im having trouble installing windows 7. i burnt the disc and started custom installation, and it copied all the windows files but then it got stuck on expanding windows files. it didnt freeze, it just didnt get past the last 1%. and the worst thing is i cant use the computer with vista anymore, because when i try to boot it up it opens up some kind of system restore that doesn't work. should i just leave the install screen on overnight
View 2 RepliesI'm trying to install a fresh copy of Windows 7 Ultimate 32 bit on my HP laptop. I'm using an ISO file burned onto a DVD disc.The problem I'm having is that the installation stops at 'Expanding Windows files'. It stays on 0% for hours and refuses to continue. It still allows me to move the cursor around but nothing is happening.I tried burning the ISO file using several different programs at different speeds but all with the same outcome.
View 4 Replies View Relatedwindows cannot install required files
View 2 Replies View RelatedI'm trying to install a fresh copy of Windows 7 Ultimate 32 bit on my HP laptop. I'm using an ISO file burned onto a DVD disc.The problem I'm having is that the installation stops at 'Expanding Windows files'. It stays on 0% for hours and refuses to continue. It still allows me to move the cursor around but nothing is happening. I tried burning the ISO file using several different programs at different speeds but all with the same outcome.
View 2 Replies View RelatedAnyways, I used to have windows 7 installed in my iMac and everything was working fine. Except that one day my Mac partitioned didn't want to boot. So I decided to reformat the drive and reinstall everything. After everything was installed I tried to install windows again except now it gets stuck at expanding windows files. 0% It won't get passed that.
From reading on here I saw someone with a similar issue but it involved his SATA III connections. As you all well know iMacs are pretty hard to even move any hardware around. I haven't touched it so I wanted to know if this might be hardware related. If it is what does it usually involve? Hard drive?
It fails on "Expanding Windows Files" (Or something like that) with a clean install.The error I'm getting is:Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x0070017.
View 4 Replies View Relatedso i'm upgrading from xp and windows 7 installation keeps freezing at expanding files (36%).
View 2 Replies View RelatedI'm trying to install Windows 7 on my mom's laptop. I got to the custom install and I selected the HDD. I pressed the button for additional options and clicked format.After about 4-5 seconds it said it has been formated (although it seemed a little bit too quickly for me) and I continued to install. It gets to the install screen and shows "Copying Windows Files 0%...". It quickly and somehow, without showing 100% done "skips" the step giving it a tick and moves to expanding the files. Expanding stays on 0% and nothing else. No indication of the DVD reading, no indication of the HDD writing. It just stays like that and...
NOTHING!!! This Windows 7 is from a torrent and the exact same edition is running on my PC, installed just fine. I tried several other CD's and on one of them it just got to the second restart and IT DIDN'T REBOOT! Even after waiting about 10 minutes it just did nothing. I restarted the laptop manually and then the install started from the beginning... Got any ideas what to do??? Please help, this is very VERY important!!!
Everytime I'm installing windows it fails and say that the is a missing or corrupted file.
View 2 Replies View RelatedI am trying to install Windows 7 64 bit on my system and it freezes during expanding files. I searched all forums and information thats available online, tried everything that was listed but no solution yet.
My system is Foxconn P9657AB-8EKRS2H LGA 775 Intel P965 Express ATX Intel Motherboard, Intel Quad Core Processor, 6 GB RAM on 3 slots, I had a 250 GB before this process but i bought a 1 TB 7200 RPM HD thinking that it would solve the problem somehow.
I took out all USB items including mouse & keyboard and using PS2 mouse/kb now. Also took out 2 RAMs leaving only one 2 GB. Now the machine only has the mother board, processor, video card, 2 gb ram, ps2 mouse & keyboard, and the monitors.
I checked BIOS, and i have the latest update. Tried everything on BIOS from setting it to Safe Mode, Disabling all USB ports, Internal Audio Device, and pretty much everything that i found online. Im just yet to flush the BIOS, change DVD drive and install it from a flash drive.
My laptop was running windows 7 and then crashed. It was getting slower and slower, then crashed during a virus scan in safe mode. After that, it wouldn't boot up windows. It said something like disk error, press ctrl alt delete to restart. Safe mode doesn't work either. So now I'm trying to reinstall windows 7, and the installation fails when at expanding files. It says the files are corrupted and can't be installed. I've tried 3 diff windows 7 cds. It gives errors at different points during the expanding every time. Now its just hanging at expanding windows files (0%). Its been here for 20 mins so far.
View 9 Replies View RelatedSo I'm trying to install Windows 7 via XP SP2 but every time I try it gets to the expanding files part(27%) and cancels the whole installation saying Windows could not prepare the computer too boot into the next phase. I ran a chkdsk scan on the drive and unplugged all USB devices and some people said that Windows couldn't find the HDD Controllers so I installed my chipset drivers too but still nothing.I can't really format these partitions(especially C: since I need the XP installation on it to install Win 7)What could be cause of this? Can a damaged or missing bootsector(or bootmgr) be to blame?
View 2 Replies View RelatedInstallations stops at " Expanding windows files 0 % " and stuck there, does not go further.
View 7 Replies View RelatedI wanted to install a fresh installation of windows 7 on my computer so I decided to load up my boot disc.
1. I deleted my partitions until I had a maximum of 233gb of free space.
2. I created a new partition from the free space. Windows setup suggested to make a primary partition of 100 mb.
3. System created two new partitions. One is primary partition (233 gb), the other is the system partition (100 mb)
4. Proceeded to install windows on the new partition created.
5. Copying windows files went from 0% to 100% instantly
6. Stuck at Expanding windows files at 0%.
7. Restarted my computer to boot up windows to see what's wrong.
8. Windows boot manager is missing, only thing I can do is reinstall windows but I can't
9. Can't do a startup repair cause it fails.
10. Did a cmd command for bootrec.exe /FixMbr and bootrec.exe /Fixboot and both operations are successful. However, still can't load up windows desktop.
Problem: I deleted my partitions and created new ones but I can't install windows onto the partition because the screen is stuck at expanding windows files at 0%. I got an error: 0x80070017. Windows cannot install required files. The file may be corrupt or missing. I also can't load into windows desktop because bootmanager is missing.
I have a custom built pc, has quad core phenom processor 4gb ram. Gigabyte motherboard 500gb hard drive with windows 8 preview installed. And a formatted 250gb. I'm trying to install windows 7 on the formatted drive but every time off cd hangs on expanding files. So I thought I'd try USB stick. Got a 16gb cruzer blade. Formatted and made bootable. Windows on it. Will start via my computer but whenever I try booting it on standup I get an error about not being digitally signed. I've tried numerous things but will not boot from USB.
View 3 Replies View Relatedwindows 7 installation taking too much time at expanding files showing 0% for intel i5 processor & 8GB ram.
View 5 Replies View RelatedOk I have noticed alot of people have had problems with this myself included, and the answer is almost too simple.The problem I was having was once I got to the expanding files step it would get to 89% within a few minutes. Then it would hang for hours stuck at 89%. I tried restarting the installation 4 times. The first time it only got to 9% and stalled.So on my fourth attempt after watching it hang for a good 2 hours I ejected the installation disk in the middle of installation and popped in another another Windows 7 RC installation disk that I forgot I had just to see what would happen. What happened is it immediately finished expanding from 89% and the installation was complete in about 20 minutes.I should note that the first installation disk I was trying was a Memorex that had just been pulled from a jewel case prior to burning. The second disk I used was a Verbatim that had been burned some time ago and was actually pretty scratched up.Both of the disks where burned using the same .iso downloaded from MSDN using the same burner and ImgBurn as the burning software.
View 5 Replies View RelatedI have recently decided to try Windows 7 and made the necessary preparations. I am trying to build a dual boot system with the OEM 32bit Vista Home Premium and 64bit Windows 7. My machine is far above the specs and I have 3gb ram. I burned the image twice after reviewing the other posts in the forum. I burned the first on at 8x and after reviewing prev posts I burned again at 4x. Both freeze at the expanding files 0%. The first one would hang for hours until I told it to cancel. The new one hangs for a few minutes and then gives an error that there is a corrupt or missing file.I also read that this may be a result of ACHI but my bios does not allow me to disable.
View 7 Replies View RelatedI'm trying to upgrade to Windows 7 from Vista Home Premium.
I got the upgrade from DigitalRiver, in 32 bit as suggested by my very techie brother. I run the install, everything seems fine, but it seems to get "hung up" at 48% in the last step (I think it's "Expanding Files?") The cursor still moves, and the ellipses are still progressing, but it doesn't move beyond that. I've tried three times, leaving it overnight for 9+ hours, and nothing beyond 48%!
I have an HP Pavillion dv6000 with Vista Home Premium 32bit, Core2Duo processor, 2GB Ram.
I tried many times to install 7 ultimate but it just freezes at expanding files even the 3 dots freeze i tested my ram and disc for errors but everything is ok i left only 1 ram but nothing i disabled all the peripherals in my mobo but nothing also checked my hdd for errors and its ok aswell..xp and vista install without problems..
System Specs: MSI 975x Platinum PowerUp Edition
Intel Core 2 Duo E6600
2X1GB DDR2 Memories
EVGA 9800 GTX+
Seagate 320GB
Okay i can get the windows installion all the way to part 2 installing windows where it says expanding files it will get to around the high 80% or 90% complete then i will get an error that says windows cannot access the installion sources verify that the installation sources are accessible, and restart the installation. And i restart and try again and it gives me the same thing.
View 2 Replies View RelatedI deleted all my hard drive partitions and formatted my hard drive to wipe it clean. Now when I try to install Windows 7 onto my computer, the DVD boots and the installation begins. The installation will complete the "Copying windows files" task in seconds, but sticks at 0% on "Expanding files" for about 30 seconds. I will then receive an error that reads "Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the application. Error code: 0x80070017".I researched this error but couldn't find a resolution. One suggestion was to download my hard drive's drivers onto a pen drive and load them in the installation, but t also tried installing Windows Vista and received the same problem.The error in this case has nothing to do with the copy. I have used many different Windows 7 builds, many different DVDs, burning at different speeds, all producing the same problemOnly when using the Windows 7 RC disc I was asked to "load drivers" as a requirement.Other builds didn't require me to load drivers.
View 9 Replies View RelatedI am trying to install windows 7 64 with a new M3A79-T. It keeps freezing at expanding files with error 0x80300001. I figure this might be due to missing sata drivers but when i click load drivers during the installationwindows doesn't recognize anything. I tried with the mobo support dvd and i tried burning drivers from the mobo website and using that dvd. In either case i can browse to the dvd but all the foldersin it are empty, so nothing to install even though the driver are definitely there. when i click on scan
View 7 Replies View RelatedI torrented a windows 7 install disc iso. I burned it to a disc but when i tried to install windows 7 it gets to "expanding files" and freezes at 0% . After that i tried using the exact same iso but from a thumb drive, and it worked. I tried the disc on multiple computers and it always sticks at 0% on expanding files. I have also reburned the iso multiple times and it still doesn't work. If i use a jump drive it always works. I know someone is gonna say that its the iso because i got it from a torrent, but the same iso works from a usb drive so it cant be that. I know someone is gonna say it is the optical drive, but i have tried it on 3 different computers with optical drives that i know work but it still sticks at 0% so its not that. Its also is not that i haven't waited long enough because i have left it for multiple hours and it still didn't move from 0%. I suspect that its an little feature in the burning program that i overlooked during the burn process.
View 2 Replies View RelatedI can't get past "Expanding Windows files" at 0%, the installer is also very slow. I get stuck at the wallpaper for around at least 5 minutes, and then I hang on "Starting install" for another 5. I've let it sit for around a half hour, and then it gives me an error saying I don't have all the files. Is this CD just DOA? (It's a CD from the software, it isn't a burned ISO etc.)
I'm trying to do a full install of 64-bit from 32-bit Vista.
I would do a USB flash drive, but I have no other computer than this one (other than my netbook) so I can't extract from the CD. I'm in the process of downloading an ISO from a torrent site, though.
My specs:
INTEL C2D E6750 2.66G 1333FSB
ASUS P5N-E SLI NFORCE 650I SLI MB
EVGA GEFORCE 8800GT 512MB PCI-E
500 GB SATA II 3.0 GB 16MB 7200RPM
I'm in the process of trying to expand my Windows 7 partition. However, I'm not entirely sure how to go about it in my particular circumstances.
I have about 7 gigs of unallocated space immediately prior on the drive to the System Reserved boot partition, with Windows 7 itself immediately following that.
Due to this layout I can't expand the Windows 7 partition directly; the partitioner also doesn't seem to offer any option to move either the boot or the 7 partition in front of the unallocated space to at least place the Windows 7 partition next to the unallocated space.
I would move the partitions with a different tool such as GParted, but I'm concerned that this may make it impossible to boot Windows 7 once again, as moving a Windows Vista partition once did.
I wonder whether anyone could offer some advice?
I love the Windows 7 Start Menu, and its versitality astounds me at times, but the inability for the "Computer" menu to be completely expandable cripples quite a bit of my productivity...
This problem does not exist with the personal menu, which quite frankly I could care less about completely expanding.
In general, Windows 7 has seemed to abandon the concept of expanding menus which can actually make things much much quicker at least for me, but I have gotten a separate toolbar working in the taskbar, but this seems inconvenient coming from someone who has always used classic menus on the Start Menu.
Don't get me wrong, I am very GLAD that Windows 7 makes such improvements to the way the start menu functions and in general these improvements have greatly added to my efficiency, but this really cripples someone like me!
I have two toolbars added to my taskbar; Remote and Games. When I hit Remote, I have like 15 or so RDP shortcuts in there. Sometimes I hit it, I see the proper height window open but it's just pure white with a black border for like 5 seconds until it pops the icons in there. I tried moving it from my regular drive to my SSD, didn't make any difference.
Has anyone seen a similar issue, and if so did you find a way to stop that?
I just bought a new laptop and they split the drive into a c and d partition which i dont want, I removed the d partition and then tryed to expand the c partition to the right but the expand is greyed out. I tryed expanding it with partition magic which also failed, anyone know why its not working or how i can perform the task?
Windows 7 home pro.
I have a System partition which is running out of space. Using GParted I took 1GB from the Data partition and made it unallocated. Now, how do I add that to the System partition?
View 6 Replies View Relatedi was wondering what would be the best upgrade wireless antenna for my lenovo laptop, here are some of the specs:
-Notebook: Lenovo Ideapad S10-3s (Ideapad S Series)
-Processor: Intel Atom N450
-Graphics Adapter: Intel Graphics Media Accelerator (GMA) 3150