Is it possible to upgrade from 32 bit to 64 bit, I reckon the answer is no, due to the architecture change ?
Also if I was to change from 32 bit to 64 bit, what - In laymans terms - would I notice different?
All my hardware is fine, and I have 4gb RAM.
1. Is it Possible
2. Whats the Main Difference I will see.
Is this okay? Has anyone done this? I read some problems in general when upgrading one version of Windows 7 to another, but is this common?
View 9 Replies View RelatedCan someone confirm that it's a general problem or have I just got a bad D/L.
If I try and UPGRADE from Windows 7 build 7048 X-64 to Build 7057 X-64 it starts OK but after a while (during the expanding files stage) I get error -- some necessary files for installation cannot be copied ??
Clean install seem to wok.
HA1 and checksums of my iso seem correct.
Actually upgrading from a beta to another beta is not a goood idea anyway but I want to make sure that I haven't got a bad D/L before I try an upgrade from a Vista installation.
After I upgrade Windows 7 from build 7022 to 7057 my startup now is really slow. I see boost-screen 4 minutes. Restart was 405 sec. I removed unnecessary services, startup programs, defarg my registry, did a clean install, but nothing of that works.
View 4 Replies View RelatedThis is only occuring whilst using IE8, usually opening a new tab or clicking a link.....
Any ideas??
System spec is...
Processor: Intel Core2Duo T8300 (2.4Ghz) Chipset: Intel 965 Express (800Mhz FSB) (Inc: onboard 965 graphics) Memory: 2Gb OCZ PC2-6400 Network: Atheros AR5007EG (802.11g)
Im running build 7057 on my Asus G50vt-X1 laptop and for some reason when I go to shutdown it will freeze on the shutdown background and not shut down. I'm not quite sure why. I have manually changed the logon and shutdown backgrounds via a regedit but it wouldn't complete the shutdown long before that. Any ideas?
View 4 Replies View RelatedDo any of creative's drivers work with this build? I can't seem to get any sound.
View 6 Replies View Relatedwhen i right click "computer" and then choose "manage" i get the following error:
i went to the specified folder and the file opens OK from there.
also it's associated properly in the default programs control panel.
i must mention the i upgraded to this build from build 7000.
I've upgraded windows 7 from build 7000 to build 7057 (totall reinstall not just upgraded). My pc is connected to the TV (for movies and such), when the computer boots both displays work fine. After logon however I cannot get the second display to work. I can expand them all I want but, it simply won't work.
View 1 Replies View RelatedIf you really dislike the pale blue logon screen with that ridiculous "Peace Dove" (ZAP it someone) please then GOOD news.
Stardocks LOGONSTUDIO works on both X-86 and x-64 versions of Windows 7 including build 7057 (which is the one with the hideous Dove on it and the pale blue insipid colour).
Whilst the supplied screens aren't very adventurous you can download others or "Roll your Own".
Maybe we should have a competition here -- It's a bit difficult to post the image as one hasn't logged in yet --so you can't capture the screen.
I might have a go by using a VM and then capturing the Virtual Machine image from the Host OS.
Are branch builds of RC1 capable of using windows update to bring it up to the later RC builds? or will it be like the beta's and require a fresh install or upgrade?
I ask, because if 7057 is a RC branch build, then it would be convenient if I could just use windows update the rest of the time until the full version is released.
If you want to revert back to build 7048 without having to do a fresh install and re-install all your programs you CAN actually do an "Update" from Windows 7 7057 to 7048.
You'll just get a Warning that the version is older than your current and that a device or two might not work --mine indicated the Motorola sm56 fax modem -- but I've got the driver for that anyway if I want to use it.
This leads creedence to the fact tha 7057 was "an Interim" build never intended for serious development use whereas build 7048 was actually part of the "True" development cycle.
Maybe my English might be mis-understood here -- I am NOT implying that build 7057 is a FAKE but just that it is a "testing" type build designed to check out certain parts of the process -- for example a lot of people experience longer install times before the Language menu comes up (perversly the better your gear the longer it takes to "start").
My advice would be that if you haven't installed 7057 don't bother --stay with 7048 until the next decent "leaked build" or the official RC1.
At least you won't have to look at the HIDEOUS logon screen.
I tried installing the upgrade build 7057 over 7000 (x86) and it seemed to work fine. But then Windows 7 boots into the message "preparing your desktop for first use". It follows the message "Setup will continue after restarting your computer" and after ca. 1 Minute it restarts and does exactly the same. I tried that for about 5 times and it keeps doing that. No error messages.
Did anybody have this problem as well? Any ideas for troubleshooting?
Addition: I have just seen that people have problems with Norton 360, which I have installed, too. Maybe I can boot into safemode and remove Norton - I will try this tonight and report.
I am currently running OS 7 Beta RC Build 7100. Were do I get this newer version, is there a big difference? And am I able to upgrade to the newer Beta?
I realize that October is fast approaching for the RTM but I plan to keep running the Beta for a couple of months past the Grand Opening.
Is it possible that all the updates that I have received equally add up to the newer build?
I have a couple of questions pertaining to my new pc build that is being shipped to me. I am building a new computer using a Corsair Force GT 120gb SSD as my boot drive and a Seagate Barracuda 1tb drive for files and whatever else.When installing the SSD (my EVGA Z68 SLI has SATA 3) is there anything special I need to do? I assume there isn't, other than just plug it into the SATA 3 port and go. Now, once the computer is up and running, what must I do to get windows to install on it? I have read about changing from IDE to AHCI (not sure if my BIOS will have that or not but I will find out soon). Is there anything else? I also read that changing the boot priority to dvd rom first, SSD second, then the HDD third will help as well. Both drives are brand new so no partitions or anything, clean install. Second part, I bought the upgrade version of Windows 7 professional 64 bit and to install it, can I just pull out my old retail copy of Windows XP and install that first, then once it gets me to the desktop, reboot and do it all over again, this time installing the Windows 7 upgrade over it? In theory, I imagine this is how I would have to do it, but I am not positive so that is why I am inquiring.
View 5 Replies View RelatedI am building a new computer and my old one has windows xp on it. can i use the xp sticker on the old one to upgrade to windows 7 ultimate on the new one? if i use the old hard drive?
View 2 Replies View RelatedCan I use a Windows 7 Pro Upgrade DVD key to re-build my PC from scratch? I have Vista Business and want to get Windows 7 Pro but don't want to upgrade on top of. I want to format and install Win 7 Pro from scratch.
View 3 Replies View Relatedjust wondering how I should upgrade from Build 7100 to 7201?
And what exactly is the difference?
I want to upgrade my w.7 from build 7100 to 7264 but I have photoshop and other programs installed on build 7100 and I want to know if these program will still work without any problems after upgrading.
View 5 Replies View RelatedI am curently running Windows 7 Build 7127. Then I dowloaded Build 7600 (should be). Tried to install it, there was opytion to upgrade. But, when I click upgrade it said that no possibility for it. means that I shoul install cleanly.
View 6 Replies View RelatedHow do I do an in place upgrade from build 7264 to RTM?
View 2 Replies View RelatedCan i upgrade from the 7000 build to a new buld without losing any installed program/drivers or anything like that? Currently, i can't get my computer to boot properly and i want to change to a later build of windows 7 anyway, so i can do it just by upgrading?
View 5 Replies View RelatedI have Vista x64 right now and I keep wanting to install the 7100 build beta that I downloaded a while back. I plan to buy the 3 pack of Windows 7 when it comes out but I am wondering if installing the beta build now will make upgrading harder down the road. Doing a clean install is just way to hard considering all the terrabytes of programs and data that I would have to either re-install or manually try to put back into it's original places.
I know a lot of people preach that doing clean installs is so much better. In my experience this has never really helped. I have on numerous occasions done clean installs and they never did seem to work any better or any faster than the upgrades that I have had installed for years. The only time I think you need to do a clean install is if you have stability issues with your hardware causing your OS to go flaky or if you neglect your OS and leave all kinds of crap floating around on it. We have one machine running Windows 2000 since 2000 and it is used daily without any problems or corruption whatsoever.
I don't post often, but I do read a lot, and there is a lot of good info here. Background: I am running a dual boot Win XP (32 bit) and Win 7 RC 7100 (32 bit). I have the Digital River WIN Pro Upgrade (32 bit). I have read the UNAWAVE downgrade scenario from Ultimate to Pro and the WIN XP to WIN 7 PRO upgrade here.
I am debating which OS to change. I really like the RC version and have been using it for quite a while. But since it is my main OS, I would hate to screw it up doing the downgrade as suggested by UNAWAVE.
If I upgrade the WIN XP OS, I am not sure If I would still be able to dual boot between WIN 7 RC and WIN 7 Pro.
If I do upgrade XP to PRO, would I be able to use WET to transfer my settings from RC to PRO. I am leaning towards the downgrade option, but wanted some more input from the "experts".
When upgrading from 7048 to 7077 the installer freezes on the last step (copying files and settings) at 35% every time I've tried it. It suggested removing ATI Catalyst Install Manager and Control Panel, which I did, but it still hangs (although this time at 47%). I have tried several different configurations (with/without CCC and Install Manager, do/don't go online for updates, etc). Every time I have to force restart the computer and it will begin to restore the previous version.
View 4 Replies View RelatedI'm running 32-bit build 7231 and want to upgrade to 7260. Yeah, I know that a clean install is preferred, but I want to test out the upgrade instead.
When I go to install it from the existing build, it complains about the version. So, I went into the cversion.ini file and change MinClient to 7000, thinking that would fix it. But it still complains.
So, is there more to it than that? OR is it that this build simply can't be installed as an upgrade?
There is some debate in my class about if one can put an upgrade disc on a new hdd? Where there is no recent OS installed at all.
View 9 Replies View RelatedMy old pc was lost in a recent move, and I decided to build my next one from scratch. Before it was lost, I had purchased a student version Windows 7 pro upgrade disc, as I was planning on upgrading from XP x64. My question is, is there a way to do a clean install from this upgrade disc, and if not, what is the cheapest windows I can install in the meantime?
View 2 Replies View RelatedI just got my computer up and running today. My next step is to install win 7 on it. So i got win 7 pro 64 bit through digital river with a sweet student discount and also a back up disc that came in the mail. I have noticed that it says upgrade on it though. I have been hearing and being told so many different things that i can not tell what is true.
Please only post an answer if you are certain it is correct
Thank you and with that being said here are my questions
Questions:
Could someone please explain to me what i am exactly supposed to do with the backup disc?
Can i use this on a new computer, ie one without any os on it already?
A friend referred me to this site. It sounds very confusing and i am not very tech savvy when it comes to things like this. Will i need to install it onto a different computer in order to do this boot-able upgrade? does the back up disc come into play? Could someone please explain the instructions in a very simplistic way.
http://www.notebooks.com/2009/10/22/how-to-make-the-student-discounted-windows-7-upgrade-bootable/
Any other ideas or solutions to getting win7 upgrade version onto a new system build?
So I'm building a new computer completely from scratch, save for the hard drive, which I'm recycling from my old system. The hard drive currently has Windows XP installed.
My question is, can I upgrade the system with this? [URL]
Also, I plan to eventually buy a new hard drive. This presents a dilemma, because at the moment I can only afford the OEM or Upgrade versions of Windows 7. I read an article on PC World that claims there is a way to do a clean installation of Windows 7 using an Upgrade license. Here's the article: [URL]
Anyways, is that method still valid? Have any of you guys heard of it before?
I'm considering buying the Upgrade version of Windows 7 Home Premium, but I do not want to make the purchase only to realize later that I can not use it.
Really, I'm just looking for a solution. The only thing keeping me from buying Windows 7 OEM is the installation limits (can only install on one computer per license). When I get my new hard drive, I'd like to be able to use whatever version of Windows 7 that I own on it.
I bought a Sony Vaio laptop with Vista and a promised upgrade to Windows 7 when officially released. To jump start, I installed Windows 7 RC Build 7100 from Microsoft over the shipped Vista OS.
I just received the promised Windows 7 upgrade fulfillment from Sony but when I try to install it it tells me that Windows 7 is already installed (duh.)
Is the RC based Windows 7 installation that I've built up over the last few months now junk bits or is there a way to use the serial number on the proof of license sticker on the fulfillment install disk Sony sent me and associate it with my current RC installation to make it legal and avoid any future trouble?
I'd ask Sony but they haven't responded to anything else I've asked about so I'm not sure there are any actual people left in their "service" arm.