This is only occuring whilst using IE8, usually opening a new tab or clicking a link.....
Any ideas??
System spec is...
Processor: Intel Core2Duo T8300 (2.4Ghz) Chipset: Intel 965 Express (800Mhz FSB) (Inc: onboard 965 graphics) Memory: 2Gb OCZ PC2-6400 Network: Atheros AR5007EG (802.11g)
Is it possible to upgrade from 32 bit to 64 bit, I reckon the answer is no, due to the architecture change ?
Also if I was to change from 32 bit to 64 bit, what - In laymans terms - would I notice different?
All my hardware is fine, and I have 4gb RAM.
1. Is it Possible
2. Whats the Main Difference I will see.
Im running build 7057 on my Asus G50vt-X1 laptop and for some reason when I go to shutdown it will freeze on the shutdown background and not shut down. I'm not quite sure why. I have manually changed the logon and shutdown backgrounds via a regedit but it wouldn't complete the shutdown long before that. Any ideas?
View 4 Replies View RelatedIs this okay? Has anyone done this? I read some problems in general when upgrading one version of Windows 7 to another, but is this common?
View 9 Replies View RelatedDo any of creative's drivers work with this build? I can't seem to get any sound.
View 6 Replies View RelatedCan someone confirm that it's a general problem or have I just got a bad D/L.
If I try and UPGRADE from Windows 7 build 7048 X-64 to Build 7057 X-64 it starts OK but after a while (during the expanding files stage) I get error -- some necessary files for installation cannot be copied ??
Clean install seem to wok.
HA1 and checksums of my iso seem correct.
Actually upgrading from a beta to another beta is not a goood idea anyway but I want to make sure that I haven't got a bad D/L before I try an upgrade from a Vista installation.
when i right click "computer" and then choose "manage" i get the following error:
i went to the specified folder and the file opens OK from there.
also it's associated properly in the default programs control panel.
i must mention the i upgraded to this build from build 7000.
I've upgraded windows 7 from build 7000 to build 7057 (totall reinstall not just upgraded). My pc is connected to the TV (for movies and such), when the computer boots both displays work fine. After logon however I cannot get the second display to work. I can expand them all I want but, it simply won't work.
View 1 Replies View RelatedIf you really dislike the pale blue logon screen with that ridiculous "Peace Dove" (ZAP it someone) please then GOOD news.
Stardocks LOGONSTUDIO works on both X-86 and x-64 versions of Windows 7 including build 7057 (which is the one with the hideous Dove on it and the pale blue insipid colour).
Whilst the supplied screens aren't very adventurous you can download others or "Roll your Own".
Maybe we should have a competition here -- It's a bit difficult to post the image as one hasn't logged in yet --so you can't capture the screen.
I might have a go by using a VM and then capturing the Virtual Machine image from the Host OS.
After I upgrade Windows 7 from build 7022 to 7057 my startup now is really slow. I see boost-screen 4 minutes. Restart was 405 sec. I removed unnecessary services, startup programs, defarg my registry, did a clean install, but nothing of that works.
View 4 Replies View RelatedI have built a computer almost exactly to the one that they had built for Jeff on Tested.com. Everything seemed to install fine and run smoothly. Recently, I have been getting BSODs and they seem to be somewhat random. Usually when I am watching movies/streaming online/listening to music in Zune or iTunes. I don't really understand why this is happening. I have been looking around the internet and many people say that memory could be the problem but I have tested it with the windows memory test tool, all results have come back with no errors. I for some reason cannot Memtest to run.
View 5 Replies View RelatedAll of these components are less than days old, bought new and put straight into this build. Keep getting a BSOD so I guess I'll try to give as much information as I can and hopefully someone can give me a hand.It's also worth noting that it seems to occur more frequently while playing Star Wars the Old Republic but has also occurred while not doing so. [code]
View 11 Replies View RelatedI have a new custom built computer put together by someone I work with. I have been plagued with problems and I think it's hardware related. I got my friend to reinstall Windows but it crashed several times before install completed. He said he tried on my SSD and Samsung HD but still the same problems occur.Ran Memtest and passed several cycles but tried again and got errors. I removed a ram stick and it passed but got a BSOD after 30 minutes of browsing the web. Then the other stick had the same problems but passed Memtest for 20 minutes until the text on screen garbled where errors are usually listed. I reran test and it passed for a long time. I have no overclock and everything is running at correct voltage. Seems to be very random and can happen when purposely restarting my PC or doing barely anything at all.I'm starting to think it's either the RAM or motherboard causing the problems. Here are my components-
i7 2600k
Gigabyte G1.Sniper 2 Z68
8 GB G.Skill 1866 Ram
ATI 6950
OCZ Vertex 3 120 GB SSD
1TB Samsung HD
Corsair HX850W PSU
I include my last batch of crash dumps since I had Windows reinstalled.I might have to RMA something but want to narrow things down.
OK so I built a system and after a frustrating bout with BSODs caused by a bad mobo (replaced) i finally got it to work. However i was just browsing the interwebs and i got a bluescreen in fact ive gotten several 3 have been stop code 3b
Specs
Windows 7 Ultimate
AMD FX-4100
ASUS Sabertooth 990FX
8gb of ram
560 Ti 1gb
ran memtest for 12 or so passes while i was at work no issues with it did a sfc/ scannow and all that good stuff. driver scanner is turning up clean thinking this is beyond my knowledge they happen every 3-4 days and its quite irritating. all dumps as of late attached
I've recently built a a computer for my sister out of spare parts. Every couple of hours it just seams to BSOD. I'm not the most skilled pc builder as I'm only 14. At first it just freezes but then it just goes to the blue screen. I have included a BSOD Dump and my system spec is as follows;
Motherboard: ASUS M3N HT Deluxe (MEMPIPE EDITION)
CPU: AMD Phenom X4 9550 @2.2GHZ (not overclocked)
Chip set: nForce 780a sli spp
Ram:4gb OCZ DDR2
HDD: 1x80gb sata, 1x120gb ide
GPU: ATI RADEON HD 4870 1gb
I am running a Windows 7 Ultimate 64 Bit and I have reinstalled it twice?
Got to be quick because I've already had a BSOD trying to post this. This is a new build. All new components. All kinds of error codes contantly. I've updated Bios, SSD firmware, all drivers I can find, did a clean reinstall of Windows 7, ran memtest86 twice (20 passes total) on both sticks no errors, ran chkdsk -no errors although I see one today from my bios resetting defaults to IDE instead of ACHI - my fault. Ran Driver Verifier and came up with a violation in Event Viewer but I don't know how to read it. And yes I wear ESD straps etc. when I work on it.Also no overclocking / unlocking - everything is stock / default.
View 9 Replies View RelatedI built this rig 3 weeks ago. Never had any glitches or problems. Just randomly today while web browsing I got a BSOD. I don't know how to access the BSOD files to see the cause. Can someone please help me troubleshoot, i've never dealt with this before. I don't overclock just so everyone knows. I ran prime 95 for about an hour with all passes and perfect temps.
View 17 Replies View RelatedI have built a few computers over the years and this is the first one that has had an issue that has totally stumped me. I have built it for the parents. Now as far as i can tell everything is fine with the build, but the computer is randomly BSOD,especially when running the WINDOWS VERIFIER, to catch the error (BSOD on startup).I have used a program to analyze the results of the Verifier and this is the result:
On Wed 5/23/2012 9:14:30 AM GMT your computer crashed
crash dump file: C:Windowsmemory.dmp
This was probably caused by the following module: ndisrd.sys (ndisrd+0x266E)
Bugcheck code: 0xC4 (0x40, 0x0, 0xFFFFF9800ED66C50, 0x0)
Error: DRIVER_VERIFIER_DETECTED_VIOLATION
[code]....
Already crashed 2 times today in 30 minutes. The first time i was just browsing, the second time i was playing Skyrim. This happens randomly every day. Windows 7 x64 This is what what i got from my latest crash.
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.256.1
ID:2068
[code]....
It is a new build and it runs fine with 2Gb of memory installed, but as soon as i insert a second memory stick it goes through BIOS and 2-5 seconds of the Windows Logo before a bluescreen flashes by and the screen goes black. It will reboot and perform a Windows repair but with the same result. Same thing happens if I install my graphics card.
since running on 2Gb of memory and on-board graphics isn't my plan
I just put together my new computer and I started getting a few different BSOD's. The mostrecent was a Page_fault_in_nonpaged_area. A memory management one happened yesterday also. I'll include the dump files so someone can check them out
View 9 Replies View RelatedI've recently replaced my Win7 (7100) x32 with the x64 version in order to make use of more memory (not yet installed). However, although the rig I'm using had no problems in x32, it keeps BSODing in x64. Are there any commonly known reasons for BSODs in x64 when not in x32?
I have all drivers installed, updated and seemingly working. I get a BSOD within about 20 mins of booting usually. No temp issues with CPU - all under 30 idle and BSOD isn't necessarily when the CPU is stressed.
Specs:
Quad Core 2.4 Q6600
Asus P5K Mobo
Asus 8800GTX
2*1Gb Corsair XMS2
I built this PC in February. From day one I have been getting random blue screen errors, with many different bug check and error codes. Bug check 109 seems to be the one I have seen the most. I have ran memtest on my RAM sticks, one came back clean after 8 passes, the other had errors. So I re-installed Windows with only the good RAM stick, and am still getting blue screen crashes. They are, however less frequent. I have downloaded and installed the latest drivers from the manufactures for all hardware components.
I haven't run into this much trouble setting up any of the other PCs I have built, so I am a bit lost trying to figure this out.
Here is a link to the minidump files that have been generated since my last Windows install. [URL] This is all the hardware in my system:
GIGABYTE GA-A75-UD4H socket FM1 motherboard
AMD A8-3850 Llano 2.9GHz Socket FM1 100W Quad-Core Desktop APU
Corsair Vengeance Blu 8 GB (2X4 GB) PC3-12800 1600mHz DDR3 240-Pin SDRAM Dual Channel Memory Kit CMZ8GX3M2A1600C9B
Western Digital Caviar Blue WD5000AAKX 500GB
LITE-ON DVD Burner - iHAS124-04
TP-Link TL-WN951N 300Mbps Wireless N PCI Adapter
SIGMA Power Engine SP-535 535W ATX12V V2.01 Power Supply
I finished building a day trading PC and had a BSOD last night with a 0x0000016 stop error. The minidump is attached. System Specs:
AMD A6-3650
Asus F1A55-M LX Plus M/B
8 GB DDR3 Ram
Sapphire Flex Radeon HD 6450
2 WD HDD's in RAID1
SeaSonic M12II 620 Bronze PSU 620Watt
3 Asus Monitors
Clean Install Windows 7 HP x64 with Important updates
Catalyst 12.4 Drivers
so i have come to conclude the blue screen happens when ever it wants and i took a picture on my phone so i have some info, (0x00000000000000000000041790, 0xFFFFFA80016A? after that i cant see any more cuz i had only a second to take the pic
also i attached the info suggested in the locked threads
I've been getting a BSOD sometimes on start up or shortly after. I've used the debugger to check the dump file and the driver that would appear to be faulty is dtsoftbus01 which from what I read is daemon tools. I had daemon tools on this computer at one point in time but I've since reformatted my hard drive so daemon tools shouldn't still be installed.
View 3 Replies View RelatedI did my first build a while ago but kept getting the Blue Screen of Death. I got a tech guy in to look at how I built it, do mem tests and hard drive tests and he said that the motherboard must be faulty. I then sent the motherboard back and they gave me a replacement.I now have put it back together and am STILL getting BSOD's or my screen just freezes. It can run for quite a while without crashing if I am just using facebook or just cruising the web but when I start using skype or play games or have a few different programs open it is more likely to crash. However it does crash even when I am just using Chrome.
View 9 Replies View RelatedI've recently built a new PC, it's my first build and I've managed to solve most problems that have occurred but I'm stuck on this one. It will load games fine if i load them straight from turning on the PC but if i run it for a while then load a game it resets itself, and doesn't leave and mini/memory dumps. The system runs fine normally and even with some old games but if i load a new game such as civilization 5 on steam or try running examples in UDK it resets.
Specs:
Mobo: Asus Maximus IV Extreme
CPU: Intel Core i7 - 2600k
Ram: 8GB G.Skill RipjawsX
Graphics: Sapphire Radeon HD 7970 3GB
PSU: Antec High Current Pro HCP -750
SSD: Samsung 830 256GB
HD: Seagate Barracuda 2TB
Cooling: Antec Kuhler H20 920
OS: Windows 7 64bit Home Premium
At first i thought it was overheating but I've checked and the CPU and graphics card don't reach anywhere near a hot temperature before it crashes. I've also taken it to a local computer repair shop and the tests they ran all passed (i don't know what the tests they ran are but i'm going to call them tomorrow and find out / tell them it still crashes)
I just purchased a new build, listed below, and cannot figure out why I am getting random hard freezes. There is no blue screen of death, just hard freeze required restart. I get about 3-5 a day.
GIGABYTE GA-H61MA-D3V LGA 1155 Intel H61 SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard
Seagate Barracuda ST500DM002 500GB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT
Intel Core i5-2500 Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000
Antec NEO ECO 620C 620W Continuous Power ATX12V v2.3 / EPS12V 80 PLUS Certified Active PFC Power Supply
XFX AMD Radeon HD 6870 900M 1 GB DDR5 DUAL MINIDP HDMI DUAL DVI PCI-E Video Card (HD687AZHFC)
I am running low on time, as my one month for newegg returns runs out soon. I lost a week having to RMA the hard disk already, as the first one that came was DOA. I have performed furmark for 20 minutes, no failure. Memtest overnight, no failure. Seagate tools, passed test (didn't do thorough long test). Prime95 CPU small FFT for 8 hours, no problem. Prime95 CPU blend for 3 hours, no problem. I have tried reinstalling windows 7, and I have updated the BIOS.
I built a computer about a month ago and ever since the first attempt to install windows it has been giving me blue screens. The computer is working someone fine most of the time now, but still has a daily to twice a day blue screen error. I have done everything that google has said (Memtest, driver updates, HDD diagnostics, BIOS update, check registry, scan for virus, etc.)
View 9 Replies View RelatedSystem Spec:
Intel Core i5-3570k
Asus P8Z77-Pro M/b
16GB DDR3 1600MHz RAM (2x8)
2x2TB 7200RPM, 64MB cache HDD's
1x500GB 7200RPM HDD
nVidia GeForce 8800GTS
Creative SoundBlaster Xtreme Gamer sound card
Linksys WMP600N wireless PCI card
Corsair HX650 PSU
1x Blu-Ray optical drive
1x DVD optical drive
This is a new computer build that I finished a few days ago. I've updated the BIOS, set up a RAID 1 configuration through Intel Rapid Storage Technology/through the BIOS. I installed Windows 7 x64 Ultimate and have begun to migrate my programs and data over from my previous machine. This process has been paused because I am experiencing BSOD. There are two which have occurred:
0x0000001a - MEMORY_MANAGEMENT
0x00000050 - PAGE_FAULT_IN_NON_PAGED_AREA
I ran a Windows Memory Diagnostic test overnight - no problems were found. I've updated all my drivers. I have followed the BSOD posting instructions and SF Diag Tool instructions, and also googled effortlessly regarding these Stop codes.