7057 X64 Installation File Copying Error
Mar 20, 2009
I'm facing some trouble installing windows 7 x64 build 7057
When i click "install now" button after booting from the DVD-Rom. I get an error at times stating that i need DVD/CD-Rom Device Drivers and it does not detect the harddrive. However if i wait a little while before clicking the "Install Now" button, i pass on to Licence Agreement page.
From there i get a choice to Upgrade or Custom Install. If i chose upgrade it gives compatibility issue report as i do not have any OS running on the Drive i wan to Install Windows 7 on.
When i chose Custom i get to choose a partition. I chose the Primary Drive C partition as this 120GB hdd has no windows installed (my regular 500GB HDD that has winxp and vista64 is physically disconnected through this process). The Partition 1 has 29.8GB free when formated. I start the installation on that
The first Step "Copying Windows Files" takes few seconds and reaches 100% without error
The Second Step "Expanding Windows Files" stays on 0% for around 5 to 10 minutes and returns an error:
"Windows Cannot Install Required Files. Make Sure all files required for Installation are available, and restart the installation."
After I click 'OK', it says on the Screen "The installation was cancelled. Any changes that were made to your computer during the installation process will not be saved."
I do not understand if this is my hardware related issue or do i have a bad DVD. My DVD seems to be loading up fine and files do copy around from it. The ISO i copied this from seems to be ok. Could someone explain why am I facing this error and how can I solve it?
View 7 Replies
ADVERTISEMENT
Sep 13, 2009
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
View 9 Replies
View Related
Feb 20, 2012
After doing a copy and paste, we have, on 3 occasions so far, found the copied data in an entirely different file. Twice data from a copy appeared in an excel spreadsheet and once a picture copied in facebook appeared in an email. The excel problem is very worrysome as it is our family budget. how this could happen? In the case of the excel events no paste operation was intentionally done.
View 5 Replies
View Related
Jan 1, 2013
Not sure if this is in the appropriate area, sorry about that but i am having said error when trying to install/repair/remove anything with windows installer ?
View 15 Replies
View Related
Feb 20, 2011
As far as I know I have full administrative privileges and UAC is off. I am the sole user and this is the only account. I tried to install a new version of VMware Stand Alone Converter. I right clicked and ran as administrator. It asked about removing old version and I checked OK. It runs and pops up a box at end with this fault:
Error 1326. Error getting file security:
C:usersJoeSloclsvmwareGetlasterror:5
I'm running Windows 7 Ultimate 64 bit. This is the first software I've ever had a problem with. Is this a Windows problem or a VMware problem? Does VMware Workstation need admin privileges even though it's a separate program?
View 1 Replies
View Related
Oct 22, 2009
I have Vista Home Premium 64 bit and I'm trying to upgrade to 7. I bought the college copy so I only have the download, no DVD.
When I get to like 10% of installation I get error 0x80070241, and it says that a file is corrupted or missing and installation cannot continue.
I know everyone hates n00bs who ask questions that have already been answered, and I did google this first (and call Microsoft), but the results I found on google went right over my head and Microsoft was not helpful at all (I shot them off an e-mail thinking I might get better service that way, but they haven't responded yet.)
Anyway, what can I do? I really really want Vista off my computer but it like refuses to die lol.
View 7 Replies
View Related
Dec 9, 2010
The notorious (or at least I think it is,) "Copying-files-phase-instantly-cuts-to-100%-then-gets-stuck-at-expanding-files-0%-and-fails-after-some-time" bug.I'm almost to the point of challenging my computer fist to a fist-fight.The story: I ordered my Gateway M285-E Monday, and I just got it today. I was so happy to see that it already had Windows XP Tablet Edition installed. Of course, I'm one of those "f*** that noise" kind of people. I formatted the hard-drive from the Windows 7 installer, and upon starting the actual installation process, "Copying Files" jumped to 100%, and went directly to Expanding Files......which hung at 0%, until it gave me the usual error telling me that the needed installation files couldn't be found / located etc.
So I thought, why not install Windows XP? Didn't work either. The installer wouldn't recognize the hard-drive. Wonderful. So I sat in angst, staring at the beautiful machine that had just ruined my day....I installed Ubuntu 10.10; worked fine. Absolutely flawless.I CANNOT install ANY version of Windows. It just seems impossible. Windows 7: Failed.Windows XP: Failed.Windows ME (I was desperate):Failed.And after formatting again, Ubuntu 10.10:Worked.System specs:Core Duo @1.86ghz1gb RAM (soon to be 2gb)60gb HDDATi Radeon x1400 graphics
View 1 Replies
View Related
Jun 2, 2012
I've just got a new PC and while trying to copy over files from my old computer, I keep getting various BSODs (codes 24, A and others). These happen either during copying files between harddisks, or just creating RARs on harddisks. I suspected the old harddisks first, but the errors keep popping up even after disconnecting the old drive and just working with the new one. So after reading around on the forums a bit, my guess are a faulty harddrive or RAM. I already ran a chkdsk /r /f on all drives. I also tried the Windows built-in memory check with the default settings, which didn't seem to turn up any errors. I will try Memtest86 next. However, it would be nice if anybody else could have a look at the dump files, maybe it's something else entirely?
System Specs:
Windows 7 Professional 64bit OEM, original installation
System installation/age: a couple of days
[Code].....
View 4 Replies
View Related
Feb 19, 2011
I was transferring several 3GB files from one computer to another over a wired network. On one file, about 80% through, a message box came up saying there was a problem with the transfer. Two options: "Try Again" and "Cancel". Hit "Try Again", the progress bar finishes, and the file disappears from both computers. Search of entire hard drives finds nothing. What happened and why? Recovery software will probably not help me because both disks have been written to since the error.
View 3 Replies
View Related
Jun 15, 2011
I am wanting to copy my application data file from my PC (Win 7 Prof 64)to my laptop(win 7 hope premium). I have autocad user info etc and other prog info which has been stored in the roaming profile which I need to access on laptop. I want the same autocad settings available on laptop
Can I simply copy across the entire roaming profile or will this cause problems
View 2 Replies
View Related
Jan 21, 2011
copying a file to a Web Folder in Windows 7.I am able to connect to the web folder and see the subfolders. I am able to copy a local folder to the web folder as well. The only I am facing is when I am trying to copy a file. I am getting the error 0x80070057(The Parameter is incorrect). I have checked with fiddler and it does not look like its a server side issue. And I have also tried stopping most of the services as I read on the net that having 'Kaspersky' enabled and running interfered with the I/O for webdav.
View 1 Replies
View Related
Mar 19, 2012
I just recorded most of season 2 of the walking dead series yesterday. when i try to play the file in wmc i get the following message:
"Copying prohibited. The broadcaster prohibits this content from being copied. You can only play this content on the same computer on which it was recorded."
That is exactly what I am trying to do. Play it on the same computer I recorded it on.
View 9 Replies
View Related
Aug 28, 2009
for some reasons, while copying a 13 gb file over the network (accessed from servernamee$ to my C drive, the CPU usage is going close to 100%.
When I look at task manager, I see System using more than 30% of the CPU, SMC.EXE is using between 15% and 18%...
Does anyone have an idea why system is taking that much CPU?
I tried disabling the antivirus to reduce the SMC.exe process, without success..
View 7 Replies
View Related
May 17, 2011
WMC recording/playback and media/file sharing seems to work fine until I go to copy a file between drives, where one of those drives is currently using some of its i/o bandwidth to do media. The copy hogs the i/o bandwidth, doing nasty things to the real-time needs. How do I permanently tell Windows 7 x64 to do all [explorer] copies at a lower CPU and i/o (explorer.exe & system) priority and/or elevate WMC CPU & i/o (ehshell.exe?) and file/media sharing priorities a bit? The PC is up to date on patches/drivers and should be able to prioritize obvious applications.
View 2 Replies
View Related
Nov 1, 2011
while i am copying files from my hard disc to my pc, it is showing "can't read from the source file or disc.
View 3 Replies
View Related
Aug 26, 2011
I tried to copy songs from my comoac laptop to a fresh mmc but it failed with a message error code ox8007045D
View 1 Replies
View Related
Oct 20, 2011
Open error access is denied when copying
View 2 Replies
View Related
Dec 25, 2011
I am trying to move one pst file from one laptop which has Outlook 2010 32 bit to another laptop which has Outlook 2010 64 bit installed, steps taken 1) Copied the pst file from the User/AppData/Microsoft/Outlook folder to usb. 2) Pasted the file from usb into User/Documents folder. 3) Tried to open the file in Outlook and I get the error that Outlook encountered errors while opening the file. Now how is that possible when the file is working perfectly in one laptop but when I copy and paste it into another it gets corrupted? Is it due to 32 bit to 64 bit outlook? I tried to repair it using scanpst and it brought back few mails?
View 1 Replies
View Related
Jan 14, 2012
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
View 1 Replies
View Related
Apr 8, 2009
I know that the Windows 7 Homegroups only work with other PC with homegroup.But I'm trying to find my other computers running XP with my windows 7 laptop.
View 9 Replies
View Related
Mar 26, 2009
This is only occuring whilst using IE8, usually opening a new tab or clicking a link.....
Any ideas??
System spec is...
Processor: Intel Core2Duo T8300 (2.4Ghz) Chipset: Intel 965 Express (800Mhz FSB) (Inc: onboard 965 graphics) Memory: 2Gb OCZ PC2-6400 Network: Atheros AR5007EG (802.11g)
View 7 Replies
View Related
Apr 12, 2009
Finally got windows 7 installed after about an hour, then after all the restarts and boots, finally logs in...
and i find that although my usb mouse is working fine, my Windows Multimedia Keyboard isn't working at all.
I tried installing the 7 beta of intellitype but no difference. Also after restarting Windows 7 it now gets stuck at the boot logo...
seems like i should download and install either 7077 or just go back to 7000..
View 2 Replies
View Related
Mar 13, 2009
Are branch builds of RC1 capable of using windows update to bring it up to the later RC builds? or will it be like the beta's and require a fresh install or upgrade?
I ask, because if 7057 is a RC branch build, then it would be convenient if I could just use windows update the rest of the time until the full version is released.
View 6 Replies
View Related
Mar 25, 2009
Is it possible to upgrade from 32 bit to 64 bit, I reckon the answer is no, due to the architecture change ?
Also if I was to change from 32 bit to 64 bit, what - In laymans terms - would I notice different?
All my hardware is fine, and I have 4gb RAM.
1. Is it Possible
2. Whats the Main Difference I will see.
View 5 Replies
View Related
Jan 17, 2009
I installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...
View 9 Replies
View Related
Mar 22, 2009
I upgraded from 7000 x64 to 7057 x64 and now I can't load unsigned drivers even after changing the option in advanced options with boot into F8. I use a Rosewill RNX-G300E wireless PCI adapter so I can't connect to the internet.
View 0 Replies
View Related
Mar 15, 2009
If you want to revert back to build 7048 without having to do a fresh install and re-install all your programs you CAN actually do an "Update" from Windows 7 7057 to 7048.
You'll just get a Warning that the version is older than your current and that a device or two might not work --mine indicated the Motorola sm56 fax modem -- but I've got the driver for that anyway if I want to use it.
This leads creedence to the fact tha 7057 was "an Interim" build never intended for serious development use whereas build 7048 was actually part of the "True" development cycle.
Maybe my English might be mis-understood here -- I am NOT implying that build 7057 is a FAKE but just that it is a "testing" type build designed to check out certain parts of the process -- for example a lot of people experience longer install times before the Language menu comes up (perversly the better your gear the longer it takes to "start").
My advice would be that if you haven't installed 7057 don't bother --stay with 7048 until the next decent "leaked build" or the official RC1.
At least you won't have to look at the HIDEOUS logon screen.
View 9 Replies
View Related
Mar 19, 2009
Im running build 7057 on my Asus G50vt-X1 laptop and for some reason when I go to shutdown it will freeze on the shutdown background and not shut down. I'm not quite sure why. I have manually changed the logon and shutdown backgrounds via a regedit but it wouldn't complete the shutdown long before that. Any ideas?
View 4 Replies
View Related
Mar 13, 2009
Is this okay? Has anyone done this? I read some problems in general when upgrading one version of Windows 7 to another, but is this common?
View 9 Replies
View Related
Mar 25, 2009
In 7057, I cannot switch on the autologin anymore. It was previously switched on using the command control userpasswords2 followd by selecting the auto login option. However, the command doesn't show me this window anymore.
View 6 Replies
View Related
Mar 16, 2009
Do any of creative's drivers work with this build? I can't seem to get any sound.
View 6 Replies
View Related
