I am curently running Windows 7 Build 7127. Then I dowloaded Build 7600 (should be). Tried to install it, there was opytion to upgrade. But, when I click upgrade it said that no possibility for it. means that I shoul install cleanly.
View 6 Replies
This is a problem that sometimes crops up with various laptops for reasons I can't understand.
I have ONE laptop where typing input sometimes causes the cursor to jump randomly all over the place. This is UNPREDICTABLE so making typing input such as a Word document totally impossible without looking 100% at the screen.
This behaviour I've seen on a few laptops with various versions of Windows.
However Disabling the Touchpad (I hate those anyway) seems to fix it.
The Generic synaptics touch pad driver seems to work for most laptops I've seen which show this behaviour. Use this driver to disable the touchpad and the problem goes away. There's a 64 bit version too.
I am having lots of small problems after upgrading from 7100 to 7127. I am using x64 and since the time I have upgraded, the whole machine has become extremely slow.
Earlier it used to be extremely quick in bootup and shutdown etc. Now it takes almost double the time to startup and shutdown. I am using a 256GB SSD and it is making a major difference in speed now.
I am planning to do a fresh install of 7127 x64 but any ideas guys?
I started the computer today and after logging in, the desktop turned to a black screen, with 'Build 7600-This copy of windows is not genuine'.No start button or anything.I pressed Ctrl+Alt+Del and started cmd, as that was the only thing that worked. Then I noticed, that instead of the usual "C:User" prompt, it instead read "C:found.000dir0001.chksystem32>"I tried running the registry editor, but that would not start.The installation disk does not work either.
View 9 Replies View Related2 days ago this appeared on my desktop and although I can still use my computer the desktop background is black and in the bottom right corner it says Windows 7 build 7600 is not genuine. I dint get any product key from the dealer. when i bought the laptop it said windows is activated and it is genuine.
[code]...
All of a sudden I have this message in the corner of my screen- Windows 7 Build 7600- This copy of Windows is not genuine. The last thing I changed in my system was adding an SSD which was about 3 months ago now, and haven't had any problems. It is on Windows 7 Ultimate and I have had it installed for nearly 2 years now(jan 2011).
Here is the info I believe is required-
Code: Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: 0xc004c4a2
Windows Product Key: *****-*****-PBK92-KWTRM-7FQ86
Windows Product Key Hash: 0ojg7y87+6j4X6NsORHutDvdGCo=
Windows Product ID: 00426-068-4387193-86872
Windows Product ID Type: 5
[Code] .....
A few pop-ups lead me to some kind of Windows validation where after a few minutes it came up with the message- "The product key used to activate Windows on your PC is already in use on another PC or has been blocked by Microsoft. Not to worry, we can assist you with that."
I'm installing Windows 7 Beta x64 Build 7600 with a 4.7GB DVD but once it gets to the 'finishing installation' part it seemingly reboots (I think?) to continue with the install but the thing is at this point in time for me the screen goes blank and all I see is the cursor which I can move around. If I power it off and then turn it back on the loading screen comes up but when I get to the log on screen the same thing happens again.
The exact same thing happens to me with Vista. I installed it like three times (the difference is on Vista it gets past the install but still won't get past the logon screen so I can never shut down, restarting is fine though for some reason) and I'm being forced to roll back to 64-bit XP which to be honest I really don't want. So far I've detected that it's not the DVDs. It might be the RAM but I replaced both temporarily and that didn't work either.
when i try to upgrade to build 7600 i get the error "You can�t upgrade this pre release version of Windows 7. Go on-line to see how to install Windows 7 and keep your files and settings." is this a know issue or am i doing something wrong?
View 7 Replies View Relatedwhat do i do my window 7 has "this copy of window 7 is not genuine build 7600" and my system is slower than before.i used HIJACKTHIS software to scan it?
View 2 Replies View RelatedI built my own computer, used the 7 Beta version until I bought my own Ultimate version. Have been running that since it first came out and earlier this week, this error popped up. Ran a bunch of scans with no fixes. I also tried a system restore, but it wouldn't let me.
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: 0xc004c4a2
Windows Product Key: *****-*****-CFRV7-PHFGQ-CX46X[code].....
I am currently running OS 7 Beta RC Build 7100. Were do I get this newer version, is there a big difference? And am I able to upgrade to the newer Beta?
I realize that October is fast approaching for the RTM but I plan to keep running the Beta for a couple of months past the Grand Opening.
Is it possible that all the updates that I have received equally add up to the newer build?
Is it possible to upgrade from 32 bit to 64 bit, I reckon the answer is no, due to the architecture change ?
Also if I was to change from 32 bit to 64 bit, what - In laymans terms - would I notice different?
All my hardware is fine, and I have 4gb RAM.
1. Is it Possible
2. Whats the Main Difference I will see.
I have a couple of questions pertaining to my new pc build that is being shipped to me. I am building a new computer using a Corsair Force GT 120gb SSD as my boot drive and a Seagate Barracuda 1tb drive for files and whatever else.When installing the SSD (my EVGA Z68 SLI has SATA 3) is there anything special I need to do? I assume there isn't, other than just plug it into the SATA 3 port and go. Now, once the computer is up and running, what must I do to get windows to install on it? I have read about changing from IDE to AHCI (not sure if my BIOS will have that or not but I will find out soon). Is there anything else? I also read that changing the boot priority to dvd rom first, SSD second, then the HDD third will help as well. Both drives are brand new so no partitions or anything, clean install. Second part, I bought the upgrade version of Windows 7 professional 64 bit and to install it, can I just pull out my old retail copy of Windows XP and install that first, then once it gets me to the desktop, reboot and do it all over again, this time installing the Windows 7 upgrade over it? In theory, I imagine this is how I would have to do it, but I am not positive so that is why I am inquiring.
View 5 Replies View RelatedI am building a new computer and my old one has windows xp on it. can i use the xp sticker on the old one to upgrade to windows 7 ultimate on the new one? if i use the old hard drive?
View 2 Replies View RelatedHere's my setup, I was dual booting XP and Windows 7 RC1 7100 on two separate partitions and that was going swell.
When I found out 7127 got leaked I decided to use GParted to clear my XP partition and I installed 7127 on that partition. I can still see my files from the RC1 7100 partition but my bootmanager doesn't recognize another operating system on my PC.
Can I use a Windows 7 Pro Upgrade DVD key to re-build my PC from scratch? I have Vista Business and want to get Windows 7 Pro but don't want to upgrade on top of. I want to format and install Win 7 Pro from scratch.
View 3 Replies View Relatedjust wondering how I should upgrade from Build 7100 to 7201?
And what exactly is the difference?
I want to upgrade my w.7 from build 7100 to 7264 but I have photoshop and other programs installed on build 7100 and I want to know if these program will still work without any problems after upgrading.
View 5 Replies View RelatedHow do I do an in place upgrade from build 7264 to RTM?
View 2 Replies View RelatedCan i upgrade from the 7000 build to a new buld without losing any installed program/drivers or anything like that? Currently, i can't get my computer to boot properly and i want to change to a later build of windows 7 anyway, so i can do it just by upgrading?
View 5 Replies View RelatedI have Vista x64 right now and I keep wanting to install the 7100 build beta that I downloaded a while back. I plan to buy the 3 pack of Windows 7 when it comes out but I am wondering if installing the beta build now will make upgrading harder down the road. Doing a clean install is just way to hard considering all the terrabytes of programs and data that I would have to either re-install or manually try to put back into it's original places.
I know a lot of people preach that doing clean installs is so much better. In my experience this has never really helped. I have on numerous occasions done clean installs and they never did seem to work any better or any faster than the upgrades that I have had installed for years. The only time I think you need to do a clean install is if you have stability issues with your hardware causing your OS to go flaky or if you neglect your OS and leave all kinds of crap floating around on it. We have one machine running Windows 2000 since 2000 and it is used daily without any problems or corruption whatsoever.
I don't post often, but I do read a lot, and there is a lot of good info here. Background: I am running a dual boot Win XP (32 bit) and Win 7 RC 7100 (32 bit). I have the Digital River WIN Pro Upgrade (32 bit). I have read the UNAWAVE downgrade scenario from Ultimate to Pro and the WIN XP to WIN 7 PRO upgrade here.
I am debating which OS to change. I really like the RC version and have been using it for quite a while. But since it is my main OS, I would hate to screw it up doing the downgrade as suggested by UNAWAVE.
If I upgrade the WIN XP OS, I am not sure If I would still be able to dual boot between WIN 7 RC and WIN 7 Pro.
If I do upgrade XP to PRO, would I be able to use WET to transfer my settings from RC to PRO. I am leaning towards the downgrade option, but wanted some more input from the "experts".
Is this okay? Has anyone done this? I read some problems in general when upgrading one version of Windows 7 to another, but is this common?
View 9 Replies View RelatedWhen upgrading from 7048 to 7077 the installer freezes on the last step (copying files and settings) at 35% every time I've tried it. It suggested removing ATI Catalyst Install Manager and Control Panel, which I did, but it still hangs (although this time at 47%). I have tried several different configurations (with/without CCC and Install Manager, do/don't go online for updates, etc). Every time I have to force restart the computer and it will begin to restore the previous version.
View 4 Replies View RelatedCan someone confirm that it's a general problem or have I just got a bad D/L.
If I try and UPGRADE from Windows 7 build 7048 X-64 to Build 7057 X-64 it starts OK but after a while (during the expanding files stage) I get error -- some necessary files for installation cannot be copied ??
Clean install seem to wok.
HA1 and checksums of my iso seem correct.
Actually upgrading from a beta to another beta is not a goood idea anyway but I want to make sure that I haven't got a bad D/L before I try an upgrade from a Vista installation.
I'm running 32-bit build 7231 and want to upgrade to 7260. Yeah, I know that a clean install is preferred, but I want to test out the upgrade instead.
When I go to install it from the existing build, it complains about the version. So, I went into the cversion.ini file and change MinClient to 7000, thinking that would fix it. But it still complains.
So, is there more to it than that? OR is it that this build simply can't be installed as an upgrade?
There is some debate in my class about if one can put an upgrade disc on a new hdd? Where there is no recent OS installed at all.
View 9 Replies View RelatedMy old pc was lost in a recent move, and I decided to build my next one from scratch. Before it was lost, I had purchased a student version Windows 7 pro upgrade disc, as I was planning on upgrading from XP x64. My question is, is there a way to do a clean install from this upgrade disc, and if not, what is the cheapest windows I can install in the meantime?
View 2 Replies View RelatedI just got my computer up and running today. My next step is to install win 7 on it. So i got win 7 pro 64 bit through digital river with a sweet student discount and also a back up disc that came in the mail. I have noticed that it says upgrade on it though. I have been hearing and being told so many different things that i can not tell what is true.
Please only post an answer if you are certain it is correct
Thank you and with that being said here are my questions
Questions:
Could someone please explain to me what i am exactly supposed to do with the backup disc?
Can i use this on a new computer, ie one without any os on it already?
A friend referred me to this site. It sounds very confusing and i am not very tech savvy when it comes to things like this. Will i need to install it onto a different computer in order to do this boot-able upgrade? does the back up disc come into play? Could someone please explain the instructions in a very simplistic way.
http://www.notebooks.com/2009/10/22/how-to-make-the-student-discounted-windows-7-upgrade-bootable/
Any other ideas or solutions to getting win7 upgrade version onto a new system build?
So I'm building a new computer completely from scratch, save for the hard drive, which I'm recycling from my old system. The hard drive currently has Windows XP installed.
My question is, can I upgrade the system with this? [URL]
Also, I plan to eventually buy a new hard drive. This presents a dilemma, because at the moment I can only afford the OEM or Upgrade versions of Windows 7. I read an article on PC World that claims there is a way to do a clean installation of Windows 7 using an Upgrade license. Here's the article: [URL]
Anyways, is that method still valid? Have any of you guys heard of it before?
I'm considering buying the Upgrade version of Windows 7 Home Premium, but I do not want to make the purchase only to realize later that I can not use it.
Really, I'm just looking for a solution. The only thing keeping me from buying Windows 7 OEM is the installation limits (can only install on one computer per license). When I get my new hard drive, I'd like to be able to use whatever version of Windows 7 that I own on it.
I bought a Sony Vaio laptop with Vista and a promised upgrade to Windows 7 when officially released. To jump start, I installed Windows 7 RC Build 7100 from Microsoft over the shipped Vista OS.
I just received the promised Windows 7 upgrade fulfillment from Sony but when I try to install it it tells me that Windows 7 is already installed (duh.)
Is the RC based Windows 7 installation that I've built up over the last few months now junk bits or is there a way to use the serial number on the proof of license sticker on the fulfillment install disk Sony sent me and associate it with my current RC installation to make it legal and avoid any future trouble?
I'd ask Sony but they haven't responded to anything else I've asked about so I'm not sure there are any actual people left in their "service" arm.
