It is a new build and it runs fine with 2Gb of memory installed, but as soon as i insert a second memory stick it goes through BIOS and 2-5 seconds of the Windows Logo before a bluescreen flashes by and the screen goes black. It will reboot and perform a Windows repair but with the same result. Same thing happens if I install my graphics card.
since running on 2Gb of memory and on-board graphics isn't my plan
recently I upgraded my ram from 8 gb to 16. I've been getting some crashes after this and it only happens when im browsing never when im gaming.
My specs are:
Motherboard: P8P67 DELUXE ASusTEk
CPU: Intel (r) Core(TM) i5-2500k cpu @ 3.30 ghz
Memory: DDR 3 Vengenance LP
Graphic Card: NVIDIA GEFORCE GTX 580
OS: Windows 7 Professional x64 Service Pack 1
Sound: Nvdia High Def Audio * 2
Realtek High def Audi *1
Storage Devices: OCZ-Vertex 3 120gb SSD
[code]I upgraded board, memory, cpu and started getting these dumps and just can't figure out where they are coming from.Asus P8H67 MLX i5 2300 8gb G.Skill Sniper Series.Also upgraded GTX460SE video card but without any Dumps, had it about a month before the other parts were installed, but it has started driver crashing alot as of late. [code]
View 3 Replies View Relatedanyone no why this build is using so much memory?
i have 4gb and it seems to be using 97% of it with
nothing else installed but the os and drivers.
i tried installing avast! Antivirus but after the
reboot the system moves so slow i had to uninstall
it.didn't have no trouble with the last 3 builds.
In both build 7048 and 7068 I have massive memory leakage going on in the gadget sidebar, and can't solve the problem aside from restarting the process to clear the memory.
Is MS aware of this? And is there a fix in newer builds? Otherwise, any useful advice?
The wireless adapter does NOT appear in ipconfig! but Ethernet does.Ethernet works properly.Unable to rollback/system restore as all deleted (don't know how or why).There is no wireless connectivity and with a USB wireless adapter the same problem. Hardware installs and says working OK, but unable to connect to wireless also.
Ipconfig is:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Jabberwocky
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code].....
i have just built my computer it has the following:
NVIDIA GTX 550TI,
H61M-D2-B3 MOTHER BOARD
INTEL 3I 2120 CHIP
500GB SATA II WESTAN DIGITAL 16MG 7200G/S wd5000aakx
8GB RAM
lg gh24ns90 dvd rewriter
the problem is that im trying to install windows 7 onto the computer using a windows 7 disk but when the page asking me what to save the installation to, the partition list is blank. and it says that i need to install the drivers im guessing my hdd should come up on the list but it doesnt in both custom install and the advanced install, my hdd comes up on BIOS as fully working i have tried installing drivers for my motherboard during install page but it doesnt notice the install disc which came with the mother board, i have also downloaded a new driver for the motherboard on a different disk but the same thing comes up
I finished building a new computer today and everything was working fine, but when I select the custom/new installation of Windows 7, it brings me to a screen that claims Disk 0 Partition 1 is 2048 GB and OEM reserved. I've never done this before, so it's entirely possible that I'm missing something obvious, but given that the hard drive is only 1.5 TB it seems like something has to be wrong here. Is there a way for me to either safely delete that entire partition or to partition it into something I could actually install to?
View 4 Replies View RelatedI just finished building my first computer and I plan on using my HDTV as a monitor. The problem is that windows 7 is having trouble installing.
Whenever it boots is goes through the loading page and the "starting windows" page but when it gets to the choosing language, country, etc.screen it freezes and my keyboard and mouse are none responsive.I can enter the BIOS just fine and my keyboard and mouse work there.I think the problem might be related to resolution as I am using my HDTV. But I don't know why it would wait until that spot to stop working. Plus, I don't have a monitor to connect it to to fix the resolution. [code]
I'm not sure where online to go (what forum) to ask this question, so I will just start here.I build and sell PC's to small businesses. Well configured systems. No junk. I use as much free software as possible. Liscenses permitting. Quality software.I want to make a master system(s), just one master if possible. Windows 7 with all the apps, ready to go. I want to migrate this master(s) to other PC's.Supplying new license keys when needed.Worst case scneario, dis-similar hardware.
View 9 Replies View RelatedI have recently purchased a custom built PC from a company and I have included in it an SSD for the operating system and programs, and a 1TB HDD for storage both are brand new with no data installed. Once I receive the PC I will be installing my own copy of Windows 7 Ultimate 64 bit. I have read on a number of forums that I need to unplug the HDD before completing the clean install of Windows 7 onto the SSD otherwise the boot partition will install onto the HDD if I keep it plugged in. I cant find any user guides/videos tutorials for this situation so would appreciate it if someone could confirm if its best to disconnect the HDD as I dont want to start taking the side of the case and unplugging the HDD if its not required.
View 1 Replies View RelatedI am receiving a stop 7e error on install of windows 7 x64 on a new build pc.
View 9 Replies View RelatedI'm running 32-bit build 7231 and want to upgrade to 7260. Yeah, I know that a clean install is preferred, but I want to test out the upgrade instead.
When I go to install it from the existing build, it complains about the version. So, I went into the cversion.ini file and change MinClient to 7000, thinking that would fix it. But it still complains.
So, is there more to it than that? OR is it that this build simply can't be installed as an upgrade?
I've just finished my brand new build and am now ready to install Windows 7.
However when I load the disk select custom install and its asks me to select where I want the OS to be installed, I get an error message saying it cant find my HDD and I need to select the appropriate drivers.
I can see my Hitachi 500Gb in the BIOS, I have tried ATHC and IDT settings but still wont work. I have tried factory default setting in the BIOS but still Win7 cannot pick up my HDD.
The LED is flashing also to note that the Drive is working. Also Win7 wont let me format the disk either.
Setup:
Gigabyte GA-Z77-D3H Socket 1155 VGA DVI HDMI 8 Channel Audio ATX Motherboard
Corsair Hydro Series H60 High Performance Liquid CPU Cooler
Hitachi 500GB DESKSTAR 3.5" SATA-III - 7200RPM 16MB Cache 7K1000.D HDS721050DLE630
Casecom Shiny White Mid Tower Case with Front 120mm Blue LED Fan
Xenta Black Wireless 2.4GHz Multimedia Keyboard and Optical Mouse with Nano USB Receiver
Samsung SH-222BB 22x DVD±RW DL & RAM SATA Optical Drive - OEM Black
Intel i5 3450.
I have built a computer almost exactly to the one that they had built for Jeff on Tested.com. Everything seemed to install fine and run smoothly. Recently, I have been getting BSODs and they seem to be somewhat random. Usually when I am watching movies/streaming online/listening to music in Zune or iTunes. I don't really understand why this is happening. I have been looking around the internet and many people say that memory could be the problem but I have tested it with the windows memory test tool, all results have come back with no errors. I for some reason cannot Memtest to run.
View 5 Replies View RelatedAll of these components are less than days old, bought new and put straight into this build. Keep getting a BSOD so I guess I'll try to give as much information as I can and hopefully someone can give me a hand.It's also worth noting that it seems to occur more frequently while playing Star Wars the Old Republic but has also occurred while not doing so. [code]
View 11 Replies View RelatedThis is only occuring whilst using IE8, usually opening a new tab or clicking a link.....
Any ideas??
System spec is...
Processor: Intel Core2Duo T8300 (2.4Ghz) Chipset: Intel 965 Express (800Mhz FSB) (Inc: onboard 965 graphics) Memory: 2Gb OCZ PC2-6400 Network: Atheros AR5007EG (802.11g)
I have a new custom built computer put together by someone I work with. I have been plagued with problems and I think it's hardware related. I got my friend to reinstall Windows but it crashed several times before install completed. He said he tried on my SSD and Samsung HD but still the same problems occur.Ran Memtest and passed several cycles but tried again and got errors. I removed a ram stick and it passed but got a BSOD after 30 minutes of browsing the web. Then the other stick had the same problems but passed Memtest for 20 minutes until the text on screen garbled where errors are usually listed. I reran test and it passed for a long time. I have no overclock and everything is running at correct voltage. Seems to be very random and can happen when purposely restarting my PC or doing barely anything at all.I'm starting to think it's either the RAM or motherboard causing the problems. Here are my components-
i7 2600k
Gigabyte G1.Sniper 2 Z68
8 GB G.Skill 1866 Ram
ATI 6950
OCZ Vertex 3 120 GB SSD
1TB Samsung HD
Corsair HX850W PSU
I include my last batch of crash dumps since I had Windows reinstalled.I might have to RMA something but want to narrow things down.
OK so I built a system and after a frustrating bout with BSODs caused by a bad mobo (replaced) i finally got it to work. However i was just browsing the interwebs and i got a bluescreen in fact ive gotten several 3 have been stop code 3b
Specs
Windows 7 Ultimate
AMD FX-4100
ASUS Sabertooth 990FX
8gb of ram
560 Ti 1gb
ran memtest for 12 or so passes while i was at work no issues with it did a sfc/ scannow and all that good stuff. driver scanner is turning up clean thinking this is beyond my knowledge they happen every 3-4 days and its quite irritating. all dumps as of late attached
I've recently built a a computer for my sister out of spare parts. Every couple of hours it just seams to BSOD. I'm not the most skilled pc builder as I'm only 14. At first it just freezes but then it just goes to the blue screen. I have included a BSOD Dump and my system spec is as follows;
Motherboard: ASUS M3N HT Deluxe (MEMPIPE EDITION)
CPU: AMD Phenom X4 9550 @2.2GHZ (not overclocked)
Chip set: nForce 780a sli spp
Ram:4gb OCZ DDR2
HDD: 1x80gb sata, 1x120gb ide
GPU: ATI RADEON HD 4870 1gb
I am running a Windows 7 Ultimate 64 Bit and I have reinstalled it twice?
Got to be quick because I've already had a BSOD trying to post this. This is a new build. All new components. All kinds of error codes contantly. I've updated Bios, SSD firmware, all drivers I can find, did a clean reinstall of Windows 7, ran memtest86 twice (20 passes total) on both sticks no errors, ran chkdsk -no errors although I see one today from my bios resetting defaults to IDE instead of ACHI - my fault. Ran Driver Verifier and came up with a violation in Event Viewer but I don't know how to read it. And yes I wear ESD straps etc. when I work on it.Also no overclocking / unlocking - everything is stock / default.
View 9 Replies View RelatedI built this rig 3 weeks ago. Never had any glitches or problems. Just randomly today while web browsing I got a BSOD. I don't know how to access the BSOD files to see the cause. Can someone please help me troubleshoot, i've never dealt with this before. I don't overclock just so everyone knows. I ran prime 95 for about an hour with all passes and perfect temps.
View 17 Replies View RelatedI am the developer of a driver for a network adapter device that does scatter-gather DMA. Driver is not newly developed, but has had some recent changes.My client has a puzzling BSOD on one x64 machine after about 18 hours of successful operation. My x64 Win 7 machine runs fine forever. Client's box crashes in seemingly random places that indicate mem corruption.Mem test on machine was clean. Minidump is attached. WinDbg stack doesn't trace back to my code - it just shows the calls to handle the exception. Any clues y'all can see?System info from WinDbg:Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64Product:WinNt, suite: TerminalServer SingleUserTSBuilt by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506One difference between client's x64 and mine: Theirs has a valid DMA MapRegisterBase pointer from a AllocateAdapterChannel call, where mine (and my x86 systems) always have a null DMA MapRegisterBase
View 1 Replies View RelatedI have built a few computers over the years and this is the first one that has had an issue that has totally stumped me. I have built it for the parents. Now as far as i can tell everything is fine with the build, but the computer is randomly BSOD,especially when running the WINDOWS VERIFIER, to catch the error (BSOD on startup).I have used a program to analyze the results of the Verifier and this is the result:
On Wed 5/23/2012 9:14:30 AM GMT your computer crashed
crash dump file: C:Windowsmemory.dmp
This was probably caused by the following module: ndisrd.sys (ndisrd+0x266E)
Bugcheck code: 0xC4 (0x40, 0x0, 0xFFFFF9800ED66C50, 0x0)
Error: DRIVER_VERIFIER_DETECTED_VIOLATION
[code]....
Already crashed 2 times today in 30 minutes. The first time i was just browsing, the second time i was playing Skyrim. This happens randomly every day. Windows 7 x64 This is what what i got from my latest crash.
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.256.1
ID:2068
[code]....
I just put together my new computer and I started getting a few different BSOD's. The mostrecent was a Page_fault_in_nonpaged_area. A memory management one happened yesterday also. I'll include the dump files so someone can check them out
View 9 Replies View RelatedI've recently replaced my Win7 (7100) x32 with the x64 version in order to make use of more memory (not yet installed). However, although the rig I'm using had no problems in x32, it keeps BSODing in x64. Are there any commonly known reasons for BSODs in x64 when not in x32?
I have all drivers installed, updated and seemingly working. I get a BSOD within about 20 mins of booting usually. No temp issues with CPU - all under 30 idle and BSOD isn't necessarily when the CPU is stressed.
Specs:
Quad Core 2.4 Q6600
Asus P5K Mobo
Asus 8800GTX
2*1Gb Corsair XMS2
I built this PC in February. From day one I have been getting random blue screen errors, with many different bug check and error codes. Bug check 109 seems to be the one I have seen the most. I have ran memtest on my RAM sticks, one came back clean after 8 passes, the other had errors. So I re-installed Windows with only the good RAM stick, and am still getting blue screen crashes. They are, however less frequent. I have downloaded and installed the latest drivers from the manufactures for all hardware components.
I haven't run into this much trouble setting up any of the other PCs I have built, so I am a bit lost trying to figure this out.
Here is a link to the minidump files that have been generated since my last Windows install. [URL] This is all the hardware in my system:
GIGABYTE GA-A75-UD4H socket FM1 motherboard
AMD A8-3850 Llano 2.9GHz Socket FM1 100W Quad-Core Desktop APU
Corsair Vengeance Blu 8 GB (2X4 GB) PC3-12800 1600mHz DDR3 240-Pin SDRAM Dual Channel Memory Kit CMZ8GX3M2A1600C9B
Western Digital Caviar Blue WD5000AAKX 500GB
LITE-ON DVD Burner - iHAS124-04
TP-Link TL-WN951N 300Mbps Wireless N PCI Adapter
SIGMA Power Engine SP-535 535W ATX12V V2.01 Power Supply
I finished building a day trading PC and had a BSOD last night with a 0x0000016 stop error. The minidump is attached. System Specs:
AMD A6-3650
Asus F1A55-M LX Plus M/B
8 GB DDR3 Ram
Sapphire Flex Radeon HD 6450
2 WD HDD's in RAID1
SeaSonic M12II 620 Bronze PSU 620Watt
3 Asus Monitors
Clean Install Windows 7 HP x64 with Important updates
Catalyst 12.4 Drivers
so i have come to conclude the blue screen happens when ever it wants and i took a picture on my phone so i have some info, (0x00000000000000000000041790, 0xFFFFFA80016A? after that i cant see any more cuz i had only a second to take the pic
also i attached the info suggested in the locked threads
I've been getting a BSOD sometimes on start up or shortly after. I've used the debugger to check the dump file and the driver that would appear to be faulty is dtsoftbus01 which from what I read is daemon tools. I had daemon tools on this computer at one point in time but I've since reformatted my hard drive so daemon tools shouldn't still be installed.
View 3 Replies View Related