 32bit just fine.I have already diagnosed the RAM and HDD and they are in working order.For some reason, the only OS that installs without issues is XP. Worse case scenario, I can get XP media center edition, but I'd have to obtain a disc or iso to even test it out.
View 9 Replies View Relatedi try for 3 days to install Windows7 on my OSZ Vertex SSD. As installationsource i use a usb disk.The Setup starts fastly withput andy problems, but hang at expanding files(70%-90%). I tested the setup with my old sata hdd and the installation passes without any problems.
View 2 Replies View Relatedmy Windows 7 Ultimate Installation is hanging an "Expanding Files".. But wait, I don't think its a Windows issue. I have read and read some more on how to fix this and have tried (1) to change the SATA ports on the drives, both HD and DVD-ROM (2) to change hard-drives (both new) (3) to switch out 3 different DVD drives to ensure the drive wasn't failing (4) to check the BIOS settings (5) to remove the bios battery and hold down the power button the erase the CMOS Memory (6) to use different OS Discs (7) to use completely different operating systems- Windows 7, Windows XP, Linux, ReactOS (8) to remove memory and swap with memory that I know is good.The ultimate object is to successfully install Windows 7 on this machine; but with all of the above being done and it still hanging on "Expanding Windows Files" and getting stuck to the point that I cannot move my mouse, I am unsure of what to do at this point.
View 4 Replies View RelatedI deleted all my hard drive partitions and formatted my hard drive to wipe it clean. Now when I try to install Windows 7 onto my computer, the DVD boots and the installation begins. The installation will complete the "Copying windows files" task in seconds, but sticks at 0% on "Expanding files" for about 30 seconds. I will then receive an error that reads "Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the application. Error code: 0x80070017".I researched this error but couldn't find a resolution. One suggestion was to download my hard drive's drivers onto a pen drive and load them in the installation, but t also tried installing Windows Vista and received the same problem.The error in this case has nothing to do with the copy. I have used many different Windows 7 builds, many different DVDs, burning at different speeds, all producing the same problemOnly when using the Windows 7 RC disc I was asked to "load drivers" as a requirement.Other builds didn't require me to load drivers.
View 9 Replies View RelatedGot Windows 7 Clean Installation over the computer's USB 3.0 port done without too many problems but with some hassle anyhow.For the clean installation I followed the procedure of GreGrocker Clean Reinstall - Factory OEM Windows 7 and put the whole installation onto a 4GB USB Flash Drive.From the computer's USB 2.0 ports there was no problem whatsoever and Windows 7 got installed very quickly.However, over the computer's USB 3.0 port things weren't easy. I finally got it done by uploading the proper USB 3.0 Root Hub and Controller drivers *.ini and *.sys files.Strangely enough, at first everything went well over the USB3 port and the WinPE environment with its RAM drive (X:) got deployed correctly. The only sensible explanation for that is that the computer's BIOS used the appropriate and build-in USB3 driver to do that part of the job.However, once the the installer (located in the X: drive) was about to install Window 7 on the system HDD, it asked me for a CD/DVD driver. I loaded the appropriate USB3 drivers at that stage and the installation process continued over the USB3 port.I had a closer look in the RAM drive (X:WindowsSystem32DriverStoreFileRepository), and indeed, there are no USB3 drivers present anywere in that folder, only USB2 drivers where in there, named: usb.inf_amd64... and usbpor.inf_amd64... So I was wondering, as USB3.0 is so common and the future standard, why aren't there any USB3 drivers in that folder present? Is there any possibility that the creators of the Windows 7 Clean Installation files (Digital River, or My Digital Live) could put USB3 drivers in the Win7CI package?
View 1 Replies View RelatedMy windows 7 fails on my pc after successful installation, and also successful installation of drivers.How it goes :1. I set up windows 7 from USB. I clean format the entire hard disk.2. Windows successfully installed. Works great. 3. Install drivers. All successful. Works great. Restart after the driver is being installed.Successful.4. Works fine on day 1.5. Next day when I start, windows starts drive C: for disk check consistency. After checking the windows fails.6.Starts automatic repair and fails to do so. Nothing works."Automatic repair cannot repair your computerThis is what keeps on going on since the past last week. I kept automatic updates off. I even removed the RAM and the cell and motherboard and fitted it again
View 11 Replies View Relatedi've had some issues installing sp1 (7 ultimate, latest windows updates) via windows update when the installation fails on a few different error codes, but i have gotten it to install a few times. each time the installation finishes, i restart the computer when prompted and it goes through the update process when shutting down, then after the windows 7 splash screen ("starting windows") passes, the screen goes blank (black screen, no video- monitor displays "going to sleep" message) and the HDD light on the computer is lit solid. i've left the computer sitting for hours with no change- i eventually get Windows to boot again by using the install disc to do a Windows restore, but i haven't been able to get past this yet.
View 6 Replies View Related
